Re: Marvell 8053 support?
On 1/10/07, Bruce A. Mah [EMAIL PROTECTED] wrote: If memory serves me right, LI Xin wrote: Not sure if the snapshot contained the changes, though... IIRC the January snapshot is not released yet? The January CURRENT snapshots are being built and uploaded now. The mirrors might have some of the architectures, but an announcement will come only after everything's been uploaded (and had a little while to propagate). I just booted the january/amd64 snapshot ISO and it detects it fine: pcib3: ACPI PCI-PCI bridge irq 16 at device 28.4 on pci0 pcib3: secondary bus 3 pcib3: subordinate bus 3 pcib3: I/O decode0x9000-0x9fff pcib3: memory decode 0xf900-0xfaff pcib3: no prefetched decode pci3: ACPI PCI bus on pcib3 pci3: physical bus=3 found- vendor=0x11ab, dev=0x4362, revid=0x22 bus=3, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 VPD Ident: Marvell Yukon 88E8053 Gigabit Ethernet Controller PN: Yukon 88E8053 EC: Rev. 2.2 MN: Marvell SN: AbCdEfG83CD03 CP: id 1, BAR16, off 0x3cc RV: 0x6c MSI supports 2 messages, 64 bit map[10]: type 1, range 64, base 0xfa00, size 14, enabled pcib3: requested memory range 0xfa00-0xfa003fff: good map[18]: type 4, range 32, base 0x9000, size 8, enabled pcib3: requested I/O range 0x9000-0x90ff: in range pcib3: matched entry for 3.0.INTA pcib3: slot 0 INTA hardwired to IRQ 16 mskc0: Marvell Yukon 88E8053 Gigabit Ethernet port 0x9000-0x90ff mem 0xfa00-0xfa003fff irq 16 at device 0.0 on pci3 mskc0: Reserved 0x4000 bytes for rid 0x10 type 3 at 0xfa00 mskc0: MSI count : 2 mskc0: attempting to allocate 2 MSI vectors (2 supported) mskc0: using IRQs 258259 for MSI mskc0: RAM buffer size : 48KB mskc0: Port 0 : Rx Queue 32KB(0x:0x7fff) mskc0: Port 0 : Tx Queue 16KB(0x8000:0xbfff) msk0: Marvell Technology Group Ltd. Yukon EC Id 0xb6 Rev 0x02 on mskc0 msk0: bpf attached msk0: Ethernet address: 00:16:e6:83:cd:03 miibus0: MII bus on msk0 e1000phy0: Marvell 88E Gigabit PHY on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto mskc0: [MPSAFE] mskc0: [FAST] +++ Thanks. Bruce. cheers mars ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to [EMAIL PROTECTED]
Marvell 8053 support?
Greetz! I happen to play w/ a newish Gigabyte mobo that has an on-board Marvell 8053 GigE NIC. FreeBSD 6.2-BETA2 i386, amd64 does not seem to support it. Does anyone know if this is supported? I'm currently taking a look at http://people.freebsd.org/~yongari/msk/ , tho this NIC isnt mentioned there at all. Thanks! cheers mars ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Marvell 8053 support?
Mars G. Miro wrote: Greetz! I happen to play w/ a newish Gigabyte mobo that has an on-board Marvell 8053 GigE NIC. FreeBSD 6.2-BETA2 i386, amd64 does not seem to support it. Does anyone know if this is supported? I'm currently taking a look at http://people.freebsd.org/~yongari/msk/ , tho this NIC isnt mentioned there at all. A quick glance at msk(4) on -CURRENT shows that 88E8053 is supposed to work with it. Unfortunately it seems that it needs some KPIs that is only present in -HEAD so backporting is not trivial. Cheers, -- Xin LI [EMAIL PROTECTED] http://www.delphij.net/ FreeBSD - The Power to Serve! signature.asc Description: OpenPGP digital signature
Re: Marvell 8053 support?
On 1/9/07, LI Xin [EMAIL PROTECTED] wrote: Mars G. Miro wrote: Greetz! I happen to play w/ a newish Gigabyte mobo that has an on-board Marvell 8053 GigE NIC. FreeBSD 6.2-BETA2 i386, amd64 does not seem to support it. Does anyone know if this is supported? I'm currently taking a look at http://people.freebsd.org/~yongari/msk/ , tho this NIC isnt mentioned there at all. A quick glance at msk(4) on -CURRENT shows that 88E8053 is supposed to work with it. Unfortunately it seems that it needs some KPIs that is only present in -HEAD so backporting is not trivial. hmmm... downloading CURRENT snapshots now.. lesse if this works... The mobo is one of those 'solid-capacitor' mobos (just mentioned on /.) from Gigabyte http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ClassValue=MotherboardProductID=2295ProductName=GA-965P-DQ6 Thanks ;-) Cheers, -- Xin LI [EMAIL PROTECTED]http://www.delphij.net/ FreeBSD - The Power to Serve! cheers mars ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Marvell 8053 support?
Mars G. Miro wrote: On 1/9/07, LI Xin [EMAIL PROTECTED] wrote: Mars G. Miro wrote: Greetz! I happen to play w/ a newish Gigabyte mobo that has an on-board Marvell 8053 GigE NIC. FreeBSD 6.2-BETA2 i386, amd64 does not seem to support it. Does anyone know if this is supported? I'm currently taking a look at http://people.freebsd.org/~yongari/msk/ , tho this NIC isnt mentioned there at all. A quick glance at msk(4) on -CURRENT shows that 88E8053 is supposed to work with it. Unfortunately it seems that it needs some KPIs that is only present in -HEAD so backporting is not trivial. hmmm... downloading CURRENT snapshots now.. lesse if this works... The mobo is one of those 'solid-capacitor' mobos (just mentioned on /.) from Gigabyte http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ClassValue=MotherboardProductID=2295ProductName=GA-965P-DQ6 Not sure if the snapshot contained the changes, though... IIRC the January snapshot is not released yet? Cheers, -- Xin LI [EMAIL PROTECTED] http://www.delphij.net/ FreeBSD - The Power to Serve! signature.asc Description: OpenPGP digital signature
Re: Marvell 8053 support?
On 1/9/07, Mars G. Miro [EMAIL PROTECTED] wrote: On 1/9/07, LI Xin [EMAIL PROTECTED] wrote: Mars G. Miro wrote: Greetz! I happen to play w/ a newish Gigabyte mobo that has an on-board Marvell 8053 GigE NIC. FreeBSD 6.2-BETA2 i386, amd64 does not seem to support it. Does anyone know if this is supported? I'm currently taking a look at http://people.freebsd.org/~yongari/msk/ , tho this NIC isnt mentioned there at all. A quick glance at msk(4) on -CURRENT shows that 88E8053 is supposed to work with it. Unfortunately it seems that it needs some KPIs that is only present in -HEAD so backporting is not trivial. hmmm... downloading CURRENT snapshots now.. lesse if this works... The mobo is one of those 'solid-capacitor' mobos (just mentioned on /.) from Gigabyte http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ClassValue=MotherboardProductID=2295ProductName=GA-965P-DQ6 :Not sure if the snapshot contained the changes, though... IIRC the :January snapshot is not released yet? I'll take a stab at the ia64 ISO at ftp://ftp.freebsd.org/pub/FreeBSD/snapshots/200701/ tomorrow when da download finishes ... I'm also downloading da Nov 2006 i386/amd64 snapshots and plug in a separate NIC to update to -CURRENT just in case da ia64 ISO dont work. Thanks . :Cheers, :-- :Xin LI delphij at delphij.net http://www.delphij.net/ :FreeBSD - The Power to Serve! Thanks ;-) Cheers, -- Xin LI [EMAIL PROTECTED] http://www.delphij.net/ FreeBSD - The Power to Serve! cheers mars ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Marvell 8053 support?
If memory serves me right, LI Xin wrote: Not sure if the snapshot contained the changes, though... IIRC the January snapshot is not released yet? The January CURRENT snapshots are being built and uploaded now. The mirrors might have some of the architectures, but an announcement will come only after everything's been uploaded (and had a little while to propagate). Bruce. signature.asc Description: OpenPGP digital signature
Re: Marvell 8053 support?
Just so you don't waste your time downloading, IA64 := Itanium. I don't think you have one of those in your Gigabyte motherboard... unless you're REALLY good with a soldering gun! You should be using AMD64; term used to describe both Intel and AMD 64 bit x86 CPUs. On Wed, 2007-01-10 at 00:15 +0800, Mars G. Miro wrote: On 1/9/07, Mars G. Miro [EMAIL PROTECTED] wrote: On 1/9/07, LI Xin [EMAIL PROTECTED] wrote: Mars G. Miro wrote: Greetz! I happen to play w/ a newish Gigabyte mobo that has an on-board Marvell 8053 GigE NIC. FreeBSD 6.2-BETA2 i386, amd64 does not seem to support it. Does anyone know if this is supported? I'm currently taking a look at http://people.freebsd.org/~yongari/msk/ , tho this NIC isnt mentioned there at all. A quick glance at msk(4) on -CURRENT shows that 88E8053 is supposed to work with it. Unfortunately it seems that it needs some KPIs that is only present in -HEAD so backporting is not trivial. hmmm... downloading CURRENT snapshots now.. lesse if this works... The mobo is one of those 'solid-capacitor' mobos (just mentioned on /.) from Gigabyte http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ClassValue=MotherboardProductID=2295ProductName=GA-965P-DQ6 :Not sure if the snapshot contained the changes, though... IIRC the :January snapshot is not released yet? I'll take a stab at the ia64 ISO at ftp://ftp.freebsd.org/pub/FreeBSD/snapshots/200701/ tomorrow when da download finishes ... I'm also downloading da Nov 2006 i386/amd64 snapshots and plug in a separate NIC to update to -CURRENT just in case da ia64 ISO dont work. Thanks . :Cheers, :-- :Xin LI delphij at delphij.net http://www.delphij.net/ :FreeBSD - The Power to Serve! Thanks ;-) Cheers, -- Xin LI [EMAIL PROTECTED]http://www.delphij.net/ FreeBSD - The Power to Serve! cheers mars -- Christian Lopez de Castilla Wagner [EMAIL PROTECTED] [EMAIL PROTECTED] (+49-261)2079522 (+49-173)1030695 PGP Keys: 98FC0D41 483EA9B6 (Old) ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to [EMAIL PROTECTED]
