re(4) can't receive some multicast ?
Hi, I have ASUS P5B, running FreeBSD 6.2-STABLE. It has on-board re(4) as follows, re0: RealTek 8168/8111B PCIe Gigabit Ethernet port 0xa800-0xa8ff mem 0xfe9ff000-0xfe9f irq 19 at device 0.0 on pci3 miibus1: MII bus on re0 rgephy0: RTL8169S/8110S media interface on miibus1 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto re0: Ethernet address: 00:1a:92:6e:f2:a5 re0: [FAST] pciconf -lv [EMAIL PROTECTED]:0:0: class=0x02 card=0x81aa1043 chip=0x816810ec rev=0x01 hdr=0x00 vendor = 'Realtek Semiconductor' class = network subclass = ethernet # ifconfig re0 re0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST mtu 1500 options=1bRXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING inet6 fe80::21a:92ff:fe6e:f2a5%re0 prefixlen 64 scopeid 0x2 inet 172.19.3.78 netmask 0x broadcast 172.19.255.255 ether 00:1a:92:6e:f2:a5 media: Ethernet autoselect (1000baseTX full-duplex) status: active # sysctl net.inet6.ip6.accept_rtadv net.inet6.ip6.accept_rtadv: 1 # rtsol -d re0 checking if re0 is ready... re0 is ready send RS on re0, whose state is 2 send RS on re0, whose state is 2 send RS on re0, whose state is 2 No answer after sending 3 RSs stop timer for re0 there is no timer It seems re0 can't receive IPv6 RA message. But in promisc mode(running tcpdump on another terminal), it receives RA. # ifconfig re0 re0: flags=8943UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST mtu 1500 options=1bRXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING inet6 fe80::21a:92ff:fe6e:f2a5%re0 prefixlen 64 scopeid 0x2 inet 172.19.3.78 netmask 0x broadcast 172.19.255.255 ether 00:1a:92:6e:f2:a5 media: Ethernet autoselect (1000baseTX full-duplex) status: active # rtsol -d re0 checking if re0 is ready... re0 is ready send RS on re0, whose state is 2 received RA from fe80::230:48ff:fe81:e3fd on re0, state is 2 stop timer for re0 there is no timer # ifconfig re0 re0: flags=8943UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST mtu 1500 options=1bRXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING inet6 fe80::21a:92ff:fe6e:f2a5%re0 prefixlen 64 scopeid 0x2 inet 172.19.3.78 netmask 0x broadcast 172.19.255.255 inet6 2001:240:c4:1:21a:92ff:fe6e:f2a5 prefixlen 64 autoconf ether 00:1a:92:6e:f2:a5 media: Ethernet autoselect (1000baseTX full-duplex) status: active Any suggestions? Regards, ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: re(4) can't receive some multicast ?
From: FUJITA Kazutoshi [EMAIL PROTECTED] Subject: re(4) can't receive some multicast ? Date: Fri, 06 Apr 2007 20:01:05 +0900 (JST) I have ASUS P5B, running FreeBSD 6.2-STABLE. It has on-board re(4) as follows, It seems re0 can't receive IPv6 RA message. But in promisc mode(running tcpdump on another terminal), it receives RA. Sorry, this is known problem. -CURRENT re(4) handles variant and it works fine for me. Regards, ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: vinum.autostart problem
From: Jon Noack [EMAIL PROTECTED] Subject: Re: vinum.autostart problem Date: Tue, 01 Feb 2005 20:00:21 -0600 Message-ID: [EMAIL PROTECTED] Can you mirror the root partition with regular vinum on 5-STABLE, or does this require gvinum? gvinum makes me happy;-) thanks. Regards, ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to [EMAIL PROTECTED]
vinum.autostart problem
Hi, I'm using recent 5-STABLE, and try to mirror root partition with vinum. my /boot/loader.conf is below vinum_load=YES vinum.autostart=YES But I got following message when boot ... vinum: loaded vinum: no drives found Mounting root from ufs:/dev/vinum/root setrootbyname failed ffs_mountroot: can't find rootvp Root mount failed: 6 ... I think vinum is not auto-started. Any suggestion? Regards, ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: vr interface...
From: Serge V. Panchencko [EMAIL PROTECTED] Subject: vr interface... Date: Wed, 25 Jul 2001 19:48:35 +0600 Message-ID: [EMAIL PROTECTED] I've changed my old FreeBSD box (2.2.8-S/P-166/2xD-Link EhetrNICs) to new 4.3-R/Cel733/2xD-Link PCI EtherNICs and I'm having throubles: when hight load on vr0 interfaces, this interface stopped for 1..5 min... I have another NIC which probed as vr0, and have same problem. -- my dmesg -- ... snip vr0: VIA VT6102 Rhine II 10/100BaseTX port 0xa800-0xa8ff mem 0xec80-0xec80 00ff irq 9 at device 11.0 on pci0 vr0: Ethernet address: 00:90:99:22:e0:14 miibus0: MII bus on vr0 acphy0: AC101 10/100 media interface on miibus0 acphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ... snip vr0: watchdog timeout Regards, To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-stable in the body of the message
