Yesterday I upgraded my hardware from a Pentium2 400mhz setup (running
freebsd 5.4) to a Sempron 2.8ghz and installed freebsd 6.1 on it (the
32bit version).
There are 4 harddisks attached to the IDE-controllers:
ad0: 6150MB Seagate ST36421A 6.01 at ata0-master UDMA66
ad1: 38166MB Seagate ST340823A 3.39 at ata0-slave UDMA100
ad2: 78167MB Maxtor 6Y080L0 YAR41BW0 at ata1-master UDMA133
ad3: 38166MB Seagate ST340823A 3.39 at ata1-slave UDMA100
ad1 and ad3 are the same and both contain important data.
After the installation of freebsd I noticed a lot of UDMA-errors:
ad1: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=63
ad3: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=63
ad1: WARNING - WRITE_DMA UDMA ICRC error (retrying request) LBA=63
ad3: WARNING - WRITE_DMA UDMA ICRC error (retrying request) LBA=63
After decreasing the speed of UDMA (on ad1 and ad3) in the
BIOS-Setup, ad1 worked fine, without any errors, but ad3 still
produces the same error-messages and is not mountable:
(14:51) root (/home/septi) %mount /dev/ad3s1 /test
mount: /dev/ad3s1: Input/output error
Here the dmesg output:
ad3: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=12063
ad3: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=12063
ad3: FAILURE - READ_DMA status=51READY,DSC,ERROR
error=84ICRC,ABORTED LBA=12063
g_vfs_done():ad3s1[READ(offset=6144000, length=4096)]error = 5
ad3: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=63
ad3: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=63
ad3: FAILURE - READ_DMA status=51READY,DSC,ERROR error=84ICRC,ABORTED LBA=63
I also replaced the IDE-cable but it changed nothing...
Does anybody have an idea?
--
everyone's pink on the inside - http://www.nuffinsirius.de
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
