are you getting the error on both gigabit cards?
i know there is known interupt issues with this SMP setup, and someone i
know who was complaining had bge's. he ended up rolling back to fxp, but
this was in the 4.x days.
do a vmstat -i and see if they are listed with their specific irqs
-Ben
DeadMan Xia wrote:
Is there no one else, who can help me out, from this bge0: WatchDog
Time Out -- resetting .
I m using FreeBSD 5.3, on Dell Power Edge 6650 Quad Processor Machine,
my system get stuck while i m accessing it through ssh. well after
some time , when i acces the machine check , /var/log/messages ,, i
get bge1: WatchDog Timedout -- resetting error. Is there any one , to
tap my back get me off from this headhac,,,
Here is the dmesg for my system ,
ACPI APIC Table: DELL PE6650
Timecounter i8254 frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) MP CPU 2.20GHz (2192.90-MHz 686-class CPU)
Origin = GenuineIntel Id = 0xf26 Stepping = 6
Features=0xbfebfbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,C
MOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE
Hyperthreading: 2 logical CPUs
real memory = 2147352576 (2047 MB)
avail memory = 2095886336 (1998 MB)
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
cpu4 (AP): APIC ID: 4
cpu5 (AP): APIC ID: 5
cpu6 (AP): APIC ID: 6
cpu7 (AP): APIC ID: 7
ioapic0: Changing APIC ID to 8
ioapic1: Changing APIC ID to 9
ioapic2: Changing APIC ID to 10
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 Version 1.1 irqs 0-15 on motherboard
ioapic1 Version 1.1 irqs 16-31 on motherboard
ioapic2 Version 1.1 irqs 32-47 on motherboard
npx0: [FAST]
npx0: math processor on motherboard
npx0: INT 16 interface
acpi0: DELL PE6650 on motherboard
acpi0: Power Button (fixed)
Timecounter ACPI-safe frequency 3579545 Hz quality 1000
acpi_timer0: 32-bit timer at 3.579545MHz port 0x808-0x80b on acpi0
cpu0: ACPI CPU on acpi0
cpu1: ACPI CPU on acpi0
cpu2: ACPI CPU on acpi0
cpu3: ACPI CPU on acpi0
cpu4: ACPI CPU on acpi0
cpu5: ACPI CPU on acpi0
cpu6: ACPI CPU on acpi0
cpu7: ACPI CPU on acpi0
pcib0: ACPI Host-PCI bridge port 0xcf8-0xcff on acpi0
pci0: ACPI PCI bus on pcib0
ahc0: Adaptec aic7892 Ultra160 SCSI adapter port 0xec00-0xecff mem
0xfe102000-
0xfe102fff irq 16 at device 3.0 on pci0
ahc0: [GIANT-LOCKED]
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
pci0: display, VGA at device 4.0 (no driver attached)
atapci0: ServerWorks CSB5 UDMA100 controller port
0x8b0-0x8bf,0x376,0x170-0x17
7,0x3f6,0x1f0-0x1f7 at device 15.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
ohci0: OHCI (generic) USB controller mem 0xfe10-0xfe100fff irq
10 at devic
e 15.2 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: OHCI (generic) USB controller on ohci0
usb0: USB revision 1.0
uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
isab0: PCI-ISA bridge at device 15.3 on pci0
isa0: ISA bus on isab0
pcib1: ACPI Host-PCI bridge on acpi0
pci3: ACPI PCI bus on pcib1
amr0: LSILogic MegaRAID mem 0xfce0-0xfce0 irq 21 at device
1.0 on pci3
amr0: [GIANT-LOCKED]
amr0: LSILogic PERC 4/DC Firmware 350O, BIOS 1.09, 128MB RAM
pcib2: ACPI Host-PCI bridge on acpi0
pci8: ACPI PCI bus on pcib2
bge0: Broadcom BCM5700 Gigabit Ethernet, ASIC rev. 0x7104 mem
0xfcd1-0xfcd
1 irq 17 at device 1.0 on pci8
miibus0: MII bus on bge0
brgphy0: BCM5411 10/100/1000baseTX PHY on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX
-FDX, auto
bge0: Ethernet address: 00:11:43:db:68:2a
bge1: Broadcom BCM5700 Gigabit Ethernet, ASIC rev. 0x7104 mem
0xfcd0-0xfcd
0 irq 18 at device 2.0 on pci8
miibus1: MII bus on bge1
brgphy1: BCM5411 10/100/1000baseTX PHY on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX
-FDX, auto
bge1: Ethernet address: 00:11:43:db:68:2b
pcib3: ACPI Host-PCI bridge on acpi0
pci9: ACPI PCI bus on pcib3
pcib4: ACPI Host-PCI bridge on acpi0
pci14: ACPI PCI bus on pcib4
pcib5: ACPI Host-PCI bridge on acpi0
pci19: ACPI PCI bus on pcib5
pcib6: ACPI Host-PCI bridge on acpi0
pci24: ACPI PCI bus on pcib6
fdc0: floppy drive controller port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on
acpi0
fdc0: [FAST]
fd0: 1440-KB 3.5 drive on fdc0 drive 0
atkbdc0: Keyboard controller (i8042) port 0x64,0x60 irq 1 on acpi0
atkbd0: AT Keyboard irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sio0: 16550A-compatible COM port port 0x3f8-0x3ff irq 4 flags 0x10
on acpi0
sio0: type 16550A
orm0: ISA Option ROMs at iomem 0xec000-0xe,0xc-0xc7fff on isa0
pmtimer0 on isa0
ppc0: parallel port not found.
sc0: System console at flags 0x100 on isa0
sc0: VGA 16 virtual consoles, flags=0x300
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1:
