Re: sound mysteriously not working
On 11/23/04 06:18 PM, Kevin Smith sat at the `puter and typed: I had followed the handbook to configure sound (sound blaser Live!) on my new 5.3 installation. It was working yesterday but it doesn't work now. Just to verify, I booted windows on the same system and the sound card/speakers are not working. Here is my dmesg output and sndstat: dmesg|fgrep pcm0 pcm0: Creative EMU10K1 port 0xc800-0xc81f irq 18 at device 2.0 on pci2 pcm0: TriTech TR28602 AC97 Codec /home/kevin cat /dev/sndstat FreeBSD Audio Driver (newpcm) Installed devices: pcm0: Creative EMU10K1 at io 0xc800 irq 18 kld snd_emu10k1 (4p/2r/0v channels duplex default) Any suggestions on what to try next ? I don't think this is a problem with the card or the volume. I see this a lot on FreeBSD, since 4.8. Matter of fact, I just tried playing a wmv file with mplayer, and got no sound. It was working fine before. Every once in awhile my sound just disappears. Now, even a simple waveplay command acts like it's doing its job, but nothing comes out. Catting a .au file directly to the /dev/audio0.* devices just announces that the device is busy. The only thing that brings the sound back is a reboot, which isn't an option I really like. The card on this particular machine is an onboard Intel 5.1 sound chip. How the heck am I supposed to reset these devices? There's nothing in the handbook or FAQ that I could find. Lou -- Louis LeBlanc [EMAIL PROTECTED] Fully Funded Hobbyist, KeySlapper Extrordinaire :) http://www.keyslapper.org ԿԬ Taphephobia: Fear of being buried alive. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: sound mysteriously not working
I had a similar issue. For me it was that the sound volumes were set to 0. Type the command mixer and if it gives you zeros for the settings then that is what is going on. I used the mixer command to set these. It modified my config files for me and works fine now. Hope this helps. Chuck --- Kevin Smith [EMAIL PROTECTED] wrote: sorry, a typo... I booted windows on the same system and the sound card/speakers are not working.. meant is say sound card/speakers is working with windows. Kevin Smith wrote: I had followed the handbook to configure sound (sound blaser Live!) on my new 5.3 installation. It was working yesterday but it doesn't work now. Just to verify, I booted windows on the same system and the sound card/speakers are not working. Here is my dmesg output and sndstat: dmesg|fgrep pcm0 pcm0: Creative EMU10K1 port 0xc800-0xc81f irq 18 at device 2.0 on pci2 pcm0: TriTech TR28602 AC97 Codec /home/kevin cat /dev/sndstat FreeBSD Audio Driver (newpcm) Installed devices: pcm0: Creative EMU10K1 at io 0xc800 irq 18 kld snd_emu10k1 (4p/2r/0v channels duplex default) Any suggestions on what to try next ? -Kevin ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
sound mysteriously not working
I had followed the handbook to configure sound (sound blaser Live!) on my new 5.3 installation. It was working yesterday but it doesn't work now. Just to verify, I booted windows on the same system and the sound card/speakers are not working. Here is my dmesg output and sndstat: dmesg|fgrep pcm0 pcm0: Creative EMU10K1 port 0xc800-0xc81f irq 18 at device 2.0 on pci2 pcm0: TriTech TR28602 AC97 Codec /home/kevin cat /dev/sndstat FreeBSD Audio Driver (newpcm) Installed devices: pcm0: Creative EMU10K1 at io 0xc800 irq 18 kld snd_emu10k1 (4p/2r/0v channels duplex default) Any suggestions on what to try next ? -Kevin ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: sound mysteriously not working
sorry, a typo... I booted windows on the same system and the sound card/speakers are not working.. meant is say sound card/speakers is working with windows. Kevin Smith wrote: I had followed the handbook to configure sound (sound blaser Live!) on my new 5.3 installation. It was working yesterday but it doesn't work now. Just to verify, I booted windows on the same system and the sound card/speakers are not working. Here is my dmesg output and sndstat: dmesg|fgrep pcm0 pcm0: Creative EMU10K1 port 0xc800-0xc81f irq 18 at device 2.0 on pci2 pcm0: TriTech TR28602 AC97 Codec /home/kevin cat /dev/sndstat FreeBSD Audio Driver (newpcm) Installed devices: pcm0: Creative EMU10K1 at io 0xc800 irq 18 kld snd_emu10k1 (4p/2r/0v channels duplex default) Any suggestions on what to try next ? -Kevin ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]