Hi everyone! I have a PCI NIC: RealTek 8029. the problem is this one: when i didnt put in my config file the line:"device ed0 at isa? disable port 0x280 irq 10 iomem 0xd8000" i couldnt use my NIC, and my NIC is on PCI(and ed0 is for isa)...The dmesg.boot file in this case is bad.boot(atached to this e-mail).When i put that line, i can use the NIC. In both cases the config files are the same(only that line is the difference)(the config file is atached to this e-mail:k).The dmesg.boot file in the case with that line is last.boot(atached to this e-mail). The second problem is why do i get those errors(at the begining of last.boot). In the case of last.boot i get this error(after root is logged in):dhclient: send-packet: Adress family not supported by protocol family. Thank you very much for reading this e-mail. And sorry for my English.
sory but i cant atach more files and i will show the the GENERIC dmesg.boot here: Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.9-RELEASE #0: Mon Oct 27 17:51:09 GMT 2003 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz CPU: Pentium/P55C (149.69-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x543 Stepping = 3 Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX> real memory = 50331648 (49152K bytes) avail memory = 43659264 (42636K bytes) Preloaded elf kernel "kernel.old" at 0xc053f000. Intel Pentium detected, installing workaround for F00F bug md0: Malloc disk npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 isab0: <Intel 82371SB PCI to ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX3 ATA controller> port 0xf000-0xf00f at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 ed0: <NE2000 PCI Ethernet (RealTek 8029)> port 0x6100-0x611f irq 11 at device 19.0 on pci0 ed0: address 00:4f:49:03:da:db, type NE2000 (16 bit) pci0: <Cirrus Logic GD5446 SVGA controller> at 20.0 orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0 pmtimer0 on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppi0: <Parallel I/O> on ppbus0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ad0: 2441MB <WDC AC22500L> [4960/16/63] at ata0-master WDMA2 ad2: DMA limited to UDMA33, non-ATA66 cable or device ad2: 19881MB <Maxtor 6E020L0> [40395/16/63] at ata1-master WDMA2 Mounting root from ufs:/dev/ad0s2a __________________________________ Do you Yahoo!? Free Pop-Up Blocker - Get it now http://companion.yahoo.com/
bad.boot
Description: bad.boot
last.boot
Description: last.boot
k
Description: k
_______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"