Re: Upgrade 6.4-stable to 7.3
Hi, I did a source upgrade on one box from 6.4 to 7.2 or 7.3 without any problems. I later did a source upgrade to 8.0 on the same machine just to find out that USB has some problems, I went then back to 7.3 on this machine. I also did some source upgrades from 7.x to 8.0 on some other machines without any problems. On Tuesday 27 July 2010 22:02:48 Michael Doyle wrote: In the past, I've usually done a wipe-and-reinstall when moving between major version numbers but I would rather avoid that this time around. I never did this since 5.2. The upgrades always worked for me. Also, would people recommend staying with version 7.3 or jumping all the way to version 8.1 ? I would first install 7.3, check if all works and then do a source upgrade. Save the source tree for 7.3 just for the case you have to go back. CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz (2800.11-MHz 686-class CPU) Origin = GenuineIntel Id = 0xf41 Stepping = 1 Not so new. Just like the machine which gave me the problem with 8.0. I never tried 8.1 on this machine. uhci0: UHCI (generic) USB controller port 0xcce0-0xccff irq 20 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] usb0: UHCI (generic) USB controller on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered Somewhere here were the problems. uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 You have Intel, I have NEC, so, you should not face the same problems I did. If they are not solved meanwhile. atkbd0: AT Keyboard irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: PS/2 Mouse irq 12 on atkbdc0 Just one note. You are managing this machine remotely? No X on it? Take the two step approach and you should have a running system afterwards. Erich ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Upgrade 6.4-stable to 7.3
On 28 July 2010 11:47, Erich Dollansky erichfreebsdl...@ovitrap.com wrote: Hi, I did a source upgrade on one box from 6.4 to 7.2 or 7.3 without any problems. I later did a source upgrade to 8.0 on the same machine just to find out that USB has some problems, I went then back to 7.3 on this machine. I also did some source upgrades from 7.x to 8.0 on some other machines without any problems. On Tuesday 27 July 2010 22:02:48 Michael Doyle wrote: In the past, I've usually done a wipe-and-reinstall when moving between major version numbers but I would rather avoid that this time around. I never did this since 5.2. The upgrades always worked for me. the jump from 4-5 was funk if i remember, due to the rc structure changing completely and you would normally have wanted to take advantage of ufs2 Also, would people recommend staying with version 7.3 or jumping all the way to version 8.1 ? I would first install 7.3, check if all works and then do a source upgrade. Save the source tree for 7.3 just for the case you have to go back. CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz (2800.11-MHz 686-class CPU) Origin = GenuineIntel Id = 0xf41 Stepping = 1 Not so new. Just like the machine which gave me the problem with 8.0. I never tried 8.1 on this machine. uhci0: UHCI (generic) USB controller port 0xcce0-0xccff irq 20 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] usb0: UHCI (generic) USB controller on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered Somewhere here were the problems. uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 You have Intel, I have NEC, so, you should not face the same problems I did. If they are not solved meanwhile. atkbd0: AT Keyboard irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: PS/2 Mouse irq 12 on atkbdc0 Just one note. You are managing this machine remotely? No X on it? Take the two step approach and you should have a running system afterwards. Erich ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Upgrade 6.4-stable to 7.3
On 28 Jul 2010, at 11:47, Erich Dollansky wrote: Just one note. You are managing this machine remotely? No X on it? Take the two step approach and you should have a running system afterwards. It's a mail server, no X but I do have physical access. Michael Doyle Network Administrator, Co-operation Ireland mdo...@cooperationireland.org http://www.cooperationireland.org/ Co-operation Ireland Events: http://www.cooperationireland.org/supportus/overview Phone: +353-1-6610588 Fax: +353-1-6618456 Mobile: 00353-87-2357853 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Upgrade 6.4-stable to 7.3
I would like to upgrade a server that is currently running version 6.4 up to version 7.3 Having looked at /usr/src/UPDATING on a 7.3 machine, I don't see any major problems flagged. Given that I have console access to this machine, and I want to preserve the user directories (it's our mail server) would I be better off doing a source upgrade or a binary upgrade? In the past, I've usually done a wipe-and-reinstall when moving between major version numbers but I would rather avoid that this time around. Also, would people recommend staying with version 7.3 or jumping all the way to version 8.1 ? Output of dmesg below: FreeBSD 6.4-STABLE #16: Mon Jul 26 22:41:28 IST 2010 r...@mail.cooperationireland.org:/usr/obj/usr/src/sys/GENERIC ACPI APIC Table: DELL PE830 Timecounter i8254 frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz (2800.11-MHz 686-class CPU) Origin = GenuineIntel Id = 0xf41 Stepping = 1 Features = 0xbfebfbff FPU ,VME ,DE ,PSE ,TSC ,MSR ,PAE ,MCE ,CX8 ,APIC ,SEP ,MTRR ,PGE ,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE Features2=0x641dSSE3,RSVD2,MON,DS_CPL,CNXT-ID,CX16,xTPR AMD Features=0x2010NX,LM Logical CPUs per core: 2 real memory = 1073479680 (1023 MB) avail memory = 1037283328 (989 MB) ioapic0: Changing APIC ID to 2 ioapic1: Changing APIC ID to 3 ioapic0 Version 2.0 irqs 0-23 on motherboard ioapic1 Version 2.0 irqs 32-55 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) hptrr: HPT RocketRAID controller driver v1.1 (Jul 26 2010 22:41:10) acpi0: DELL PE830 on motherboard acpi0: Power Button (fixed) Timecounter ACPI-fast frequency 3579545 Hz quality 1000 acpi_timer0: 24-bit timer at 3.579545MHz port 0x808-0x80b on acpi0 acpi_hpet0: High Precision Event Timer iomem 0xfed0-0xfed003ff on acpi0 Timecounter HPET frequency 14318180 Hz quality 900 cpu0: ACPI CPU on acpi0 pcib0: ACPI Host-PCI bridge port 0xcf8-0xcff on acpi0 pci0: ACPI PCI bus on pcib0 pcib1: ACPI PCI-PCI bridge at device 1.0 on pci0 pci1: ACPI PCI bus on pcib1 pcib2: ACPI PCI-PCI bridge at device 28.0 on pci0 pci2: ACPI PCI bus on pcib2 pcib3: ACPI PCI-PCI bridge at device 0.0 on pci2 pci3: ACPI PCI bus on pcib3 pcib4: ACPI PCI-PCI bridge at device 28.4 on pci0 pci4: ACPI PCI bus on pcib4 bge0: Broadcom BCM5750 B1, ASIC rev. 0x4101 mem 0xfe8f-0xfe8f irq 16 at device 0.0 on pci4 miibus0: MII bus on bge0 brgphy0: BCM5750 10/100/1000baseTX PHY on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bge0: Ethernet address: 00:12:3f:2a:1a:ee pcib5: ACPI PCI-PCI bridge at device 28.5 on pci0 pci5: ACPI PCI bus on pcib5 uhci0: UHCI (generic) USB controller port 0xcce0-0xccff irq 20 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] usb0: UHCI (generic) USB controller on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: UHCI (generic) USB controller port 0xccc0-0xccdf irq 21 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] usb1: UHCI (generic) USB controller on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: UHCI (generic) USB controller port 0xcca0-0xccbf irq 22 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] usb2: UHCI (generic) USB controller on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ehci0: Intel 82801GB/R (ICH7) USB 2.0 controller mem 0xfeb00400-0xfeb007ff irq 20 at device 29.7 on pci0 ehci0: [GIANT-LOCKED] usb3: EHCI version 1.0 usb3: wrong number of companions (7 != 3) usb3: companion controllers, 2 ports each: usb0 usb1 usb2 usb3: Intel 82801GB/R (ICH7) USB 2.0 controller on ehci0 usb3: USB revision 2.0 uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub3: 6 ports with 6 removable, self powered pcib6: ACPI PCI-PCI bridge at device 30.0 on pci0 pci6: ACPI PCI bus on pcib6 pci6: display, VGA at device 5.0 (no driver attached) isab0: PCI-ISA bridge at device 31.0 on pci0 isa0: ISA bus on isab0 atapci0: Intel ICH7 UDMA100 controller port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0 ata0: ATA channel 0 on atapci0 ata1: ATA channel 1 on atapci0 atapci1: Intel ICH7 SATA300 controller port 0xcc98-0xcc9f, 0xcc90-0xcc93,0xcc80-0xcc87,0xcc78-0xcc7b,0xcc60-0xcc6f mem 0xfeb0-0xfeb003ff irq 20 at device 31.2 on pci0 ata2: ATA channel 0 on atapci1 ata3: ATA channel 1 on atapci1 pci0: serial bus, SMBus at device 31.3 (no driver attached) fdc0: floppy drive controller port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FAST] fd0: 1440-KB 3.5 drive on fdc0 drive 0 atkbdc0: Keyboard controller (i8042) port 0x60,0x64 irq 1 on acpi0 atkbd0: AT Keyboard irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0:
Re: Upgrade 6.4-stable to 7.3
On Tue, Jul 27, 2010 at 03:02:48PM +0100, Michael Doyle wrote: I would like to upgrade a server that is currently running version 6.4 up to version 7.3 Having looked at /usr/src/UPDATING on a 7.3 machine, I don't see any major problems flagged. Given that I have console access to this machine, and I want to preserve the user directories (it's our mail server) would I be better off doing a source upgrade or a binary upgrade? Since you are running 6.4-STABLE, I think you will have to do a source upgrade. AFAIK binary upgrades are only supported when going from one -RELEASE to another (so 6.4-RELEASE to 7.3-RELEASE should be possible with a binary upgrade, 6.4-STABLE to 7.3-RELEASE would not.) In the past, I've usually done a wipe-and-reinstall when moving between major version numbers but I would rather avoid that this time around. Also, would people recommend staying with version 7.3 or jumping all the way to version 8.1 ? Unless you have some specific reason to use 7.3 you might as well go all the way up to 8.1. You should probably do it in two steps though - first from 6.4 to 7.3 and then from 7.3 to 8.1 Just remember to make good backups first, just in case something goes wrong. (There should not be any serious problems involved - the source upgrades I have done from 6.x to 7.x and later from 7.x to 8.x were fairly uneventful - but you never know what might happen.) -- Insert your favourite quote here. Erik Trulsson ertr1...@student.uu.se ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Upgrade 6.4-stable to 7.3
On 27 July 2010 16:13, Erik Trulsson ertr1...@student.uu.se wrote: On Tue, Jul 27, 2010 at 03:02:48PM +0100, Michael Doyle wrote: I would like to upgrade a server that is currently running version 6.4 up to version 7.3 Having looked at /usr/src/UPDATING on a 7.3 machine, I don't see any major problems flagged. Given that I have console access to this machine, and I want to preserve the user directories (it's our mail server) would I be better off doing a source upgrade or a binary upgrade? Since you are running 6.4-STABLE, I think you will have to do a source upgrade. AFAIK binary upgrades are only supported when going from one -RELEASE to another (so 6.4-RELEASE to 7.3-RELEASE should be possible with a binary upgrade, 6.4-STABLE to 7.3-RELEASE would not.) In the past, I've usually done a wipe-and-reinstall when moving between major version numbers but I would rather avoid that this time around. Also, would people recommend staying with version 7.3 or jumping all the way to version 8.1 ? Unless you have some specific reason to use 7.3 you might as well go all the way up to 8.1. You should probably do it in two steps though - first from 6.4 to 7.3 and then from 7.3 to 8.1 Just remember to make good backups first, just in case something goes wrong. (There should not be any serious problems involved - the source upgrades I have done from 6.x to 7.x and later from 7.x to 8.x were fairly uneventful - but you never know what might happen.) -- Insert your favourite quote here. Erik Trulsson ertr1...@student.uu.se ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org I did a remote upgrade of our dns caches at work (24 boxes) from various 6.x builds. I did it all from source, and in two steps, once to 7-STABLE then once to 8-STABLE. It went fine in most cases. One thing i noticed though was some of the boxes were in dangerously dedicated disk layout. The dev tree in 6.x and 7.x had devices in the format of /dev/ad0a and /dev/ad0s1a. However 8.x only presented /dev/ad0a devices, like you would predict. Whoever origionally built the boxes had s1 type in the fstab which caught me out on a few of them. Not ideal on remote boxes. Other than that though the upgrades we nice and easy. Make sure you recompile all your ports though with something like portmaster. After you have done that do a make delete-old delete-old-libs and delete-old-dirs from usr/src, once your done to clean up the base distro. here's my mergemaster conf to speed things up a little if you aren't familier with it. Just make sure the ignore files is tailored to you then run mergemaster with no flags $ cat /etc/mergemaster.rc AUTO_INSTALL=YES AUTO_UPGRADE=YES PRESERVE_FILES=yes #IGNORE_FILES=/etc/rc.d/* PRESERVE_FILES_DIR=/var/mergemaster/preserved-files-`date +%y%m%d-%H%M%S` IGNORE_FILES=/etc/crontab /etc/fstab /etc/group /etc/hosts /etc/inetd.conf /etc/make.conf /etc/master.passwd /etc/motd /etc/newsyslog.conf /etc/ntp.conf /etc/ntp.drift /etc/profile /etc/rc.conf /etc/resolv.conf /etc/services /etc/shells /etc/syslog.conf /etc/ssh/sshd_config /etc/ssh/ssh_host_key /etc/ssh/ssh_host_key.pub /etc/ssh/ssh_host_rsa_key /etc/ssh/ssh_host_rsa_key.pub /etc/passwd /etc/rc.conf.local /etc/zfs/exports /etc//namedb/named.conf /etc/periodic.conf /etc/hosts.allow /etc/hosts /etc/pf.conf /etc/sysctl.conf /etc/make.conf /etc/src.conf /etc/mail/aliases /etc/mail/mailer.conf /etc/remote ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org