Re: cdparanoia and atapicam question
On Tue, 7 Dec 2004 19:26:33 -0500, Dev Tugnait [EMAIL PROTECTED] wrote: Post your dmesg. Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.10-RELEASE #2: Sat Dec 4 14:03:29 GMT 2004 [EMAIL PROTECTED]:/usr/src/sys/compile/MANTOY Timecounter i8254 frequency 1193182 Hz CPU: Intel Pentium III (933.03-MHz 686-class CPU) Origin = GenuineIntel Id = 0x68a Stepping = 10 Features=0x387fbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE real memory = 1140785152 (1114048K bytes) avail memory = 1103495168 (1077632K bytes) Programming 24 pins in IOAPIC #0 IOAPIC #0 intpin 2 - irq 0 FreeBSD/SMP: Multiprocessor motherboard: 2 CPUs cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee0 cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee0 io0 (APIC): apic id: 2, version: 0x00178011, at 0xfec0 Preloaded elf kernel kernel at 0xc04de000. netsmb_dev: loaded Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 8 entries at 0xc00fdd20 npx0: math processor on motherboard npx0: INT 16 interface pcib0: Host to PCI bridge on motherboard pci0: PCI bus on pcib0 agp0: VIA 82C691 (Apollo Pro) host to PCI bridge mem 0xf000-0xf3ff at device 0.0 on pci0 pcib1: VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge at device 1.0 on pci0 pci1: PCI bus on pcib1 pci1: Intel i740 AGP SVGA controller at 0.0 irq 10 isab0: VIA 82C686 PCI-ISA bridge at device 7.0 on pci0 isa0: ISA bus on isab0 atapci0: VIA 82C686 ATA100 controller port 0xd000-0xd00f at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: VIA 83C572 USB controller port 0xd400-0xd41f irq 12 at device 7.2 on pci0 usb0: VIA 83C572 USB controller on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ums0: Logitech USB Receiver, rev 1.10/9.10, addr 2, iclass 3/1 ums0: 5 buttons and Z dir. uhci1: VIA 83C572 USB controller port 0xd800-0xd81f irq 12 at device 7.3 on pci0 usb1: VIA 83C572 USB controller on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered pci0: unknown card (vendor=0x1106, dev=0x3057) at 7.4 pcm0: Creative EMU10K1 port 0xdc00-0xdc1f irq 10 at device 11.0 on pci0 pcm0: TriTech TR28602 AC97 Codec dc0: 82c169 PNIC 10/100BaseTX port 0xe400-0xe4ff mem 0xf800-0xf8ff irq 11 at device 12.0 on pci0 dc0: Ethernet address: 00:02:e3:08:0b:e2 miibus0: MII bus on dc0 ukphy0: Generic IEEE 802.3u media interface on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto orm0: Option ROM at iomem 0xc-0xc7fff on isa0 pmtimer0 on isa0 fdc0: NEC 72065B or clone at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 atkbdc0: Keyboard controller (i8042) at port 0x60,0x64 on isa0 atkbd0: AT Keyboard flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 vga0: Generic ISA VGA at port 0x3c0-0x3df iomem 0xa-0xb on isa0 sc0: System console at flags 0x100 on isa0 sc0: VGA 16 virtual consoles, flags=0x300 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: Parallel port at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode plip0: PLIP network interface on ppbus0 lpt0: Printer on ppbus0 lpt0: Interrupt-driven port ppi0: Parallel I/O on ppbus0 APIC_IO: Testing 8254 interrupt delivery APIC_IO: routing 8254 via IOAPIC #0 intpin 2 IPsec: Initialized Security Association Processing. IP Filter: v3.4.31 initialized. Default = block all, Logging = disabled SMP: AP CPU #1 Launched! ad0: 19092MB WDC WD200BB-32CLB0 [38792/16/63] at ata0-master UDMA100 acd0: CD-RW SONY CD-RW CRX175A1 at ata1-master PIO4 Mounting root from ufs:/dev/ad0s3a cd0 at ata1 bus 0 target 0 lun 0 cd0: SONY CD-RW CRX175A1 5YS3 Removable CD-ROM SCSI-0 device cd0: 16.000MB/s transfers cd0: cd present [227290 x 2048 byte records] ad0: UDMA ICRC error reading fsbn 0 (ad0 bn 0; cn 0 tn 0 sn 0) retrying ad0: UDMA ICRC error reading fsbn 0 (ad0 bn 0; cn 0 tn 0 sn 0) retrying ad0: UDMA ICRC error reading fsbn 0 (ad0 bn 0; cn 0 tn 0 sn 0) retrying ad0: UDMA ICRC error reading fsbn 0 (ad0 bn 0; cn 0 tn 0 sn 0) falling back to PIO mode ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: cdparanoia and atapicam question
On Mon, 6 Dec 2004 09:22:50 -0500, Dev Tugnait [EMAIL PROTECTED] wrote: What is the output from cdparanoia -vsQ If you are trying to rip them to your harddis and cant figurecdparanoia use a frontend to it like grip. can't figure out what the problem would be, judging from this cdparanoia III release 9.8 (March 23, 2001) (C) 2001 Monty [EMAIL PROTECTED] and Xiphophorus FreeBSD porting (c) 2003 Simon 'corecode' Schubert [EMAIL PROTECTED] Report bugs to [EMAIL PROTECTED] http://www.xiph.org/paranoia/ Checking /dev/cd0 for cdrom... Could not stat /dev/cd0: No such file or directory Checking /dev/cd1 for cdrom... Could not stat /dev/cd1: No such file or directory Checking /dev/cd2 for cdrom... Could not stat /dev/cd2: No such file or directory Checking /dev/cd3 for cdrom... Could not stat /dev/cd3: No such file or directory Checking /dev/acd0 for cdrom... Could not stat /dev/acd0: No such file or directory Checking /dev/acd1 for cdrom... Could not stat /dev/acd1: No such file or directory Checking /dev/acd2 for cdrom... Could not stat /dev/acd2: No such file or directory Checking /dev/acd3 for cdrom... Could not stat /dev/acd3: No such file or directory Checking /dev/wcd0 for cdrom... Could not stat /dev/wcd0: No such file or directory Checking /dev/wcd1 for cdrom... Could not stat /dev/wcd1: No such file or directory Checking /dev/wcd2 for cdrom... Could not stat /dev/wcd2: No such file or directory Checking /dev/wcd3 for cdrom... Could not stat /dev/wcd3: No such file or directory Checking /dev/mcd0 for cdrom... Could not stat /dev/mcd0: No such file or directory Checking /dev/mcd1 for cdrom... Could not stat /dev/mcd1: No such file or directory Checking /dev/mcd2 for cdrom... Could not stat /dev/mcd2: No such file or directory Checking /dev/mcd3 for cdrom... Could not stat /dev/mcd3: No such file or directory Checking /dev/cd0c for cdrom... CDROM model sensed: SONY CD-RW CRX175A1 5YS3 Checking for ATAPICAM... Drive is ATAPI (using ATAPICAM) Checking for MMC style command set... Drive is MMC style Setting default read size to 26 sectors (61152 bytes). Verifying CDDA command set... Expected command set reads OK. Table of contents (audio tracks only): tracklength begincopy pre ch === 1.17952 [03:59.27]0 [00:00.00]no no 2 2.17653 [03:55.28]17952 [03:59.27]no no 2 3.21082 [04:41.07]35605 [07:54.55]no no 2 4.20363 [04:31.38]56687 [12:35.62]no no 2 5.25660 [05:42.10]77050 [17:07.25]no no 2 6.19267 [04:16.67] 102710 [22:49.35]no no 2 7.19900 [04:25.25] 121977 [27:06.27]no no 2 8.17848 [03:57.73] 141877 [31:31.52]no no 2 9.20285 [04:30.35] 159725 [35:29.50]no no 2 10.26970 [05:59.45] 180010 [40:00.10]no no 2 11.20310 [04:30.60] 206980 [45:59.55]no no 2 TOTAL 227290 [50:30.40](audio only) ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: cdparanoia and atapicam question
Post your dmesg. * Robert Dormer ([EMAIL PROTECTED]) wrote: On Mon, 6 Dec 2004 09:22:50 -0500, Dev Tugnait [EMAIL PROTECTED] wrote: What is the output from cdparanoia -vsQ If you are trying to rip them to your harddis and cant figurecdparanoia use a frontend to it like grip. can't figure out what the problem would be, judging from this cdparanoia III release 9.8 (March 23, 2001) (C) 2001 Monty [EMAIL PROTECTED] and Xiphophorus FreeBSD porting (c) 2003 Simon 'corecode' Schubert [EMAIL PROTECTED] Report bugs to [EMAIL PROTECTED] http://www.xiph.org/paranoia/ Checking /dev/cd0 for cdrom... Could not stat /dev/cd0: No such file or directory Checking /dev/cd1 for cdrom... Could not stat /dev/cd1: No such file or directory Checking /dev/cd2 for cdrom... Could not stat /dev/cd2: No such file or directory Checking /dev/cd3 for cdrom... Could not stat /dev/cd3: No such file or directory Checking /dev/acd0 for cdrom... Could not stat /dev/acd0: No such file or directory Checking /dev/acd1 for cdrom... Could not stat /dev/acd1: No such file or directory Checking /dev/acd2 for cdrom... Could not stat /dev/acd2: No such file or directory Checking /dev/acd3 for cdrom... Could not stat /dev/acd3: No such file or directory Checking /dev/wcd0 for cdrom... Could not stat /dev/wcd0: No such file or directory Checking /dev/wcd1 for cdrom... Could not stat /dev/wcd1: No such file or directory Checking /dev/wcd2 for cdrom... Could not stat /dev/wcd2: No such file or directory Checking /dev/wcd3 for cdrom... Could not stat /dev/wcd3: No such file or directory Checking /dev/mcd0 for cdrom... Could not stat /dev/mcd0: No such file or directory Checking /dev/mcd1 for cdrom... Could not stat /dev/mcd1: No such file or directory Checking /dev/mcd2 for cdrom... Could not stat /dev/mcd2: No such file or directory Checking /dev/mcd3 for cdrom... Could not stat /dev/mcd3: No such file or directory Checking /dev/cd0c for cdrom... CDROM model sensed: SONY CD-RW CRX175A1 5YS3 Checking for ATAPICAM... Drive is ATAPI (using ATAPICAM) Checking for MMC style command set... Drive is MMC style Setting default read size to 26 sectors (61152 bytes). Verifying CDDA command set... Expected command set reads OK. Table of contents (audio tracks only): tracklength begincopy pre ch === 1.17952 [03:59.27]0 [00:00.00]no no 2 2.17653 [03:55.28]17952 [03:59.27]no no 2 3.21082 [04:41.07]35605 [07:54.55]no no 2 4.20363 [04:31.38]56687 [12:35.62]no no 2 5.25660 [05:42.10]77050 [17:07.25]no no 2 6.19267 [04:16.67] 102710 [22:49.35]no no 2 7.19900 [04:25.25] 121977 [27:06.27]no no 2 8.17848 [03:57.73] 141877 [31:31.52]no no 2 9.20285 [04:30.35] 159725 [35:29.50]no no 2 10.26970 [05:59.45] 180010 [40:00.10]no no 2 11.20310 [04:30.60] 206980 [45:59.55]no no 2 TOTAL 227290 [50:30.40](audio only) ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] +--==/\/\==--+ (__) FreeBSD | [EMAIL PROTECTED] |\\\'',) The |Kernel ESCAFLOWNE | \/ \ ^Power | Web http://unixdaemon.org | .\._/_)To +--==\/\/==--+ Serve [ We've switched the bath sponge with a tribble. ] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: cdparanoia and atapicam question
What is the output from cdparanoia -vsQ If you are trying to rip them to your harddis and cant figurecdparanoia use a frontend to it like grip. * Robert Dormer ([EMAIL PROTECTED]) wrote: Hello all, I'm trying to get some CDs of mine onto the hard drive, using cdparanoia. All of the relevant ATAPICAM options are in the kernel. However, when I fire it up, it just sits there and does nothing. Nothing meaning no recording, no timing out, nothing. It won't even respond to kill -9. I've also tried camcontrol with the test unit ready option, same response. Anyone know what's going on or what I'm missing? ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] +--==/\/\==--+ (__) FreeBSD | [EMAIL PROTECTED] |\\\'',) The |Kernel ESCAFLOWNE | \/ \ ^Power | Web http://unixdaemon.org | .\._/_)To +--==\/\/==--+ Serve [ We've switched the bath sponge with a tribble. ] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
cdparanoia and atapicam question
Hello all, I'm trying to get some CDs of mine onto the hard drive, using cdparanoia. All of the relevant ATAPICAM options are in the kernel. However, when I fire it up, it just sits there and does nothing. Nothing meaning no recording, no timing out, nothing. It won't even respond to kill -9. I've also tried camcontrol with the test unit ready option, same response. Anyone know what's going on or what I'm missing? ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]