usb card reader problem
Howdy! I'd like to know how card readers, using umass, behave on future 6.3 or 7.0. On my amd64 6.2, after loading umass module, only first time I connect usb cable to it I see reading of "da" devices. No daxs1 in /dev direc- tory. Next remove/connect of usb reader gives nothing at all. Any news? Of course, it is always possible I missed some necessary step. Zoran ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: 7 on Soekris net4801?
On Sat, 3 Nov 2007, Henrik Brix Andersen wrote: > On Sun, Nov 04, 2007 at 02:59:36AM +1100, Ian Smith wrote: > > any particular/new issues with RELENG_7 on the Soekris net4801? > > > > Thought I should check before upgrading my T23 as a build platform .. > > I haven't done this before, and will be relying on the howtos for 6.X > > I recently upgraded two of my net4801s to RELENG_7 - the only problem > I have seen so far, is that savecore(8) attempts to do non-aligned DMA > transfers and fails. I haven't had time to dig further into this issue > yet, though. Thanks, Brix. I'm wondering if that's still (again?) to do with item 3 at http://www.soekris.com/Issue0003.htm ? I've no idea whether a similar 'quick-fix' to that given for FreeBSD 4.X to /sys/dev/ata/ata-dma.c would work with the 5.5-S and 6.1-R code I have here, noting that the alignment is now specified in bytes rather than the earlier bytes-1, so '4' is presumably the value needed for dword alignment. Hmm, ok, trying to dig a little deeper .. rev 1.118 notes say: Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. but I couldn't find anywhere in 1.118 or in later versions up to 1.147 (RELENG_7, HEAD) that does anything other than 'ch->dma->alignment = 2;' (Not that me not finding it means much :) I also noticed at 1.137.2.2: Add support for using DMA on dump, greatly speeds up the dump process. Copying Soren in case he may have a bead on this, but it hardly seems any impediment to preparation or building for it when the box arrives. Cheers, Ian ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: FreeBSD-BETA2 Signal 11 During Install
Byung-Hee HWANG wrote: Hi, On Sat, 2007-11-03 at 18:27 -0400, [EMAIL PROTECTED] wrote: Hi, I tested out FreeBSD 7.0-BETA2 [...] Really? I think you are from the future.. lftp :~> open freebsd.mirrors.tds.net lftp freebsd.mirrors.tds.net:~> cd pub/FreeBSD/releases/i386/ISO-IMAGES cd ok, cwd=/pub/FreeBSD/releases/i386/ISO-IMAGES lftp freebsd.mirrors.tds.net:/pub/FreeBSD/releases/i386/ISO-IMAGES> cd 7.0 lftp freebsd.mirrors.tds.net:/pub/FreeBSD/releases/i386/ISO-IMAGES/7.0> ls -rw-r--r--1 ftp ftp 116736000 Nov 02 17:20 7.0-BETA2-i386-bootonly.iso -rw-r--r--1 ftp ftp 669032448 Nov 02 17:21 7.0-BETA2-i386-disc1.iso -rw-r--r--1 ftp ftp372736 Nov 02 17:21 7.0-BETA2-i386-disc2.iso -rw-r--r--1 ftp ftp 232144896 Nov 02 17:22 7.0-BETA2-i386-docs.iso -rw-r--r--1 ftp ftp 266 Nov 02 17:22 CHECKSUM.MD5 -rw-r--r--1 ftp ftp 406 Nov 02 17:22 CHECKSUM.SHA256 It was released on November 2nd. Unless someone on accident uploaded the beta 2 images by mistake at the wrong time, it exists. Russell Doucette ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: FreeBSD-BETA2 Signal 11 During Install
Hi, On Sat, 2007-11-03 at 18:27 -0400, [EMAIL PROTECTED] wrote: > Hi, > > I tested out FreeBSD 7.0-BETA2 [...] Really? I think you are from the future.. -- "I don't often beg of you. Please do this just for me." -- Kay Adams, "Chapter 29", page 412-413 ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
panic: bad pte (releng_7)
Dears,
Today i got the following crash.
Its a GENERIC kernel, but without firewire, and with ULE. the rest is
intact.
Unread portion of the kernel message buffer:
TPTE at 0x84004c40 IS ZERO @ VA 800988000
panic: bad pte
cpuid = 0
Uptime: 2d3h46m1s
Physical memory: 2036 MB
Dumping 279 MB: 264 248 232 216 200 184 168 152 136 120 104 88 72 56 40
24 8
#0 doadump () at pcpu.h:194
194 __asm __volatile("movq %%gs:0,%0" : "=r" (td));
(kgdb) bt
#0 doadump () at pcpu.h:194
#1 0x0004 in ?? ()
#2 0x8045b9f9 in boot (howto=260)
at /usr/src/sys/kern/kern_shutdown.c:409
#3 0x8045bdfd in panic (fmt=0x104 )
at /usr/src/sys/kern/kern_shutdown.c:563
#4 0x806d2f89 in pmap_remove_pages (pmap=0xff0020df1c58)
at /usr/src/sys/amd64/amd64/pmap.c:2948
#5 0x8066bd78 in vmspace_exit (td=0xff004659a9f0)
at /usr/src/sys/vm/vm_map.c:395
#6 0x8043bebc in exit1 (td=0xff004659a9f0, rv=0)
at /usr/src/sys/kern/kern_exit.c:294
#7 0x8043d26e in sys_exit (td=Variable "td" is not available.
) at /usr/src/sys/kern/kern_exit.c:98
#8 0x806dddb7 in syscall (frame=0xaeceec70)
at /usr/src/sys/amd64/amd64/trap.c:822
#9 0x806c435b in Xfast_syscall ()
at /usr/src/sys/amd64/amd64/exception.S:272
#10 0x000800933ccc in ?? ()
Previous frame inner to this frame (corrupt stack?)
What could this be?
this is RELENG_7 from Thu Nov 1 18:04:33 CLST 2007
thanks!
--
Phillip N. <[EMAIL PROTECTED]>
___
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
FreeBSD-BETA2 Signal 11 During Install
Hi, I tested out FreeBSD 7.0-BETA2 using VMware Player, and using the boot-only disc FreeBSD installed fine, until when I was asked for Linux binary compatibility. Upon hitting enter for Yes, I got a signal 11. The only information given was on console ttyv1 with a one-line debug error saying it caught signal 11. This is all the information I could get out of it. However, after it rebooted on its own (which took about 3 minutes, I suspect it was timing out being connected to a mirror) it booted normally on the virtual hard disk, leaving me to finish the installation manually where it left off. I was wondering if anyone noticed a similar error when trying to grab files from the mirror upon requesting Linux compatibility during the install. Russell Doucette ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
FreeBSD-BETA2 Signal 11 During Install
Sorry for the double-post, but it appears it's not related to a network install or installing Linux compatibility files. It occurs when log into a mirror and tries to read the package data from INDEX: it core dumps with signal 11. Running gdb with a full backtrace reveals this: #12 0x28236e98 in __tsd_lock () from /lib/libc.so.7 No symbol table info available. Should I post any more information? Russell Doucette ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: I would like to help in the development and testing of FreeBSD
On Sat, Nov 03, 2007 at 05:22:26PM -0300, Hugo Santos Dias wrote: > > Please as do I to help in the development and testing of FreeBSD? > > I would like to help in the development and testing of FreeBSD Do what you are already doing. Find bugs and fix them. Submit the fixes with send-pr(1) or similar means. Enhance a component of FreeBSD. Submit your changes via send-pr(1) or similar means. As trust and respect builds for your abilities and contributions you will be invited to rise closer to core. -- David Kelly N4HHE, [EMAIL PROTECTED] Whom computers would destroy, they must first drive mad. ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
I would like to help in the development and testing of FreeBSD
Hi, my name is Hugo Santos Dias, living in Brazil in Vitoria da Conquista, Bahia, I have great interest in helping in the development and testing of versions of FreeBSD, I use FreeBSD on my desktop and my servers. I am a student of computer science at the UESB - Universidade Estadual do Sudoeste da Bahia (State University of Southwest Bahia), and one of my projects is a path for ipfw, so that it can read data in layer-7 like iptables-layer7. I understand c/c++, shellscripts, perl, a bit of java (needed for the work of Discipline graphics computer - http://www.compenter.com.br/hugo/prova3/ - the link robo.htm). Working in a isp, wiress and via cable, and have deep knowledge of networks and tcp / ip. Please as do I to help in the development and testing of FreeBSD? I would like to help in the development and testing of FreeBSD -- Hugo S. Dias "Unix is user friendly. It's just selective about who its friends are." "Linux is for people who hate Windows. BSD is for people who love UNIX." ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
bge driver still causes freeze
Hello, bge driver still causes freeze on my HP 6710b laptop, see also http://lists.freebsd.org/pipermail/freebsd-current/2007-September/077368.html, but commenting out a few lines in if_bge.c,v 1.198.2.1 makes driver to work: --- if_bge.c.orig 2007-11-03 12:42:25.0 +0100 +++ if_bge.c2007-11-03 12:08:53.0 +0100 @@ -1742,9 +1742,9 @@ #if __FreeBSD_version > 700024 const char *pname; - if (pci_get_vpd_ident(dev, &pname) == 0) - snprintf(model, 64, "%s", pname); - else +// if (pci_get_vpd_ident(dev, &pname) == 0) +// snprintf(model, 64, "%s", pname); +// else #endif snprintf(model, 64, "%s %s", v->v_name, Could someone investigate this? -- http://mail.atlas.cz/wapmail/ ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: 7 on Soekris net4801?
On Sun, Nov 04, 2007 at 02:59:36AM +1100, Ian Smith wrote: > any particular/new issues with RELENG_7 on the Soekris net4801? > > Thought I should check before upgrading my T23 as a build platform .. > I haven't done this before, and will be relying on the howtos for 6.X I recently upgraded two of my net4801s to RELENG_7 - the only problem I have seen so far, is that savecore(8) attempts to do non-aligned DMA transfers and fails. I haven't had time to dig further into this issue yet, though. Brix -- Henrik Brix Andersen <[EMAIL PROTECTED]> pgpc2pQUd7CFv.pgp Description: PGP signature
7 on Soekris net4801?
Hi, any particular/new issues with RELENG_7 on the Soekris net4801? Thought I should check before upgrading my T23 as a build platform .. I haven't done this before, and will be relying on the howtos for 6.X Cheers, Ian ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: em 6.6.6 - watchdog timeout
Hi Jack, --On Thursday, November 01, 2007 13:36 -0700 Jack Vogel <[EMAIL PROTECTED]> wrote: I should also note that this only applies to PCI-E NICs, 82571 and later. Jack Have tested - enable MSI with the original 6.6.6 driver - the new driver files you sent to -stable with and without MSI enabled In all cases I can run all tests and programs that previous gave watchdog problems without any problems. Thanks! /glz ... the future isMobile Goran Lowkrantz <[EMAIL PROTECTED]> System Architect, isMobile AB Sandviksgatan 81, PO Box 58, S-971 03 Luleå, Sweden Mobile: +46(0)70-587 87 82 http://www.ismobile.com ... ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
