Re: Release 9.1 and 3G usb Modem
Well, after trying so many things with no luck, i will give a try on ubuntu. I must say all the support that give to me Odhiambo was excellent. Thanks to all of you, thanks Odhiambo for all your effort. Lets see what happen. Saludos / Regards Leonardo Santagostini http://ar.linkedin.com/in/santagostini 2013/3/27 Matthias Apitz g...@unixarea.de El día Wednesday, March 27, 2013 a las 05:09:22PM -0300, Leonardo Santagostini escribió: Hello Odhiambo . The 3G model is Huawei E173 with Movistar Argentina. Ive tried but i cant see in windows de USB port to have a serial link :( Saludos / Regards Leonardo Santagostini Hi, Pls check if this E173 card is supported by the /sys/dev/usb/serial/u3g.c driver; figure out the vendorID and productID of this card and check if it is in the driver to attach to; I own an E220 and an E1750 Huawei card, both are just working fine without any tricks. matthias -- Sent from my FreeBSD netbook Matthias Apitz | - No system with backdoors like Apple/Android E-mail: g...@unixarea.de | - Never being an iSlave WWW: http://www.unixarea.de/ | - No proprietary attachments, no HTML/RTF in E-mail phone: +49-170-4527211 | - Respect for open standards ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Release 9.1 and 3G usb Modem
Hello all. I have a latitude e6400 with FreeBSD Release 9.1. And i can't get the USB modem working. I tried with umodem, u3g but no luck :( -- Dmesg root@:/root # dmesg Copyright (c) 1992-2012 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 9.1-RELEASE #0 r243826: Tue Dec 4 06:55:39 UTC 2012 r...@obrian.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386 CPU: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz (2261.05-MHz 686-class CPU) Origin = GenuineIntel Id = 0x1067a Family = 6 Model = 17 Stepping = 10 Features=0xbfebfbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE Features2=0x408e3fdSSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE AMD Features=0x2010NX,LM AMD Features2=0x1LAHF TSC: P-state invariant, performance statistics real memory = 2147483648 (2048 MB) avail memory = 1967104000 (1875 MB) Event timer LAPIC quality 400 ACPI APIC Table: DELL M09 FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0: Changing APIC ID to 2 ioapic0 Version 2.0 irqs 0-23 on motherboard kbd1 at kbdmux0 kqemu version 0x00010400 kqemu: KQEMU installed, max_locked_mem=980872kB. acpi0: DELL M09 on motherboard Timecounter HPET frequency 14318180 Hz quality 950 Event timer HPET frequency 14318180 Hz quality 450 Event timer HPET1 frequency 14318180 Hz quality 440 Event timer HPET2 frequency 14318180 Hz quality 440 Event timer HPET3 frequency 14318180 Hz quality 440 acpi0: reservation of 0, 9f000 (3) failed acpi0: reservation of 10, 78f4d400 (3) failed cpu0: ACPI CPU on acpi0 cpu1: ACPI CPU on acpi0 atrtc0: AT realtime clock port 0x70-0x71,0x72-0x77 irq 8 on acpi0 Event timer RTC frequency 32768 Hz quality 0 attimer0: AT timer port 0x40-0x43,0x50-0x53 irq 2 on acpi0 Timecounter i8254 frequency 1193182 Hz quality 0 Event timer i8254 frequency 1193182 Hz quality 100 Timecounter ACPI-fast frequency 3579545 Hz quality 900 acpi_timer0: 24-bit timer at 3.579545MHz port 0x1008-0x100b on acpi0 acpi_ec0: Embedded Controller: GPE 0x11 port 0x930,0x934 on acpi0 pcib0: ACPI Host-PCI bridge port 0xcf8-0xcff on acpi0 pci0: ACPI PCI bus on pcib0 vgapci0: VGA-compatible display port 0xef70-0xef77 mem 0xf6c0-0xf6ff,0xe000-0xefff irq 16 at device 2.0 on pci0 agp0: Intel GM45 SVGA controller on vgapci0 agp0: aperture size is 256M, detected 32764k stolen memory vgapci1: VGA-compatible display mem 0xf6b0-0xf6bf at device 2.1 on pci0 pci0: simple comms at device 3.0 (no driver attached) atapci0: Intel ATA controller port 0xef78-0xef7f,0xef68-0xef6b,0xef80-0xef87,0xef6c-0xef6f,0xef90-0xef9f irq 18 at device 3.2 on pci0 ata2: ATA channel at channel 0 on atapci0 ata3: ATA channel at channel 1 on atapci0 pci0: simple comms, UART at device 3.3 (no driver attached) em0: Intel(R) PRO/1000 Network Connection 7.3.2 port 0xefe0-0xefff mem 0xf6ae-0xf6af,0xf6adb000-0xf6adbfff irq 22 at device 25.0 on pci0 em0: Using an MSI interrupt em0: Ethernet address: 00:1e:c9:25:e8:07 uhci0: Intel 82801I (ICH9) USB controller port 0x6f60-0x6f7f irq 20 at device 26.0 on pci0 uhci0: LegSup = 0x2f00 usbus0 on uhci0 uhci1: Intel 82801I (ICH9) USB controller port 0x6f80-0x6f9f irq 21 at device 26.1 on pci0 uhci1: LegSup = 0x2f00 usbus1 on uhci1 uhci2: Intel 82801I (ICH9) USB controller port 0x6fa0-0x6fbf irq 22 at device 26.2 on pci0 uhci2: LegSup = 0x2f00 usbus2 on uhci2 ehci0: Intel 82801I (ICH9) USB 2.0 controller mem 0xfed1c400-0xfed1c7ff irq 22 at device 26.7 on pci0 usbus3: EHCI version 1.0 usbus3 on ehci0 hdac0: Intel 82801I HDA Controller mem 0xf6adc000-0xf6ad irq 21 at device 27.0 on pci0 pcib1: ACPI PCI-PCI bridge at device 28.0 on pci0 pci11: ACPI PCI bus on pcib1 pcib2: ACPI PCI-PCI bridge at device 28.1 on pci0 pci12: ACPI PCI bus on pcib2 iwn0: Intel Ultimate N WiFi Link 5300 mem 0xf69fe000-0xf69f irq 17 at device 0.0 on pci12 pcib3: ACPI PCI-PCI bridge at device 28.2 on pci0 pci13: ACPI PCI bus on pcib3 uhci3: Intel 82801I (ICH9) USB controller port 0x6f00-0x6f1f irq 20 at device 29.0 on pci0 uhci3: LegSup = 0x2f00 usbus4 on uhci3 uhci4: Intel 82801I (ICH9) USB controller port 0x6f20-0x6f3f irq 21 at device 29.1 on pci0 uhci4: LegSup = 0x2f00 usbus5 on uhci4 uhci5: Intel 82801I (ICH9) USB controller port 0x6f40-0x6f5f irq 22 at device 29.2 on pci0 uhci5: LegSup = 0x2f00 usbus6 on uhci5 ehci1: Intel 82801I (ICH9) USB 2.0 controller mem 0xfed1c000-0xfed1c3ff irq 20 at device 29.7 on pci0 usbus7: EHCI version 1.0 usbus7 on ehci1 pcib4: ACPI PCI-PCI bridge at device 30.0 on pci0 pci3: ACPI PCI bus on pcib4 cbb0: RF5C476 PCI-CardBus Bridge irq 19 at device 1.0 on pci3 cardbus0: CardBus bus on cbb0 pccard0: 16-bit
Re: Release 9.1 and 3G usb Modem
On 27 March 2013 16:29, Leonardo Santagostini lsantagost...@gmail.comwrote: Hello all. I have a latitude e6400 with FreeBSD Release 9.1. And i can't get the USB modem working. I tried with umodem, u3g but no luck :( [snip] ugen7.2: HUAWEI at usbus7 ugen7.2: HUAWEI at usbus7 (disconnected) ugen7.2: HUAWEI at usbus7 umodem0: HUAWEI HUAWEI Mobile, class 0/0, rev 2.00/1.02, addr 2 on usbus7 umodem0: data interface 0, has no CM over data, has no break umodem1: HUAWEI HUAWEI Mobile, class 0/0, rev 2.00/1.02, addr 2 on usbus7 umodem1: data interface 1, has no CM over data, has no break umodem2: HUAWEI HUAWEI Mobile, class 0/0, rev 2.00/1.02, addr 2 on usbus7 umodem2: data interface 2, has no CM over data, has no break umass0: HUAWEI HUAWEI Mobile, class 0/0, rev 2.00/1.02, addr 2 on usbus7 umass0: SCSI over Bulk-Only; quirks = 0x umass0:9:0:-1: Attached to scbus9 cd1 at umass-sim0 bus 0 scbus9 target 0 lun 0 cd1: HUAWEI Mass Storage 2.31 Removable CD-ROM SCSI-2 device cd1: 40.000MB/s transfers cd1: Attempt to query device size failed: NOT READY, Medium not present umass1: HUAWEI HUAWEI Mobile, class 0/0, rev 2.00/1.02, addr 2 on usbus7 umass1: SCSI over Bulk-Only; quirks = 0x umass1:10:1:-1: Attached to scbus10 da0 at umass-sim1 bus 1 scbus10 target 0 lun 0 da0: HUAWEI SD Storage 2.31 Removable Direct Access SCSI-2 device da0: 40.000MB/s transfers da0: Attempt to query device size failed: NOT READY, Medium not present [snip] Huawei modem, as I can see. That should be easy. Connect to the modem through HyperTerminal or Putty on a different machine Issue the command: AT^U2DIAG=0 That should disable the virtual CD-ROM and FreeBSD will see the modem. Here are some commands you'll need to know about: Do you have a Windows PC near you? If you plug the device into it and the virtualCD pops up, then it means command was not successful. The fact that fake CD still shows means command did not succeed! AT^u2diag=0 (all off) AT^u2diag=1 (CD on, SD off) AT^u2diag=256 (CD off, SD is on) AT^u2diag=255 (all on - including SD Card) AT^u2diag=276 (Factory Reset) A+CLAC - Display all available commands. However it does not tell you how to use them And here is a working ppp.conf - but you need to change the *bolded* values to match your end of the environment:) u3g: set device */dev/cuaU0.0* set server /var/run/3g-internet 0177 set speed 921600 set timeout 0 set authname *saf* set authkey *data* set dial ABORT BUSY ABORT NO\\sTIMEOUT 2 \ \\ \ AT OK-AT-OK \ AT+CFUN=1 OK-AT-OK \ AT+CMEE=2 OK-AT-OK \ AT+CSQ OK \ AT+CGDCONT=1,\\\IP\\\,\\\*APN*\\\ OK \ ATD**99#* CONNECT set crtscts on disable vjcomp disable acfcomp disable deflate disable deflate24 disable pred1 disable protocomp disable mppe disable ipv6cp disable lqr disable echo #nat enable yes enable dns resolv writable set dns 8.8.8.8 set ifaddr 10.1.0.2/0 10.1.0.1/0 255.255.255.255 0.0.0.0 add default HISADDR # See ppp.link* Lemme know if you get stuck. Also, always give details about modem - manufacturer, model... -- Best regards, Odhiambo WASHINGTON, Nairobi,KE +254733744121/+254722743223 I can't hear you -- I'm using the scrambler. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Release 9.1 and 3G usb Modem
Hello Odhiambo . The 3G model is Huawei E173 with Movistar Argentina. Ive tried but i cant see in windows de USB port to have a serial link :( Saludos / Regards Leonardo Santagostini 2013/3/27 Odhiambo Washington odhia...@gmail.com On 27 March 2013 16:29, Leonardo Santagostini lsantagost...@gmail.comwrote: Hello all. I have a latitude e6400 with FreeBSD Release 9.1. And i can't get the USB modem working. I tried with umodem, u3g but no luck :( [snip] ugen7.2: HUAWEI at usbus7 ugen7.2: HUAWEI at usbus7 (disconnected) ugen7.2: HUAWEI at usbus7 umodem0: HUAWEI HUAWEI Mobile, class 0/0, rev 2.00/1.02, addr 2 on usbus7 umodem0: data interface 0, has no CM over data, has no break umodem1: HUAWEI HUAWEI Mobile, class 0/0, rev 2.00/1.02, addr 2 on usbus7 umodem1: data interface 1, has no CM over data, has no break umodem2: HUAWEI HUAWEI Mobile, class 0/0, rev 2.00/1.02, addr 2 on usbus7 umodem2: data interface 2, has no CM over data, has no break umass0: HUAWEI HUAWEI Mobile, class 0/0, rev 2.00/1.02, addr 2 on usbus7 umass0: SCSI over Bulk-Only; quirks = 0x umass0:9:0:-1: Attached to scbus9 cd1 at umass-sim0 bus 0 scbus9 target 0 lun 0 cd1: HUAWEI Mass Storage 2.31 Removable CD-ROM SCSI-2 device cd1: 40.000MB/s transfers cd1: Attempt to query device size failed: NOT READY, Medium not present umass1: HUAWEI HUAWEI Mobile, class 0/0, rev 2.00/1.02, addr 2 on usbus7 umass1: SCSI over Bulk-Only; quirks = 0x umass1:10:1:-1: Attached to scbus10 da0 at umass-sim1 bus 1 scbus10 target 0 lun 0 da0: HUAWEI SD Storage 2.31 Removable Direct Access SCSI-2 device da0: 40.000MB/s transfers da0: Attempt to query device size failed: NOT READY, Medium not present [snip] Huawei modem, as I can see. That should be easy. Connect to the modem through HyperTerminal or Putty on a different machine Issue the command: AT^U2DIAG=0 That should disable the virtual CD-ROM and FreeBSD will see the modem. Here are some commands you'll need to know about: Do you have a Windows PC near you? If you plug the device into it and the virtualCD pops up, then it means command was not successful. The fact that fake CD still shows means command did not succeed! AT^u2diag=0 (all off) AT^u2diag=1 (CD on, SD off) AT^u2diag=256 (CD off, SD is on) AT^u2diag=255 (all on - including SD Card) AT^u2diag=276 (Factory Reset) A+CLAC - Display all available commands. However it does not tell you how to use them And here is a working ppp.conf - but you need to change the *bolded* values to match your end of the environment:) u3g: set device */dev/cuaU0.0* set server /var/run/3g-internet 0177 set speed 921600 set timeout 0 set authname *saf* set authkey *data* set dial ABORT BUSY ABORT NO\\sTIMEOUT 2 \ \\ \ AT OK-AT-OK \ AT+CFUN=1 OK-AT-OK \ AT+CMEE=2 OK-AT-OK \ AT+CSQ OK \ AT+CGDCONT=1,\\\IP\\\,\\\*APN*\\\ OK \ ATD**99#* CONNECT set crtscts on disable vjcomp disable acfcomp disable deflate disable deflate24 disable pred1 disable protocomp disable mppe disable ipv6cp disable lqr disable echo #nat enable yes enable dns resolv writable set dns 8.8.8.8 set ifaddr 10.1.0.2/0 10.1.0.1/0 255.255.255.255 0.0.0.0 add default HISADDR # See ppp.link* Lemme know if you get stuck. Also, always give details about modem - manufacturer, model... -- Best regards, Odhiambo WASHINGTON, Nairobi,KE +254733744121/+254722743223 I can't hear you -- I'm using the scrambler. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Release 9.1 and 3G usb Modem
On Windows, install the modem drivers and make it usable. Then connect to the port on which it is installed using putty or HyperTerminal. I am hoping you know how to do that. Then type the commands: at^u2diag=0 ENTER atz ENTER Disconnect modem and connect to FreeBSD. You will see the modem correctly identified and connected to a port. On Windows, when you go to Hardware-Device Manager, look at the Serial ports available. One of them MUST be the one the modem is using! On 27 March 2013 23:09, Leonardo Santagostini lsantagost...@gmail.comwrote: Hello Odhiambo . The 3G model is Huawei E173 with Movistar Argentina. Ive tried but i cant see in windows de USB port to have a serial link :( Saludos / Regards Leonardo Santagostini 2013/3/27 Odhiambo Washington odhia...@gmail.com On 27 March 2013 16:29, Leonardo Santagostini lsantagost...@gmail.comwrote: Hello all. I have a latitude e6400 with FreeBSD Release 9.1. And i can't get the USB modem working. I tried with umodem, u3g but no luck :( [snip] ugen7.2: HUAWEI at usbus7 ugen7.2: HUAWEI at usbus7 (disconnected) ugen7.2: HUAWEI at usbus7 umodem0: HUAWEI HUAWEI Mobile, class 0/0, rev 2.00/1.02, addr 2 on usbus7 umodem0: data interface 0, has no CM over data, has no break umodem1: HUAWEI HUAWEI Mobile, class 0/0, rev 2.00/1.02, addr 2 on usbus7 umodem1: data interface 1, has no CM over data, has no break umodem2: HUAWEI HUAWEI Mobile, class 0/0, rev 2.00/1.02, addr 2 on usbus7 umodem2: data interface 2, has no CM over data, has no break umass0: HUAWEI HUAWEI Mobile, class 0/0, rev 2.00/1.02, addr 2 on usbus7 umass0: SCSI over Bulk-Only; quirks = 0x umass0:9:0:-1: Attached to scbus9 cd1 at umass-sim0 bus 0 scbus9 target 0 lun 0 cd1: HUAWEI Mass Storage 2.31 Removable CD-ROM SCSI-2 device cd1: 40.000MB/s transfers cd1: Attempt to query device size failed: NOT READY, Medium not present umass1: HUAWEI HUAWEI Mobile, class 0/0, rev 2.00/1.02, addr 2 on usbus7 umass1: SCSI over Bulk-Only; quirks = 0x umass1:10:1:-1: Attached to scbus10 da0 at umass-sim1 bus 1 scbus10 target 0 lun 0 da0: HUAWEI SD Storage 2.31 Removable Direct Access SCSI-2 device da0: 40.000MB/s transfers da0: Attempt to query device size failed: NOT READY, Medium not present [snip] Huawei modem, as I can see. That should be easy. Connect to the modem through HyperTerminal or Putty on a different machine Issue the command: AT^U2DIAG=0 That should disable the virtual CD-ROM and FreeBSD will see the modem. Here are some commands you'll need to know about: Do you have a Windows PC near you? If you plug the device into it and the virtualCD pops up, then it means command was not successful. The fact that fake CD still shows means command did not succeed! AT^u2diag=0 (all off) AT^u2diag=1 (CD on, SD off) AT^u2diag=256 (CD off, SD is on) AT^u2diag=255 (all on - including SD Card) AT^u2diag=276 (Factory Reset) A+CLAC - Display all available commands. However it does not tell you how to use them And here is a working ppp.conf - but you need to change the *bolded* values to match your end of the environment:) u3g: set device */dev/cuaU0.0* set server /var/run/3g-internet 0177 set speed 921600 set timeout 0 set authname *saf* set authkey *data* set dial ABORT BUSY ABORT NO\\sTIMEOUT 2 \ \\ \ AT OK-AT-OK \ AT+CFUN=1 OK-AT-OK \ AT+CMEE=2 OK-AT-OK \ AT+CSQ OK \ AT+CGDCONT=1,\\\IP\\\,\\\*APN*\\\ OK \ ATD**99#* CONNECT set crtscts on disable vjcomp disable acfcomp disable deflate disable deflate24 disable pred1 disable protocomp disable mppe disable ipv6cp disable lqr disable echo #nat enable yes enable dns resolv writable set dns 8.8.8.8 set ifaddr 10.1.0.2/0 10.1.0.1/0 255.255.255.255 0.0.0.0 add default HISADDR # See ppp.link* Lemme know if you get stuck. Also, always give details about modem - manufacturer, model... -- Best regards, Odhiambo WASHINGTON, Nairobi,KE +254733744121/+254722743223 I can't hear you -- I'm using the scrambler. -- Best regards, Odhiambo WASHINGTON, Nairobi,KE +254733744121/+254722743223 I can't hear you -- I'm using the scrambler. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Release 9.1 and 3G usb Modem
El día Wednesday, March 27, 2013 a las 05:09:22PM -0300, Leonardo Santagostini escribió: Hello Odhiambo . The 3G model is Huawei E173 with Movistar Argentina. Ive tried but i cant see in windows de USB port to have a serial link :( Saludos / Regards Leonardo Santagostini Hi, Pls check if this E173 card is supported by the /sys/dev/usb/serial/u3g.c driver; figure out the vendorID and productID of this card and check if it is in the driver to attach to; I own an E220 and an E1750 Huawei card, both are just working fine without any tricks. matthias -- Sent from my FreeBSD netbook Matthias Apitz | - No system with backdoors like Apple/Android E-mail: g...@unixarea.de | - Never being an iSlave WWW: http://www.unixarea.de/ | - No proprietary attachments, no HTML/RTF in E-mail phone: +49-170-4527211 | - Respect for open standards ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Release 9.1 and 3G usb Modem
Hello Matthias, thanks for your response, Odhiambo was helping me with this modem with no luck. Tomorrow we will continuing trying to get this modem running. Thanks all, and thanks Odhiambo for all the support he is giving to get this piece working :) I really apreciate it !!! Saludos / Regards Leonardo Santagostini 2013/3/27 Matthias Apitz g...@unixarea.de El día Wednesday, March 27, 2013 a las 05:09:22PM -0300, Leonardo Santagostini escribió: Hello Odhiambo . The 3G model is Huawei E173 with Movistar Argentina. Ive tried but i cant see in windows de USB port to have a serial link :( Saludos / Regards Leonardo Santagostini Hi, Pls check if this E173 card is supported by the /sys/dev/usb/serial/u3g.c driver; figure out the vendorID and productID of this card and check if it is in the driver to attach to; I own an E220 and an E1750 Huawei card, both are just working fine without any tricks. matthias -- Sent from my FreeBSD netbook Matthias Apitz | - No system with backdoors like Apple/Android E-mail: g...@unixarea.de | - Never being an iSlave WWW: http://www.unixarea.de/ | - No proprietary attachments, no HTML/RTF in E-mail phone: +49-170-4527211 | - Respect for open standards ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org