ppp connection goes down - requires reboot
Lately I have a problem where the ppp connection goes down. Watching the log I see the following; Jul 12 09:54:58 3s1 ppp[30841]: tun0: Phase: deflink: Connected! Jul 12 09:54:58 3s1 ppp[30841]: tun0: Phase: deflink: opening - dial Jul 12 09:54:58 3s1 ppp[30841]: tun0: Phase: deflink: dial - carrier Jul 12 09:55:12 3s1 ppp[31114]: Phase: Using interface: tun0 Jul 12 09:55:12 3s1 ppp[31114]: Phase: deflink: Created in closed state Jul 12 09:55:12 3s1 ppp[31114]: tun0: Command: default: disable ipv6cp Jul 12 09:55:12 3s1 ppp[31114]: tun0: Command: default: set dial Jul 12 09:55:12 3s1 ppp[31114]: tun0: Command: default: set login Jul 12 09:55:12 3s1 ppp[31114]: tun0: Command: default: set ifaddr 209.161.205.12 206.221.248.4 Jul 12 09:55:12 3s1 ppp[31114]: tun0: Command: default: set ifaddr 10.0.0.1/0 10.0.0.2/0 Jul 12 09:55:12 3s1 ppp[31114]: tun0: Command: default: add default HISADDR Jul 12 09:55:12 3s1 ppp[31114]: tun0: Command: default: nat enable yes Jul 12 09:55:12 3s1 ppp[31114]: tun0: Command: default: set device PPPoE:fxp0 Jul 12 09:55:12 3s1 ppp[31114]: tun0: Command: default: set mru 1492 Jul 12 09:55:12 3s1 ppp[31114]: tun0: Command: default: set mtu 1492 Jul 12 09:55:12 3s1 ppp[31114]: tun0: Command: default: set authname [login was here] Jul 12 09:55:12 3s1 ppp[31114]: tun0: Command: default: set authkey Jul 12 09:55:12 3s1 ppp[31114]: tun0: Command: default: set log Phase tun command Jul 12 09:55:12 3s1 ppp[31114]: tun0: Command: default: disable ipv6cp Jul 12 09:55:12 3s1 ppp[31114]: tun0: Command: default: set dial Jul 12 09:55:12 3s1 ppp[31114]: tun0: Command: default: set login Jul 12 09:55:12 3s1 ppp[31114]: tun0: Command: default: set ifaddr 209.161.205.12 206.221.248.4 Jul 12 09:55:12 3s1 ppp[31114]: tun0: Command: default: set ifaddr 10.0.0.1/0 10.0.0.2/0 Jul 12 09:55:12 3s1 ppp[31114]: tun0: Command: default: add default HISADDR Jul 12 09:55:12 3s1 ppp[31114]: tun0: Command: default: nat enable yes Jul 12 09:55:12 3s1 ppp[31115]: tun0: Phase: PPP Started (ddial mode). Jul 12 09:55:12 3s1 ppp[31115]: tun0: Phase: bundle: Establish Jul 12 09:55:12 3s1 ppp[31115]: tun0: Phase: deflink: closed - opening Jul 12 09:55:13 3s1 ppp[31115]: tun0: Phase: deflink: Connected! Jul 12 09:55:13 3s1 ppp[31115]: tun0: Phase: deflink: opening - dial Jul 12 09:55:13 3s1 ppp[31115]: tun0: Phase: deflink: dial - carrier Jul 12 09:55:18 3s1 ppp[31115]: tun0: Phase: deflink: Disconnected! Jul 12 09:55:18 3s1 ppp[31115]: tun0: Phase: deflink: carrier - hangup Jul 12 09:55:18 3s1 ppp[31115]: tun0: Phase: deflink: Connect time: 5 secs: 0 octets in, 0 octets out Jul 12 09:55:18 3s1 ppp[31115]: tun0: Phase: deflink: 0 packets in, 0 packets out Jul 12 09:55:18 3s1 ppp[31115]: tun0: Phase: total 0 bytes/sec, peak 0 bytes/sec on Thu Jul 12 09:55:13 2012 Jul 12 09:55:18 3s1 ppp[31115]: tun0: Phase: deflink: hangup - opening Jul 12 09:55:18 3s1 ppp[31115]: tun0: Phase: deflink: Enter pause (30) for redialing. I shutdown ppp and restart it with no luck. I shutoff modem and reboot it and wait for connection light to go solid - still no go. I called ISP and they say there is no problem. I try to login to the ISP with a windows box and am successful. Having no luck connecting with my server, I reboot, and all is fine. What could it be about rebooting the server that allows connection where otherwise it is not possible? Any ideas where I can look for answers? my ppp.conf follows; default: # or name_of_service_provider set device PPPoE:fxp0 # replace xl1 with your ethernet device set mru 1492 set mtu 1492 set authname *** set authkey *** set log Phase tun command # you can add more detailed logging if you wish disable ipv6cp set dial set login set ifaddr 209.161.205.12 206.221.248.4 set ifaddr 10.0.0.1/0 10.0.0.2/0 add default HISADDR nat enable yes ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: ppp connection goes down - requires reboot
On 7/12/2012 10:18 AM, David Banning wrote: Lately I have a problem where the ppp connection goes down. Watching the log I see the following; Jul 12 09:55:13 3s1 ppp[31115]: tun0: Phase: deflink: opening - dial Jul 12 09:55:13 3s1 ppp[31115]: tun0: Phase: deflink: dial - carrier Jul 12 09:55:18 3s1 ppp[31115]: tun0: Phase: deflink: Disconnected! Jul 12 09:55:18 3s1 ppp[31115]: tun0: Phase: deflink: carrier - hangup Jul 12 09:55:18 3s1 ppp[31115]: tun0: Phase: deflink: Connect time: 5 secs: 0 octets in, 0 octets out 5 seconds seems like a pretty tight for it to give up. Do you have any other defaults in your ppp.conf not shown below ? also add enable echo disable vjcomp set lqrperiod 10 set cd 10 and when its not working, try tcpdump -nei fxp0 You should see responses to your PADI requests from the remote BAS. Also get rid of the 209.161.205.12 line. Typically your ISP will assign you the static IP out of RADIUS and you dont need to specify it. ---Mike I shutdown ppp and restart it with no luck. I shutoff modem and reboot it and wait for connection light to go solid - still no go. my ppp.conf follows; default: # or name_of_service_provider set device PPPoE:fxp0 # replace xl1 with your ethernet device set mru 1492 set mtu 1492 set authname *** set authkey *** set log Phase tun command # you can add more detailed logging if you wish disable ipv6cp set dial set login set ifaddr 209.161.205.12 206.221.248.4 set ifaddr 10.0.0.1/0 10.0.0.2/0 add default HISADDR nat enable yes ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org -- --- Mike Tancsa, tel +1 519 651 3400 Sentex Communications, m...@sentex.net Providing Internet services since 1994 www.sentex.net Cambridge, Ontario Canada http://www.tancsa.com/ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
How to configure ppp connection
Hello! (First of all - forgive me my language, I'am form Poland) I'am new in FreeBSD, but I have used Linux for a few year. I have got mobile modem: Huawei e1750c. As far as I know it is supported by u3g driver. On Linux I use wvdial as a dialer, and there are no problems with connection. On FreeBSD I just can't find propper ppp.conf, however I spend many hours googling and trying some. --- There are data needed to establish connection: ASP: internet user: password: phone: *99# --- my wvdial (Linux) config file: Modem = /dev/ttyUSB0 Baud = 57600 Init1 = ATH Init2 = ATE1 Init3 = AT+CGDCONT=1,IP,internet Dial Command = ATD Phone = *99# Stupid mode = yes Username = blank Password = blank Auto DNS = yes --- There is one of ppp.conf I tried: default: set log Phase Chat LCP IPCP CCP tun command ident user-ppp VERSION (built COMPILATIONDATE) set device /dev/cuaU0.0 set speed 115200 set dial ABORT BUSY TIMEOUT 2 \ \\ \ AT OK-AT-OK \ AT+CFUN=1 OK-AT-OK \ AT+CMEE=2 OK-AT-OK \ AT+CSQ OK \ AT+CGDCONT=1,\\\IP\\\,\\\internet\\\ OK \ AT+CGACT? OK-AT-OK \ AT+CGATT? OK \ AT+CGCLASS? OK \ AT+COPS? OK \ ATD*99# CONNECT set timeout 180 enable dns set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0 add default HISADDR --- After i plug modem i got: ugen4.2: HUAWEI Technology at usbus4 ugen4.2: HUAWEI Technology at usbus4 (disconnected) ugen4.2: HUAWEI Technology at usbus4 [b]u3g0: HUAWEI Technology HUAWEI Mobile, class 0/0, rev 2.00/0.00, addr 2 on usbus4 u3g0: Found 3 ports.[/b] umass0: HUAWEI Technology HUAWEI Mobile, class 0/0, rev 2.00/0.00, addr 2 on usbus4 umass0: SCSI over Bulk-Only; quirks = 0x umass0:0:0:-1: Attached to scbus0 umass1: HUAWEI Technology HUAWEI Mobile, class 0/0, rev 2.00/0.00, addr 2 on usbus4 umass1: SCSI over Bulk-Only; quirks = 0x (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error (probe0:umass-sim0:0:0:0): SCSI status: Check Condition (probe0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present) cd0 at umass-sim0 bus 0 scbus0 target 0 lun 0 cd0: HUAWEI Mass Storage 2.31 Removable CD-ROM SCSI-2 device cd0: 40.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present umass1:1:1:-1: Attached to scbus1 (probe0:umass-sim1:1:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:umass-sim1:1:0:0): CAM status: SCSI Status Error (probe0:umass-sim1:1:0:0): SCSI status: Check Condition (probe0:umass-sim1:1:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present) da0 at umass-sim1 bus 1 scbus1 target 0 lun 0 da0: HUAWEI SD Storage 2.31 Removable Direct Access SCSI-2 device da0: 40.000MB/s transfers da0: Attempt to query device size failed: NOT READY, Medium not present --- when i try to use ppp default and then dial i got: # ppp default Loading /lib/libalias_cuseeme.so Loading /lib/libalias_ftp.so Loading /lib/libalias_irc.so Loading /lib/libalias_nbt.so Loading /lib/libalias_pptp.so Loading /lib/libalias_skinny.so Loading /lib/libalias_smedia.so Working in interactive mode Using interface: tun0 Warning: Bad label in /etc/ppp/ppp.conf (line 2) - missing colon Warning: Bad label in /etc/ppp/ppp.conf (line 2) - missing colon ppp ON localhost dial Warning: deflink: /dev/cuad1: Bad file descriptor Warning: deflink: /dev/cuad0: Bad file descriptor --- Nothing happens, there is still no connection. Some device nodes are created after I plug a modem. There is diff result of listed /dev pre and post pluging: ja...@iac-deb:~$ diff /media/disk/pre_dev /media/disk/post_dev 17a18 cd0 20a22,30 cuaU0.0 cuaU0.0.init cuaU0.0.lock cuaU0.1 cuaU0.1.init cuaU0.1.lock cuaU0.2 cuaU0.2.init cuaU0.2.lock 23a34 da0 43a55,56 pass0 pass1 51a65,73 ttyU0.0 ttyU0.0.init ttyU0.0.lock ttyU0.1 ttyU0.1.init ttyU0.1.lock ttyU0.2 ttyU0.2.init ttyU0.2.lock 77a100 ugen4.2 --- I would be very gratefull if You could help me to configure ppp.conf. FreeBSD without internt connection is useless for me... :( Thanks, Jakub Nowacki. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: How to configure ppp connection
On Mon, 23 Aug 2010 20:05:32 +0200, Jakub Nowacki poczta.jnowa...@gmail.com wrote: Hello! (First of all - forgive me my language, I'am form Poland) Dobre. :-) I'am new in FreeBSD, but I have used Linux for a few year. As a first note, know that FreeBSD has *excellent* manpages. Know the apropos and man commands, as they will always help you. I have got mobile modem: Huawei e1750c. As far as I know it is supported by u3g driver. On Linux I use wvdial as a dialer, and there are no problems with connection. On FreeBSD I just can't find propper ppp.conf, however I spend many hours googling and trying some. You don't need google as a means of OS documentation. :-) First, check /etc/ppp/ppp.conf which is the PPP configuration file. Also, read man ppp. I have used ppp.conf in the past for dealing with PPPoE, and it worked without any problems. when i try to use ppp default and then dial i got: You should define your own label for the connection in ppp.conf, e. g. the name of the provider (doesn't have to be very verbose). # ppp default Warning: Bad label in /etc/ppp/ppp.conf (line 2) - missing colon Warning: Bad label in /etc/ppp/ppp.conf (line 2) - missing colon Check those. ppp ON localhost dial Warning: deflink: /dev/cuad1: Bad file descriptor Warning: deflink: /dev/cuad0: Bad file descriptor PPP tries to access regular serial lines. Nothing happens, there is still no connection. Sorry, I don't know enough about wireless network to be more specific, but allow me this guess: If your connection requires PPPoE, you could code something like this: blah: set device PPPoE:device set authname accountname set authkey password set dial set login add default HISADDR Then, ppp blah would be used for manual dialing. I'm not sure in how far you are required to code AT dialing sequences. Some device nodes are created after I plug a modem. There is diff result of listed /dev pre and post pluging: ja...@iac-deb:~$ diff /media/disk/pre_dev /media/disk/post_dev 17a18 cd0 20a22,30 cuaU0.0 cuaU0.0.init cuaU0.0.lock cuaU0.1 cuaU0.1.init cuaU0.1.lock cuaU0.2 cuaU0.2.init cuaU0.2.lock 23a34 da0 43a55,56 pass0 pass1 51a65,73 ttyU0.0 ttyU0.0.init ttyU0.0.lock ttyU0.1 ttyU0.1.init ttyU0.1.lock ttyU0.2 ttyU0.2.init ttyU0.2.lock 77a100 ugen4.2 --- I would be very gratefull if You could help me to configure ppp.conf. The ttyU* and cuaU* devices obviously belong to the modem. -- Polytropon Magdeburg, Germany Happy FreeBSD user since 4.0 Andra moi ennepe, Mousa, ... ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: How to configure ppp connection
Dnia poniedziałek, 23 sierpnia 2010 o 21:03:32 Polytropon napisał(a): ppp ON localhost dial Warning: deflink: /dev/cuad1: Bad file descriptor Warning: deflink: /dev/cuad0: Bad file descriptor PPP tries to access regular serial lines. Nothing happens, there is still no connection. Sorry, I don't know enough about wireless network to be more specific, but allow me this guess: If your connection requires PPPoE, you could code something like this: blah: set device PPPoE:device set authname accountname set authkey password set dial set login add default HISADDR Then, ppp blah would be used for manual dialing. I'm not sure in how far you are required to code AT dialing sequences. It's broadband, mobile (celluar?) connection via Play (www.playmobile.pl) ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Normal CPU usage with a PPP connection
On Sunday 24 February 2008 14:34:37 Dylan Smith wrote: Hey guys, i'm running 6.3-R with (i think) userland ppp to connect to my ADSL provider over PPPoE. I build a number of graphs(mrtg) for system stats and i am noticing that under heavy load on my ppp connection, that is sustained 150KB/s for an hour or so my cpu usage, based on my graph, hovers around 20% (haven't looked at it in top yet but if there isn't a simple solution/reason for this i will look into what sort of usage it is). You should check top and tcpdump, it might be a big number of small packets causing the load. The box is a home router/server so at any 1 time isn't doing anything else that i can see would account for this. I also noticed that this usage increase does not occur with traffic coming/going on the inward facing interface, which regularly has transfer speeds around 10 MB/s. I'm running a AMD X2 3800+ with 2GB ram. Is this sort of usage normal? Can't really tell if it's normal, but it is known that userland ppp uses much resources. I have seen it too using 20% CPU time running on a much slower machine(I faintly remember that it was a Pentium Celeron at 300MHz) and a much slower(384/128?) ADSL line. Is there something i can do to bring it down? Fortunately yes, you could use net/mpd. The CPU load then, will probably be near zero for normal traffic, the 150KB/s you mention. If a million of small packets arrive at your router the load will be higher, nevertheless orders of magnitude lower than the load caused by userland ppp. HTH, Nikos ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
RE: Normal CPU usage with a PPP connection
-Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Nikos Vassiliadis Sent: Tuesday, February 26, 2008 1:49 AM To: freebsd-questions@freebsd.org Cc: Dylan Smith Subject: Re: Normal CPU usage with a PPP connection On Sunday 24 February 2008 14:34:37 Dylan Smith wrote: Hey guys, i'm running 6.3-R with (i think) userland ppp to connect to my ADSL provider over PPPoE. I build a number of graphs(mrtg) for system stats and i am noticing that under heavy load on my ppp connection, that is sustained 150KB/s for an hour or so my cpu usage, based on my graph, hovers around 20% (haven't looked at it in top yet but if there isn't a simple solution/reason for this i will look into what sort of usage it is). You should check top and tcpdump, it might be a big number of small packets causing the load. The box is a home router/server so at any 1 time isn't doing anything else that i can see would account for this. I also noticed that this usage increase does not occur with traffic coming/going on the inward facing interface, which regularly has transfer speeds around 10 MB/s. I'm running a AMD X2 3800+ with 2GB ram. Is this sort of usage normal? Can't really tell if it's normal, but it is known that userland ppp uses much resources. I have seen it too using 20% CPU time running on a much slower machine(I faintly remember that it was a Pentium Celeron at 300MHz) and a much slower(384/128?) ADSL line. Is there something i can do to bring it down? Fortunately yes, you could use net/mpd. The CPU load then, will probably be near zero for normal traffic, the 150KB/s you mention. If a million of small packets arrive at your router the load will be higher, nevertheless orders of magnitude lower than the load caused by userland ppp. Or, you can ignore it? You still have 80% of the CPU doing nothing Ted ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Normal CPU usage with a PPP connection
Hey guys, i'm running 6.3-R with (i think) userland ppp to connect to my ADSL provider over PPPoE. I build a number of graphs(mrtg) for system stats and i am noticing that under heavy load on my ppp connection, that is sustained 150KB/s for an hour or so my cpu usage, based on my graph, hovers around 20% (haven't looked at it in top yet but if there isn't a simple solution/reason for this i will look into what sort of usage it is). The box is a home router/server so at any 1 time isn't doing anything else that i can see would account for this. I also noticed that this usage increase does not occur with traffic coming/going on the inward facing interface, which regularly has transfer speeds around 10 MB/s. I'm running a AMD X2 3800+ with 2GB ram. Is this sort of usage normal? Is there something i can do to bring it down? Dylan ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Running scripts after ppp connection
Hey all, I was wondering if there was any way for ppp to run scripts after connections are built or torn down. I have things like a dynamic dns updater script and a vpn script that needs to run once the external ip changes on me. Thanks Adam Clark Network Administrator National Gallery of Victoria PO Box 7259 Melbourne Vic 8004 Telephone: +61 3 8620 2369 Fax: +61 3 8620 2565 www.ngv.vic.gov.au Keep informed of the latest NGV exhibitions, special events and programs at The Ian Potter Centre: NGV Australia and NGV International by subscribing to [EMAIL PROTECTED], the NGV's free e-newsletter. DISCLAIMER: This email and any files transmitted with it are confidential and intended solely for [EMAIL PROTECTED] If you are not the named addressee you should not disseminate, copy or alter this email. WARNING: Although National Gallery of Victoria has taken reasonable precautions to ensure no viruses are present in this email, the organisation cannot accept responsibility for any loss or damage arising from the use of this email or attachment. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Running scripts after ppp connection
Adam Clark [EMAIL PROTECTED] writes: I was wondering if there was any way for ppp to run scripts after connections are built or torn down. According to man ppp, that's what /etc/ppp/ppp.linkup is for. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: PPP Connection.
On Fri, Feb 25, 2005 at 12:11:34PM -0500, Peterhin wrote:
I have 5.3 installed, and am trying to get my dial-up going.
In the handbook under 21.2.1.2 when I try to do a
'cd /dev'
'sh MAKEDEV tun0'
I get can't open makedev: No such file or directory
The 5.x series uses a devfs filesystem which creates devices on the
fly. You don't have to make the devices manually anymore.
I also tried using G. Lehey instructions from his book, I get to the
point where the external modem dials at reboot, but no connection. I
have looked in the log files and it looks like Authentication failure
is my problem.
Username and password is incorrect? Post us the actual contents of the
logs and your ppp.conf (with the username/password blanked out) and we
will have a better idea just what is going wrong with your system.
--
Jonathan Chen [EMAIL PROTECTED]
--
char *p=char *p=%c%s%c;main(){printf(p,34,p,34);};main(){printf(p,34,p,34);}
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
RE: PPP Connection.
-Original Message- From: Jonathan Chen [mailto:[EMAIL PROTECTED] Sent: Friday, February 25, 2005 11:09 AM To: Peterhin Cc: freebsd-questions@freebsd.org Subject: Re: PPP Connection. On Fri, Feb 25, 2005 at 12:11:34PM -0500, Peterhin wrote: I have 5.3 installed, and am trying to get my dial-up going. In the handbook under 21.2.1.2 when I try to do a 'cd /dev' 'sh MAKEDEV tun0' I get can't open makedev: No such file or directory The 5.x series uses a devfs filesystem which creates devices on the fly. You don't have to make the devices manually anymore. I also tried using G. Lehey instructions from his book, I get to the point where the external modem dials at reboot, but no connection. I have looked in the log files and it looks like Authentication failure is my problem. Username and password is incorrect? Post us the actual contents of the logs and your ppp.conf (with the username/password blanked out) and we will have a better idea just what is going wrong with your system. -- Note, if you have special characters in the username or password you need o escape them i.e., [EMAIL PROTECTED] would be [EMAIL PROTECTED] However, this is not always the case depending on the isp. Good luck. dave ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: PPP Connection.
On February 25, 2005 14:09, you wrote: On Fri, Feb 25, 2005 at 12:11:34PM -0500, Peterhin wrote: I have 5.3 installed, and am trying to get my dial-up going. In the handbook under 21.2.1.2 when I try to do a 'cd /dev' 'sh MAKEDEV tun0' I get can't open makedev: No such file or directory The 5.x series uses a devfs filesystem which creates devices on the fly. You don't have to make the devices manually anymore. I also tried using G. Lehey instructions from his book, I get to the point where the external modem dials at reboot, but no connection. I have looked in the log files and it looks like Authentication failure is my problem. OK, finger trouble on my part I have a connection now. Username and password is incorrect? Post us the actual contents of the logs and your ppp.conf (with the username/password blanked out) and we will have a better idea just what is going wrong with your system. I have a good connection however if I try to disconnect by typing at the 'PPP ON localhost' close 'PPP ON Localhost or use the 'q' I get back to the # however the modem has not disconnected. I did a 'ping' to confirm on (ttyv1) -- Peter Civil Liberties are at the whim of those in power ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: PPP Connection.
On Friday 25 February 2005 02:12 pm, Peterhin wrote:
On February 25, 2005 14:09, you wrote:
On Fri, Feb 25, 2005 at 12:11:34PM -0500, Peterhin wrote:
I have 5.3 installed, and am trying to get my dial-up going.
In the handbook under 21.2.1.2 when I try to do a
'cd /dev'
'sh MAKEDEV tun0'
I get can't open makedev: No such file or directory
The 5.x series uses a devfs filesystem which creates devices on the
fly. You don't have to make the devices manually anymore.
I also tried using G. Lehey instructions from his book, I get to
the point where the external modem dials at reboot, but no
connection. I have looked in the log files and it looks like
Authentication failure is my problem.
OK, finger trouble on my part I have a connection now.
Username and password is incorrect? Post us the actual contents of
the logs and your ppp.conf (with the username/password blanked out)
and we will have a better idea just what is going wrong with your
system.
I have a good connection however if I try to disconnect by typing
at the 'PPP ON localhost' close
'PPP ON Localhost
or use the 'q'
I get back to the #
however the modem has not disconnected. I did a 'ping' to confirm on
(ttyv1)
Is ppp still active in the background? What does 'ps ax | grep ppp'
return?
I used to kill ppp using a hangup python script:
#!/usr/local/bin/python
# /usr/local/bin/hangup.py
import os, string, sys
a = 'ps ax | grep ppp'
b = os.popen(a).readlines()
c = b[0]
d = string.split(c)
os.popen('kill ' + d[0])
Best regards,
Andrew Gould
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
PPP Connection.
OK here is what I get when I 'ps ax | grep ppp' '202 ?? ls 0:00.04 /usr/sbin/ppp -quiet -auto -nat papchap' FYI. the modem does disconnect after the '300sec'. and I can re-dial to get the connection again, so that all works fine. Also I think what is happening is that on boot-up once it gets to 'looking for host time.nrc.ca and service NTP' the modem starts, so that explains why it starts at boot-up, it needs to satisfy that call. Part of this stp learning curve for a newbie like me is also learning the logic behind the sequencing of different activities. Now having said that, a further question, and I have read the man pages, handbook, and sundry other books, is I can't seem to understand how I can setup 'ppp' to dial out manually. (ie. only when I want it to, as I have another computer that shares the one phone line that I have avail. for this purpose). If you could shed some light on this function I would be very appreciative. As for your suggestion: 'I used to kill ppp using a hangup python script:' At this stage that is over my head. Peter Civil Liberties are at the whim of those in power ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: PPP Connection.
On Friday 25 February 2005 03:47 pm, Peterhin wrote: OK here is what I get when I 'ps ax | grep ppp' '202 ?? ls 0:00.04 /usr/sbin/ppp -quiet -auto -nat papchap' FYI. the modem does disconnect after the '300sec'. and I can re-dial to get the connection again, so that all works fine. Also I think what is happening is that on boot-up once it gets to 'looking for host time.nrc.ca and service NTP' the modem starts, so that explains why it starts at boot-up, it needs to satisfy that call. Part of this stp learning curve for a newbie like me is also learning the logic behind the sequencing of different activities. Now having said that, a further question, and I have read the man pages, handbook, and sundry other books, is I can't seem to understand how I can setup 'ppp' to dial out manually. (ie. only when I want it to, as I have another computer that shares the one phone line that I have avail. for this purpose). If you could shed some light on this function I would be very appreciative. If you have 2 computers needing to dial-out, you might consider sharing the ppp connection. The online handbook covers this at: http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/userppp.html As for your suggestion: 'I used to kill ppp using a hangup python script:' At this stage that is over my head. Peter Civil Liberties are at the whim of those in power ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Can't reach to a FreeBSD 5.3 machine trough a ppp connection
Hi! I'm installing a machine that will be a firewall and a samba server for a 4 people office. The machine has 2 NICs and is connecting to the Internet using PPPoE. It is using pf and ALTQ. Initially there was problems to establish the PPPoE connection in the office, using the same ppp.conf that previously worked in my lab (only changing the username/passwd). Here is my ppp.conf file: server:~ $ sudo cat /etc/ppp/ppp.conf default: set log Phase Chat LCP IPCP CCP tun command set device PPPoE:fxp0 set mtu 1492 set mru 1492 enable mssfixup set speed sync disable acfcomp protocomp deny acfcomp set authname x set authkeyx add default HISADDR enable lqr set lqrperiod 25 enable dns I got some messages in ppp.log like this one, Nov 23 15:00:35 server ppp[533]: tun0: LCP: deflink: -- Protocol 0x8057 (Internet Protocol V6 Control Pro tocol) was rejected! Nov 23 15:00:41 server ppp[533]: tun0: Phase: deflink: IPV6CP protocol reject closes IPV6CP ! After that added disable ipv6cp, and commented out enable lqr and set lqrperiod 25 and the connection didn't drop anymore. It seems that this provider doesn't support lqr. It appeared that everything was working fine, but when I tried to use ssh to login to this box from outside was not possible. After some time of issuing the ssh command, get the following error: ssh: connect to host dsuaya.ath.cx port 22: Operation timed out. After some tests, I discovered that changing router_enable to YES in the /etc/rc.conf solved the problem. But in the section 21.2.1.5 Final System Configuration of the FreeBSD handbook states: Make sure the router program set to NO with following line in your /etc/rc.conf: router_enable=NO It is important that the routed daemon is not started (it is by default), as routed tends to delete the default routing table entries created by ppp. So, is there another manner to resolve this? Note that I'm always able to establish connections from this box to a host in the Internet but I can't establish a connection from that hosts to this one if router_enable=NO. Thanks in advance, Mauricio. Some data of interest: server:~ $ uname -a FreeBSD server.estudio 5.3-RELEASE-p1 FreeBSD 5.3-RELEASE-p1 #1: Tue Nov 23 02:13:24 ART 2004 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERICWALTQ i386 server:~ $ server:~ $ cat /etc/rc.conf # -- sysinstall generated deltas -- # Sun Nov 21 13:07:41 2004 # Created: Sun Nov 21 13:07:41 2004 # Enable network daemons for user convenience. # Please make all changes to this file, not to /etc/defaults/rc.conf. # This file now contains just the overrides from /etc/defaults/rc.conf. # hostname=server.estudio ifconfig_rl0=inet 192.168.2.1 netmask 255.255.255.0 netd_enable=YES saver=dragon scrnmap=NO sshd_enable=YES sshd_flags=-4 -p 22 usbd_enable=YES network_interfaces=lo0 tun0 rl0 fconfig_tun0= router_enable=YES# remember to disable this! #router_enable=NO # Set to YES to enable a routing daemon. router=/sbin/routed # Name of routing daemon to use if enabled. router_flags=-q # Flags for routing daemon. gateway_enable=YES # Set to YES if this host will be a gateway pf_enable=YES # Enable PF (load module if required) pf_rules=/etc/pf.conf # rules definition file for pf pf_flags= # additional flags for pfctl startup #pflog_enable=YES # start pflogd(8) #pflog_logfile=/var/log/pflog # where pflogd should store the logfile #pflog_flags= # additional flags for pflogd startup inetd_enable=YES # Run the network daemon dispatcher (YES/NO). inetd_program=/usr/sbin/inetd # path to inetd, if you want a different one. inetd_flags=-wW -C 60 # Optional flags to inetd server:~ $ server:~ $ cat /etc/start_if.tun0 ppp -ddial default; /usr/local/etc/ez-ipupdate.conf ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Monitoring a PPP Connection
I have a device that connects via PPP on a phone line (V.90) to my ISP. However, I am seeing significant delays on the connection but can't find a cause. I am looking for something that will monitor the phone line - like tcpdump for a phone line. I know that there are some expensive devices out there that do that, but this doesn't warrant spending that much. I don't see any easy way to capture both the uplink and downlink signals though. Regular modems only monitor the downlink side. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
setting up a second ppp connection
Sometimes my pppoe connection goes down, and since I want to find out about it right away, I was thinking it would be helpful to have my freebsd box connect to the net via a dialup line, and then email my cell phone that the connection is down. I don 't want to disable the pppoe connection which is still attempting to connect. Any idea if something like this is possible? -- ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
SOLVED: user PPP connection problems.
Thanks to Heiko, Rex, David and Mark, I got my internet connection working. Problem was, I didn't know which port the modem was connected to. I tried /dev/cuaa0 it worked. Thanks guys Sincerely Keshav Want to chat instantly with your online friends? Get the FREE Yahoo! Messenger http://mail.messenger.yahoo.co.uk ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: User PPP connection problems
On Tue, Sep 09, 2003 at 04:03:33AM +0100, Tadimeti Keshav wrote: Hi all, I a newbie here. I compiled the kernel with COM3 and COM4 enabled. I tried connecting to the internet but failed. I am pasting the relavant portion of /var/ppp/ppp.log. Please help!! Thanks in advance Keshav I agree with Mark. It looks like your box is not seeing the modem. You could try cu -l cuaa0 for com1, cuaa0 for com2. Then you can try some hayes command from the prompt. Try ATZ (reset). AT to check OK response. Then try ATDT12345678 for dialing (the 12345678 is to be replaced with a phone number.) Once you have the right port and you are talking to your modem, then we can look at the ppp.log again. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: User PPP connection problems
Try ATZ (reset). AT to check OK response. Then try ATDT12345678 for dialing (the 12345678 is to be replaced with a phone number.) Once you have the right port and you are talking to your modem, then we can look at the ppp.log again. There once was a sample in /etc/ppp, it has moved, the Gods have decided, somewhere to /usr/share/examples (IMHO) H. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
User PPP connection problems
Hi all, I a newbie here. I compiled the kernel with COM3 and COM4 enabled. I tried connecting to the internet but failed. I am pasting the relavant portion of /var/ppp/ppp.log. Please help!! Thanks in advance Keshav Sep 8 22:25:12 ppp[220]: Phase: Using interface: tun0 Sep 8 22:25:12 ppp[220]: Phase: deflink: Created in closed state Sep 8 22:25:12 ppp[220]: tun0: Command: default: ident user-ppp VERSION (built COMPILATIONDATE) Sep 8 22:25:12 ppp[220]: tun0: Command: default: set device /dev/cuaa1 Sep 8 22:25:12 ppp[220]: tun0: Command: default: set speed 57600 Sep 8 22:25:12 ppp[220]: tun0: Command: default: set dial ABORT BUSY ABORT NO\sCARRIER TIMEOUT 5 AT OK-AT-OK ATE1Q0 OK \dATDT\T TIMEOUT 40 CONNECT Sep 8 22:25:12 ppp[220]: tun0: Command: default: set timeout 180 Sep 8 22:25:12 ppp[220]: tun0: Command: default: enable dns Sep 8 22:25:12 ppp[220]: tun0: Command: papchap: set phone 5571090 Sep 8 22:25:12 ppp[220]: tun0: Command: papchap: set authname dtitg Sep 8 22:25:12 ppp[220]: tun0: Command: papchap: set authkey Sep 8 22:25:12 ppp[220]: tun0: Command: papchap: set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0 Sep 8 22:25:12 ppp[220]: tun0: Command: papchap: add default HISADDR Sep 8 22:25:12 ppp[221]: tun0: Phase: PPP Started (background mode). Sep 8 22:25:12 ppp[221]: tun0: Phase: bundle: Establish Sep 8 22:25:12 ppp[221]: tun0: Phase: deflink: closed - opening Sep 8 22:25:12 ppp[221]: tun0: Phase: deflink: Connected! Sep 8 22:25:12 ppp[221]: tun0: Phase: deflink: opening - dial Sep 8 22:25:12 ppp[221]: tun0: Chat: Phone: 5571090 Sep 8 22:25:12 ppp[221]: tun0: Chat: deflink: Dial attempt 1 of 1 Sep 8 22:25:12 ppp[221]: tun0: Chat: Send: AT^M Sep 8 22:25:12 ppp[221]: tun0: Chat: Expect(5): OK Sep 8 22:25:17 ppp[221]: tun0: Chat: Expect timeout Sep 8 22:25:17 ppp[221]: tun0: Chat: Send: AT^M Sep 8 22:25:17 ppp[221]: tun0: Chat: Expect(5): OK Sep 8 22:25:22 ppp[221]: tun0: Chat: Expect timeout Sep 8 22:25:22 ppp[221]: tun0: Warning: Chat script failed Sep 8 22:25:22 ppp[221]: tun0: Phase: deflink: dial - hangup Sep 8 22:25:22 ppp[221]: tun0: Phase: deflink: Disconnected! Sep 8 22:25:22 ppp[221]: tun0: Phase: deflink: Connect time: 10 secs: 0 octets in, 0 octets out Sep 8 22:25:22 ppp[221]: tun0: Phase: deflink: : 0 packets in, 0 packets out Sep 8 22:25:22 ppp[221]: tun0: Phase: total 0 bytes/sec, peak 0 bytes/sec on Mon Sep 8 22:25:22 2003 Sep 8 22:25:22 ppp[221]: tun0: Phase: deflink: hangup - closed Sep 8 22:25:22 ppp[221]: tun0: Phase: bundle: Dead Sep 8 22:25:22 ppp[221]: tun0: Phase: PPP Terminated (normal). Sep 8 22:25:22 ppp[221]: tun0: Chat: Parent notified of failure Sep 8 22:25:22 ppp[220]: tun0: Phase: Parent: Child failed (errdead) Want to chat instantly with your online friends? Get the FREE Yahoo! Messenger http://mail.messenger.yahoo.co.uk ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
User PPP connection problems
Hello, I am also a newbie to FreeBSD, and have also had problems connecting to an ISP. While I can actually make the connection, I cannot yet complete a logon successfully ;(. But I may have some insight as to your problem. Having looked at your ppp.log, it appears that your system is never actually dialing the number to connect. These lines explain it: Sep 8 22:25:12 ppp[221]: tun0: Chat: Phone: 5571090 This line is your ppp being informed of the phone number. Sep 8 22:25:12 ppp[221]: tun0: Chat: deflink: Dial attempt 1 of 1 Sep 8 22:25:12 ppp[221]: tun0: Chat: Send: AT^M This line is the modem being sent an attention signal. Sep 8 22:25:12 ppp[221]: tun0: Chat: Expect(5): OK This line tells that ppp is expecting the modem to responds with an OK - the standard response to an attention signal, and that it expects the response in 5 seconds (this is due to your set dial command in /etc/ppp/ppp.conf.) Sep 8 22:25:17 ppp[221]: tun0: Chat: Expect timeout Here, (5 seconds later), the system has not gotten the expected response, so it times out and tries again. Sep 8 22:25:17 ppp[221]: tun0: Chat: Send: AT^M Sep 8 22:25:17 ppp[221]: tun0: Chat: Expect(5): OK Sep 8 22:25:22 ppp[221]: tun0: Chat: Expect timeout Sep 8 22:25:22 ppp[221]: tun0: Warning: Chat script failed The same thing has happened again - and the connection fails. Sep 8 22:25:22 ppp[221]: tun0: Phase: deflink: dial - hangup Your problems are indicative of a configuration problem or possible a modem hardware problem. Do you ever actually hear the modem pick up the phone (do you get a dial tone)? Can you post a copy of your ppp.conf file? ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: User PPP connection problems
Hello, I am no expert, but I use PPP exclusively to set up a connection to the net. One thing I see different in your configuration than in mine is this: set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0 If you are using PPP and you are doing dynamic IP addressing, I succeed with this, instead: set ifaddr 0 0 255.255.255.0 0.0.0.0 This, of course, would be found in /etc/ppp/ppp.conf. I suggest getting your hands on a copy of The Complete FreeBSD. That book has saved my life many times. Hope this helps a bit. --- Tadimeti Keshav [EMAIL PROTECTED] wrote: Hi all, I a newbie here. I compiled the kernel with COM3 and COM4 enabled. I tried connecting to the internet but failed. I am pasting the relavant portion of /var/ppp/ppp.log. Please help!! Thanks in advance Keshav Sep 8 22:25:12 ppp[220]: Phase: Using interface: tun0 Sep 8 22:25:12 ppp[220]: Phase: deflink: Created in closed state Sep 8 22:25:12 ppp[220]: tun0: Command: default: ident user-ppp VERSION (built COMPILATIONDATE) Sep 8 22:25:12 ppp[220]: tun0: Command: default: set device /dev/cuaa1 Sep 8 22:25:12 ppp[220]: tun0: Command: default: set speed 57600 Sep 8 22:25:12 ppp[220]: tun0: Command: default: set dial ABORT BUSY ABORT NO\sCARRIER TIMEOUT 5 AT OK-AT-OK ATE1Q0 OK \dATDT\T TIMEOUT 40 CONNECT Sep 8 22:25:12 ppp[220]: tun0: Command: default: set timeout 180 Sep 8 22:25:12 ppp[220]: tun0: Command: default: enable dns Sep 8 22:25:12 ppp[220]: tun0: Command: papchap: set phone 5571090 Sep 8 22:25:12 ppp[220]: tun0: Command: papchap: set authname dtitg Sep 8 22:25:12 ppp[220]: tun0: Command: papchap: set authkey Sep 8 22:25:12 ppp[220]: tun0: Command: papchap: set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0 Sep 8 22:25:12 ppp[220]: tun0: Command: papchap: add default HISADDR Sep 8 22:25:12 ppp[221]: tun0: Phase: PPP Started (background mode). Sep 8 22:25:12 ppp[221]: tun0: Phase: bundle: Establish Sep 8 22:25:12 ppp[221]: tun0: Phase: deflink: closed - opening Sep 8 22:25:12 ppp[221]: tun0: Phase: deflink: Connected! Sep 8 22:25:12 ppp[221]: tun0: Phase: deflink: opening - dial Sep 8 22:25:12 ppp[221]: tun0: Chat: Phone: 5571090 Sep 8 22:25:12 ppp[221]: tun0: Chat: deflink: Dial attempt 1 of 1 Sep 8 22:25:12 ppp[221]: tun0: Chat: Send: AT^M Sep 8 22:25:12 ppp[221]: tun0: Chat: Expect(5): OK Sep 8 22:25:17 ppp[221]: tun0: Chat: Expect timeout Sep 8 22:25:17 ppp[221]: tun0: Chat: Send: AT^M Sep 8 22:25:17 ppp[221]: tun0: Chat: Expect(5): OK Sep 8 22:25:22 ppp[221]: tun0: Chat: Expect timeout Sep 8 22:25:22 ppp[221]: tun0: Warning: Chat script failed Sep 8 22:25:22 ppp[221]: tun0: Phase: deflink: dial - hangup Sep 8 22:25:22 ppp[221]: tun0: Phase: deflink: Disconnected! Sep 8 22:25:22 ppp[221]: tun0: Phase: deflink: Connect time: 10 secs: 0 octets in, 0 octets out Sep 8 22:25:22 ppp[221]: tun0: Phase: deflink: : 0 packets in, 0 packets out Sep 8 22:25:22 ppp[221]: tun0: Phase: total 0 bytes/sec, peak 0 bytes/sec on Mon Sep 8 22:25:22 2003 Sep 8 22:25:22 ppp[221]: tun0: Phase: deflink: hangup - closed Sep 8 22:25:22 ppp[221]: tun0: Phase: bundle: Dead Sep 8 22:25:22 ppp[221]: tun0: Phase: PPP Terminated (normal). Sep 8 22:25:22 ppp[221]: tun0: Chat: Parent notified of failure Sep 8 22:25:22 ppp[220]: tun0: Phase: Parent: Child failed (errdead) Want to chat instantly with your online friends? Get the FREE Yahoo! Messenger http://mail.messenger.yahoo.co.uk ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-newbies To unsubscribe, send any mail to [EMAIL PROTECTED] __ Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software http://sitebuilder.yahoo.com ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
ppp connection problem
Greetings all: I am connecting to my isp with the following ppp.conf using the command ppp -auto isp when i run the command i usually connect on the second try. for some reason the connection drops after the first try, but my true problem is i can ping internal ips and not ips outside the network. I think my problem is with my default route is not setup properly. here is a snip of my ifconfig, for some reason i have two tun devices. i think that is caused by trying to dial up twice? any thought on how to setup my default route properly? Thanks, brian ifconfig tun0: flags=8051UP,POINTOPOINT,RUNNING,MULTICAST mtu 1500 inet 199.17.4.229 -- 199.17.4.4 netmask 0xff00 Opened by PID 111 tun1: flags=8051UP,POINTOPOINT,RUNNING,MULTICAST mtu 1500 inet 10.0.0.1 -- 10.0.0.2 netmask 0xff00 Opened by PID 121 Routing tables Internet: DestinationGatewayFlagsRefs Use Netif Expire default199.17.4.4UGSc4 2620 tun0 10.0.0.2 10.0.0.1 UH 00 tun1 127.0.0.1 127.0.0.1 UH 00lo0 199.17.4.4199.17.4.229 UH 40 tun0 /etc/ppp/ppp.conf - default: set device /dev/cuaa1 set speed 115200 set dial ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \ \\ AT OK-AT-OK ATE1Q0 OK \\dATDP\\T TIMEOUT 40 CONNECT set timeout 180 enable dns isp: set phone xxx set authname xxx set authkey xxx set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0 add default HISADDR ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: ppp connection problem
On Wed, 2003-07-23 at 09:10, Brian Henning wrote: I am connecting to my isp with the following ppp.conf using the command ppp -auto isp when i run the command i usually connect on the second try. for some reason the connection drops after the first try, but my true problem is i can ping internal ips and not ips outside the network. I think my problem is with my default route is not setup properly. Removing the 'set ifaddr' line fixed some weird problems for me. However, I use ppp for PPPoE. It might be worth a try, though. I know several people that have removed that line successfully. -- Adam [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
RE: ppp connection problem
Please post /var/log/ppp.log be sure to empty ppp.log before you run last test so log only contains last 2 dials Try starting using this command ppp -background -nat isp Also post your /etc/rc.conf Add this to your ppp.conf isp section set timeout 0 # no idle time out, will not disconnect disable pred1 deflate lqr# compression features line quality reporting denypred1 deflate lqr # compression features line quality reporting set log Phase Chat LCP IPCP CCP tun command #use for testing #set log Phase tun #use to avoid excessive log sizes -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Brian Henning Sent: Wednesday, July 23, 2003 9:10 AM To: freebsd Subject: ppp connection problem Greetings all: I am connecting to my isp with the following ppp.conf using the command ppp -auto isp when i run the command i usually connect on the second try. for some reason the connection drops after the first try, but my true problem is i can ping internal ips and not ips outside the network. I think my problem is with my default route is not setup properly. here is a snip of my ifconfig, for some reason i have two tun devices. i think that is caused by trying to dial up twice? any thought on how to setup my default route properly? Thanks, brian ifconfig tun0: flags=8051UP,POINTOPOINT,RUNNING,MULTICAST mtu 1500 inet 199.17.4.229 -- 199.17.4.4 netmask 0xff00 Opened by PID 111 tun1: flags=8051UP,POINTOPOINT,RUNNING,MULTICAST mtu 1500 inet 10.0.0.1 -- 10.0.0.2 netmask 0xff00 Opened by PID 121 Routing tables Internet: DestinationGatewayFlagsRefs Use Netif Expire default199.17.4.4UGSc4 2620 tun0 10.0.0.2 10.0.0.1 UH 00 tun1 127.0.0.1 127.0.0.1 UH 00lo0 199.17.4.4199.17.4.229 UH 40 tun0 /etc/ppp/ppp.conf - default: set device /dev/cuaa1 set speed 115200 set dial ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \ \\ AT OK-AT-OK ATE1Q0 OK \\dATDP\\T TIMEOUT 40 CONNECT set timeout 180 enable dns isp: set phone xxx set authname xxx set authkey xxx set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0 add default HISADDR ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: ppp connection
On Friday 18 July 2003 08:20 pm, Marvin J. Kosmal wrote: I can't ping anyone. TIA Send me copies of your /etc/ppp/ppp.conf and /etc/resolv.conf so I can diagnose your problem. I need firsthand info if I'm to properly troubleshoot your problem. -- Matthew Graybosch http://www.starbreaker.net I am become root, shatterer of kernels. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: ppp connection
These are the files ++/etc/ppp/ppp.conf++ # # PPP Sample Configuration File # Originally written by Toshiharu OHNO # Simplified 5/14/1999 by [EMAIL PROTECTED] # # See /usr/share/examples/ppp/ for some examples # # $FreeBSD: src/etc/ppp/ppp.conf,v 1.2.2.5 2001/07/13 10:55:23 brian Exp $ # default: set log Phase Chat LCP IPCP CCP tun command ident user-ppp VERSION (built COMPILATIONDATE) # Ensure that device references the correct serial port # for your modem. (cuaa0 = COM1, cuaa1 = COM2) # set device /dev/cuaa0 set speed 115200 set dial ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \ \\ AT OK-AT-OK ATE1Q0 OK \\dATDT\\T TIMEOUT 40 CONNECT set timeout 180# 3 minute idle timer (the default) enable dns # request DNS info (for resolv.conf) papchap: # # edit the next three lines and replace the items in caps with # the values which have been assigned by your ISP. # set phone 360.314.4221 set authname lamsokvr set authkey * set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0 add default HISADDR# Add a (sticky) default route ++/etc/resolv.conf*** domain xprt.net nameserver 209.102.124.11 nameserver 209.102.124.10 Thank YOU On Sat, 2003-07-19 at 07:46, Matthew Graybosch wrote: On Friday 18 July 2003 08:20 pm, Marvin J. Kosmal wrote: I can't ping anyone. TIA Send me copies of your /etc/ppp/ppp.conf and /etc/resolv.conf so I can diagnose your problem. I need firsthand info if I'm to properly troubleshoot your problem. -- Matthew Graybosch http://www.starbreaker.net I am become root, shatterer of kernels. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] -- Marvin J. Kosmal Linux Activist Registered User # 88512 Brought to by Libranet 2.7 ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
RE: ppp connection
Marvin, You say user ppp is not dialing out. What makes you think your modem is working at all. Does the dmesg.boot file show your modem being found? Are you using an MS/Winmodem, is your modem an external serial modem, USB external, internal PCI modem. Do you have plug-n-play disabled and serial ports enabled in the motherboards bios? What version of FBSD you are using? Does the 'TIP' command connect to the modem and can you issue Hayes 'AT' commands to modem? You have to provide much greater details about what you are trying to do and what you have tried to do to debug problem. There is no size limit to how big your email message can be so do not spare the details. The most important question HAVE YOU GOOLGE THE FBSD QUESTIONS LIST EMAIL ARCHIVES FOR MODEMS OR USER PPP, to try to find the answer to your problem your self. For your information that is your first place you should look when you have a problem. Your question has been answered many times before on this list so please do the same leg work the rest of us do when we have problems before throwing your hands up into the air and asking for help. Take the time to learn from the archives, the true fun of FBSD comes from figuring out a problem on your own. I use the this link to google all the time. http://groups.google.com/groups?hl=engroup=mailing.freebsd.question s If you still need help, post these files, /var/run/dmesg.boot /etc/ppp/ppp.conf /etc/rc.conf /ver/log/ppp.log containing only the last start of user ppp, and give all the details you can so people have the complete picture of you're files to look for problems. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: ppp connection
On Sat, Jul 19, 2003 at 03:20:21PM -0700, Marvin J. Kosmal wrote: papchap: # # edit the next three lines and replace the items in caps with # the values which have been assigned by your ISP. # set phone 360.314.4221 Your phone number value is incorrect. Take out the .. -- Jonathan Chen [EMAIL PROTECTED] -- Build a man a fire, and he'll be warm for a day. Set a man on fire, and he'll be warm for the rest of his life. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
ppp connection
Hi trying to get my ppp connection to work I created a /etc/resolv.conf /etc/ppp/options /etc/ppp/chat.script /etc/ppp/pap-secrets I launch it with /usr/sbin/pppd And nothing happens Any ideas?? -- Marvin J. Kosmal Linux Activist Registered User # 88512 Brought to by Libranet 2.7 ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: ppp connection
On Friday 18 July 2003 06:00 pm, Marvin J. Kosmal wrote: Hi trying to get my ppp connection to work And nothing happens Any ideas?? It sounds like you're trying to use kernel ppp. Use user ppp instead. Edit /etc/ppp/ppp.conf to set the modem device, phone number, userid, and password. Then invoke it with ppp -foreground papchap. -- Matthew Graybosch http://www.starbreaker.net I am become root, shatterer of kernels. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: ppp connection
On Fri, 2003-07-18 at 16:23, Matthew Graybosch wrote: On Friday 18 July 2003 06:00 pm, Marvin J. Kosmal wrote: Hi trying to get my ppp connection to work And nothing happens Any ideas?? It sounds like you're trying to use kernel ppp. Use user ppp instead. Edit /etc/ppp/ppp.conf to set the modem device, phone number, userid, and password. Then invoke it with ppp -foreground papchap. This is what I get now.. rl0: flags=8802BROADCAST,SIMPLEX,MULTICAST mtu 1500 ether 00:4f:4e:05:32:b6 media: Ethernet autoselect (10baseT/UTP) status: no carrier lp0: flags=8810POINTOPOINT,SIMPLEX,MULTICAST mtu 1500 faith0: flags=8002BROADCAST,MULTICAST mtu 1500 lo0: flags=8049UP,LOOPBACK,RUNNING,MULTICAST mtu 16384 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4 inet 127.0.0.1 netmask 0xff00 ppp0: flags=8010POINTOPOINT,MULTICAST mtu 1500 sl0: flags=c010POINTOPOINT,LINK2,MULTICAST mtu 552 tun0: flags=8010POINTOPOINT,MULTICAST mtu 1500 I can't ping anyone. TIA -- Matthew Graybosch http://www.starbreaker.net I am become root, shatterer of kernels. -- Marvin J. Kosmal Linux Activist Registered User # 88512 Brought to by Libranet 2.7 ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: ppp connection
tun0: flags=8010POINTOPOINT,MULTICAST mtu 1500 Seems the ppp connection has obviously failed man ppp and make sure you set it up properly... Did you not notice any errors? otherwise tail -40 /var/log/ppp.log and try see what went wrong. - Original Message - From: Marvin J. Kosmal [EMAIL PROTECTED] To: [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Sent: Saturday, July 19, 2003 2:20 AM Subject: Re: ppp connection On Fri, 2003-07-18 at 16:23, Matthew Graybosch wrote: On Friday 18 July 2003 06:00 pm, Marvin J. Kosmal wrote: Hi trying to get my ppp connection to work And nothing happens Any ideas?? It sounds like you're trying to use kernel ppp. Use user ppp instead. Edit /etc/ppp/ppp.conf to set the modem device, phone number, userid, and password. Then invoke it with ppp -foreground papchap. This is what I get now.. rl0: flags=8802BROADCAST,SIMPLEX,MULTICAST mtu 1500 ether 00:4f:4e:05:32:b6 media: Ethernet autoselect (10baseT/UTP) status: no carrier lp0: flags=8810POINTOPOINT,SIMPLEX,MULTICAST mtu 1500 faith0: flags=8002BROADCAST,MULTICAST mtu 1500 lo0: flags=8049UP,LOOPBACK,RUNNING,MULTICAST mtu 16384 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4 inet 127.0.0.1 netmask 0xff00 ppp0: flags=8010POINTOPOINT,MULTICAST mtu 1500 sl0: flags=c010POINTOPOINT,LINK2,MULTICAST mtu 552 tun0: flags=8010POINTOPOINT,MULTICAST mtu 1500 I can't ping anyone. TIA -- Matthew Graybosch http://www.starbreaker.net I am become root, shatterer of kernels. -- Marvin J. Kosmal Linux Activist Registered User # 88512 Brought to by Libranet 2.7 ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: PPP connection via a GMC router
From: Fuji Zhang [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Thursday, September 19, 2002 11:22 PM Subject: PPP connection via a GMC router hi, i had ADSL working via a D-Link card to Bell Sympatico just fine. then my roommate wanted to share the ISP w/ me. so we bought a GMC router. He had his Linux box working behind the router. but my FreeBSD box stopped working. what am i missing? your help would certainly be appreciated. please respond to this address directly as i am not subscribing to list now. maybe if you specify what exactly is not working someone could help you out. if you mean the network functions are not working, i would recommend going into your config files to see what's up. if you previously set your ip statically in your conf files, you probably now will want to set it through dhcp (as in, set that interface = to DHCP in your rc.conf), because that gmc router is probably using dhcp to assign your box an internal ip. to test out this theory, try running /sbin/dhclient if0, where if0 is the name of your ethernet NIC (e.g. xl0, dc0, etc). hope this helps. -- dfolkins To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body of the message
PPP connection via a GMC router
hi, i had ADSL working via a D-Link card to Bell Sympatico just fine. then my roommate wanted to share the ISP w/ me. so we bought a GMC router. He had his Linux box working behind the router. but my FreeBSD box stopped working. what am i missing? your help would certainly be appreciated. please respond to this address directly as i am not subscribing to list now. Sincerely, Fujie Zhang To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body of the message
Re: What kind of PPP connection do you have?
On Sat, 14 Sep 2002, Greg 'groggy' Lehey wrote: I'm currently revising my book The Complete FreeBSD. The new edition should be out in the bookstores in a couple of months. Right now I'm revising the chapter on PPP setup, which was written in 1997. Since then, the ISP landscape has changed dramatically, and I suspect that large parts of the chapter are no longer relevant. I'd like your feedback on the following issues: 1. What kind of authentication do you use? Please don't reply if it's PAP or CHAP; I think that's almost universal. I'm just interested if anybody is using anything else (like a UNIX login, for example). Haven't used a login chat script with ppp for at least five years... :) 2. Do you use user PPP or kernel PPP? I'd like answers in each case here, please. I note that other books have decided to describe only one or the other, but currently I think there's a reason for both. User PPP. Hmm... can kernel PPP do PPPoE? /Mikko Mikko Työläjä[EMAIL PROTECTED] To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body of the message
