Proliant 380 G4
Hi! Just a quick check - a client is getting a Proliant 380 G4 with a 6i Raid controller. Haven't used this hardware before. Will it work fine with FreeBSD? Which version will work best, 5.4 or 4.11? Any peculiarities or things to think about? Any input appreciated! Thanks Palle ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Proliant 380 G4
On Wed, Jun 15, 2005 at 06:03:31PM +0200, Palle Girgensohn wrote: Hi! Just a quick check - a client is getting a Proliant 380 G4 with a 6i Raid controller. Haven't used this hardware before. Will it work fine with FreeBSD? Which version will work best, 5.4 or 4.11? Any peculiarities or things to think about? Any input appreciated! Thanks Palle I run 5.3-Release on my DL380g3 with a SmartArray 6402, which is basicly the same controller as the 6i (just not embedded, it is a PCI-X card). No problems whatsoever. -- Regards, Ulf. - Ulf Zimmermann, 1525 Pacific Ave., Alameda, CA-94501, #: 510-865-0204 You can find my resume at: http://seven.Alameda.net/~ulf/resume.html ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Proliant 380 G4
On Wed, Jun 15, 2005 at 06:03:31PM +0200, Palle Girgensohn wrote: Hi! Just a quick check - a client is getting a Proliant 380 G4 with a 6i Raid controller. Haven't used this hardware before. Will it work fine with FreeBSD? Which version will work best, 5.4 or 4.11? Any peculiarities or things to think about? The card is listed as supported in the ciss(4) manpage. - Christian -- Christian Brueffer [EMAIL PROTECTED] [EMAIL PROTECTED] GPG Key: http://people.freebsd.org/~brueffer/brueffer.key.asc GPG Fingerprint: A5C8 2099 19FF AACA F41B B29B 6C76 178C A0ED 982D pgptFW9Fbb9bm.pgp Description: PGP signature
Re: Proliant 380 G4
Palle Girgensohn [EMAIL PROTECTED] wrote: Just a quick check - a client is getting a Proliant 380 G4 with a 6i Raid controller. Haven't used this hardware before. Will it work fine with FreeBSD? Which version will work best, 5.4 or 4.11? Any peculiarities or things to think about? Any input appreciated! It's not supported under 4.x: pci2: unknown card (vendor=0x0e11, dev=0x0046) at 1.0 irq 5 At a customer of ours we're currently forced to run Linux on the newer Proliants because of that problem (FreeBSD 5.x is currently not an option for that customer). Best regards Oliver -- Oliver Fromme, secnetix GmbH Co KG, Oettingenstr. 2, 80538 München Any opinions expressed in this message may be personal to the author and may not necessarily reflect the opinions of secnetix in any way. [...] one observation we can make here is that Python makes an excellent pseudocoding language, with the wonderful attribute that it can actually be executed. -- Bruce Eckel ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Proliant 380 G4
Palle Girgensohn a écrit : Hi! Just a quick check - a client is getting a Proliant 380 G4 with a 6i Raid controller. Haven't used this hardware before. Will it work fine with FreeBSD? Which version will work best, 5.4 or 4.11? Any peculiarities or things to think about? Any input appreciated! we have 3 Proliant 380 G4 and hardware works fine. For your information, I attach a dmesg of one of them. I've just another problem, but I don't think that it comes from hardware : http://lists.freebsd.org/pipermail/freebsd-stable/2005-June/015952.html Thanks Palle -- Philippe PEGON Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.4-STABLE #3: Thu May 19 20:35:36 CEST 2005 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/NS1A Timecounter i8254 frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(TM) CPU 3.60GHz (3600.15-MHz 686-class CPU) Origin = GenuineIntel Id = 0xf41 Stepping = 1 Features=0xbfebfbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE Hyperthreading: 2 logical CPUs real memory = 2147430400 (2047 MB) avail memory = 2095968256 (1998 MB) ACPI APIC Table: HP 0083 FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 6 ioapic0 Version 2.0 irqs 0-23 on motherboard ioapic1 Version 2.0 irqs 24-47 on motherboard ioapic2 Version 2.0 irqs 48-71 on motherboard ioapic3 Version 2.0 irqs 72-95 on motherboard ioapic4 Version 2.0 irqs 96-119 on motherboard npx0: math processor on motherboard npx0: INT 16 interface acpi0: HP P51 on motherboard acpi0: Power Button (fixed) Timecounter ACPI-safe frequency 3579545 Hz quality 1000 acpi_timer0: 24-bit timer at 3.579545MHz port 0x908-0x90b on acpi0 cpu0: ACPI CPU on acpi0 cpu1: ACPI CPU on acpi0 pcib0: ACPI Host-PCI bridge on acpi0 pci0: ACPI PCI bus on pcib0 pcib1: ACPI PCI-PCI bridge at device 2.0 on pci0 pci2: ACPI PCI bus on pcib1 pcib2: ACPI PCI-PCI bridge at device 0.0 on pci2 pci3: ACPI PCI bus on pcib2 bge0: Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2100 mem 0xfdef-0xfdef irq 25 at device 1.0 on pci3 miibus0: MII bus on bge0 brgphy0: BCM5704 10/100/1000baseTX PHY on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge0: Ethernet address: 00:12:79:d8:a0:37 bge1: Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2100 mem 0xfdee-0xfdee irq 26 at device 1.1 on pci3 miibus1: MII bus on bge1 brgphy1: BCM5704 10/100/1000baseTX PHY on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge1: Ethernet address: 00:12:79:d8:a0:36 pcib3: ACPI PCI-PCI bridge at device 0.2 on pci2 pci4: ACPI PCI bus on pcib3 ciss0: HP Smart Array 6i port 0x4000-0x40ff mem 0xfdf8-0xfdfb,0xfdff-0xfdff1fff irq 51 at device 3.0 on pci4 pcib4: ACPI PCI-PCI bridge at device 6.0 on pci0 pci5: ACPI PCI bus on pcib4 pcib5: ACPI PCI-PCI bridge at device 0.0 on pci5 pci6: ACPI PCI bus on pcib5 pcib6: ACPI PCI-PCI bridge at device 0.2 on pci5 pci10: ACPI PCI bus on pcib6 uhci0: Intel 82801EB (ICH5) USB controller USB-A port 0x2000-0x201f irq 16 at device 29.0 on pci0 usb0: Intel 82801EB (ICH5) USB controller USB-A on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: Intel 82801EB (ICH5) USB controller USB-B port 0x2020-0x203f irq 19 at device 29.1 on pci0 usb1: Intel 82801EB (ICH5) USB controller USB-B on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: Intel 82801EB (ICH5) USB controller USB-C port 0x2040-0x205f irq 18 at device 29.2 on pci0 usb2: Intel 82801EB (ICH5) USB controller USB-C on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: Intel 82801EB (ICH5) USB controller USB-D port 0x2060-0x207f irq 16 at device 29.3 on pci0 usb3: Intel 82801EB (ICH5) USB controller USB-D on uhci3 usb3: USB revision 1.0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered pci0: serial bus, USB at device 29.7 (no driver attached) pcib7: ACPI PCI-PCI bridge at device 30.0 on pci0 pci1: ACPI PCI bus on pcib7 pci1: display, VGA at device 3.0 (no driver attached) pci1: base peripheral at device 4.0 (no driver attached) pci1: base peripheral at device 4.2 (no driver attached) isab0: PCI-ISA bridge at device 31.0 on pci0 isa0: ISA bus on isab0 atapci0: Intel ICH5 UDMA100 controller port 0x500-0x50f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 acpi_tz0: Thermal Zone on acpi0 atkbdc0: Keyboard
Re: Proliant 380 G4
The 6i controller support is included in 4.11, so if you want to go with 4.x family, 4.11 is your best bet. I am also running 5.3 and 5.4 on G4s without any problem. -- Babak Farrokhi On 6/15/05, Philippe PEGON [EMAIL PROTECTED] wrote: Palle Girgensohn a écrit : Hi! Just a quick check - a client is getting a Proliant 380 G4 with a 6i Raid controller. Haven't used this hardware before. Will it work fine with FreeBSD? Which version will work best, 5.4 or 4.11? Any peculiarities or things to think about? Any input appreciated! we have 3 Proliant 380 G4 and hardware works fine. For your information, I attach a dmesg of one of them. I've just another problem, but I don't think that it comes from hardware : http://lists.freebsd.org/pipermail/freebsd-stable/2005-June/015952.html Thanks Palle -- Philippe PEGON Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.4-STABLE #3: Thu May 19 20:35:36 CEST 2005 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/NS1A Timecounter i8254 frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(TM) CPU 3.60GHz (3600.15-MHz 686-class CPU) Origin = GenuineIntel Id = 0xf41 Stepping = 1 Features=0xbfebfbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE Hyperthreading: 2 logical CPUs real memory = 2147430400 (2047 MB) avail memory = 2095968256 (1998 MB) ACPI APIC Table: HP 0083 FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 6 ioapic0 Version 2.0 irqs 0-23 on motherboard ioapic1 Version 2.0 irqs 24-47 on motherboard ioapic2 Version 2.0 irqs 48-71 on motherboard ioapic3 Version 2.0 irqs 72-95 on motherboard ioapic4 Version 2.0 irqs 96-119 on motherboard npx0: math processor on motherboard npx0: INT 16 interface acpi0: HP P51 on motherboard acpi0: Power Button (fixed) Timecounter ACPI-safe frequency 3579545 Hz quality 1000 acpi_timer0: 24-bit timer at 3.579545MHz port 0x908-0x90b on acpi0 cpu0: ACPI CPU on acpi0 cpu1: ACPI CPU on acpi0 pcib0: ACPI Host-PCI bridge on acpi0 pci0: ACPI PCI bus on pcib0 pcib1: ACPI PCI-PCI bridge at device 2.0 on pci0 pci2: ACPI PCI bus on pcib1 pcib2: ACPI PCI-PCI bridge at device 0.0 on pci2 pci3: ACPI PCI bus on pcib2 bge0: Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2100 mem 0xfdef-0xfdef irq 25 at device 1.0 on pci3 miibus0: MII bus on bge0 brgphy0: BCM5704 10/100/1000baseTX PHY on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge0: Ethernet address: 00:12:79:d8:a0:37 bge1: Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2100 mem 0xfdee-0xfdee irq 26 at device 1.1 on pci3 miibus1: MII bus on bge1 brgphy1: BCM5704 10/100/1000baseTX PHY on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge1: Ethernet address: 00:12:79:d8:a0:36 pcib3: ACPI PCI-PCI bridge at device 0.2 on pci2 pci4: ACPI PCI bus on pcib3 ciss0: HP Smart Array 6i port 0x4000-0x40ff mem 0xfdf8-0xfdfb,0xfdff-0xfdff1fff irq 51 at device 3.0 on pci4 pcib4: ACPI PCI-PCI bridge at device 6.0 on pci0 pci5: ACPI PCI bus on pcib4 pcib5: ACPI PCI-PCI bridge at device 0.0 on pci5 pci6: ACPI PCI bus on pcib5 pcib6: ACPI PCI-PCI bridge at device 0.2 on pci5 pci10: ACPI PCI bus on pcib6 uhci0: Intel 82801EB (ICH5) USB controller USB-A port 0x2000-0x201f irq 16 at device 29.0 on pci0 usb0: Intel 82801EB (ICH5) USB controller USB-A on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: Intel 82801EB (ICH5) USB controller USB-B port 0x2020-0x203f irq 19 at device 29.1 on pci0 usb1: Intel 82801EB (ICH5) USB controller USB-B on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: Intel 82801EB (ICH5) USB controller USB-C port 0x2040-0x205f irq 18 at device 29.2 on pci0 usb2: Intel 82801EB (ICH5) USB controller USB-C on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: Intel 82801EB (ICH5) USB controller USB-D port 0x2060-0x207f irq 16 at device 29.3 on pci0 usb3: Intel 82801EB (ICH5) USB controller USB-D on uhci3 usb3: USB revision 1.0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered pci0: serial bus, USB at device 29.7 (no driver attached) pcib7: ACPI PCI-PCI bridge at device 30.0 on pci0 pci1: ACPI PCI bus on pcib7 pci1: display, VGA at device 3.0 (no driver attached) pci1: base peripheral at device 4.0 (no driver
