Re: SMP options and core dump failure
On Tue, July 3, 2007 02:59, Yong Rao wrote: Hello, We have a problem with SMP kernel. It could not dump out core when the crash happens. Which version of FreeBSD? -Current? better ask in [EMAIL PROTECTED] or file a PR. http://www.freebsd.org/send-pr.html Rgds, Patrick I am able to isolate the problem to kernel configurations which have SMP enabled when used with 2 cpus. With ONE cpu the core dump works ok. I built the kernel with GENERIC, and deliberately crash the kernel (for testing purpose). The core dump works fine. Only added the options SMP and crashed the kernel, then prior to any pages being dumped out, it hangs there. Has someone successfully core dumped on a system using SMP kernel with multiple CPUs? I tried on two different boxes (different motherboards, CPUs and hard disks). Both got failed. I tried to enable the DDB, but don't know what to look for when it goes into ddb. Appreciate any pointers. a) The CPU information is CPU: Dual Core AMD Opteron(tm) Processor 280 (2405.47-MHz 686-class CPU) Origin = AuthenticAMD Id = 0x20f12 Stepping = 2 Features=0x178bfbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE ,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,S SE,SSE2,HTT Features2=0x1SSE3 AMD Features=0xe2500800SYSCALL,NX,MMX+,FFXSR,LM,3DNow+,3DNow AMD Features2=0x3LAHF,CMP Cores per package: 2 b) We also tried on another mother board, which has 2 CPUs. The CPU information is below. CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2800.11-MHz 686-class CPU) Origin = GenuineIntel Id = 0xf29 Stepping = 9 Features=0xbfebfbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE ,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE Features2=0x4400CNTX-ID,b14 real memory = 2147418112 (2047 MB) avail memory = 2096300032 (1999 MB) ACPI APIC Table: A M I OEMAPIC FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 6 c) The following are the prints when the dump hung. mem dump: start address = 0x4352, len=0x30 Fatal trap 12: page fault while in kernel mode cpuid = 1; apic id = 01 fault virtual address = 0x4352 fault code = supervisor read, page not present instruction pointer = 0x20:0xc9e9fc92 stack pointer = 0x28:0xebdbdbdc frame pointer = 0x28:0xebdbdbf8 code segment= base 0x0, limit 0xf, type 0x1b = DPL 0, pres 1, def32 1, gran 1 processor eflags= interrupt enabled, resume, IOPL = 0 current process = 74231 (pnicdbg) trap number = 12 panic: page fault cpuid = 1 Uptime: 1d18h27m42s Dumping 4030 MB (2 chunks) chunk 0: 1MB (154 pages) ... ok chunk 1: 4031MB (1031776 pages) (stopped and hung here) Thanks, Yong Rao Force10 Networks Inc. 350 Holger Way San Jose, CA 95132 408 571 6317 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
RE: SMP options and core dump failure
Thanks, Patrick! It is not the current version. It is FreeBSD localhost.localdomain 6.2-RELEASE FreeBSD 6.2-RELEASE #0: Fri Jun 15 11:02:24 PDT 2007 Thanks, Yong -Original Message- From: Gelsema, P (Patrick) - FreeBSD [mailto:[EMAIL PROTECTED] Sent: Tuesday, July 03, 2007 1:23 AM To: Yong Rao Cc: [EMAIL PROTECTED] Subject: Re: SMP options and core dump failure On Tue, July 3, 2007 02:59, Yong Rao wrote: Hello, We have a problem with SMP kernel. It could not dump out core when the crash happens. Which version of FreeBSD? -Current? better ask in [EMAIL PROTECTED] or file a PR. http://www.freebsd.org/send-pr.html Rgds, Patrick I am able to isolate the problem to kernel configurations which have SMP enabled when used with 2 cpus. With ONE cpu the core dump works ok. I built the kernel with GENERIC, and deliberately crash the kernel (for testing purpose). The core dump works fine. Only added the options SMP and crashed the kernel, then prior to any pages being dumped out, it hangs there. Has someone successfully core dumped on a system using SMP kernel with multiple CPUs? I tried on two different boxes (different motherboards, CPUs and hard disks). Both got failed. I tried to enable the DDB, but don't know what to look for when it goes into ddb. Appreciate any pointers. a) The CPU information is CPU: Dual Core AMD Opteron(tm) Processor 280 (2405.47-MHz 686-class CPU) Origin = AuthenticAMD Id = 0x20f12 Stepping = 2 Features=0x178bfbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE ,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,S SE,SSE2,HTT Features2=0x1SSE3 AMD Features=0xe2500800SYSCALL,NX,MMX+,FFXSR,LM,3DNow+,3DNow AMD Features2=0x3LAHF,CMP Cores per package: 2 b) We also tried on another mother board, which has 2 CPUs. The CPU information is below. CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2800.11-MHz 686-class CPU) Origin = GenuineIntel Id = 0xf29 Stepping = 9 Features=0xbfebfbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE ,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE Features2=0x4400CNTX-ID,b14 real memory = 2147418112 (2047 MB) avail memory = 2096300032 (1999 MB) ACPI APIC Table: A M I OEMAPIC FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 6 c) The following are the prints when the dump hung. mem dump: start address = 0x4352, len=0x30 Fatal trap 12: page fault while in kernel mode cpuid = 1; apic id = 01 fault virtual address = 0x4352 fault code = supervisor read, page not present instruction pointer = 0x20:0xc9e9fc92 stack pointer = 0x28:0xebdbdbdc frame pointer = 0x28:0xebdbdbf8 code segment= base 0x0, limit 0xf, type 0x1b = DPL 0, pres 1, def32 1, gran 1 processor eflags= interrupt enabled, resume, IOPL = 0 current process = 74231 (pnicdbg) trap number = 12 panic: page fault cpuid = 1 Uptime: 1d18h27m42s Dumping 4030 MB (2 chunks) chunk 0: 1MB (154 pages) ... ok chunk 1: 4031MB (1031776 pages) (stopped and hung here) Thanks, Yong Rao Force10 Networks Inc. 350 Holger Way San Jose, CA 95132 408 571 6317 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
SMP options and core dump failure
Hello, We have a problem with SMP kernel. It could not dump out core when the crash happens. I am able to isolate the problem to kernel configurations which have SMP enabled when used with 2 cpus. With ONE cpu the core dump works ok. I built the kernel with GENERIC, and deliberately crash the kernel (for testing purpose). The core dump works fine. Only added the options SMP and crashed the kernel, then prior to any pages being dumped out, it hangs there. Has someone successfully core dumped on a system using SMP kernel with multiple CPUs? I tried on two different boxes (different motherboards, CPUs and hard disks). Both got failed. I tried to enable the DDB, but don't know what to look for when it goes into ddb. Appreciate any pointers. a) The CPU information is CPU: Dual Core AMD Opteron(tm) Processor 280 (2405.47-MHz 686-class CPU) Origin = AuthenticAMD Id = 0x20f12 Stepping = 2 Features=0x178bfbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE ,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,S SE,SSE2,HTT Features2=0x1SSE3 AMD Features=0xe2500800SYSCALL,NX,MMX+,FFXSR,LM,3DNow+,3DNow AMD Features2=0x3LAHF,CMP Cores per package: 2 b) We also tried on another mother board, which has 2 CPUs. The CPU information is below. CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2800.11-MHz 686-class CPU) Origin = GenuineIntel Id = 0xf29 Stepping = 9 Features=0xbfebfbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE ,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE Features2=0x4400CNTX-ID,b14 real memory = 2147418112 (2047 MB) avail memory = 2096300032 (1999 MB) ACPI APIC Table: A M I OEMAPIC FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 6 c) The following are the prints when the dump hung. mem dump: start address = 0x4352, len=0x30 Fatal trap 12: page fault while in kernel mode cpuid = 1; apic id = 01 fault virtual address = 0x4352 fault code = supervisor read, page not present instruction pointer = 0x20:0xc9e9fc92 stack pointer = 0x28:0xebdbdbdc frame pointer = 0x28:0xebdbdbf8 code segment= base 0x0, limit 0xf, type 0x1b = DPL 0, pres 1, def32 1, gran 1 processor eflags= interrupt enabled, resume, IOPL = 0 current process = 74231 (pnicdbg) trap number = 12 panic: page fault cpuid = 1 Uptime: 1d18h27m42s Dumping 4030 MB (2 chunks) chunk 0: 1MB (154 pages) ... ok chunk 1: 4031MB (1031776 pages) (stopped and hung here) Thanks, Yong Rao Force10 Networks Inc. 350 Holger Way San Jose, CA 95132 408 571 6317 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
