Problem installing FreeBSD 6.0
Hello, I'm trying to install FreeBSD 6.0 on a regular x86 PC. I'm using the official install disk. It tells me that there are no CD/DVD drives are detected. I have a Pioneer DVD writer (DVR-110D). That has ATAPI interface and I booted the installer from it... I also tried to install the system using a passive ftp connection. It start downloading the base distribution, and I get messages like: pid 125 (cpio), uid 0 inumber 514 on /: out of inodes Unfortunately, I cannot run any commands on the emergency terminal because there are no commands to execute at all. Can you help me please? Laci ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Problem installing FreeBSD 6.0
On Wed, 26 Apr 2006 10:34:44 -, User Gandalf [EMAIL PROTECTED] wrote: Hello, I'm trying to install FreeBSD 6.0 on a regular x86 PC. I'm using the official install disk. It tells me that there are no CD/DVD drives are detected. I have a Pioneer DVD writer (DVR-110D). That has ATAPI interface and I booted the installer from it... I also tried to install the system using a passive ftp connection. It start downloading the base distribution, and I get messages like: pid 125 (cpio), uid 0 inumber 514 on /: out of inodes Unfortunately, I cannot run any commands on the emergency terminal because there are no commands to execute at all. Can you help me please? Did you do a custom newfs? What's you partition layout? What did you install (only the bare base? or also additional distributions/packages) ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Problem installing FreeBSD 6.0
Did you do a custom newfs? No. What's you partition layout? First slice is a Windows NTFS, 45GB Then I have a 35GB slice for FreeBSD (type 165). Inside that slice, I used automatic partitioning. What did you install (only the bare base? or also additional distributions/packages) I selected the 'All binaries and doc but no games, kernel sources only' option. But the problem occurs while it displays: extracting base into / so probably it has nothing to do with the selected distros/packages. Laci ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Problem installing FreeBSD 6.0
Jeff Rollin wrote: could you post the partition layout? (i know you said you used automatic partitioning but the size of the filesystems varies depending on the size of the slice.) Slices screen: Disk name: ad0 Geometry: 14596 cyls/255 heads/63 sectors = 234484740 sectors (114494 MB) Offset| Size(ST) | End | Name | PType | Desc | Subtype | Flags 0 | 63 | 62 | - | 12| unused | 0 63| 92164842 | 92164904 | ad0s1 | 4 | NTFS/HPFS/QNX | 7 92164905 | 73384920 | 165549824| ad0s2 | 8 | freebsd| 165 165549825 | 68941118 | 234490942| - | 12| unused | 0 Partitions screen: Part | Mount | Size| NewFs| Part ad0s2a | / | 512MB| UFS2 | Y ad0s2b | swap | 4070MB | SWAP | ad0s2d | /var | 3059MB | UFS2+S| Y ad0s2e | /tmp | 512MB | UFS2+S| Y ad0s2f | /usr |27678MB | UFS2+S| Y I choose option 6 Kern-Developer - Full binaries and doc, Kernel sources only Then I get the error while I see this: Extracting base into / directory Best, Laci ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
RE: Problem installing FreeBSD 6.0
I had this problem when I was using an older model motherboard with only 64k memory. I moved HD to an newer pc to install FreeBSD to HD them returned HD to first box and all was ok. Then configured FreeBSD OS on older box with out any problems after that. Read 6.0 notes about dropped support for i386 cpu which I think is the cause of problem -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Nagy László Zsolt Sent: Wednesday, April 26, 2006 8:53 AM To: Jeff Rollin; freebsd-questions@freebsd.org Subject: Re: Problem installing FreeBSD 6.0 Jeff Rollin wrote: could you post the partition layout? (i know you said you used automatic partitioning but the size of the filesystems varies depending on the size of the slice.) Slices screen: Disk name: ad0 Geometry: 14596 cyls/255 heads/63 sectors = 234484740 sectors (114494 MB) Offset| Size(ST) | End | Name | PType | Desc | Subtype | Flags 0 | 63 | 62 | - | 12| unused | 0 63| 92164842 | 92164904 | ad0s1 | 4 | NTFS/HPFS/QNX | 7 92164905 | 73384920 | 165549824| ad0s2 | 8 | freebsd | 165 165549825 | 68941118 | 234490942| - | 12| unused | 0 Partitions screen: Part | Mount | Size| NewFs| Part ad0s2a | / | 512MB| UFS2 | Y ad0s2b | swap | 4070MB | SWAP | ad0s2d | /var | 3059MB | UFS2+S| Y ad0s2e | /tmp | 512MB | UFS2+S| Y ad0s2f | /usr |27678MB | UFS2+S| Y I choose option 6 Kern-Developer - Full binaries and doc, Kernel sources only Then I get the error while I see this: Extracting base into / directory Best, Laci ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Problem installing FreeBSD 6.0 on IBM ThinkCentre 8136-KSQ
Hi: The problem is that the network card is not detected, is a network card Boradcom in the mother board. I see a chip with this numbers: Broadcom BCM5751FKFB HS0521 P21 744910 N Whit dmesg | grep -i ethe I got: pci2: network, ethernet at device 0.0 (no driver attached) With pciconf -lv I got: [EMAIL PROTECTED]:0:0: class=0x02 card=0x02f71014 chip=0x167e14e4 rev=0x11 hdr=0x00 vendor = 'Broadcom Corporation' device = 'BCM5751F NetXtreme Fast Ethernet PCI Express' class = network subclass = ethernet The manual for bge(4), says: bge -- Broadcom BCM570x/5714/5721/5750/5751/5789 PCI Gigabit Ethernet adapter driver is this nic supported? TIA ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
RE: Problem Installing FreeBSD 6.0, asking for help
I believe you are saying that 5.2 is currently installed on the hard drive and you want to do a fresh install from scratch of 6.0. You have to change the pc bios setup to boot from the cd drive instead of from the hard drive. The pc will then boot from the 6.0 cd and install 6.0 destroying the 5.2 system on the hard drive along with any user data you had. After 6.0 is installed you have to change the bios back to booting from the hard drive. Be sure you have a backup of any user data on the 5.2 system you want saved. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of [EMAIL PROTECTED] Sent: Saturday, March 11, 2006 5:44 PM To: [EMAIL PROTECTED] Subject: Problem Installing FreeBSD 6.0, asking for help Hello, may I ask you for help with the following Problem: When I try to install FreeBsd6.0, there is the following error during the boot process (because the system is not able to boot from CD, I have to boot from floppy) occurs: ahc0: probe1:ahc0:0:1:0: SCB 6: immediate reset Flags 0x620 ahc0: probe1:ahc0:0:1:0: No longer in timeout, status=25b ahc0: Issued channel A bus reset, SCBs 6 aborted. ... ... ... There are variants of the messages with different SCB, flags and status. As a result, the install program does not find any disk. FreeBSD5.2 is running and dmesg produces the following output: Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2.1-RELEASE #0: Mon Feb 23 20:45:55 GMT 2004 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel /boot/kernel/kernel at 0xc0a35000. Preloaded elf module /boot/kernel/acpi.ko at 0xc0a351f4. Timecounter i8254 frequency 1193182 Hz quality 0 CPU: Intel Pentium III (797.97-MHz 686-class CPU) Origin = GenuineIntel Id = 0x686 Stepping = 6 Features=0x383f9ffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,M CA,CMOV,PAT,PSE36,MMX,FXSR,SSE real memory = 268369920 (255 MB) avail memory = 251047936 (239 MB) Pentium Pro MTRR support enabled npx0: [FAST] npx0: math processor on motherboard npx0: INT 16 interface acpi0: GBTAWRDACPI on motherboard pcibios: BIOS version 2.10 Using $PIR table, 6 entries at 0xc00fdee0 acpi0: Power Button (fixed) Timecounter ACPI-fast frequency 3579545 Hz quality 1000 acpi_timer0: 24-bit timer at 3.579545MHz port 0x4008-0x400b on acpi0 acpi_cpu0: CPU on acpi0 acpi_button0: Power Button on acpi0 acpi_button1: Sleep Button on acpi0 pcib0: ACPI Host-PCI bridge port 0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on acpi0 pci0: ACPI PCI bus on pcib0 pcib0: slot 9 INTA is routed to irq 10 pcib0: slot 10 INTA is routed to irq 12 pcib0: slot 11 INTA is routed to irq 5 agp0: VIA 82C691 (Apollo Pro) host to PCI bridge mem 0xd800-0xdbff at device 0.0 on pci0 pcib1: PCI-PCI bridge at device 1.0 on pci0 pci1: PCI bus on pcib1 pcib0: slot 1 INTA is routed to irq 11 pcib1: slot 0 INTA is routed to irq 11 pci1: display, VGA at device 0.0 (no driver attached) isab0: PCI-ISA bridge at device 7.0 on pci0 isa0: ISA bus on isab0 atapci0: VIA 82C596B UDMA66 controller port 0xd000-0xd00f at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] pci0: bridge, HOST-PCI at device 7.3 (no driver attached) rl0: RealTek 8139 10/100BaseTX port 0xd800-0xd8ff mem 0xe3001000-0xe30010ff irq 10 at device 9.0 on pci0 rl0: Ethernet address: 00:40:33:ab:df:66 miibus0: MII bus on rl0 rlphy0: RealTek internal media interface on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pci0: multimedia, audio at device 10.0 (no driver attached) ahc0: Adaptec 2940 SCSI adapter port 0xe000-0xe0ff mem 0xe300-0xe3000fff irq 5 at device 11.0 on pci0 aic7870: Single Channel A, SCSI Id=7, 16/253 SCBs fdc0: Enhanced floppy controller (i82077, NE72065 or clone) port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: 1440-KB 3.5 drive on fdc0 drive 0 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A ppc0 port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: Parallel port bus on ppc0 plip0: PLIP network interface on ppbus0 lpt0: Printer on ppbus0 lpt0: Interrupt-driven port ppi0: Parallel I/O on ppbus0 atkbdc0: Keyboard controller (i8042) port 0x64,0x60 irq 1 on acpi0 atkbd0: AT Keyboard flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 orm0: Option ROMs at iomem 0xc8000-0xca7ff,0xc-0xc7fff on isa0 pmtimer0 on isa0 sc0: System console at flags 0x100 on isa0 sc0: VGA 16 virtual consoles, flags=0x300 vga0: Generic ISA VGA at port 0x3c0-0x3df iomem 0xa-0xb on isa0 Timecounter TSC frequency 797967629 Hz quality 800 Timecounters tick every
Problem Installing FreeBSD 6.0, asking for help
Hello, may I ask you for help with the following Problem: When I try to install FreeBsd6.0, there is the following error during the boot process (because the system is not able to boot from CD, I have to boot from floppy) occurs: ahc0: probe1:ahc0:0:1:0: SCB 6: immediate reset Flags 0x620 ahc0: probe1:ahc0:0:1:0: No longer in timeout, status=25b ahc0: Issued channel A bus reset, SCBs 6 aborted. ... ... ... There are variants of the messages with different SCB, flags and status. As a result, the install program does not find any disk. FreeBSD5.2 is running and dmesg produces the following output: Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2.1-RELEASE #0: Mon Feb 23 20:45:55 GMT 2004 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel /boot/kernel/kernel at 0xc0a35000. Preloaded elf module /boot/kernel/acpi.ko at 0xc0a351f4. Timecounter i8254 frequency 1193182 Hz quality 0 CPU: Intel Pentium III (797.97-MHz 686-class CPU) Origin = GenuineIntel Id = 0x686 Stepping = 6 Features=0x383f9ffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE real memory = 268369920 (255 MB) avail memory = 251047936 (239 MB) Pentium Pro MTRR support enabled npx0: [FAST] npx0: math processor on motherboard npx0: INT 16 interface acpi0: GBTAWRDACPI on motherboard pcibios: BIOS version 2.10 Using $PIR table, 6 entries at 0xc00fdee0 acpi0: Power Button (fixed) Timecounter ACPI-fast frequency 3579545 Hz quality 1000 acpi_timer0: 24-bit timer at 3.579545MHz port 0x4008-0x400b on acpi0 acpi_cpu0: CPU on acpi0 acpi_button0: Power Button on acpi0 acpi_button1: Sleep Button on acpi0 pcib0: ACPI Host-PCI bridge port 0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on acpi0 pci0: ACPI PCI bus on pcib0 pcib0: slot 9 INTA is routed to irq 10 pcib0: slot 10 INTA is routed to irq 12 pcib0: slot 11 INTA is routed to irq 5 agp0: VIA 82C691 (Apollo Pro) host to PCI bridge mem 0xd800-0xdbff at device 0.0 on pci0 pcib1: PCI-PCI bridge at device 1.0 on pci0 pci1: PCI bus on pcib1 pcib0: slot 1 INTA is routed to irq 11 pcib1: slot 0 INTA is routed to irq 11 pci1: display, VGA at device 0.0 (no driver attached) isab0: PCI-ISA bridge at device 7.0 on pci0 isa0: ISA bus on isab0 atapci0: VIA 82C596B UDMA66 controller port 0xd000-0xd00f at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] pci0: bridge, HOST-PCI at device 7.3 (no driver attached) rl0: RealTek 8139 10/100BaseTX port 0xd800-0xd8ff mem 0xe3001000-0xe30010ff irq 10 at device 9.0 on pci0 rl0: Ethernet address: 00:40:33:ab:df:66 miibus0: MII bus on rl0 rlphy0: RealTek internal media interface on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pci0: multimedia, audio at device 10.0 (no driver attached) ahc0: Adaptec 2940 SCSI adapter port 0xe000-0xe0ff mem 0xe300-0xe3000fff irq 5 at device 11.0 on pci0 aic7870: Single Channel A, SCSI Id=7, 16/253 SCBs fdc0: Enhanced floppy controller (i82077, NE72065 or clone) port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: 1440-KB 3.5 drive on fdc0 drive 0 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A ppc0 port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: Parallel port bus on ppc0 plip0: PLIP network interface on ppbus0 lpt0: Printer on ppbus0 lpt0: Interrupt-driven port ppi0: Parallel I/O on ppbus0 atkbdc0: Keyboard controller (i8042) port 0x64,0x60 irq 1 on acpi0 atkbd0: AT Keyboard flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 orm0: Option ROMs at iomem 0xc8000-0xca7ff,0xc-0xc7fff on isa0 pmtimer0 on isa0 sc0: System console at flags 0x100 on isa0 sc0: VGA 16 virtual consoles, flags=0x300 vga0: Generic ISA VGA at port 0x3c0-0x3df iomem 0xa-0xb on isa0 Timecounter TSC frequency 797967629 Hz quality 800 Timecounters tick every 10.000 msec Waiting 15 seconds for SCSI devices to settle acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0% GEOM: create disk cd0 dp=0xc2d77600 GEOM: create disk cd1 dp=0xc2d77e00 GEOM: create disk da0 dp=0xc2e24050 GEOM: create disk da1 dp=0xc2e26850 GEOM: create disk da2 dp=0xc2e26450 cd0 at ahc0 bus 0 target 4 lun 0 cd0: PLEXTOR CD-ROM PX-32TS 1.02 Removable CD-ROM SCSI-2 device cd0: 10.000MB/s transfers (10.000MHz, offset 15) cd0: cd present [329666 x 2048 byte records] cd1 at ahc0 bus 0 target 5 lun 0 cd1: YAMAHA CRW4416S 1.0f Removable CD-ROM SCSI-2 device cd1: 8.333MB/s transfers (8.333MHz, offset 15) cd1: Attempt to query device size failed: NOT READY, Medium not present - tray closed da2 at ahc0 bus 0 target 2 lun 0 da2: IBM DCAS-34330 S65A Fixed Direct Access SCSI-2 device da2: 10.000MB/s transfers (10.000MHz, offset 15) da2: 4134MB
RE: Problem Installing FreeBSD 6.0, asking for help
I believe you are saying that 5.2 is currently installed on the hard drive and you want to do a fresh install from scratch of 6.0. You have to change the pc bios setup to boot from the cd drive instead of from the hard drive. The pc will then boot from the 6.0 cd and install 6.0 destroying the 5.2 system on the hard drive along with any user data you had. After 6.0 is installed you have to change the bios back to booting from the hard drive. Be sure you have a backup of any user data on the 5.2 system you want saved. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of [EMAIL PROTECTED] Sent: Saturday, March 11, 2006 5:44 PM To: [EMAIL PROTECTED] Subject: Problem Installing FreeBSD 6.0, asking for help Hello, may I ask you for help with the following Problem: When I try to install FreeBsd6.0, there is the following error during the boot process (because the system is not able to boot from CD, I have to boot from floppy) occurs: ahc0: probe1:ahc0:0:1:0: SCB 6: immediate reset Flags 0x620 ahc0: probe1:ahc0:0:1:0: No longer in timeout, status=25b ahc0: Issued channel A bus reset, SCBs 6 aborted. ... ... ... There are variants of the messages with different SCB, flags and status. As a result, the install program does not find any disk. FreeBSD5.2 is running and dmesg produces the following output: Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2.1-RELEASE #0: Mon Feb 23 20:45:55 GMT 2004 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel /boot/kernel/kernel at 0xc0a35000. Preloaded elf module /boot/kernel/acpi.ko at 0xc0a351f4. Timecounter i8254 frequency 1193182 Hz quality 0 CPU: Intel Pentium III (797.97-MHz 686-class CPU) Origin = GenuineIntel Id = 0x686 Stepping = 6 Features=0x383f9ffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,M CA,CMOV,PAT,PSE36,MMX,FXSR,SSE real memory = 268369920 (255 MB) avail memory = 251047936 (239 MB) Pentium Pro MTRR support enabled npx0: [FAST] npx0: math processor on motherboard npx0: INT 16 interface acpi0: GBTAWRDACPI on motherboard pcibios: BIOS version 2.10 Using $PIR table, 6 entries at 0xc00fdee0 acpi0: Power Button (fixed) Timecounter ACPI-fast frequency 3579545 Hz quality 1000 acpi_timer0: 24-bit timer at 3.579545MHz port 0x4008-0x400b on acpi0 acpi_cpu0: CPU on acpi0 acpi_button0: Power Button on acpi0 acpi_button1: Sleep Button on acpi0 pcib0: ACPI Host-PCI bridge port 0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on acpi0 pci0: ACPI PCI bus on pcib0 pcib0: slot 9 INTA is routed to irq 10 pcib0: slot 10 INTA is routed to irq 12 pcib0: slot 11 INTA is routed to irq 5 agp0: VIA 82C691 (Apollo Pro) host to PCI bridge mem 0xd800-0xdbff at device 0.0 on pci0 pcib1: PCI-PCI bridge at device 1.0 on pci0 pci1: PCI bus on pcib1 pcib0: slot 1 INTA is routed to irq 11 pcib1: slot 0 INTA is routed to irq 11 pci1: display, VGA at device 0.0 (no driver attached) isab0: PCI-ISA bridge at device 7.0 on pci0 isa0: ISA bus on isab0 atapci0: VIA 82C596B UDMA66 controller port 0xd000-0xd00f at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] pci0: bridge, HOST-PCI at device 7.3 (no driver attached) rl0: RealTek 8139 10/100BaseTX port 0xd800-0xd8ff mem 0xe3001000-0xe30010ff irq 10 at device 9.0 on pci0 rl0: Ethernet address: 00:40:33:ab:df:66 miibus0: MII bus on rl0 rlphy0: RealTek internal media interface on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pci0: multimedia, audio at device 10.0 (no driver attached) ahc0: Adaptec 2940 SCSI adapter port 0xe000-0xe0ff mem 0xe300-0xe3000fff irq 5 at device 11.0 on pci0 aic7870: Single Channel A, SCSI Id=7, 16/253 SCBs fdc0: Enhanced floppy controller (i82077, NE72065 or clone) port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: 1440-KB 3.5 drive on fdc0 drive 0 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A ppc0 port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: Parallel port bus on ppc0 plip0: PLIP network interface on ppbus0 lpt0: Printer on ppbus0 lpt0: Interrupt-driven port ppi0: Parallel I/O on ppbus0 atkbdc0: Keyboard controller (i8042) port 0x64,0x60 irq 1 on acpi0 atkbd0: AT Keyboard flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 orm0: Option ROMs at iomem 0xc8000-0xca7ff,0xc-0xc7fff on isa0 pmtimer0 on isa0 sc0: System console at flags 0x100 on isa0 sc0: VGA 16 virtual consoles, flags=0x300 vga0: Generic ISA VGA at port 0x3c0-0x3df iomem 0xa-0xb on isa0 Timecounter TSC frequency 797967629 Hz quality 800 Timecounters tick every 10.000 msec Waiting 15 seconds for SCSI devices to settle acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0