Re: Hard Drive going bad? (hard error reading fsbn)
Kevin Greenidge [EMAIL PROTECTED] wrote: I started seeing the error messages in my logs. When I googled the error some seem to think it may be a hardware issue and some seem to think it's o/s specific. Trying to see what's the general opinon. Running 4.9 It's either a failing HDD, or the HDD/controller hardware you're using isn't compatible with FreeBSD. If it's been working for a while without problems, and suddenly started doing this (as you seem to imply) then it's definately failing hardware. If it's been doing this since install, then it'll be just a little harder to debug. If you post dmesg output and hardware details, I'm sure someone who's familiar with that hardware will let you know if this is expected or not. Jun 13 00:30:26 santacruz /kernel: ad0s1h: hard error reading fsbn 197442991 of 26369632-26369887 (ad0s1 bn 197442991; cn 12290 tn 65 sn 46) status=59 error=40 Jun 13 00:30:37 santacruz /kernel: ad0s1h: hard error reading fsbn 197443023 of 26369664-26369887 (ad0s1 bn 197443023; cn 12290 tn 66 sn 15) status=59 error=40 Jun 13 00:30:42 santacruz /kernel: ad0s1h: hard error reading fsbn 197443055 of 26369696-26369887 (ad0s1 bn 197443055; cn 12290 tn 66 sn 47) status=59 error=40 Jun 13 00:30:53 santacruz /kernel: ad0s1h: hard error reading fsbn 197443087 of 26369728-26369887 (ad0s1 bn 197443087; cn 12290 tn 67 sn 16) status=59 error=40 Jun 13 00:30:53 santacruz /kernel: ad0s1h: hard error reading fsbn 197443119 of 26369760-26369887 (ad0s1 bn 197443119; cn 12290 tn 67 sn 48) status=59 error=40 Jun 13 00:30:53 santacruz /kernel: ad0s1h: hard error reading fsbn 197443151 of 26369792-26369887 (ad0s1 bn 197443151; cn 12290 tn 68 sn 17) status=59 error=40 Jun 13 00:30:53 santacruz /kernel: ad0s1h: hard error reading fsbn 197443151 of 26369792-26369823 (ad0s1 bn 197443151; cn 12290 tn 68 sn 17) status=59 error=40 Jun 13 00:30:53 santacruz /kernel: ad0s1h: hard error reading fsbn 197443151 of 26369792-26369823 (ad0s1 bn 197443151; cn 12290 tn 68 sn 17) status=59 error=40 ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] -- Bill Moran Potential Technologies http://www.potentialtech.com ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Hard Drive going bad? (hard error reading fsbn)
Here is the /etc/fstab and my dmesg output: # DeviceMountpoint FStype Options DumpPass# /dev/ad0s1b noneswapsw 0 0 /dev/ad0s1a / ufs rw 1 1 /dev/ad0s1f /home ufs rw,userquota,groupquota 2 2 /dev/ad0s1g /tmpufs rw,noexec,nosuid2 2 /dev/ad0s1e /usrufs rw 2 2 /dev/ad0s1h /varufs rw,userquota,groupquota 2 2 /dev/acd0c /cdrom cd9660 ro,noauto 0 0 proc/proc procfs rw 0 0 - 2.2 irq 5 pcib1: PCI to PCI bridge (vendor=10de device=006c) at device 8.0 on pci0 pci1: PCI bus on pcib1 fxp0: Intel 82559 Pro/100 Ethernet port 0xd000-0xd03f mem 0xe500-0xe50f,0xe511-0xe5110fff irq 11 at device 6.0 on pci1 fxp0: Ethernet address 00:90:27:a9:71:66 inphy0: i82555 10/100 media interface on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pci1: SiS 6326 SVGA controller at 9.0 irq 12 atapci0: Generic PCI ATA controller port 0xf000-0xf00f at device 9.0 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pcib2: PCI to PCI bridge (vendor=10de device=01e8) at device 30.0 on pci0 pci2: PCI bus on pcib2 orm0: Option ROMs at iomem 0xc-0xc7fff,0xc8000-0xcbfff,0xcc000-0xccfff on isa0 pmtimer0 on isa0 fdc0: NEC 72065B or clone at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: 1440-KB 3.5 drive on fdc0 drive 0 atkbdc0: Keyboard controller (i8042) at port 0x60,0x64 on isa0 vga0: Generic ISA VGA at port 0x3c0-0x3df iomem 0xa-0xb on isa0 sc0: System console at flags 0x100 on isa0 sc0: VGA 16 virtual consoles, flags=0x300 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: Parallel port at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode lpt0: Printer on ppbus0 lpt0: Interrupt-driven port ppi0: Parallel I/O on ppbus0 plip0: PLIP network interface on ppbus0 IP Filter: v3.4.31 initialized. Default = pass all, Logging = enabled ata1-slave: ATA identify retries exceeded ad0: 88350MB IC35L090AVV207-0 [179505/16/63] at ata0-master BIOSDMA acd0: CDROM Compaq CRD-8322B at ata1-master PIO4 Mounting root from ufs:/dev/ad0s1a ad0s1h: hard error reading fsbn 197442815 of 26369632-26369887 (ad0s1 bn 197442815; cn 12290 tn 62 sn 59) trying PIO mode ad0: DMA problem fallback to PIO mode ad0: DMA problem fallback to PIO mode ad0: DMA problem fallback to PIO mode ad0: DMA problem fallback to PIO mode ad0: DMA problem fallback to PIO mode ad0: DMA problem fallback to PIO mode ad0: DMA problem fallback to PIO mode ad0: DMA problem fallback to PIO mode ad0: DMA problem fallback to PIO mode ad0: DMA problem fallback to PIO mode ad0: DMA problem fallback to PIO mode ad0s1h: hard error reading fsbn 197442991 of 26369632-26369887 (ad0s1 bn 197442991; cn 12290 tn 65 sn 46) status=59 error=40 ad0s1h: hard error reading fsbn 197443023 of 26369664-26369887 (ad0s1 bn 197443023; cn 12290 tn 66 sn 15) status=59 error=40 ad0s1h: hard error reading fsbn 197443055 of 26369696-26369887 (ad0s1 bn 197443055; cn 12290 tn 66 sn 47) status=59 error=40 ad0s1h: hard error reading fsbn 197443087 of 26369728-26369887 (ad0s1 bn 197443087; cn 12290 tn 67 sn 16) status=59 error=40 ad0s1h: hard error reading fsbn 197443119 of 26369760-26369887 (ad0s1 bn 197443119; cn 12290 tn 67 sn 48) status=59 error=40 ad0s1h: hard error reading fsbn 197443151 of 26369792-26369887 (ad0s1 bn 197443151; cn 12290 tn 68 sn 17) status=59 error=40 ad0s1h: hard error reading fsbn 197443151 of 26369792-26369823 (ad0s1 bn 197443151; cn 12290 tn 68 sn 17) status=59 error=40 ad0s1h: hard error reading fsbn 197443151 of 26369792-26369823 (ad0s1 bn 197443151; cn 12290 tn 68 sn 17) status=59 error=40 ad0s1h: hard error reading fsbn 197443151 of 26369792-26369823 (ad0s1 bn 197443151; cn 12290 tn 68 sn 17) status=59 error=40 ad0s1h: hard error reading fsbn 197443151 of 26369792-26369823 (ad0s1 bn 197443151; cn 12290 tn 68 sn 17) status=59 error=40 ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] -- Bill Moran Potential Technologies http://www.potentialtech.com ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Hard Drive going bad? (hard error reading fsbn)
Kevin Greenidge [EMAIL PROTECTED] wrote: Has it been doing this since you installed? Or was it working before? Looks like a failed HDD from here. Here is the /etc/fstab and my dmesg output: # Device Mountpoint FStype Options DumpPass# /dev/ad0s1b noneswapsw 0 0 /dev/ad0s1a / ufs rw 1 1 /dev/ad0s1f /home ufs rw,userquota,groupquota 2 2 /dev/ad0s1g /tmpufs rw,noexec,nosuid2 2 /dev/ad0s1e /usrufs rw 2 2 /dev/ad0s1h /varufs rw,userquota,groupquota 2 2 /dev/acd0c/cdrom cd9660 ro,noauto 0 0 proc /proc procfs rw 0 0 - 2.2 irq 5 pcib1: PCI to PCI bridge (vendor=10de device=006c) at device 8.0 on pci0 pci1: PCI bus on pcib1 fxp0: Intel 82559 Pro/100 Ethernet port 0xd000-0xd03f mem 0xe500-0xe50f,0xe511-0xe5110fff irq 11 at device 6.0 on pci1 fxp0: Ethernet address 00:90:27:a9:71:66 inphy0: i82555 10/100 media interface on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pci1: SiS 6326 SVGA controller at 9.0 irq 12 atapci0: Generic PCI ATA controller port 0xf000-0xf00f at device 9.0 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pcib2: PCI to PCI bridge (vendor=10de device=01e8) at device 30.0 on pci0 pci2: PCI bus on pcib2 orm0: Option ROMs at iomem 0xc-0xc7fff,0xc8000-0xcbfff,0xcc000-0xccfff on isa0 pmtimer0 on isa0 fdc0: NEC 72065B or clone at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: 1440-KB 3.5 drive on fdc0 drive 0 atkbdc0: Keyboard controller (i8042) at port 0x60,0x64 on isa0 vga0: Generic ISA VGA at port 0x3c0-0x3df iomem 0xa-0xb on isa0 sc0: System console at flags 0x100 on isa0 sc0: VGA 16 virtual consoles, flags=0x300 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: Parallel port at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode lpt0: Printer on ppbus0 lpt0: Interrupt-driven port ppi0: Parallel I/O on ppbus0 plip0: PLIP network interface on ppbus0 IP Filter: v3.4.31 initialized. Default = pass all, Logging = enabled ata1-slave: ATA identify retries exceeded ad0: 88350MB IC35L090AVV207-0 [179505/16/63] at ata0-master BIOSDMA acd0: CDROM Compaq CRD-8322B at ata1-master PIO4 Mounting root from ufs:/dev/ad0s1a ad0s1h: hard error reading fsbn 197442815 of 26369632-26369887 (ad0s1 bn 197442815; cn 12290 tn 62 sn 59) trying PIO mode ad0: DMA problem fallback to PIO mode ad0: DMA problem fallback to PIO mode ad0: DMA problem fallback to PIO mode ad0: DMA problem fallback to PIO mode ad0: DMA problem fallback to PIO mode ad0: DMA problem fallback to PIO mode ad0: DMA problem fallback to PIO mode ad0: DMA problem fallback to PIO mode ad0: DMA problem fallback to PIO mode ad0: DMA problem fallback to PIO mode ad0: DMA problem fallback to PIO mode ad0s1h: hard error reading fsbn 197442991 of 26369632-26369887 (ad0s1 bn 197442991; cn 12290 tn 65 sn 46) status=59 error=40 ad0s1h: hard error reading fsbn 197443023 of 26369664-26369887 (ad0s1 bn 197443023; cn 12290 tn 66 sn 15) status=59 error=40 ad0s1h: hard error reading fsbn 197443055 of 26369696-26369887 (ad0s1 bn 197443055; cn 12290 tn 66 sn 47) status=59 error=40 ad0s1h: hard error reading fsbn 197443087 of 26369728-26369887 (ad0s1 bn 197443087; cn 12290 tn 67 sn 16) status=59 error=40 ad0s1h: hard error reading fsbn 197443119 of 26369760-26369887 (ad0s1 bn 197443119; cn 12290 tn 67 sn 48) status=59 error=40 ad0s1h: hard error reading fsbn 197443151 of 26369792-26369887 (ad0s1 bn 197443151; cn 12290 tn 68 sn 17) status=59 error=40 ad0s1h: hard error reading fsbn 197443151 of 26369792-26369823 (ad0s1 bn 197443151; cn 12290 tn 68 sn 17) status=59 error=40 ad0s1h: hard error reading fsbn 197443151 of 26369792-26369823 (ad0s1 bn 197443151; cn 12290 tn 68 sn 17) status=59 error=40 ad0s1h: hard error reading fsbn 197443151 of 26369792-26369823 (ad0s1 bn 197443151; cn 12290 tn 68 sn 17) status=59 error=40 ad0s1h: hard error reading fsbn 197443151 of 26369792-26369823 (ad0s1 bn 197443151; cn 12290 tn 68 sn 17) status=59 error=40 -- Bill Moran Potential Technologies http://www.potentialtech.com ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
RE: Hard Drive going bad? (hard error reading fsbn)
The drive is only about 4 months old and freebsd 4.9 has been installed for about 3 1/2 months running flawlessly. I have a spare drive but I sure hate transferring all that data over to the new drive. I took a chance and installed a single drive since I've always had good luck with drives, now it looks like I'll have to invest in that 3ware raid card after all. Thanks, Kevin -Original Message- From: Bill Moran [mailto:[EMAIL PROTECTED] Sent: Monday, June 14, 2004 11:35 AM To: [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Subject: Re: Hard Drive going bad? (hard error reading fsbn) Kevin Greenidge [EMAIL PROTECTED] wrote: Has it been doing this since you installed? Or was it working before? Looks like a failed HDD from here. Here is the /etc/fstab and my dmesg output: # Device Mountpoint FStype Options Dump Pass# /dev/ad0s1b noneswapsw 0 0 /dev/ad0s1a / ufs rw 1 1 /dev/ad0s1f /home ufs rw,userquota,groupquota 2 2 /dev/ad0s1g /tmpufs rw,noexec,nosuid 2 2 /dev/ad0s1e /usrufs rw 2 2 /dev/ad0s1h /varufs rw,userquota,groupquota 2 2 /dev/acd0c/cdrom cd9660 ro,noauto 0 0 proc /proc procfs rw 0 0 - 2.2 irq 5 pcib1: PCI to PCI bridge (vendor=10de device=006c) at device 8.0 on pci0 pci1: PCI bus on pcib1 fxp0: Intel 82559 Pro/100 Ethernet port 0xd000-0xd03f mem 0xe500-0xe50f,0xe511-0xe5110fff irq 11 at device 6.0 on pci1 fxp0: Ethernet address 00:90:27:a9:71:66 inphy0: i82555 10/100 media interface on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pci1: SiS 6326 SVGA controller at 9.0 irq 12 atapci0: Generic PCI ATA controller port 0xf000-0xf00f at device 9.0 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pcib2: PCI to PCI bridge (vendor=10de device=01e8) at device 30.0 on pci0 pci2: PCI bus on pcib2 orm0: Option ROMs at iomem 0xc-0xc7fff,0xc8000-0xcbfff,0xcc000-0xccfff on isa0 pmtimer0 on isa0 fdc0: NEC 72065B or clone at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: 1440-KB 3.5 drive on fdc0 drive 0 atkbdc0: Keyboard controller (i8042) at port 0x60,0x64 on isa0 vga0: Generic ISA VGA at port 0x3c0-0x3df iomem 0xa-0xb on isa0 sc0: System console at flags 0x100 on isa0 sc0: VGA 16 virtual consoles, flags=0x300 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: Parallel port at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode lpt0: Printer on ppbus0 lpt0: Interrupt-driven port ppi0: Parallel I/O on ppbus0 plip0: PLIP network interface on ppbus0 IP Filter: v3.4.31 initialized. Default = pass all, Logging = enabled ata1-slave: ATA identify retries exceeded ad0: 88350MB IC35L090AVV207-0 [179505/16/63] at ata0-master BIOSDMA acd0: CDROM Compaq CRD-8322B at ata1-master PIO4 Mounting root from ufs:/dev/ad0s1a ad0s1h: hard error reading fsbn 197442815 of 26369632-26369887 (ad0s1 bn 197442815; cn 12290 tn 62 sn 59) trying PIO mode ad0: DMA problem fallback to PIO mode ad0: DMA problem fallback to PIO mode ad0: DMA problem fallback to PIO mode ad0: DMA problem fallback to PIO mode ad0: DMA problem fallback to PIO mode ad0: DMA problem fallback to PIO mode ad0: DMA problem fallback to PIO mode ad0: DMA problem fallback to PIO mode ad0: DMA problem fallback to PIO mode ad0: DMA problem fallback to PIO mode ad0: DMA problem fallback to PIO mode ad0s1h: hard error reading fsbn 197442991 of 26369632-26369887 (ad0s1 bn 197442991; cn 12290 tn 65 sn 46) status=59 error=40 ad0s1h: hard error reading fsbn 197443023 of 26369664-26369887 (ad0s1 bn 197443023; cn 12290 tn 66 sn 15) status=59 error=40 ad0s1h: hard error reading fsbn 197443055 of 26369696-26369887 (ad0s1 bn 197443055; cn 12290 tn 66 sn 47) status=59 error=40 ad0s1h: hard error reading fsbn 197443087 of 26369728-26369887 (ad0s1 bn 197443087; cn 12290 tn 67 sn 16) status=59 error=40 ad0s1h: hard error reading fsbn 197443119 of 26369760-26369887 (ad0s1 bn 197443119; cn 12290 tn 67 sn 48) status=59 error=40 ad0s1h: hard error reading fsbn 197443151 of 26369792-26369887 (ad0s1 bn 197443151; cn 12290 tn 68 sn 17) status=59 error=40 ad0s1h: hard error reading fsbn 197443151 of 26369792-26369823 (ad0s1 bn 197443151; cn 12290 tn 68 sn 17) status=59 error=40 ad0s1h: hard error reading fsbn 197443151 of 26369792-26369823 (ad0s1 bn 197443151; cn 12290 tn 68 sn 17) status=59 error=40 ad0s1h: hard error reading fsbn 197443151 of 26369792-26369823 (ad0s1 bn 197443151; cn 12290 tn 68 sn 17) status=59 error=40
