Hello,
I have a bunch of FreeBSD systems, many with hardware RAIDs. The problem is, I have no easy way of checking to see that they are okay. I tried once to get the 3ware binary to work with the 3ware kernel module to get to work with the 3ware firmware update that I had to ... ARGHH! It was awful.
On the other hand, in /var/run/dmesg :
twed0: <TwinStor, Normal> on twe0 twed0: 114472MB (234439600 sectors) twe0: command interrupt
Or, on another system:
amrd0: <LSILogic MegaRAID logical drive> on amr0 amrd0: 140012MB (286744576 sectors) RAID 5 (optimal)
I know from experience that the "Normal" on the twed0 means "nothing broken" and I like to think the "optimal" on the amrd0 means "RAID5 is doing fine." This is enough information for me . . . if a RAID is in a failure state, I can live with gracefully failing a server, if need be, and booting in to the BIOS to get the real information.
The problem is, I only get these messages when I boot . . . and I don't boot very often, of course. I have tried poking around sysctl, atacontrol, camcontrol . . . all to see how I might probe out these messages on a regular basis, but I can not figure it out. Can someone give me a tip on how to pull up bits of dmesg output while the system is running? Or if someone has better advice on checking up on the status of various flavors of RAID . . .
Thanks in Advance, -danny _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
