Current problem reports assigned to freebsd-usb@FreeBSD.org
Note: to view an individual PR, use: http://www.freebsd.org/cgi/query-pr.cgi?pr=(number). The following is a listing of current problems submitted by FreeBSD users. These represent problem reports covering all versions including experimental development code and obsolete releases. S Tracker Resp. Description o usb/145265 usb[patch] Freecom USB-IDE bridge o usb/145184 usbGENERIC can't mount root from USB on Asus EEE o usb/145165 usb[keyboard] ukbd_set_leds_callback: error=USB_ERR_STALL f kern/144938 usb[keyboard] [boot] Boot Failure with Apple (MB869LL/A) o usb/144751 usb[ukbd] [usb8] kernel without keyboard support won't co o usb/144423 usb[usb8] [patch] if_run panic with USB-N13 o usb/144414 usb[keyboard] [patch] Apple Fn key doesn't work properl o usb/144387 usb[run] [panic] if_run panic f usb/144332 usb[build] Kernel compile fails when aue is enabled but n o usb/144043 usb[umass] USB DLT tape drive throws random errors o usb/143790 usb[boot] can not boot from usb hdd f usb/143634 usb[umass] [usb8] Jetflash USB flash stick fails to mount f usb/143620 usb[cdce] [usb8] the module if_cdce doesn't support my Op o usb/143448 usb[usbdevs] [usb8] [patch] QUIRK: JMicron JM20336 USB/SA f usb/143294 usb[usb8] copying process stops at some time (10 - 50 sec o usb/143286 usb[ukbd] [usb8] [boot] boot failures on RELENG_8 system f usb/143186 usb[usbdevs] [usb8] [patch] add USB device IDs for Google a usb/143139 usb[umass] [usb8] [patch] Quirk for Century EX35SW4_SB4 J o usb/143045 usb[umass] [usb8] [patch] mounting Fujitsu 2600Z camera d o usb/142991 usb[uftdi] [usb67] [patch] Patch to add Crystalfontz 533 f usb/142989 usb[usb8] canon eos 50D attaches but detaches after few s f usb/142957 usb[umass] [usb8] [patch] patch for USB disk SYNCHRONIZE o usb/142719 usb[urtw] [usb8] AirLive WL-1600USB (RTL8187L chipset) fa o usb/142713 usb[usb67] [panic] Kernel Panik when connecting an IPhone f usb/142276 usb[umass] [usb8] Cache Synchronization Error with Olympu o usb/142229 usb[ums] [usb8] [hang] connecting a USB mouse to a Dell P o usb/141680 usb[uath] [usb8] Netgear WG111T not working with uath dri o usb/141664 usb[pcm] [usb8] Logitech USB microphone failure [regressi o usb/141474 usb[boot] [usb8] FreeBSD 8.0 can not install from USB CDR a usb/141467 usb[uftdi] [patch] RATOC REX-USB60F (usb serial converter o usb/141327 usb[ukbd] [usb67] USB kbd not working with 7.1+PAE on IBM o usb/141313 usb[usb8] nvidia USB 2.0 controller - stops copying on US o usb/141212 usb[ukbd] [usb8] ukbd_set_leds_callback:700: error=USB_ER o kern/141011 usb[usb] Encrypted root, geli password at boot; enter key o usb/140928 usb[u3g] [usb8] [patch] ZTE CDMA2000 1X EV-DO (MG478/AC87 o usb/140920 usb[install] [usb8] USB based install fails on 8.0-RELEAS o usb/140893 usb[urtw] [usb8] WPA2 not working on rtl8187b f usb/140883 usb[axe] [usb8] USB gigabit ethernet hangs after short pe o kern/140849 usb[ums] [usb8] USB mouse doesn't work under FreeBSD 8.0- a usb/140810 usb[uftdi] [usb8] 8.X copy and paste problem / tty overfl o kern/140614 usb[uplcom] [patch] adding support for Radio Shack Gigwar o usb/140590 usb[bluetooth] [usb8] ng_ubt(4) ng_l2cap_process_cmd_rej o usb/140477 usb[umass] [usb8] [patch] allow boot-time attachment of d o usb/140259 usb[libusb] [patch] [usb8] libusb-1.0 portability/compati o usb/140236 usb[msdosfs] [usb8] Labels wiped on external Journaled US o usb/140160 usb[usb8] [acpi] USB ports are no longer active after A s usb/139990 usb[panic] [patch] [usb67] Kernel frequently panics after a usb/139598 usb[umass] [usb8] CAM reports xptioctl: put device pass o usb/139243 usb[uhci] [usb67] unplug prolific USB serial - uhci_abor o usb/138915 usb[patch] [usb8] [usb67] add support for SheevaPlug seri a usb/138904 usb[rum] [panic] [usb67] unpluging USB wifi card panics s f usb/138882 usb[ohci] [panic] [usb67] Can't install FreeBSD 7.2 due t a usb/138879 usb[uftdi] [patch] Patch to add support for CTI USB-Mini o usb/138798 usb[boot] [usb8] 8.0-BETA4 can't boot from USB flash driv o usb/138659 usb[usb8][uftdi] driver broken in RELENG_8/CURRENT o usb/138570 usb[usb] [panic] USB mass device panics current 7.2-STABL o usb/138175 usb[usb67] [boot] System cannot boot, when USB reader wit o usb/138172 usb[u3g] [patch] [usb67] Additional dev id for u3g (Optio o usb/138138 usb
Re: usb/145415: [umass] USB card reader does not create slices nodes
Old Synopsis: USB card reader does not create slices nodes New Synopsis: [umass] USB card reader does not create slices nodes Responsible-Changed-From-To: freebsd-bugs-freebsd-usb Responsible-Changed-By: linimon Responsible-Changed-When: Mon Apr 5 21:16:16 UTC 2010 Responsible-Changed-Why: reclassify http://www.freebsd.org/cgi/query-pr.cgi?pr=145415 ___ freebsd-usb@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-usb To unsubscribe, send any mail to freebsd-usb-unsubscr...@freebsd.org
Re: 10Mbps+ throughput usb based ethernet recommendation
On Sun, April 4, 2010 22:12, Pyun YongHyeon wrote: On Sat, Apr 03, 2010 at 09:46:59PM -0300, Nenhum_de_Nos wrote: On Wed, 31 Mar 2010 12:06:31 -0700 Pyun YongHyeon pyu...@gmail.com wrote: On Fri, Mar 26, 2010 at 11:31:50PM -0300, Nenhum_de_Nos wrote: [...] I changed and got this: miibus1: MII bus on axe0 ukphy0: Generic IEEE 802.3u media interface PHY 1 on miibus1 ukphy0: XXX ID1 = 0x0282, ID2 = 0xf012 ^^ This is *NOT* bogus value. It's Agere Systems' ET1011 gigabit PHY. FreeBSD has truephy(4) for Agere Systems' PHY but it does not have support code for the model yet. so I can think that's the issue, right ? Probably. But this does not explain sometimes why you get some bogus value form PHY id registers. ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto ue0: USB Ethernet on axe0 ue0: Ethernet address: xx ue0: link state changed to DOWN so it didn't now. other thing is that not every time it works: Yeah, that is real issue here. I guess there should be some magic to wakeup the PHY from deep sleep state. I'll see what can be done. ok, great it was found :) let me know if I can help in anything :) Would you try attached patch and let me know how it goes? axe0: PHYADDR 0xe0:0x01 miibus1: MII bus on axe0 ukphy0: Generic IEEE 802.3u media interface PHY 1 on miibus1 ukphy0: XXX ID1 = 0x7949, ID2 = 0x7949 Due to other issues previous patch didn't have chance to make it work. This time, PHY id started to reporting garbage again which means all MII register access may return garbage too. Don't know this could be related with USB subsystem though. ukphy0: 10baseT-FDX ue0: USB Ethernet on axe0 ue0: Ethernet address: 00:11:50:e7:39:e9 ue0: link state changed to DOWN [...] and I can't ping the other host :( ue0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST metric 0 mtu 1500 options=8LINKSTATE ether 00:11:50:e7:39:e9 inet 10.2.1.2 netmask 0xff00 broadcast 10.2.1.255 media: Ethernet none arroway# ifconfig ue0 ue0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST metric 0 mtu 1500 options=8LINKSTATE ether 00:11:50:e7:39:e9 inet 10.2.1.2 netmask 0xff00 broadcast 10.2.1.255 media: Ethernet none (none hw-loopback) status: active arroway# ifconfig ue0 ue0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST metric 0 mtu 1500 options=8LINKSTATE ether 00:11:50:e7:39:e9 inet 10.2.1.2 netmask 0xff00 broadcast 10.2.1.255 media: Ethernet none and it is still crazy media changing. Because your PHY is not recognized it's expected result. :-( waiting for any leads :) I bought a linksys axe based fast ethernet to see what happens. waiting till it arrives. thanks as usual, matheus -- We will call you cygnus, The God of balance you shall be A: Because it messes up the order in which people normally read text. Q: Why is top-posting such a bad thing? http://en.wikipedia.org/wiki/Posting_style ___ freebsd-usb@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-usb To unsubscribe, send any mail to freebsd-usb-unsubscr...@freebsd.org
Re: usb/145237: [usbdevs] [patch] Add support for Matrix Orbital MOU display
Old Synopsis: Support for Matrix Orbital MOU display New Synopsis: [usbdevs] [patch] Add support for Matrix Orbital MOU display Responsible-Changed-From-To: freebsd-bugs-freebsd-usb Responsible-Changed-By: linimon Responsible-Changed-When: Tue Apr 6 05:19:43 UTC 2010 Responsible-Changed-Why: reassign. http://www.freebsd.org/cgi/query-pr.cgi?pr=145237 ___ freebsd-usb@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-usb To unsubscribe, send any mail to freebsd-usb-unsubscr...@freebsd.org
