Re: automounting of usb disks not working how to troubleshoot
On Thu, May 12, 2011 at 7:33 PM, Antonio Olivares olivares14...@gmail.com wrote: Dear folks, I have recently successfully updated an amd 64 bit machine from 8.1 to 8.2 release and reinstalled most of the previously installed ports. Now, I tried to use my usb disk and it is not automounting :( I like the convenience of automounting and I checked hal and dbus and they are both enabled and to be safe I deinstalled and installed them again and still does not automount. ugen5.2: HP at usbus5 umass0: HP c310w, class 0/0, rev 2.00/1.00, addr 2 on usbus5 umass0: SCSI over Bulk-Only; quirks = 0x umass0:2:0:-1: Attached to scbus2 da0 at umass-sim0 bus 0 scbus2 target 0 lun 0 da0: HP c310w 1.00 Removable Direct Access SCSI-2 device da0: 40.000MB/s transfers da0: 3819MB (7823296 512 byte sectors: 255H 63S/T 486C) [olivares@grullahighschool ~]$ ls /media/.hal-mtab /media/.hal-mtab [olivares@grullahighschool ~]$ cat /usr/local/etc/PolicyKit/PolicyKit.conf ?xml version=1.0 encoding=UTF-8? !-- -*- XML -*- -- !DOCTYPE pkconfig PUBLIC -//freedesktop//DTD PolicyKit Configuration 1.0//EN http://hal.freedesktop.org/releases/PolicyKit/1.0/config.dtd; !-- See the manual page PolicyKit.conf(5) for file format -- config version=0.1 define_admin_auth group=operator/ match action=org.freedesktop.hal.storage.mount-removable return result=yes/ /match match action=org.freedesktop.hal.storage.mount-fixed return result=yes/ /match match action=org.freedesktop.hal.storage.eject return result=yes/ /match /config Thank you for any pointers/advice/suggestions. Regards, Antonio Dear folks, I am trying out several things and reading and I have found several sites: http://gezeiten.org/post/2011/01/Xfce-4.8-on-BSD-flavors http://www.unix.com/unix-dummies-questions-answers/117249-using-usb-sticks-freebsd.html http://forums.freebsd.org/showthread.php?t=19410 Have not found any relevant information. Installed automounter from ports in sysutils/automount but still does not work. dbus and hald are enabled and installed. I just like the convenience of using automounting. If it is not going to be working, then I am fine with it. Thanks, Antonio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: automounting of usb disks not working how to troubleshoot
On Fri, May 13, 2011 at 5:53 PM, Antonio Olivares olivares14...@gmail.comwrote: Dear folks, I am trying out several things and reading and I have found several sites: http://gezeiten.org/post/2011/01/Xfce-4.8-on-BSD-flavors http://www.unix.com/unix-dummies-questions-answers/117249-using-usb-sticks-freebsd.html http://forums.freebsd.org/showthread.php?t=19410 Have not found any relevant information. Installed automounter from ports in sysutils/automount but still does not work. dbus and hald are enabled and installed. I just like the convenience of using automounting. If it is not going to be working, then I am fine with it. You may want to use devd(8)/devd.conf(5) for this. -- Adam Vande More ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
automounting of usb disks not working how to troubleshoot
Dear folks, I have recently successfully updated an amd 64 bit machine from 8.1 to 8.2 release and reinstalled most of the previously installed ports. Now, I tried to use my usb disk and it is not automounting :( I like the convenience of automounting and I checked hal and dbus and they are both enabled and to be safe I deinstalled and installed them again and still does not automount. ugen5.2: HP at usbus5 umass0: HP c310w, class 0/0, rev 2.00/1.00, addr 2 on usbus5 umass0: SCSI over Bulk-Only; quirks = 0x umass0:2:0:-1: Attached to scbus2 da0 at umass-sim0 bus 0 scbus2 target 0 lun 0 da0: HP c310w 1.00 Removable Direct Access SCSI-2 device da0: 40.000MB/s transfers da0: 3819MB (7823296 512 byte sectors: 255H 63S/T 486C) [olivares@grullahighschool ~]$ ls /media/.hal-mtab /media/.hal-mtab [olivares@grullahighschool ~]$ cat /usr/local/etc/PolicyKit/PolicyKit.conf ?xml version=1.0 encoding=UTF-8? !-- -*- XML -*- -- !DOCTYPE pkconfig PUBLIC -//freedesktop//DTD PolicyKit Configuration 1.0//EN http://hal.freedesktop.org/releases/PolicyKit/1.0/config.dtd; !-- See the manual page PolicyKit.conf(5) for file format -- config version=0.1 define_admin_auth group=operator/ match action=org.freedesktop.hal.storage.mount-removable return result=yes/ /match match action=org.freedesktop.hal.storage.mount-fixed return result=yes/ /match match action=org.freedesktop.hal.storage.eject return result=yes/ /match /config Thank you for any pointers/advice/suggestions. Regards, Antonio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
