-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
Steve Bertrand
Sent: Wednesday, October 05, 2005 7:45 AM
To: freebsd-questions@freebsd.org
Subject: Sata drives and FBSD
Hi all,
I have had an issue (as many others have) trying to get
STABLE, or even CURRENT running on a box with an ICH6R RAID
controller.
After install (which appears to be successful), when I reboot it just
sits there with a blinking cursor in the top left of the screen.
I've tried this numerous times over the past couple months to no
avail.
Today, I tried another box using a 200GB Sata drive w/o RAID, and the
exact same thing happens.
I've tried all manner of things to no avail. If someone can shed some
light on this issue, I would most appreciate it.
Tks,
Steve
ICH6R isn't supported under 5.4, at least with hardware RAID. You could
try the newest 6.0 stable. See man ata.
On the other hand, I seem to recall getting ICH6R to run without RAID
under 5.4. You might want to publish a dmesg.
Regards,
-gayn
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]