Re: No xvideo support for ATI Rage Pro?
Hi, Is there any driver that provides xvideo support for ATI Rage Pro / 128? I cannot get fullscreen support with mplayer. You you try the gatos drivers: http://gatos.sf.net The driver binaries for linux will work on FreeBSD, too. It is also possible to compile them yourself, but you will need the XFree sources for that. Btw. There are also DRI-enabled versions of that driver, but AFAIK the kernel modules have not been ported to FreeBSD yet. HTH, Simon pgp0.pgp Description: PGP signature
Re: No xvideo support for ATI Rage Pro?
On Thu, 20 Mar 2003 09:34:39 +0100 Heinrich Rebehn [EMAIL PROTECTED] wrote: Hi, Is there any driver that provides xvideo support for ATI Rage Pro / 128? It works for me: [earth] /home/paul: dmesg | grep ATI pci1: ATI model 5046 graphics accelerator at 0.0 irq 11 drm0: ATI Rage 128 Pro PF (AGP) port 0xd800-0xd8ff mem 0xdb00-0xdb003fff,0xdc00-0xdfff irq 11 at device 0.0 on pci1 [earth] /home/paul: xvinfo X-Video Extension version 2.2 screen #0 Adaptor #0: ATI Rage128 Video Overlay number of ports: 1 port base: 61 [snip] From /etc/X11/XF86Config: Section Device Identifier ATI Rage 128 Driver ati VendorName ATI BoardName Rage 128 Pro PF BusID PCI:1:0:0 #VideoRam32768 # Insert Clocks lines here if appropriate Option Display BIOS Option AGPMode 4 EndSection MPlayer command line: mplayer -vo x11 -stop_xscreensaver -zoom filename [earth] /home/paul: uname -a FreeBSD earth.upton.net 4.7-STABLE FreeBSD 4.7-STABLE #2: Sun Mar 16 11:02:18 EST 2003 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/EARTH i386 Hope that helps. -- Cogeco ergo sum pgp0.pgp Description: PGP signature
Re: No xvideo support for ATI Rage Pro?
On Thu, Mar 20, 2003 at 06:35:22AM -0500, Paul Murphy wrote: MPlayer command line: mplayer -vo x11 -stop_xscreensaver -zoom filename But now you're not using xv according to 'mplayer -vo help': Available video output drivers: xv X11/Xv x11 X11 ( XImage/Shm ) Does mplayer -vo xv work? --Stijn (without an ATI but just trying to make sure I understand -vo right) -- Nostalgia ain't what it used to be. pgp0.pgp Description: PGP signature
Re: No xvideo support for ATI Rage Pro?
On Thu, 20 Mar 2003 12:53:16 +0100 Stijn Hoop [EMAIL PROTECTED] wrote: On Thu, Mar 20, 2003 at 06:35:22AM -0500, Paul Murphy wrote: MPlayer command line: mplayer -vo x11 -stop_xscreensaver -zoom filename But now you're not using xv according to 'mplayer -vo help': Available video output drivers: xv X11/Xv x11 X11 ( XImage/Shm ) Does mplayer -vo xv work? --Stijn (without an ATI but just trying to make sure I understand -vo right) Oops, you are correct. However 'mplayer -vo xv -stop_xscreensaver -zoom filename' still does fullscreen. -- Cogeco ergo sum pgp0.pgp Description: PGP signature
Re: No xvideo support for ATI Rage Pro?
On Thu, Mar 20, 2003 at 06:35:22AM -0500, Paul Murphy wrote: On Thu, 20 Mar 2003 09:34:39 +0100 Heinrich Rebehn [EMAIL PROTECTED] wrote: Hi, Is there any driver that provides xvideo support for ATI Rage Pro / 128? It works for me: [earth] /home/paul: dmesg | grep ATI pci1: ATI model 5046 graphics accelerator at 0.0 irq 11 drm0: ATI Rage 128 Pro PF (AGP) port 0xd800-0xd8ff mem 0xdb00-0xdb003fff,0xdc00-0xdfff irq 11 at device 0.0 on pci1 Isn't the Rago Pro a different card than the Rage 128 Pro? Kris pgp0.pgp Description: PGP signature
Re: No xvideo support for ATI Rage Pro?
On Thursday 20 March 2003 09:34, Heinrich Rebehn wrote: Hi, Is there any driver that provides xvideo support for ATI Rage Pro / 128? I cannot get fullscreen support with mplayer. There is no xv-support for RagePro adapters in XFree86 4.3.0. You will need to use the drivers from GATOS [ http://gatos.sourceforge.net ]. Installation of those is pretty simple, you will just need to download an archive with binaries, extract it in /usr/X11R6 and restart X (it doesn't matter that the binaries were built on Linux). Xv support for Rage128 adapters is present in the drivers shipped with XFree86 4.3.0. -- Regards, Michael Nottebrock pgp0.pgp Description: signature
Re: No xvideo support for ATI Rage Pro?
Kris Kennaway wrote: On Thu, Mar 20, 2003 at 06:35:22AM -0500, Paul Murphy wrote: On Thu, 20 Mar 2003 09:34:39 +0100 Heinrich Rebehn [EMAIL PROTECTED] wrote: Hi, Is there any driver that provides xvideo support for ATI Rage Pro / 128? It works for me: [earth] /home/paul: dmesg | grep ATI pci1: ATI model 5046 graphics accelerator at 0.0 irq 11 drm0: ATI Rage 128 Pro PF (AGP) port 0xd800-0xd8ff mem 0xdb00-0xdb003fff,0xdc00-0xdfff irq 11 at device 0.0 on pci1 Isn't the Rago Pro a different card than the Rage 128 Pro? Sometimes, sometimes not ... They are so cheap, sometimes I get the feeling they put on it whatever they get into their fingers :( If you want to become completely confused, read the page how to get which driver you need (a kind of compatibility page). Kris Jens To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body of the message
Re: No xvideo support for ATI Rage Pro?
On Thursday 20 March 2003 13:47, Jens Rehsack wrote: Kris Kennaway wrote: Isn't the Rago Pro a different card than the Rage 128 Pro? Sometimes, sometimes not ... Definitely different, and not just sometimes. :) The RagePro chipset is much older than the Rage 128 Pro. -- Regards, Michael Nottebrock pgp0.pgp Description: signature
Re: No xvideo support for ATI Rage Pro?
According to Paul Murphy: mplayer -vo x11 -stop_xscreensaver -zoom filename For a full screen on ati I prefere mplayer -vo dga -stop_xscreensaver -zoom file.avi ^^^ Cordialement To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body of the message
Re: No xvideo support for ATI Rage Pro?
On Thu, 20 Mar 2003 14:58:54 +0100 Charlie Root [EMAIL PROTECTED] wrote: According to Paul Murphy: mplayer -vo x11 -stop_xscreensaver -zoom filename For a full screen on ati I prefere mplayer -vo dga -stop_xscreensaver -zoom file.avi ^^^ That doesn't work for me. According to the mplayer FAQ you need... (II) Loading extension XFree86-DGA ...but my XFree86.0.log doesn't show that. Also dga must be run as root. -- Cogeco ergo sum pgp0.pgp Description: PGP signature
Re: No xvideo support for ATI Rage Pro?
On Thursday 20 March 2003 15:51, Paul Murphy wrote: On Thu, 20 Mar 2003 14:58:54 +0100 Charlie Root [EMAIL PROTECTED] wrote: According to Paul Murphy: mplayer -vo x11 -stop_xscreensaver -zoom filename For a full screen on ati I prefere mplayer -vo dga -stop_xscreensaver -zoom file.avi ^^^ That doesn't work for me. According to the mplayer FAQ you need... (II) Loading extension XFree86-DGA ...but my XFree86.0.log doesn't show that. You need to have Load extmod in your 'Section Module' in XF86Config, and make sure you have NOT SubSection extmod Option omit XFree86-DGA EndSubSection somewhere in there, too. Also dga must be run as root. Or change permissions for /dev/mem. -- Regards, Michael Nottebrock pgp0.pgp Description: signature
Re: No xvideo support for ATI Rage Pro?
Michael Nottebrock wrote: On Thursday 20 March 2003 13:47, Jens Rehsack wrote: Kris Kennaway wrote: Isn't the Rago Pro a different card than the Rage 128 Pro? Sometimes, sometimes not ... Definitely different, and not just sometimes. :) The RagePro chipset is much older than the Rage 128 Pro. Sorry, the site at ati.com is gone where the several chips are described, but in past sometimes I had to identify the cards by chip and a number on it. There are some Rage PRO and Rage 128 Pro which were the same and there were differences between several Rage PRO's and Rage 128 PRO's and Rage 3D PRO's. It was very difficult to see, because it depends on the time they were built. The first Rage PRO and the first Rage 128 PRO are different, yes, but some of them had the same features ... I don't want to tell they are indentical, they aren't. Neither all Rage PRO based cards are. Sorry that I cannot point you the page ... Jens To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body of the message
Re: No xvideo support for ATI Rage Pro?
On Thu, Mar 20, 2003 at 02:58:54PM +0100, Charlie Root wrote: According to Paul Murphy: mplayer -vo x11 -stop_xscreensaver -zoom filename For a full screen on ati I prefere mplayer -vo dga -stop_xscreensaver -zoom file.avi ^^^ You might also like to try: mplayer -vo xvidix -zoom -fs (etc.) This also requires root privs, like DGA (curses!). Unlike DGA, you can't fix it with SGID perms on mplayer and /dev/mem (which implies that GtK GUI mode won't work, as this stops running if the EUID is 0) Xvidix seems to needs to open the video device as root, and there are only a limited number of built-in graphics devices (happily from my POV, Mach64 is one of them). However, I find that '-vo xv' is inferior to both '-vo dga' and '-vo xvidix' in respect of color (more noticable on some videos than others). It tends to win for smoothness of playback, but I find that I generally get best results with 'xvidix' these days (which directly supports my ATI Rage Mobility M1, laptop with PIII-600). If you've got more CPU horsepower, you may prefer other solutions. Cheers, AS To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body of the message
Re: No xvideo support for ATI Rage Pro?
If you have SDL, you may like to try.. # mplayer -vo sdl -ao sdl ... You can the use f to switch to and from full screen and c to cycle through video modes. If you want to use SDL and DGA, you can use.. # mplayer -vo sdl:dga -ao sdl ... -Andrew- -- ___ | -Andrew J. Caines- Unix Systems Engineer [EMAIL PROTECTED] | | They that can give up essential liberty to obtain a little temporary | | safety deserve neither liberty nor safety - Benjamin Franklin, 1759 | To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body of the message
Re: No xvideo support for ATI Rage Pro?
* Heinrich Rebehn ([EMAIL PROTECTED]) wrote: == Hi, == == Is there any driver that provides xvideo support for ATI Rage Pro / 128? == I cannot get fullscreen support with mplayer. == == xvinfo outputs: == == X-Video Extension version 2.2 == screen #0 == no adaptors present == == I use XFree86-Server-4.3.0_2. Are there maybe Xfree86-3.x servers available? == == Thanks for any help == == Heinrich == -- I know you're using 4.3.0, but you might check out http://xfree86.org/4.2.0/ati.html -- Joshua To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body of the message
Re: No xvideo support for ATI Rage Pro?
On Thu, 20 Mar 2003 18:19:35 +0100 Michael Nottebrock [EMAIL PROTECTED] wrote: On Thursday 20 March 2003 15:51, Paul Murphy wrote: On Thu, 20 Mar 2003 14:58:54 +0100 Charlie Root [EMAIL PROTECTED] wrote: According to Paul Murphy: mplayer -vo x11 -stop_xscreensaver -zoom filename For a full screen on ati I prefere mplayer -vo dga -stop_xscreensaver -zoom file.avi ^^^ That doesn't work for me. According to the mplayer FAQ you need... (II) Loading extension XFree86-DGA ...but my XFree86.0.log doesn't show that. You need to have Load extmod in your 'Section Module' in XF86Config, and make sure you have NOT SubSection extmod Option omit XFree86-DGA EndSubSection somewhere in there, too. Doh! Also dga must be run as root. Or change permissions for /dev/mem. Just read permission, right? -- Cogeco ergo sum pgp0.pgp Description: PGP signature
Re: No xvideo support for ATI Rage Pro?
On Thu, 20 Mar 2003 19:00:53 + Andrew Sparrow [EMAIL PROTECTED] wrote: On Thu, Mar 20, 2003 at 02:58:54PM +0100, Charlie Root wrote: According to Paul Murphy: mplayer -vo x11 -stop_xscreensaver -zoom filename For a full screen on ati I prefere mplayer -vo dga -stop_xscreensaver -zoom file.avi ^^^ You might also like to try: mplayer -vo xvidix -zoom -fs (etc.) This also requires root privs, like DGA (curses!). Unlike DGA, you can't fix it with SGID perms on mplayer and /dev/mem (which implies that GtK GUI mode won't work, as this stops running if the EUID is 0) Xvidix seems to needs to open the video device as root, and there are only a limited number of built-in graphics devices (happily from my POV, Mach64 is one of them). rage128 too! To OP (I forget who that was), all these methods work fullscreen for me. The best description of my card is: [earth] /home/paul: scanpci [snip] pci bus 0x0001 cardnum 0x00 function 0x00: vendor 0x1002 device 0x5046 ATI Technologies Inc Rage 128 PF/PRO AGP 4x TMDS If it is not just a mis-configuration on your part then I guess there is a (major) difference between the Rage PRO and the Rage 128 PRO. (Where I bought the computer from, they called it Rage Fury PRO) -- Cogeco ergo sum pgp0.pgp Description: PGP signature
Re: No xvideo support for ATI Rage Pro?
On Friday 21 March 2003 00:34, Paul Murphy wrote: Also dga must be run as root. Or change permissions for /dev/mem. Just read permission, right? No, write permission, too. There's a reason why DGA hasn't been such a successful extension... -- Regards, Michael Nottebrock pgp0.pgp Description: signature