Re: puc fails to attach serial ports
On Sun, Dec 11, 2005 at 06:22:40PM +, Gavin Atkinson wrote: G I'm trying to use puc(4) under RELENG_6 to attach the two serial ports on G a PCI card I have, but it's not working. It also fails under 6.0-RELEASE, G I don't have the ability to test earlier versions. G G The card is developed, but as far as I can see, no attempt is made to G attach the sio(4) devices below it. G G puc0: Dolphin Peripherals 4036 port 0x18c0-0x18df irq 25 at device 9.0 on G pci0 G puc0: Reserved 0x20 bytes for rid 0x10 type 4 at 0x18c0 G port rid 16 bst 0, start 18c0, end 18df G puc0: i 0, type sio, ressz 8, type 1 G puc: Using sio2 G puc: type 1, bar 10, offset 0 G puc0: i 1, type sio, ressz 8, type 1 G puc: Using sio3 G puc: type 1, bar 10, offset 8 G G Adding some printfs to the code, it turns out that device_probe_and_attach G around line 375 of sys/dev/puc/puc.c is returning 6. G G I have also added printfs to the probe and attach code of both the pci and G puc attachments of sio(4), and have determined that none of them get G called. G G How can I further diagnose why this card is not getting recognised? Afaik, you need 'device uart', that will attach to your pucs. -- Totus tuus, Glebius. GLEBIUS-RIPN GLEB-RIPE ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to [EMAIL PROTECTED]
puc fails to attach serial ports
Hi, I'm trying to use puc(4) under RELENG_6 to attach the two serial ports on a PCI card I have, but it's not working. It also fails under 6.0-RELEASE, I don't have the ability to test earlier versions. The card is developed, but as far as I can see, no attempt is made to attach the sio(4) devices below it. puc0: Dolphin Peripherals 4036 port 0x18c0-0x18df irq 25 at device 9.0 on pci0 puc0: Reserved 0x20 bytes for rid 0x10 type 4 at 0x18c0 port rid 16 bst 0, start 18c0, end 18df puc0: i 0, type sio, ressz 8, type 1 puc: Using sio2 puc: type 1, bar 10, offset 0 puc0: i 1, type sio, ressz 8, type 1 puc: Using sio3 puc: type 1, bar 10, offset 8 Adding some printfs to the code, it turns out that device_probe_and_attach around line 375 of sys/dev/puc/puc.c is returning 6. I have also added printfs to the probe and attach code of both the pci and puc attachments of sio(4), and have determined that none of them get called. How can I further diagnose why this card is not getting recognised? Thanks, Gavin -- Experience is directly proportional to the value of equipment destroyed. -- Carolyn Scheppner - Gavin Atkinson - General layabout - University Radio York - ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to [EMAIL PROTECTED]