Re: PRISM3(PCMCIA) and/or wi(4) driver unable to do WPA?
The driver sadly, see http://www.freebsd.org/projects/ideas/#p-wi Its possible someones working on it but not that i know of. Thanks for the info. -- Regards, Doug ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: PRISM3(PCMCIA) and/or wi(4) driver unable to do WPA?
Doug Poland wrote: > Hello, > > I just acquired a Linksys "Instant Wireless Network PC Card" 802.11b > wireless NIC. When plugged into a 6.2 i386 laptop, dmesg reports: > > wi0: at port > 0x100-0x13f irq 11 function 0 config 1 on pccard1 > wi0: using RF:PRISM3(PCMCIA) > wi0: Intersil Firmware: Primary (1.1.0), Station (1.4.2) > wi0: Ethernet address: 00:06:25:18:6e:1d > > When I attempted to connect to my WPA-PSK WAP, wpa_supplicant(8) just > hangs. When I turned off encryption on the WAP, and enter: > > # dhclient wi0 > > Then the NIC connects just fine. So the question is, is it the NIC, the > wi(4) driver, or what? > > The driver sadly, see http://www.freebsd.org/projects/ideas/#p-wi Its possible someones working on it but not that i know of. Vince ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: PRISM3(PCMCIA) and/or wi(4) driver unable to do WPA?
Doug Poland wrote: On Wed, March 7, 2007 17:57, Patrick Bowen wrote: Doug Poland wrote: Hello, I have just acquired a Linksys "Instant Wireless Network PC Card" 802.11b wireless NIC. When plugged into a 6.2 i386 laptop, dmesg reports: wi0: at port 0x100-0x13f irq 11 function 0 config 1 on pccard1 wi0: using RF:PRISM3(PCMCIA) wi0: Intersil Firmware: Primary (1.1.0), Station (1.4.2) wi0: Ethernet address: 00:06:25:18:6e:1d When I attempted to connect to my WPA-PSK WAP, wpa_supplicant(8) just hangs. When I turned off encryption on the WAP, and enter: # dhclient wi0 Then the NIC connects just fine. So the question is, is the NIC or the wi(4) driver incapable of WPA encryption? Try adding; ifconfig_wi0="DHCP" to /etc/rc.conf. That way it will run dhclient automatically whenever you plug the card in. I don't have a problem running dhclient, I have a problem with WPA. Initially, my rc.conf said: ifconfig_wi0="WPA DHCP" and I had the correct entry in my /etc/wpa_supplicant.conf. I could not connect to my WAP until I turned off WPA, as I stated in my OP. Doug: Sorry, I misunderstood. Please excuse the noise... Patrick ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: PRISM3(PCMCIA) and/or wi(4) driver unable to do WPA?
On Wed, March 7, 2007 17:57, Patrick Bowen wrote: > Doug Poland wrote: >> Hello, >> >> I have just acquired a Linksys "Instant Wireless Network PC Card" >> 802.11b wireless NIC. When plugged into a 6.2 i386 laptop, dmesg >> reports: >> >> wi0: at >> port 0x100-0x13f irq 11 function 0 config 1 on pccard1 >> wi0: using RF:PRISM3(PCMCIA) >> wi0: Intersil Firmware: Primary (1.1.0), Station (1.4.2) >> wi0: Ethernet address: 00:06:25:18:6e:1d >> >> When I attempted to connect to my WPA-PSK WAP, wpa_supplicant(8) >> just hangs. When I turned off encryption on the WAP, and enter: >> >> # dhclient wi0 >> >> Then the NIC connects just fine. So the question is, is the NIC or >> the wi(4) driver incapable of WPA encryption? >> > > Try adding; > > ifconfig_wi0="DHCP" > > to /etc/rc.conf. > > That way it will run dhclient automatically whenever you plug the card > in. > I don't have a problem running dhclient, I have a problem with WPA. Initially, my rc.conf said: ifconfig_wi0="WPA DHCP" and I had the correct entry in my /etc/wpa_supplicant.conf. I could not connect to my WAP until I turned off WPA, as I stated in my OP. -- Regards, Doug ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: PRISM3(PCMCIA) and/or wi(4) driver unable to do WPA?
Doug Poland wrote: Hello, I have just acquired a Linksys "Instant Wireless Network PC Card" 802.11b wireless NIC. When plugged into a 6.2 i386 laptop, dmesg reports: wi0: at port 0x100-0x13f irq 11 function 0 config 1 on pccard1 wi0: using RF:PRISM3(PCMCIA) wi0: Intersil Firmware: Primary (1.1.0), Station (1.4.2) wi0: Ethernet address: 00:06:25:18:6e:1d When I attempted to connect to my WPA-PSK WAP, wpa_supplicant(8) just hangs. When I turned off encryption on the WAP, and enter: # dhclient wi0 Then the NIC connects just fine. So the question is, is the NIC or the wi(4) driver incapable of WPA encryption? Thanks for the help. Try adding; ifconfig_wi0="DHCP" to /etc/rc.conf. That way it will run dhclient automatically whenever you plug the card in. Patrick ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"