Current problem reports assigned to freebsd-usb@FreeBSD.org
Note: to view an individual PR, use: http://www.freebsd.org/cgi/query-pr.cgi?pr=(number). The following is a listing of current problems submitted by FreeBSD users. These represent problem reports covering all versions including experimental development code and obsolete releases. S Tracker Resp. Description o usb/166848 usbBuffalo RUF2 requires quirk o usb/165815 usbadd k3772z 3g modem support o usb/165163 usb[keyboard] The USB RF keyboard and mouse become non-re o usb/164058 usbLexar 8GB USB flash drive doesn't work by default o usb/163328 usb[usb] Support for Atheros USB abgn devices o kern/163091 usb[panic] Fatal trap 12: page fault while in kernel mode o usb/162306 usbusb devices cant get address asignation, no memories, o usb/162054 usbusbdump just hangs on 9.0-RC1 f usb/161793 usbpoor EHCI usb2 i/o performance o usb/160436 usbucom wedges machine on parity error ? o usb/160299 usbMicroSDHC-to-USB adapters do not work in FreeBSD 8.x o usb/160192 usb[install] Installation from USB-Stick doesn't find the o usb/159274 usbUSB 3.0 Etron EJ168A does not work. f usb/159191 usb[fusefs-ntfs] write on fusefs-ntfs mounted partition r o usb/157376 usbLaCie USB disk not recognized o usb/157074 usb[boot] [usb8] vfs_mountroot_ask is called when no usb o usb/156898 usb[keyboard] usb keyboard does not work while boot (ps2 f usb/156735 usbNeed Quirk for Goflex USB Disk Drives o usb/156725 usbUSB stack stall cause complete system input loss o usb/156596 usb[ehci] Extremely high interrupt rate on ehci/uhci IRQ1 o usb/156000 usbrum(4) Fatal trap 18: integer divide fault while in ke f usb/155996 usbNanoBSD not booted as Disk o usb/155784 usbProblem with Transcend StoreJet 25M3 (2AJ1) on Asus M2 o usb/154506 usb[umass] Copying dir with large files makes FreeBSD loa o usb/154192 usb[umass] In Garmin Oregon GPS, only the first umass dev o i386/153851 usb[keyboard] keyboard issues on new Intel Mother boards. o usb/153703 usb[keyboard] My USB keyboard can not be used in 8-STABLE o usb/153609 usb[zyd] [panic] kernel: Fatal trap 12: page fault while o usb/153149 usb[umass] USB stick quirk regression [regression] o usb/152075 usb[usb8] [ehci] [request] Add quirk for CS5536 USB o usb/150892 usb[zyd] Whenever network contacted in any shape, way or o usb/150189 usb[run] [usb8] [patch] if_run appears to corrupt IP traf p usb/149764 usb[u3g] [patch] usbdevs update: Huawei K3765 3G modem o usb/149283 usb[uftdi] avrdude unable to talk to Arduino board (via u o usb/149162 usb[ural] ASUS WL-167g doesn't work in 8.1 (continue of 1 s usb/148702 usb[usb8] [request] IO DATA USB-RSAQ5 support on FreeBSD- o usb/148080 usbusbconfig(8) sometimes does not turn off the device o usb/147516 usb[umass] [usb67] kernel unable to deal with Olympus USB o i386/147475 usb[install] FreeBSD 8.x does not install on ASUS K8N4-E o usb/146840 usb[hang] FreeBSD 7.2 / 7.3 / 8.0 hang at startup after e o usb/146153 usb[axe] [usb8] Hosts in network doesn't receive any pack f usb/146054 usb[urtw] [usb8] urtw driver potentially out of date f usb/145513 usb[usb8] New USB stack: no new devices after forced usb p usb/145455 usb[usb8] [patch] USB debug support cannot be disabled o usb/145415 usb[umass] [usb8] USB card reader does not create slices a usb/145184 usbGENERIC can't mount root from USB on Asus EEE o usb/145165 usb[keyboard] [usb8] ukbd_set_leds_callback: error=USB_ER f kern/144938 usb[keyboard] [boot] Boot Failure with Apple (MB869LL/A) o usb/144387 usb[run] [panic] if_run panic o usb/144043 usb[umass] [usb8] USB DLT tape drive throws random errors a usb/143790 usb[boot] [cam] can not boot from usb hdd f usb/143620 usb[cdce] [usb8] the module if_cdce doesn't support my Op f usb/143294 usb[usb8] copying process stops at some time (10 - 50 sec o usb/143286 usb[ukbd] [usb8] [boot] boot failures on RELENG_8 system p usb/143186 usb[usbdevs] [usb8] [patch] add USB device IDs for Google a usb/143139 usb[umass] [usb8] [patch] Quirk for Century EX35SW4_SB4 J p usb/143045 usb[umass] [usb8] [patch] mounting Fujitsu 2600Z camera d o usb/142991 usb[uftdi] [usb67] [patch] Patch to add Crystalfontz 533 f usb/142989 usb[usb8] canon eos 50D attaches but detaches after few s f usb/142957 usb[umass] [usb8] [patch] patch for USB disk SYNCHRONIZE o usb/142719 usb[urtw] [usb8]
Re: USB ethernet ue0 stops working
On Monday 16 April 2012 10:54:43 Matthias Apitz wrote: El día Monday, April 16, 2012 a las 06:14:31AM +0200, Matthias Apitz Apr 16 05:50:17 tinyCurrent kernel: cdce0: RNDIS Ethernet Data on usbus0 Apr 16 05:50:17 tinyCurrent kernel: cdce0: faking MAC address Apr 16 05:50:17 tinyCurrent kernel: ue0: USB Ethernet on cdce0 Apr 16 05:50:17 tinyCurrent kernel: ue0: Ethernet address: 2a:ac:fc:03:00:00 We don't support RNDIS ethernet. You need to search for the WMC compatible one. --HPS ___ freebsd-usb@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-usb To unsubscribe, send any mail to freebsd-usb-unsubscr...@freebsd.org
Re: USB ethernet ue0 stops working
El día Monday, April 16, 2012 a las 03:27:45PM +0200, Hans Petter Selasky escribió: On Monday 16 April 2012 10:54:43 Matthias Apitz wrote: El día Monday, April 16, 2012 a las 06:14:31AM +0200, Matthias Apitz Apr 16 05:50:17 tinyCurrent kernel: cdce0: RNDIS Ethernet Data on usbus0 Apr 16 05:50:17 tinyCurrent kernel: cdce0: faking MAC address Apr 16 05:50:17 tinyCurrent kernel: ue0: USB Ethernet on cdce0 Apr 16 05:50:17 tinyCurrent kernel: ue0: Ethernet address: 2a:ac:fc:03:00:00 We don't support RNDIS ethernet. You need to search for the WMC compatible one. --HPS Hello Hans, Could you please spent a few words more about this. The other end of the USB cable is a cellphone, an Openmoko Freerunner. Even if this is OpenSource I think it is out of my skope to change this or to force the SHR group to change this. The other end runs a Linux kernel 2.6.39.4 and with 2.26.29 this worked fine. It does even work now when I bring all up by hand on both sides. What do you want me to do exactly? Thanks matthias -- Matthias Apitz e g...@unixarea.de - w http://www.unixarea.de/ UNIX since V7 on PDP-11, UNIX on mainframe since ESER 1055 (IBM /370) UNIX on x86 since SVR4.2 UnixWare 2.1.2, FreeBSD since 2.2.5 ___ freebsd-usb@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-usb To unsubscribe, send any mail to freebsd-usb-unsubscr...@freebsd.org
Re: USB ethernet ue0 stops working
On Monday 16 April 2012 15:44:58 Matthias Apitz wrote: El día Monday, April 16, 2012 a las 03:27:45PM +0200, Hans Petter Selasky escribió: On Monday 16 April 2012 10:54:43 Matthias Apitz wrote: El día Monday, April 16, 2012 a las 06:14:31AM +0200, Matthias Apitz Apr 16 05:50:17 tinyCurrent kernel: cdce0: RNDIS Ethernet Data on usbus0 Apr 16 05:50:17 tinyCurrent kernel: cdce0: faking MAC address Apr 16 05:50:17 tinyCurrent kernel: ue0: USB Ethernet on cdce0 Apr 16 05:50:17 tinyCurrent kernel: ue0: Ethernet address: 2a:ac:fc:03:00:00 We don't support RNDIS ethernet. You need to search for the WMC compatible one. --HPS Hello Hans, Could you please spent a few words more about this. The other end of the USB cable is a cellphone, an Openmoko Freerunner. Even if this is OpenSource I think it is out of my skope to change this or to force the SHR group to change this. The other end runs a Linux kernel 2.6.39.4 and with 2.26.29 this worked fine. It does even work now when I bring all up by hand on both sides. Hi, What do you want me to do exactly? If this is an openmoko, you need to run: usbconfig -d X.Y set_config 1 Then it should work I think. --HPS ___ freebsd-usb@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-usb To unsubscribe, send any mail to freebsd-usb-unsubscr...@freebsd.org
USB tethering, Motorola Droid
Was wondering if there is an expectation that the tethering capability of a Motorola Droid *should* work on FreeBSD at this point. The Linux folks seem to have it working just fine, and I was wondering what would need to be done to get it working for us? I assume from earlier posts about RNDIS that it doesn't work at all: [sbruno@powernoodle-l7 /usr/home/sbruno]$ usbconfig -u 1 -a 3 dump_curr_config_desc ugen1.3: Motorola A855 Motorola at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON Configuration index 0 bLength = 0x0009 bDescriptorType = 0x0002 wTotalLength = 0x0043 bNumInterfaces = 0x0002 bConfigurationValue = 0x0001 iConfiguration = 0x no string bmAttributes = 0x00e0 bMaxPower = 0x00fa Interface 0 bLength = 0x0009 bDescriptorType = 0x0004 bInterfaceNumber = 0x bAlternateSetting = 0x bNumEndpoints = 0x0001 bInterfaceClass = 0x00e0 bInterfaceSubClass = 0x0001 bInterfaceProtocol = 0x0003 iInterface = 0x0004 RNDIS Communications Control Additional Descriptor bLength = 0x05 bDescriptorType = 0x24 bDescriptorSubType = 0x00 RAW dump: 0x00 | 0x05, 0x24, 0x00, 0x10, 0x01 Additional Descriptor bLength = 0x05 bDescriptorType = 0x24 bDescriptorSubType = 0x01 RAW dump: 0x00 | 0x05, 0x24, 0x01, 0x00, 0x01 Additional Descriptor bLength = 0x04 bDescriptorType = 0x24 bDescriptorSubType = 0x02 RAW dump: 0x00 | 0x04, 0x24, 0x02, 0x00 Additional Descriptor bLength = 0x05 bDescriptorType = 0x24 bDescriptorSubType = 0x06 RAW dump: 0x00 | 0x05, 0x24, 0x06, 0x00, 0x01 Endpoint 0 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0082 IN bmAttributes = 0x0003 INTERRUPT wMaxPacketSize = 0x0008 bInterval = 0x0009 bRefresh = 0x bSynchAddress = 0x Interface 1 bLength = 0x0009 bDescriptorType = 0x0004 bInterfaceNumber = 0x0001 bAlternateSetting = 0x bNumEndpoints = 0x0002 bInterfaceClass = 0x000a bInterfaceSubClass = 0x bInterfaceProtocol = 0x iInterface = 0x0005 RNDIS Ethernet Data Endpoint 0 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0081 IN bmAttributes = 0x0002 BULK wMaxPacketSize = 0x0200 bInterval = 0x bRefresh = 0x bSynchAddress = 0x Endpoint 1 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0001 OUT bmAttributes = 0x0002 BULK wMaxPacketSize = 0x0200 bInterval = 0x bRefresh = 0x bSynchAddress = 0x ___ freebsd-usb@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-usb To unsubscribe, send any mail to freebsd-usb-unsubscr...@freebsd.org
Re: USB tethering, Motorola Droid
On Monday 16 April 2012 17:23:39 Sean Bruno wrote: Was wondering if there is an expectation that the tethering capability of a Motorola Droid *should* work on FreeBSD at this point. The Linux folks seem to have it working just fine, and I was wondering what would need to be done to get it working for us? I assume from earlier posts about RNDIS that it doesn't work at all: [sbruno@powernoodle-l7 /usr/home/sbruno]$ usbconfig -u 1 -a 3 dump_curr_config_desc ugen1.3: Motorola A855 Motorola at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON Hi, Unless there is a second configuration, with CDC ethernet, it won't. --HPS ___ freebsd-usb@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-usb To unsubscribe, send any mail to freebsd-usb-unsubscr...@freebsd.org
Re: usb/167001: [USB] [PATCH] add support for Smart G2 64MB memory key
Synopsis: [USB] [PATCH] add support for Smart G2 64MB memory key Responsible-Changed-From-To: freebsd-bugs-freebsd-usb Responsible-Changed-By: linimon Responsible-Changed-When: Mon Apr 16 16:36:51 UTC 2012 Responsible-Changed-Why: reassign. http://www.freebsd.org/cgi/query-pr.cgi?pr=167001 ___ freebsd-usb@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-usb To unsubscribe, send any mail to freebsd-usb-unsubscr...@freebsd.org
Re: USB ethernet ue0 stops working
Hi,
El día Monday, April 16, 2012 a las 04:51:55PM +0200, Hans Petter Selasky
escribió:
If this is an openmoko, you need to run:
Yes, it is an Openmoko Freerunner which I have updated from a SHR
version from year 2010 to now latest release (stage 046);
usbconfig -d X.Y set_config 1
I did this already in the past with a devd(8) hook script:
notify 1 {
match vendor 0x1457;
match product 0x5122;
action /usr/local/etc/devd/moko.sh $ugen;
};
while watching devd(8) in debug mode I learned that they now have changed
the vendor and product ID to 0x0525 and 0xa4a2 which the Linux kernel
of the Freerunner presents to the FreeBSD host; and after updating the
values to the new ones all is fine again;
do you know why and how Linux this was changing?
anyway, thanks
matthias
--
Matthias Apitz
e g...@unixarea.de - w http://www.unixarea.de/
UNIX since V7 on PDP-11, UNIX on mainframe since ESER 1055 (IBM /370)
UNIX on x86 since SVR4.2 UnixWare 2.1.2, FreeBSD since 2.2.5
___
freebsd-usb@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to freebsd-usb-unsubscr...@freebsd.org
Re: USB ethernet ue0 stops working
On Monday 16 April 2012 20:47:49 Matthias Apitz wrote:
Hi,
El día Monday, April 16, 2012 a las 04:51:55PM +0200, Hans Petter Selasky
escribió:
If this is an openmoko, you need to run:
Yes, it is an Openmoko Freerunner which I have updated from a SHR
version from year 2010 to now latest release (stage 046);
usbconfig -d X.Y set_config 1
I did this already in the past with a devd(8) hook script:
notify 1 {
match vendor 0x1457;
match product 0x5122;
action /usr/local/etc/devd/moko.sh $ugen;
};
while watching devd(8) in debug mode I learned that they now have changed
the vendor and product ID to 0x0525 and 0xa4a2 which the Linux kernel
of the Freerunner presents to the FreeBSD host; and after updating the
values to the new ones all is fine again;
do you know why and how Linux this was changing?
No.
--HPS
___
freebsd-usb@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to freebsd-usb-unsubscr...@freebsd.org
