Re: make problem after time change and upgrading

2005-12-06 Thread Aaron Sloan

Giorgos Keramidas wrote:

Aaron Sloan <[EMAIL PROTECTED]> writes:


I am having some problems after I rebuilt 5.4 from cvsup.
After I mergemastered I have a "make" problem.

This is the error I get when using make in /usr/src

slick# make
LC_ALL=C: Command not found.
"Makefile", line 155: warning: "LC_ALL=C date" returned non-zero status
MAKEFLAGS=: Command not found.
"Makefile.inc1", line 116: warning: "MAKEFLAGS= CPUTYPE=pentium4 make
-f /dev/null -m /usr/src/share/mk -V CPUTYPE" returned non-zero status
"Makefile.inc1", line 118: CPUTYPE global should be set with ?=.
*** Error code 1

slick.adtu.org 5.4-STABLE FreeBSD 5.4-STABLE #0: Wed Nov 23 22:26:28 UTC
2005 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC  i386

I have done reading on this but I'm not getting anywhere with positive
results.

Someone has some direction for me to search?



The problem doesn't seem to be date-related but an error message that is
included in what you pasted:

CPUTYPE global should be set with ?=.

Does your /etc/make.conf file set CPUTYPE unconditionally with something
like this:

CPUTYPE=pentium4

?




Here is my make.conf file after I adjusted the cuptype to i686.
I have a P4.

CPUTYPE?=i686
MAKE_SHELL?=csh
CFLAGS= -O -pipe
PERL_VER=5.8.7
#PERL_VERSION=5.8.7


#>make
LC_ALL=C: Command not found.
"Makefile", line 155: warning: "LC_ALL=C date" returned non-zero status
MAKEFLAGS=: Command not found.
"Makefile.inc1", line 116: warning: "MAKEFLAGS= CPUTYPE=pentiumpro make 
 -f /dev/null -m /usr/src/share/mk -V CPUTYPE" returned non-zero status

"Makefile.inc1", line 118: CPUTYPE global should be set with ?=.
*** Error code 1

Stop in /usr/src.


I'm a little confused...
Can someone give me a hint towards debugging the LC returned non-zero 
status.


Troubleshooting:

I went into bios and reset the time to local time, CST.  The clock was 
on UTC and was off by an hour, I think ahead.


date>
Tue Dec  6 11:37:56 CST 2005

seems correct.



What other information can I give you that would be helpful?


Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.4-STABLE #0: Wed Nov 23 22:26:28 UTC 2005
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC
ACPI APIC Table: 
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2430.01-MHz 686-class CPU)
MOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory  = 536805376 (511 MB)
avail memory = 515612672 (491 MB)
npx0: INT 16 interface
acpi0:  on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_throttle0:  on cpu0
acpi_button0:  on acpi0
pcib0:  port 0xcf8-0xcff on acpi0
pci0:  on pcib0
pcib1:  at device 1.0 on pci0
pci1:  on pcib1
pci1:  at device 0.0 (no driver attached)
uhci0:  port 0xd800-0xd81f 
irq 16 at

device 29.0 on pci0
usb0:  on uhci0
usb0: USB revision 1.0
device 29.1 on pci0
usb1:  on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
device 29.2 on pci0
usb2:  on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0:  at device 29.7 (no driver attached)
atapci0:  port 
0xb000-0xb00f,0xac00-0xac03,
0xa800-0xa807,0xa400-0xa403,0xa000-0xa007 mem 0xee00-0xee003fff irq 
18 at de

vice 2.0 on pci2
ata2: channel #0 on atapci0
ata3: channel #1 on atapci0
pcm0:  port 0xb400-0xb41f irq 19 at device 6.0 on pci2
pcm0: 
fxp0:  port 0xbc00-0xbc3f mem 
0xee0040

00-0xee004fff irq 20 at device 8.0 on pci2
miibus0:  on fxp0
fxp0: Ethernet address: 00:e0:81:50:17:27
isab0:  at device 31.0 on pci0
isa0:  on isab0
atapci1:  port 
0xf000-0xf00f,0x376,0x170-0x177,0x

3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0: channel #0 on atapci1
ata1: channel #1 on atapci1
pci0:  at device 31.3 (no driver attached)
acpi_tz0:  on acpi0
fdc0:  port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on 
acpi0

sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0:  port 0x778-0x77b,0x378-0x37f irq 
7 on acp

i0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0:  on ppc0
plip0:  on ppbus0
ppi0:  on ppbus0
atkbdc0:  port 0x64,0x60 irq 1 on acpi0
atkbd0:  irq 1 on atkbdc0
kbd0 at atkbd0
psm0:  irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0
orm0:  at iomem 0xd-0xd87ff,0xc-0xccfff on isa0
pmtimer0 on isa0
sc0:  at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0:  at port 0x3c0-0x3df iomem 0xa-0xb on isa0
umass0: SanDisk ImageMate 8 in 1, rev 2.00/91.39, addr 2
Timecounter "TSC" frequency 2430009808 Hz quality 800
Timecounters tick every 10.000 msec
ad0: 58644MB  [119150/16/63] at ata0-master UDMA100
ata1-slave: FAI

Re: make problem after time change and upgrading

2005-11-30 Thread Giorgos Keramidas
Aaron Sloan <[EMAIL PROTECTED]> writes:
> I am having some problems after I rebuilt 5.4 from cvsup.
> After I mergemastered I have a "make" problem.
>
> This is the error I get when using make in /usr/src
>
> slick# make
> LC_ALL=C: Command not found.
> "Makefile", line 155: warning: "LC_ALL=C date" returned non-zero status
> MAKEFLAGS=: Command not found.
> "Makefile.inc1", line 116: warning: "MAKEFLAGS= CPUTYPE=pentium4 make
> -f /dev/null -m /usr/src/share/mk -V CPUTYPE" returned non-zero status
> "Makefile.inc1", line 118: CPUTYPE global should be set with ?=.
> *** Error code 1
>
> slick.adtu.org 5.4-STABLE FreeBSD 5.4-STABLE #0: Wed Nov 23 22:26:28 UTC
> 2005 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC  i386
>
> I have done reading on this but I'm not getting anywhere with positive
> results.
>
> Someone has some direction for me to search?

The problem doesn't seem to be date-related but an error message that is
included in what you pasted:

CPUTYPE global should be set with ?=.

Does your /etc/make.conf file set CPUTYPE unconditionally with something
like this:

CPUTYPE=pentium4

?

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"


make problem after time change and upgrading

2005-11-30 Thread Aaron Sloan

I am having some problems after I rebuilt 5.4 from cvsup.
After I mergemastered I have a "make" problem.

This is the error I get when using make in /usr/src

slick# make
LC_ALL=C: Command not found.
"Makefile", line 155: warning: "LC_ALL=C date" returned non-zero status
MAKEFLAGS=: Command not found.
"Makefile.inc1", line 116: warning: "MAKEFLAGS= CPUTYPE=pentium4 make  
-f /dev/null -m /usr/src/share/mk -V CPUTYPE" returned non-zero status

"Makefile.inc1", line 118: CPUTYPE global should be set with ?=.
*** Error code 1

slick.adtu.org 5.4-STABLE FreeBSD 5.4-STABLE #0: Wed Nov 23 22:26:28 UTC 
2005 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC  i386



I have done reading on this but I'm not getting anywhere with positive 
results.


Someone has some direction for me to search?

Thanks,
Aaron


___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"