Re: Promise TX4302 eSATA card doesn't play with a Quantum DLT-v4 tape drive
On 04/12/10 11:50, Mark wrote: I have the promise controller, I got it to add dvd burners to the system, but it will not work with the dvd drives. The promise site says the card is atapi compliant but it did not work that way for me. I had to move hard drives to the promise and add the dvd burners to the on board esata. YMMV Good grief. Thanks for the information. -- Kirk Strauser ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: Promise TX4302 eSATA card doesn't play with a Quantum DLT-v4 tape drive
On 04/12/10 10:50, Mark wrote: Would you need to load atapicam into the kernel?? That doesn't seem to change things. I'll try again later today by rebooting with atapicam_load="YES" in /boot/loader.conf just for giggles. -- Kirk Strauser ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Promise TX4302 eSATA card doesn't play with a Quantum DLT-v4 tape drive
I have a FreeBSD 8 server with a Quantum DLT-v4 tape drive. I'd been using it over USB but want to switch to eSATA for various reasons. Here's the dmesg entry for the drive when connected via USB: sa0 at umass-sim0 bus 0 scbus0 target 0 lun 0 sa0: Removable Sequential Access SCSI-2 device sa0: 40.000MB/s transfers Here are snippets of dmesg when connecting the drive via the new Promise TX4302 card I just installed: atapci0: port 0xdc80-0xdcff,0xd800-0xd8ff mem 0xdfbff000-0xdfbf,0xdfbc-0xdfbd irq 66 at device 7.0 on pci3 atapci0: [ITHREAD] atapci0: [ITHREAD] ata2: on atapci0 ata3: on atapci0 ata4: on atapci0 ata5: on atapci0 ata3: SIGNATURE: eb140101 ast0: FAILURE - MODE_SENSE timed out ata3: SIGNATURE: eb140101 ast0: FAILURE - MODE_SENSE timed out ata3: SIGNATURE: eb140101 ast0: FAILURE - MODE_SENSE timed out ata3: SIGNATURE: eb140101 ast0: FAILURE - MODE_SENSE timed out ata3: SIGNATURE: eb140101 ast0: FAILURE - MODE_SENSE timed out device_attach: ast0 attach returned 6 ...and then device ast0 never appears. Any idea how I can get these two pieces of hardware to play nicely together? -- Kirk Strauser ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"