4TB Western Digital My Book 1230 USB hard drive not working on 10.2
I have a 4TB external USB drive (Western Digital My Book 1230) that I am trying to use under FreeBSD/amd64 10.2 (10.2-PRERELEASE #0 r286052: Wed Jul 29 20:59:39 EDT 2015). This system has a MSI 760GMA-P34 (FX) motherboard. The drive probes unreliably when plugged in to a USB 3 port. It reliably probes when plugged into a USB 2 port. However, it works in neither cases. Attempting to dd from the drive results in a dd: /dev/da0: Invalid argument. When plugged in to a USB 2 port, this is how the drive is probed: ugen6.2: Western Digital at usbus6 umass0: Western Digital My Book 1230, class 0/0, rev 2.10/10.65, addr 2 on usbus6 umass0: SCSI over Bulk-Only; quirks = 0xc001 umass0:9:0:-1: Attached to scbus9 da0 at umass-sim0 bus 0 scbus9 target 0 lun 0 da0: WD My Book 1230 1065 Fixed Direct Access SPC-4 SCSI device da0: Serial Number 57434334453056594A4C4A4A da0: 40.000MB/s transfers da0: 3815415MB (976746240 4096 byte sectors: 255H 63S/T 60799C) da0: quirks=0x2NO_6_BYTE ses0 at umass-sim0 bus 0 scbus9 target 0 lun 1 ses0: WD SES Device 1065 Fixed Enclosure Services SPC-4 SCSI device ses0: Serial Number 57434334453056594A4C4A4A ses0: 40.000MB/s transfers ses0: SCSI-3 ENC Device When booting with it connected to a USB 3 port, this is what is output: xhci0: XHCI (generic) USB 3.0 controller mem 0xfeafe000-0xfeaf irq 18 at device 0.0 on pci3 xhci0: 64 bytes context size, 64-bit DMA usbus0 on xhci0 [[...]] ohci0: AMD SB7x0/SB8x0/SB9x0 USB controller mem 0xfe7fe000-0xfe7fefff irq 16 at device 18.0 on pci0 usbus1 on ohci0 ohci1: AMD SB7x0/SB8x0/SB9x0 USB controller mem 0xfe7fd000-0xfe7fdfff irq 16 at device 18.1 on pci0 usbus2 on ohci1 ehci0: AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller mem 0xfe7ff800-0xfe7ff8ff irq 17 at device 18.2 on pci0 usbus3: EHCI version 1.0 usbus3 on ehci0 ohci2: AMD SB7x0/SB8x0/SB9x0 USB controller mem 0xfe7fc000-0xfe7fcfff irq 18 at device 19.0 on pci0 usbus4 on ohci2 ohci3: AMD SB7x0/SB8x0/SB9x0 USB controller mem 0xfe7f7000-0xfe7f7fff irq 18 at device 19.1 on pci0 usbus5 on ohci3 ehci1: AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller mem 0xfe7ff400-0xfe7ff4ff irq 19 at device 19.2 on pci0 usbus6: EHCI version 1.0 usbus6 on ehci1 [[...]] ohci4: AMD SB7x0/SB8x0/SB9x0 USB controller mem 0xfe7f6000-0xfe7f6fff irq 18 at device 20.5 on pci0 usbus7 on ohci4 [[...]] usbus0: 5.0Gbps Super Speed USB v3.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 480Mbps High Speed USB v2.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 12Mbps Full Speed USB v1.0 usbus6: 480Mbps High Speed USB v2.0 usbus7: 12Mbps Full Speed USB v1.0 ugen7.1: ATI at usbus7 uhub0: ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1 on usbus7 ugen6.1: ATI at usbus6 uhub1: ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1 on usbus6 ugen5.1: ATI at usbus5 uhub2: ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1 on usbus5 ugen4.1: ATI at usbus4 uhub3: ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1 on usbus4 ugen3.1: ATI at usbus3 uhub4: ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1 on usbus3 ugen2.1: ATI at usbus2 uhub5: ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1 on usbus2 ugen1.1: ATI at usbus1 uhub6: ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1 on usbus1 ugen0.1: 0x1912 at usbus0 uhub7: 0x1912 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1 on usbus0 uhub0: 2 ports with 2 removable, self powered uhub2: 3 ports with 3 removable, self powered uhub3: 3 ports with 3 removable, self powered uhub5: 3 ports with 3 removable, self powered uhub6: 3 ports with 3 removable, self powered uhub7: 8 ports with 8 removable, self powered [[...]] Root mount waiting for: usbus6 usbus3 usbus0 Root mount waiting for: usbus6 usbus3 usbus0 uhub1: 6 ports with 6 removable, self powered uhub4: 6 ports with 6 removable, self powered ugen0.2: vendor 0x1058 at usbus0 umass0: vendor 0x1058 product 0x1230, class 0/0, rev 3.00/10.65, addr 1 on usbus0 umass0: SCSI over Bulk-Only; quirks = 0x8000 Root mount waiting for: usbus0 [[...]] Root mount waiting for: usbus0 Root mount waiting for: usbus0 umass0: Get Max Lun not supported (USB_ERR_TIMEOUT) umass0:9:0:-1: Attached to scbus9 [[...]] da0 at umass-sim0 bus 0 scbus9 target 0 lun 0 da0:Fixed Direct Access SCSI device da0: Serial Number WCC4E0VYJLJJ da0: 400.000MB/s transfers da0: 3815415MB (976746240 4096 byte sectors: 255H 63S/T 60799C) da0: quirks=0x2NO_6_BYTE This external USB drive works fine under OSX Yosemite and also when plugged in to my Raspberry Pi 2 running OSMC. Is there anyone using this model of USB drive under FreeBSD/amd64 10.2? Is it a matter of finding the correct quirk to get it working? Cheers, Paul. ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to freebsd-stable-unsubscr...@freebsd.org
Re: 4TB Western Digital My Book 1230 USB hard drive not working on 10.2
On 08/02/2015 21:22, Paul Mather wrote: I have a 4TB external USB drive (Western Digital My Book 1230) that I am trying to use under FreeBSD/amd64 10.2 (10.2-PRERELEASE #0 r286052: Wed Jul 29 20:59:39 EDT 2015). This system has a MSI 760GMA-P34 (FX) motherboard. The drive probes unreliably when plugged in to a USB 3 port. It reliably probes when plugged into a USB 2 port. However, it works in neither cases. Attempting to dd from the drive results in a dd: /dev/da0: Invalid argument. When plugged in to a USB 2 port, this is how the drive is probed: ugen6.2: Western Digital at usbus6 umass0: Western Digital My Book 1230, class 0/0, rev 2.10/10.65, addr 2 on usbus6 umass0: SCSI over Bulk-Only; quirks = 0xc001 umass0:9:0:-1: Attached to scbus9 da0 at umass-sim0 bus 0 scbus9 target 0 lun 0 da0: WD My Book 1230 1065 Fixed Direct Access SPC-4 SCSI device da0: Serial Number 57434334453056594A4C4A4A da0: 40.000MB/s transfers da0: 3815415MB (976746240 4096 byte sectors: 255H 63S/T 60799C) da0: quirks=0x2NO_6_BYTE ses0 at umass-sim0 bus 0 scbus9 target 0 lun 1 ses0: WD SES Device 1065 Fixed Enclosure Services SPC-4 SCSI device ses0: Serial Number 57434334453056594A4C4A4A ses0: 40.000MB/s transfers ses0: SCSI-3 ENC Device When booting with it connected to a USB 3 port, this is what is output: xhci0: XHCI (generic) USB 3.0 controller mem 0xfeafe000-0xfeaf irq 18 at device 0.0 on pci3 xhci0: 64 bytes context size, 64-bit DMA usbus0 on xhci0 [[...]] ohci0: AMD SB7x0/SB8x0/SB9x0 USB controller mem 0xfe7fe000-0xfe7fefff irq 16 at device 18.0 on pci0 usbus1 on ohci0 ohci1: AMD SB7x0/SB8x0/SB9x0 USB controller mem 0xfe7fd000-0xfe7fdfff irq 16 at device 18.1 on pci0 usbus2 on ohci1 ehci0: AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller mem 0xfe7ff800-0xfe7ff8ff irq 17 at device 18.2 on pci0 usbus3: EHCI version 1.0 usbus3 on ehci0 ohci2: AMD SB7x0/SB8x0/SB9x0 USB controller mem 0xfe7fc000-0xfe7fcfff irq 18 at device 19.0 on pci0 usbus4 on ohci2 ohci3: AMD SB7x0/SB8x0/SB9x0 USB controller mem 0xfe7f7000-0xfe7f7fff irq 18 at device 19.1 on pci0 usbus5 on ohci3 ehci1: AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller mem 0xfe7ff400-0xfe7ff4ff irq 19 at device 19.2 on pci0 usbus6: EHCI version 1.0 usbus6 on ehci1 [[...]] ohci4: AMD SB7x0/SB8x0/SB9x0 USB controller mem 0xfe7f6000-0xfe7f6fff irq 18 at device 20.5 on pci0 usbus7 on ohci4 [[...]] usbus0: 5.0Gbps Super Speed USB v3.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 480Mbps High Speed USB v2.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 12Mbps Full Speed USB v1.0 usbus6: 480Mbps High Speed USB v2.0 usbus7: 12Mbps Full Speed USB v1.0 ugen7.1: ATI at usbus7 uhub0: ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1 on usbus7 ugen6.1: ATI at usbus6 uhub1: ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1 on usbus6 ugen5.1: ATI at usbus5 uhub2: ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1 on usbus5 ugen4.1: ATI at usbus4 uhub3: ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1 on usbus4 ugen3.1: ATI at usbus3 uhub4: ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1 on usbus3 ugen2.1: ATI at usbus2 uhub5: ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1 on usbus2 ugen1.1: ATI at usbus1 uhub6: ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1 on usbus1 ugen0.1: 0x1912 at usbus0 uhub7: 0x1912 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1 on usbus0 uhub0: 2 ports with 2 removable, self powered uhub2: 3 ports with 3 removable, self powered uhub3: 3 ports with 3 removable, self powered uhub5: 3 ports with 3 removable, self powered uhub6: 3 ports with 3 removable, self powered uhub7: 8 ports with 8 removable, self powered [[...]] Root mount waiting for: usbus6 usbus3 usbus0 Root mount waiting for: usbus6 usbus3 usbus0 uhub1: 6 ports with 6 removable, self powered uhub4: 6 ports with 6 removable, self powered ugen0.2: vendor 0x1058 at usbus0 umass0: vendor 0x1058 product 0x1230, class 0/0, rev 3.00/10.65, addr 1 on usbus0 umass0: SCSI over Bulk-Only; quirks = 0x8000 Root mount waiting for: usbus0 [[...]] Root mount waiting for: usbus0 Root mount waiting for: usbus0 umass0: Get Max Lun not supported (USB_ERR_TIMEOUT) umass0:9:0:-1: Attached to scbus9 [[...]] da0 at umass-sim0 bus 0 scbus9 target 0 lun 0 da0:Fixed Direct Access SCSI device da0: Serial Number WCC4E0VYJLJJ da0: 400.000MB/s transfers da0: 3815415MB (976746240 4096 byte sectors: 255H 63S/T 60799C) da0: quirks=0x2NO_6_BYTE This external USB drive works fine under OSX Yosemite and also when plugged in to my Raspberry Pi 2 running OSMC. Is there anyone using this model of USB drive under FreeBSD/amd64 10.2? Is it a matter of finding the correct quirk to get it working? Cheers, Paul. The trouble detecting is probably related to https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=196332 I have trouble with my 2T WD My passport but I
