Re: gvinum: adding plex and subdisks to existing volume panic
On Thu, 22 Dec 2005, Ludo Koren wrote:
Fatal trap 12: page fault while in kernel mode
fault virtual address = 0x40
fault code = supervisor read, page not present
instruction pointer = 0x8:0xc07339c9
stack pointer = 0x10:0xe5f9e840
frame pointer = 0x10:0xe5f9e848
code segment= base 0x0, limit 0xf, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags= interrupt enabled, resume, IOPL = 0
current process = 2 (g_event)
trap number = 12
panic: page fault
Uptime: 2m32s
Dumping 1022 MB
16 32 48 64 80 96 112 128 144 160 176 192 208 224 240 256 272 288 304 320 336
352 368 384 400 416 432 448 464 480 496 512 528 544 560 576 592 608 624 640 656
672 688 704 720 736 752 768 784 800 816 832 848 864 880 896 912 928 944 960 976
992 1008
#0 doadump () at pcpu.h:160
160 pcpu.h: No such file or directory.
in pcpu.h
(kgdb) add-symbol-file /usr/src/sys/modules/geom/geom_vinum/geom_vinum.ko
0xc072 a9b8
add symbol table from file /usr/src/sys/modules/geom/geom_vinum/geom_vinum.ko
at
.text_addr = 0xc072a9b8
(y or n) y
Reading symbols from /usr/src/sys/modules/geom/geom_vinum/geom_vinum.ko...done.
(kgdb) bt
#0 doadump () at pcpu.h:160
#1 0xc04eaf44 in boot (howto=260) at /usr/src/sys/kern/kern_shutdown.c:412
#2 0xc04eb1d8 in panic (fmt=0xc060fcbc %s)
at /usr/src/sys/kern/kern_shutdown.c:568
#3 0xc05ec2f0 in trap_fatal (frame=0xe5f9e800, eva=64)
at /usr/src/sys/i386/i386/trap.c:822
#4 0xc05ec057 in trap_pfault (frame=0xe5f9e800, usermode=0, eva=64)
at /usr/src/sys/i386/i386/trap.c:737
#5 0xc05ebcb9 in trap (frame=
{tf_fs = -1040646120, tf_es = -1037893616, tf_ds = -1038024688, tf_edi =
-1038012416, tf_esi = 0, tf_ebp = -436606904, tf_isp = -436606932, tf_ebx =
-1038077952, tf_edx = 1, tf_ecx = -1066995504, tf_eax = 0, tf_trapno = 12,
tf_err = 0, tf_eip = -1066190391, tf_cs = 8, tf_eflags = 66182, tf_esp =
-1038077952, tf_ss = -1038516864}) at /usr/src/sys/i386/i386/trap.c:427
#6 0xc05dc52a in calltrap () at /usr/src/sys/i386/i386/exception.s:140
#7 0xc1f90018 in ?? ()
#8 0xc2230010 in ?? ()
#9 0xc2210010 in ?? ()
I'm afraid that doesn't help me, either, as you can see there's no
debugging information in there (the ?? question marks should be
function calls actually).
Apparently there's a NULL pointer deref somewhere, I'll try to track it
down on my own.
Thanks,
le
--
Lukas Ertl http://homepage.univie.ac.at/l.ertl/
[EMAIL PROTECTED] http://people.freebsd.org/~le/
___
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: gvinum: adding plex and subdisks to existing volume panic
Lukas Ertl [EMAIL PROTECTED] writes: I'm afraid that doesn't help me, either, as you can see there's no debugging information in there (the ?? question marks should be function calls actually). Apparently there's a NULL pointer deref somewhere, I'll try to track it down on my own. Is there a way how can I help you (probably the question marks - source is from another module ) or something else ? lk ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: gvinum: adding plex and subdisks to existing volume panic
Unfortunately, that doesn't help me at all, since there's no debugging info. Have a look at http://www.freebsd.org/doc/en_US.ISO8859-1/books/developers-handbook/kerneldebug-kld.html. sorry I realized it late... Here is the info: Script started on Thu Dec 22 12:25:56 2005 501 gw|/var/crashkgdb /usr/obj/usr/src/sys/INTIME/kernel.debug vmcore.17 [GDB will not be able to debug user-mode threads: /usr/lib/libthread_db.so: Undefined symbol ps_pglobal_lookup] GNU gdb 6.1.1 [FreeBSD] Copyright 2004 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type show copying to see the conditions. There is absolutely no warranty for GDB. Type show warranty for details. This GDB was configured as i386-marcel-freebsd. Unread portion of the kernel message buffer: Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.4-STABLE #0: Thu Dec 22 10:41:32 CET 2005 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/INTIME ACPI APIC Table: INTEL D845GBV Timecounter i8254 frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) 4 CPU 1.60GHz (1599.96-MHz 686-class CPU) Origin = GenuineIntel Id = 0xf12 Stepping = 2 Features=0x3febfbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM real memory = 1071906816 (1022 MB) avail memory = 1042771968 (994 MB) ioapic0: Changing APIC ID to 1 ioapic0 Version 2.0 irqs 0-23 on motherboard netsmb_dev: loaded npx0: math processor on motherboard npx0: INT 16 interface acpi0: INTEL D845GBV on motherboard acpi0: Power Button (fixed) Timecounter ACPI-fast frequency 3579545 Hz quality 1000 acpi_timer0: 24-bit timer at 3.579545MHz port 0x408-0x40b on acpi0 cpu0: ACPI CPU on acpi0 acpi_throttle0: ACPI CPU Throttling on cpu0 pcib0: ACPI Host-PCI bridge port 0xcf8-0xcff on acpi0 pci0: ACPI PCI bus on pcib0 agp0: Intel 82845G (845G GMCH) SVGA controller mem 0xffa8-0xffaf,0xf000-0xf7ff irq 16 at device 2.0 on pci0 agp0: detected 892k stolen memory agp0: aperture size is 128M uhci0: Intel 82801DB (ICH4) USB controller USB-A port 0xe800-0xe81f irq 16 at device 29.0 on pci0 usb0: Intel 82801DB (ICH4) USB controller USB-A on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: Intel 82801DB (ICH4) USB controller USB-B port 0xe880-0xe89f irq 19 at device 29.1 on pci0 usb1: Intel 82801DB (ICH4) USB controller USB-B on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: Intel 82801DB (ICH4) USB controller USB-C port 0xec00-0xec1f irq 18 at device 29.2 on pci0 usb2: Intel 82801DB (ICH4) USB controller USB-C on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pci0: serial bus, USB at device 29.7 (no driver attached) pcib1: ACPI PCI-PCI bridge at device 30.0 on pci0 pci1: ACPI PCI bus on pcib1 ahd0: Adaptec 39320 Ultra320 SCSI adapter port 0xde00-0xdeff,0xd000-0xd0ff mem 0xff8fc000-0xff8fdfff irq 22 at device 1.0 on pci1 aic7902: Ultra320 Wide Channel A, SCSI Id=15, PCI 33 or 66Mhz, 512 SCBs ahd1: Adaptec 39320 Ultra320 SCSI adapter port 0xd400-0xd4ff,0xd800-0xd8ff mem 0xff8fe000-0xff8f irq 21 at device 1.1 on pci1 aic7902: Ultra320 Wide Channel B, SCSI Id=15, PCI 33 or 66Mhz, 512 SCBs fxp0: Intel 82801DB (ICH4) Pro/100 VE Ethernet port 0xdc00-0xdc3f mem 0xff8fb000-0xff8fbfff irq 20 at device 8.0 on pci1 miibus0: MII bus on fxp0 inphy0: i82562ET 10/100 media interface on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: Ethernet address: 00:03:47:ff:6e:9f isab0: PCI-ISA bridge at device 31.0 on pci0 isa0: ISA bus on isab0 atapci0: Intel ICH4 UDMA100 controller port 0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 pci0: serial bus, SMBus at device 31.3 (no driver attached) pci0: multimedia, audio at device 31.5 (no driver attached) acpi_button0: Sleep Button on acpi0 fdc0: floppy drive controller port 0x3f7,0x3f4-0x3f5,0x3f2-0x3f3,0x3f0-0x3f1 irq 6 drq 2 on acpi0 fd0: 1440-KB 3.5 drive on fdc0 drive 0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: 16550A-compatible COM port port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A ppc0: Standard parallel printer port port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppbus0: Parallel port bus on ppc0 plip0: PLIP network interface on ppbus0 lpt0: Printer on ppbus0 lpt0: Interrupt-driven port ppi0: Parallel I/O on ppbus0 atkbdc0: Keyboard
gvinum: adding plex and subdisks to existing volume panic
Hi, I'm using 5.4-STABLE. One of the mirrored disks died. I want to add new disk, which has not the same size as the died one. The output of the gvinum l is the following: # gvinum l 4 drives: D rd2 State: up /dev/da2s1h A: 0/1023 MB (0%) D d2State: up /dev/da2s1f A: 0/15452 MB (0%) D d3State: up /dev/da3s1A: 0/70001 MB (0%) D d4State: up /dev/da1s1A: 0/70001 MB (0%) 2 volumes: V root State: up Plexes: 1 Size: 1023 MB V usr State: up Plexes: 2 Size: 83 GB 4 plexes: P usr.p0 C State: down Subdisks: 1 Size: 68 GB P usr.p1 C State: up Subdisks: 2 Size: 83 GB P root.p1 C State: up Subdisks: 1 Size: 1023 MB P root.p0 C State: down Subdisks: 0 Size: 0 B 6 subdisks: S usr.p0.s0 State: down D: d1 Size: 15 GB S usr.p1.s0 State: up D: d2 Size: 15 GB S root.p1.s0State: up D: rd2 Size: 1023 MB S root.p0.s0State: down D: rd1 Size: 1023 MB S usr.p0.s1 State: up D: d3 Size: 68 GB S usr.p1.s1 State: up D: d4 Size: 68 GB and # camcontrol devlist -v scbus0 on ahd0 bus 0: SEAGATE ST373207LW 0004 at scbus0 target 3 lun 0 (pass0,da0) IBM IC35L073UWDY10-0 S25Fat scbus0 target 9 lun 0 (pass1,da1) HP C5683A C005 at scbus0 target 10 lun 0 (sa0,pass2) at scbus0 target -1 lun -1 () scbus1 on ahd1 bus 0: IBM IC35L018UWD210-0 S5BSat scbus1 target 1 lun 0 (pass3,da2) IBM IC35L073UWDY10-0 S23Cat scbus1 target 8 lun 0 (pass4,da3) at scbus1 target -1 lun -1 () scbus-1 on xpt0 bus 0: at scbus-1 target -1 lun -1 (xpt0) I want to have the whole new disk a one vinum slice so the # disklabel da0s1 # /dev/da0s1: 8 partitions: #size offsetfstype [fsize bsize bps/cpg] a: 143363700 2814.2BSD0 0 0 c: 1433639970unused0 0 # raw part, don't edit h: 143363981 16 vinum The old one was: # disklabel da2s1 # /dev/da2s1: 8 partitions: #size offsetfstype [fsize bsize bps/cpg] a: 2096855 2814.2BSD 2048 16384 0 b: 2097152 2097152 swap c: 358409520unused0 0 # raw part, don't edit f: 31646648 4194304 vinum h: 2097136 16 vinum When I try to do: # gvinum create gvinum.conf it ends up in immediate panic (page fault). The gvinum.conf file: drive d1b device /dev/da0s1h plex name usr.p2 org concat vol usr plex name root.p2 org concat vol root sd name root.p2.s0 drive d1b len 2096871s driveoffset 265s plex root.p2 plexoffset 0s sd name usr.p2.s0 drive d1b len 31646383s driveoffset 2097136s plex usr.p2 plexoffset 0s Am I doing something wrong? How can be added a new disk to existing mirror in gvinum? Any help appreciated, I cannot find useful hints. Regards, lk ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: gvinum: adding plex and subdisks to existing volume panic
On Wed, 21 Dec 2005, Ludo Koren wrote: When I try to do: # gvinum create gvinum.conf it ends up in immediate panic (page fault). The gvinum.conf file: It would be easier to track down this problem if you could provide the place where the panic happens or even better a backtrace. thanks, le -- Lukas Ertl http://homepage.univie.ac.at/l.ertl/ [EMAIL PROTECTED] http://people.freebsd.org/~le/ ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: gvinum: adding plex and subdisks to existing volume panic
Lukas Ertl == Lukas Ertl [EMAIL PROTECTED] writes: Lukas Ertl On Wed, 21 Dec 2005, Ludo Koren wrote: When I try to do: # gvinum create gvinum.conf it ends up in immediate panic (page fault). The gvinum.conf file: Lukas Ertl It would be easier to track down this problem if you Lukas Ertl could provide the place where the panic happens or Lukas Ertl even better a backtrace. # kgdb /usr/obj/usr/src/sys/GENERIC/kernel vmcore.15 [GDB will not be able to debug user-mode threads: /usr/lib/libthread_db.so: Undefined symbol ps_pglobal_lookup] GNU gdb 6.1.1 [FreeBSD] Copyright 2004 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type show copying to see the conditions. There is absolutely no warranty for GDB. Type show warranty for details. This GDB was configured as i386-marcel-freebsd. (no debugging symbols found)...Attempt to extract a component of a value that is not a structure pointer. (kgdb) (kgdb) (kgdb) bt #0 0xc0618252 in doadump () #1 0xc06187dc in boot () #2 0xc0618a70 in panic () #3 0xc07c82bc in trap_fatal () #4 0xc07c8023 in trap_pfault () #5 0xc07c7c65 in trap () #6 0xc07b7bba in calltrap () #7 0xc28d0018 in ?? () #8 0xc27b0010 in ?? () #9 0xc2760010 in ?? () #10 0xc2765800 in ?? () #11 0x in ?? () #12 0xe4db2848 in ?? () #13 0xe4db282c in ?? () #14 0xc26a8500 in ?? () #15 0x0001 in ?? () #16 0xc08e6ed0 in runq () #17 0x in ?? () #18 0x000c in ?? () #19 0x in ?? () #20 0xc09f38c5 in ?? () #21 0x0008 in ?? () #22 0x00010286 in ?? () #23 0xc26a8500 in ?? () #24 0xc261c280 in ?? () #25 0xe4db2ca0 in ?? () #26 0xc09eb422 in ?? () #27 0xc26a8500 in ?? () #28 0xc060eaa1 in free () Previous frame inner to this frame (corrupt stack?) (kgdb) ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: gvinum: adding plex and subdisks to existing volume panic
On Wed, 21 Dec 2005, Ludo Koren wrote: (kgdb) bt #0 0xc0618252 in doadump () #1 0xc06187dc in boot () #2 0xc0618a70 in panic () #3 0xc07c82bc in trap_fatal () #4 0xc07c8023 in trap_pfault () #5 0xc07c7c65 in trap () #6 0xc07b7bba in calltrap () #7 0xc28d0018 in ?? () #8 0xc27b0010 in ?? () Unfortunately, that doesn't help me at all, since there's no debugging info. Have a look at http://www.freebsd.org/doc/en_US.ISO8859-1/books/developers-handbook/kerneldebug-kld.html. thanks, le -- Lukas Ertl http://homepage.univie.ac.at/l.ertl/ [EMAIL PROTECTED] http://people.freebsd.org/~le/ ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to [EMAIL PROTECTED]
