Re: Problem with connecting external HDD ADATA CH11 1TB USB 3.0
On Monday 05 September 2011 10:09:08 Kaminar wrote: Hi, I bought external HDD ADATA CH11 1TB USB 3.0 (compatible with USB2.0). I have problem to connect HDD to FreeBSD box. I post my problem on FreeBSD forum (the thread on FreeBSD forum is http://forums.freebsd.org/showthread.php?t=26082). People on forum suggest to me to send problem here. I enclosure summary of everything of what I observed. HDD: external HDD ADATA CH11 1TB USB 3.0 (compatible with USB2.0), 2.5inch size without cable power supply. After HDD connection to USB2.0 on desktop PC with FreeBSD 8.1R I got error messages: Code: kernel: usb_alloc_device: set address 2 failed (USB_ERR_STALLED, ignored) kernel: usb_alloc_device: getting device descriptor at addr 2 failed, USB_ERR_STALLED kernel: usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_STALLED, ignored) kernel: usbd_req_re_enumerate: getting device descriptor at addr 2 failed, USB_ERR_STALLED kernel: usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_STALLED, ignored) kernel: usbd_req_re_enumerate: getting device descriptor at addr 2 failed, USB_ERR_STALLED kernel: ugen4.2: (null) at usbus4 (disconnected) kernel: uhub_reattach_port: could not allocate new device In this thread http://forums.freebsd.org/showthread.php?t=25386 I found somebody solved similar problem by connecting disk within USB hub. I tried three hubs. Every USB hubs have not power supply. With the first USB hub I got: - Code: kernel: ugen4.2: ALCOR at usbus4 kernel: uhub9: ALCOR Generic USB Hub, class 9/0, rev 1.10/3.12, addr 2 on usbus4 kernel: uhub9: 4 ports with 4 removable, self powered root: Unknown USB device: vendor 0x125f product 0xa11a bus uhub9 kernel: ugen4.3: ADATA at usbus4 kernel: umass0: ADATA CH11, class 0/0, rev 2.10/1.00, addr 3 on usbus4 kernel: umass0: SCSI over Bulk-Only; quirks = 0x kernel: umass0:14:0:-1: Attached to scbus14 No success. No device appeared. It looks like USB hub seems not to properly powering HDD. The HDD probably was not spinning and there was only hearing quiet ticking from HDD. After disconnecting disk I got: Code: kernel: ugen4.3: ADATA at usbus4 (disconnected) kernel: umass0: at uhub9, port 4, addr 3 (disconnected) kernel: (probe0:umass-sim0:0:0:0): AutoSense failed kernel: ugen4.2: ALCOR at usbus4 (disconnected) kernel: uhub9: at uhub4, port 2, addr 2 (disconnected) With the second USB hub I got: -- Code: kernel: ugen8.2: vendor 0x05e3 at usbus8 kernel: uhub9: vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/7.02, addr 2 on usbus8 kernel: uhub9: 4 ports with 4 removable, self powered root: Unknown USB device: vendor 0x125f product 0xa11a bus uhub9 kernel: ugen8.3: ADATA at usbus8 kernel: umass0: ADATA CH11, class 0/0, rev 2.10/1.00, addr 3 on usbus8 kernel: umass0: SCSI over Bulk-Only; quirks = 0x kernel: umass0:14:0:-1: Attached to scbus14 kernel: (probe0:umass-sim0:0:0:0): AutoSense failed kernel: ugen8.3: ADATA at usbus8 (disconnected) kernel: umass0: at uhub9, port 3, addr 3 (disconnected) kernel: ugen8.2: vendor 0x05e3 at usbus8 (disconnected) kernel: uhub9: at uhub8, port 2, addr 2 (disconnected) No success. No device appeared. With the third USB hub I got: - Code: kernel: ugen8.2: vendor 0x05e3 at usbus8 kernel: uhub9: vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/7.02, addr 2 on usbus8 kernel: uhub9: 4 ports with 4 removable, self powered root: Unknown USB device: vendor 0x125f product 0xa11a bus uhub9 kernel: ugen8.3: ADATA at usbus8 kernel: umass0: ADATA CH11, class 0/0, rev 2.10/1.00, addr 3 on usbus8 kernel: umass0: SCSI over Bulk-Only; quirks = 0x kernel: umass0:14:0:-1: Attached to scbus14 kernel: da0 at umass-sim0 bus 0 scbus14 target 0 lun 0 kernel: da0: ADATA CH11 GL00 Fixed Direct Access SCSI-5 device kernel: da0: 40.000MB/s transfers kernel: da0: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C) kernel: ugen8.3: ADATA at usbus8 (disconnected) kernel: umass0: at uhub9, port 3, addr 3 (disconnected) kernel: (da0:umass-sim0:0:0:0): lost device kernel: (da0:umass-sim0:0:0:0): removing device entry kernel: ugen8.2: vendor 0x05e3 at usbus8 (disconnected) kernel: uhub9: at uhub8, port 2, addr 2 (disconnected) With the third USB hub it seems HDD is working. The disk was preformated to FAT32. I tried to copy one small file and delete it. It works. But why doesn't it work if HDD is connected directly to PC or within 1st or 2nd USB hub? The third USB hub is not mine and I am afraid it is not on market yet. Due to I need other solution to use my external HDD. Linux box (Ubuntu 10.04): - I tried it on Linux box too (on Ubuntu 10.04 which is on different computer than my FreeBSD is installed). HDD directly plugged to computer's USB2.0 connector was automatically mounted and it
Re: Problem with connecting external HDD ADATA CH11 1TB USB 3.0
Od: Hans Petter Selasky hsela...@c2i.net Předmět: Re: Problem with connecting external HDD ADATA CH11 1TB USB 3.0 Datum: 05.9.2011 11:02:15 On Monday 05 September 2011 10:09:08 Kaminar wrote: Hi, I bought external HDD ADATA CH11 1TB USB 3.0 (compatible with USB2.0). I have problem to connect HDD to FreeBSD box. I post my problem on FreeBSD forum (the thread on FreeBSD forum is http://forums.freebsd.org/showthread.php?t=26082). People on forum suggest to me to send problem here. I enclosure summary of everything of what I observed. HDD: external HDD ADATA CH11 1TB USB 3.0 (compatible with USB2.0), 2.5inch size without cable power supply. After HDD connection to USB2.0 on desktop PC with FreeBSD 8.1R I got error messages: Code: kernel: usb_alloc_device: set address 2 failed (USB_ERR_STALLED, ignored) kernel: usb_alloc_device: getting device descriptor at addr 2 failed, USB_ERR_STALLED kernel: usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_STALLED, ignored) kernel: usbd_req_re_enumerate: getting device descriptor at addr 2 failed, USB_ERR_STALLED kernel: usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_STALLED, ignored) kernel: usbd_req_re_enumerate: getting device descriptor at addr 2 failed, USB_ERR_STALLED kernel: ugen4.2: (null) at usbus4 (disconnected) kernel: uhub_reattach_port: could not allocate new device In this thread http://forums.freebsd.org/showthread.php?t=25386 I found somebody solved similar problem by connecting disk within USB hub. I tried three hubs. Every USB hubs have not power supply. With the first USB hub I got: - Code: kernel: ugen4.2: ALCOR at usbus4 kernel: uhub9: ALCOR Generic USB Hub, class 9/0, rev 1.10/3.12, addr 2 on usbus4 kernel: uhub9: 4 ports with 4 removable, self powered root: Unknown USB device: vendor 0x125f product 0xa11a bus uhub9 kernel: ugen4.3: ADATA at usbus4 kernel: umass0: ADATA CH11, class 0/0, rev 2.10/1.00, addr 3 on usbus4 kernel: umass0: SCSI over Bulk-Only; quirks = 0x kernel: umass0:14:0:-1: Attached to scbus14 No success. No device appeared. It looks like USB hub seems not to properly powering HDD. The HDD probably was not spinning and there was only hearing quiet ticking from HDD. After disconnecting disk I got: Code: kernel: ugen4.3: ADATA at usbus4 (disconnected) kernel: umass0: at uhub9, port 4, addr 3 (disconnected) kernel: (probe0:umass-sim0:0:0:0): AutoSense failed kernel: ugen4.2: ALCOR at usbus4 (disconnected) kernel: uhub9: at uhub4, port 2, addr 2 (disconnected) With the second USB hub I got: -- Code: kernel: ugen8.2: vendor 0x05e3 at usbus8 kernel: uhub9: vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/7.02, addr 2 on usbus8 kernel: uhub9: 4 ports with 4 removable, self powered root: Unknown USB device: vendor 0x125f product 0xa11a bus uhub9 kernel: ugen8.3: ADATA at usbus8 kernel: umass0: ADATA CH11, class 0/0, rev 2.10/1.00, addr 3 on usbus8 kernel: umass0: SCSI over Bulk-Only; quirks = 0x kernel: umass0:14:0:-1: Attached to scbus14 kernel: (probe0:umass-sim0:0:0:0): AutoSense failed kernel: ugen8.3: ADATA at usbus8 (disconnected) kernel: umass0: at uhub9, port 3, addr 3 (disconnected) kernel: ugen8.2: vendor 0x05e3 at usbus8 (disconnected) kernel: uhub9: at uhub8, port 2, addr 2 (disconnected) No success. No device appeared. With the third USB hub I got: - Code: kernel: ugen8.2: vendor 0x05e3 at usbus8 kernel: uhub9: vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/7.02, addr 2 on usbus8 kernel: uhub9: 4 ports with 4 removable, self powered root: Unknown USB device: vendor 0x125f product 0xa11a bus uhub9 kernel: ugen8.3: ADATA at usbus8 kernel: umass0: ADATA CH11, class 0/0, rev 2.10/1.00, addr 3 on usbus8 kernel: umass0: SCSI over Bulk-Only; quirks = 0x kernel: umass0:14:0:-1: Attached to scbus14 kernel: da0 at umass-sim0 bus 0 scbus14 target 0 lun 0 kernel: da0: ADATA CH11 GL00 Fixed Direct Access SCSI-5 device kernel: da0: 40.000MB/s transfers kernel: da0: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C) kernel: ugen8.3: ADATA at usbus8 (disconnected) kernel: umass0: at uhub9, port 3, addr 3 (disconnected) kernel: (da0:umass-sim0:0:0:0): lost device kernel: (da0:umass-sim0:0:0:0): removing device entry kernel: ugen8.2: vendor 0x05e3 at usbus8 (disconnected) kernel: uhub9: at uhub8, port 2, addr 2 (disconnected) With the third USB hub it seems HDD is working. The disk was preformated to FAT32. I tried to copy one small file and delete it. It works. But why doesn't it work if HDD is connected directly to PC or within 1st or 2nd USB hub? The third USB hub is not mine and I am afraid it is not on market yet. Due to I need other solution
