Re: FreeBSD current RT3071 can't connect to 5G network
The hope is someone has to code it. net80211 supports 11n fine. :) -a ___ freebsd-wireless@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-wireless To unsubscribe, send any mail to freebsd-wireless-unsubscr...@freebsd.org
Re: FreeBSD current RT3071 can't connect to 5G network
Lol yeah but that was what I meant ... if some is interested in coding it ... are you for example? Judging for the amount of work you have with ath etc I guess not, and I got a feeling this would be fun to do :) Melhores Cumprimentos // Best Regards --- *Miguel Clara* *IT - Sys Admin Developer* *E-mail:*miguelmcl...@gmail.com www.linkedin.com/in/miguelmclara/ On Sat, Aug 30, 2014 at 9:22 PM, Adrian Chadd adr...@freebsd.org wrote: The hope is someone has to code it. net80211 supports 11n fine. :) -a ___ freebsd-wireless@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-wireless To unsubscribe, send any mail to freebsd-wireless-unsubscr...@freebsd.org
Re: FreeBSD current RT3071 can't connect to 5G network
Sorry no. Kevin On Wed, Aug 20, 2014 at 12:42:34AM +0100, Miguel Clara wrote: Would hardware donation help? At least in you're case I mean :) Melhores Cumprimentos // Best Regards --- *Miguel Clara* *IT - Sys Admin Developer* *E-mail:*miguelmcl...@gmail.com www.linkedin.com/in/miguelmclara/ On Mon, Aug 18, 2014 at 9:49 AM, Kevin Lo ke...@freebsd.org wrote: Since there is no data sheets available, looking throught the source code from the vendor makes slower development and is very time-consuming, at least in my case. Kevin On Sun, Aug 17, 2014 at 05:03:50PM +0100, Miguel Clara wrote: Thanks for clarifying Kevin. I wonder whats the reason for this? Since its in all I guess something in the kernel makes this harder? or is it just lack of time/resources? thanks Melhores Cumprimentos // Best Regards --- *Miguel Clara* *IT - Sys Admin Developer* *E-mail:*miguelmcl...@gmail.com www.linkedin.com/in/miguelmclara/ On Sun, Aug 17, 2014 at 3:43 PM, Kevin Lo ke...@freebsd.org wrote: On Sat, Aug 16, 2014 at 09:07:29PM +0100, Miguel Clara wrote: On Fri, Aug 15, 2014 at 4:06 AM, Kevin Lo ke...@freebsd.org wrote: All USB wifi dongles in FreeBSD don't support 11n yet. Kevin I was not aware of that, is this really true for all USB wifi dongles or do you mean ralink only? It's true for all USB wifi dongles in *BSD... Kevin ___ freebsd-wireless@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-wireless To unsubscribe, send any mail to freebsd-wireless-unsubscr...@freebsd.org ___ freebsd-wireless@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-wireless To unsubscribe, send any mail to freebsd-wireless-unsubscr...@freebsd.org ___ freebsd-wireless@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-wireless To unsubscribe, send any mail to freebsd-wireless-unsubscr...@freebsd.org
Re: FreeBSD current RT3071 can't connect to 5G network
Wireless drivers on FreeBSD have a manual page which lists the hardware supported by that driver. For example: https://www.freebsd.org/cgi/man.cgi?query=runapropos=0sektion=0manpath=FreeBSD+10.0-RELEASEarch=defaultformat=html#HARDWARE Does this help you? Thanks. Kevin On Fri, Aug 15, 2014 at 06:30:43AM -0700, Patrick Powell wrote: Is it possible to provide a SHORT list of a COUPLE that do, and are either supported out of the box or with a few simple mods to the driver (patch?). And perhaps a link to a site where they might be purchased? On 08/14/14 20:06, Kevin Lo wrote: All USB wifi dongles in FreeBSD don't support 11n yet. Kevin On Thu, Aug 14, 2014 at 03:09:23PM +0100, Miguel Clara wrote: Duh, I figured it out... by default the Asus Guest netwroks are created in auto mode, so both N and legacy, while my 5G network was set to N only (2.4 is set to auto too). This also explain the poor performance now... for some reason 11n is not working only 11g/a. ifconfig wlan0 mode 11na or 11ng gives me device is not configured (This works fine for the ath card tough)! Melhores Cumprimentos // Best Regards --- *Miguel Clara* *IT - Sys Admin Developer* *E-mail:*miguelmcl...@gmail.com www.linkedin.com/in/miguelmclara/ On Thu, Aug 14, 2014 at 2:13 PM, Miguel Clara miguelmcl...@gmail.com wrote: On Wed, Aug 13, 2014 at 7:10 PM, Miguel Clara miguelmcl...@gmail.com wrote: Hi, just wanted to report that the patch made no difference. However I created a guest network in my router with the same password and also using WPA2, and it connects to it. the only difference is the BSSID, so I wonder if this is a issue with wpa and nothing to to with the driver? NOTE: it works well if using ath driivers so the problem is probably in the driver indeed! But the performance is still horrible! ___ freebsd-wireless@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-wireless To unsubscribe, send any mail to freebsd-wireless-unsubscr...@freebsd.org ___ freebsd-wireless@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-wireless To unsubscribe, send any mail to freebsd-wireless-unsubscr...@freebsd.org ___ freebsd-wireless@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-wireless To unsubscribe, send any mail to freebsd-wireless-unsubscr...@freebsd.org ___ freebsd-wireless@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-wireless To unsubscribe, send any mail to freebsd-wireless-unsubscr...@freebsd.org
Re: FreeBSD current RT3071 can't connect to 5G network
Are you seeing RX CRC errors for all rates? CCK? OFDM? HT? At all distances? There's a handful of things we can look at to see what's causing it once some more digging is done. (Eg, HT? could be guard interval. OFDM has similar issues, there's typically ways to configure how much time between each symbol is left before transmitting the next one. It may not be doing CTS-to-self, or it may not be advertising the right thing via NAV, or it may be ignoring CCK, or the receive gain tables are all messed up, etc.) -a ___ freebsd-wireless@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-wireless To unsubscribe, send any mail to freebsd-wireless-unsubscr...@freebsd.org
Re: FreeBSD current RT3071 can't connect to 5G network
On Wed, Aug 20, 2014 at 1:29 PM, Adrian Chadd adr...@freebsd.org wrote: Are you seeing RX CRC errors for all rates? CCK? OFDM? HT? At all distances? CCK not sure, OFDM and HT yes. And at wide range of distances. (Tx rates usually hit mcs 12 to 14 with 2s ht20 ap) There's a handful of things we can look at to see what's causing it once some more digging is done. (Eg, HT? could be guard interval. OFDM has similar issues, there's typically ways to configure how much time between each symbol is left before transmitting the next one. It may not be doing CTS-to-self, or it may not be advertising the right thing via NAV, or it may be ignoring CCK, or the receive gain tables are all messed up, etc.) I have looked into stuff I was able to dig out from other src codes, ie protection, ifs, nav, bk slot. (Because I do not have datasheet, every thing is based on my guesses.) One thing I could not figure out is if on-chip memory is properly allocated for rx pkt. (It seems memory can be allocated for different things, ie beacon, enc keys). -a ___ freebsd-wireless@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-wireless To unsubscribe, send any mail to freebsd-wireless-unsubscr...@freebsd.org
Re: FreeBSD current RT3071 can't connect to 5G network
On 20 August 2014 16:33, PseudoCylon moonlightak...@yahoo.ca wrote: On Wed, Aug 20, 2014 at 1:29 PM, Adrian Chadd adr...@freebsd.org wrote: Are you seeing RX CRC errors for all rates? CCK? OFDM? HT? At all distances? CCK not sure, OFDM and HT yes. And at wide range of distances. (Tx rates usually hit mcs 12 to 14 with 2s ht20 ap) There's a handful of things we can look at to see what's causing it once some more digging is done. (Eg, HT? could be guard interval. OFDM has similar issues, there's typically ways to configure how much time between each symbol is left before transmitting the next one. It may not be doing CTS-to-self, or it may not be advertising the right thing via NAV, or it may be ignoring CCK, or the receive gain tables are all messed up, etc.) I have looked into stuff I was able to dig out from other src codes, ie protection, ifs, nav, bk slot. (Because I do not have datasheet, every thing is based on my guesses.) One thing I could not figure out is if on-chip memory is properly allocated for rx pkt. (It seems memory can be allocated for different things, ie beacon, enc keys). So CRC errors are pretty normal with wifi. Even a tiny bit of interference generates CRC errors. That's why there's an ACK and retry mechanism. :P If you're hitting MCS 12 then you're doing pretty well. A-MPDU will see lots of CRC errors just because of how long the transmissions are and how easily corrupted things can get. That's again why there's a quick retry mechanism for things. What %age errors are you seeing? -a ___ freebsd-wireless@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-wireless To unsubscribe, send any mail to freebsd-wireless-unsubscr...@freebsd.org
Re: FreeBSD current RT3071 can't connect to 5G network
Since there is no data sheets available, looking throught the source code from the vendor makes slower development and is very time-consuming, at least in my case. Kevin On Sun, Aug 17, 2014 at 05:03:50PM +0100, Miguel Clara wrote: Thanks for clarifying Kevin. I wonder whats the reason for this? Since its in all I guess something in the kernel makes this harder? or is it just lack of time/resources? thanks Melhores Cumprimentos // Best Regards --- *Miguel Clara* *IT - Sys Admin Developer* *E-mail:*miguelmcl...@gmail.com www.linkedin.com/in/miguelmclara/ On Sun, Aug 17, 2014 at 3:43 PM, Kevin Lo ke...@freebsd.org wrote: On Sat, Aug 16, 2014 at 09:07:29PM +0100, Miguel Clara wrote: On Fri, Aug 15, 2014 at 4:06 AM, Kevin Lo ke...@freebsd.org wrote: All USB wifi dongles in FreeBSD don't support 11n yet. Kevin I was not aware of that, is this really true for all USB wifi dongles or do you mean ralink only? It's true for all USB wifi dongles in *BSD... Kevin ___ freebsd-wireless@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-wireless To unsubscribe, send any mail to freebsd-wireless-unsubscr...@freebsd.org ___ freebsd-wireless@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-wireless To unsubscribe, send any mail to freebsd-wireless-unsubscr...@freebsd.org
Re: FreeBSD current RT3071 can't connect to 5G network
On Sat, Aug 16, 2014 at 09:07:29PM +0100, Miguel Clara wrote: On Fri, Aug 15, 2014 at 4:06 AM, Kevin Lo ke...@freebsd.org wrote: All USB wifi dongles in FreeBSD don't support 11n yet. Kevin I was not aware of that, is this really true for all USB wifi dongles or do you mean ralink only? It's true for all USB wifi dongles in *BSD... Kevin ___ freebsd-wireless@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-wireless To unsubscribe, send any mail to freebsd-wireless-unsubscr...@freebsd.org
Re: FreeBSD current RT3071 can't connect to 5G network
Thanks for clarifying Kevin. I wonder whats the reason for this? Since its in all I guess something in the kernel makes this harder? or is it just lack of time/resources? thanks Melhores Cumprimentos // Best Regards --- *Miguel Clara* *IT - Sys Admin Developer* *E-mail:*miguelmcl...@gmail.com www.linkedin.com/in/miguelmclara/ On Sun, Aug 17, 2014 at 3:43 PM, Kevin Lo ke...@freebsd.org wrote: On Sat, Aug 16, 2014 at 09:07:29PM +0100, Miguel Clara wrote: On Fri, Aug 15, 2014 at 4:06 AM, Kevin Lo ke...@freebsd.org wrote: All USB wifi dongles in FreeBSD don't support 11n yet. Kevin I was not aware of that, is this really true for all USB wifi dongles or do you mean ralink only? It's true for all USB wifi dongles in *BSD... Kevin ___ freebsd-wireless@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-wireless To unsubscribe, send any mail to freebsd-wireless-unsubscr...@freebsd.org
Re: FreeBSD current RT3071 can't connect to 5G network
On Fri, Aug 15, 2014 at 4:06 AM, Kevin Lo ke...@freebsd.org wrote: All USB wifi dongles in FreeBSD don't support 11n yet. Kevin I was not aware of that, is this really true for all USB wifi dongles or do you mean ralink only? ___ freebsd-wireless@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-wireless To unsubscribe, send any mail to freebsd-wireless-unsubscr...@freebsd.org
Re: FreeBSD current RT3071 can't connect to 5G network
Is it possible to provide a SHORT list of a COUPLE that do, and are either supported out of the box or with a few simple mods to the driver (patch?). And perhaps a link to a site where they might be purchased? On 08/14/14 20:06, Kevin Lo wrote: All USB wifi dongles in FreeBSD don't support 11n yet. Kevin On Thu, Aug 14, 2014 at 03:09:23PM +0100, Miguel Clara wrote: Duh, I figured it out... by default the Asus Guest netwroks are created in auto mode, so both N and legacy, while my 5G network was set to N only (2.4 is set to auto too). This also explain the poor performance now... for some reason 11n is not working only 11g/a. ifconfig wlan0 mode 11na or 11ng gives me device is not configured (This works fine for the ath card tough)! Melhores Cumprimentos // Best Regards --- *Miguel Clara* *IT - Sys Admin Developer* *E-mail:*miguelmcl...@gmail.com www.linkedin.com/in/miguelmclara/ On Thu, Aug 14, 2014 at 2:13 PM, Miguel Clara miguelmcl...@gmail.com wrote: On Wed, Aug 13, 2014 at 7:10 PM, Miguel Clara miguelmcl...@gmail.com wrote: Hi, just wanted to report that the patch made no difference. However I created a guest network in my router with the same password and also using WPA2, and it connects to it. the only difference is the BSSID, so I wonder if this is a issue with wpa and nothing to to with the driver? NOTE: it works well if using ath driivers so the problem is probably in the driver indeed! But the performance is still horrible! ___ freebsd-wireless@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-wireless To unsubscribe, send any mail to freebsd-wireless-unsubscr...@freebsd.org ___ freebsd-wireless@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-wireless To unsubscribe, send any mail to freebsd-wireless-unsubscr...@freebsd.org ___ freebsd-wireless@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-wireless To unsubscribe, send any mail to freebsd-wireless-unsubscr...@freebsd.org
Re: FreeBSD current RT3071 can't connect to 5G network
On Wed, Aug 13, 2014 at 7:10 PM, Miguel Clara miguelmcl...@gmail.com wrote: Hi, just wanted to report that the patch made no difference. However I created a guest network in my router with the same password and also using WPA2, and it connects to it. the only difference is the BSSID, so I wonder if this is a issue with wpa and nothing to to with the driver? NOTE: it works well if using ath driivers so the problem is probably in the driver indeed! But the performance is still horrible! ___ freebsd-wireless@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-wireless To unsubscribe, send any mail to freebsd-wireless-unsubscr...@freebsd.org
Re: FreeBSD current RT3071 can't connect to 5G network
Duh, I figured it out... by default the Asus Guest netwroks are created in auto mode, so both N and legacy, while my 5G network was set to N only (2.4 is set to auto too). This also explain the poor performance now... for some reason 11n is not working only 11g/a. ifconfig wlan0 mode 11na or 11ng gives me device is not configured (This works fine for the ath card tough)! Melhores Cumprimentos // Best Regards --- *Miguel Clara* *IT - Sys Admin Developer* *E-mail:*miguelmcl...@gmail.com www.linkedin.com/in/miguelmclara/ On Thu, Aug 14, 2014 at 2:13 PM, Miguel Clara miguelmcl...@gmail.com wrote: On Wed, Aug 13, 2014 at 7:10 PM, Miguel Clara miguelmcl...@gmail.com wrote: Hi, just wanted to report that the patch made no difference. However I created a guest network in my router with the same password and also using WPA2, and it connects to it. the only difference is the BSSID, so I wonder if this is a issue with wpa and nothing to to with the driver? NOTE: it works well if using ath driivers so the problem is probably in the driver indeed! But the performance is still horrible! ___ freebsd-wireless@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-wireless To unsubscribe, send any mail to freebsd-wireless-unsubscr...@freebsd.org
Re: FreeBSD current RT3071 can't connect to 5G network
On Thu, Aug 14, 2014 at 03:09:23PM +0100, Miguel Clara wrote: Duh, I figured it out... by default the Asus Guest netwroks are created in auto mode, so both N and legacy, while my 5G network was set to N only (2.4 is set to auto too). This also explain the poor performance now... for some reason 11n is not working only 11g/a. ifconfig wlan0 mode 11na or 11ng gives me device is not configured (This works fine for the ath card tough)! Thanks a lot, I had just the same issue with my run0: MAC/BBP RT5390 (rev 0x0502), RF RT5370 (MIMO 1T1R), address 7c:dd:90:30:b6:a1 device. Now switched to mixed mode and it just works. :) pgp5wHfUNLlbc.pgp Description: PGP signature
Re: FreeBSD current RT3071 can't connect to 5G network
All USB wifi dongles in FreeBSD don't support 11n yet. Kevin On Thu, Aug 14, 2014 at 03:09:23PM +0100, Miguel Clara wrote: Duh, I figured it out... by default the Asus Guest netwroks are created in auto mode, so both N and legacy, while my 5G network was set to N only (2.4 is set to auto too). This also explain the poor performance now... for some reason 11n is not working only 11g/a. ifconfig wlan0 mode 11na or 11ng gives me device is not configured (This works fine for the ath card tough)! Melhores Cumprimentos // Best Regards --- *Miguel Clara* *IT - Sys Admin Developer* *E-mail:*miguelmcl...@gmail.com www.linkedin.com/in/miguelmclara/ On Thu, Aug 14, 2014 at 2:13 PM, Miguel Clara miguelmcl...@gmail.com wrote: On Wed, Aug 13, 2014 at 7:10 PM, Miguel Clara miguelmcl...@gmail.com wrote: Hi, just wanted to report that the patch made no difference. However I created a guest network in my router with the same password and also using WPA2, and it connects to it. the only difference is the BSSID, so I wonder if this is a issue with wpa and nothing to to with the driver? NOTE: it works well if using ath driivers so the problem is probably in the driver indeed! But the performance is still horrible! ___ freebsd-wireless@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-wireless To unsubscribe, send any mail to freebsd-wireless-unsubscr...@freebsd.org ___ freebsd-wireless@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-wireless To unsubscribe, send any mail to freebsd-wireless-unsubscr...@freebsd.org
Re: FreeBSD current RT3071 can't connect to 5G network
Sorry for the delay in replying, I was out of the office for the last week, I'm recompiling now to try this and will give feedback ASAP. Melhores Cumprimentos // Best Regards --- *Miguel Clara* *IT - Sys Admin Developer* *E-mail:*miguelmcl...@gmail.com www.linkedin.com/in/miguelmclara/ On Tue, Aug 5, 2014 at 10:26 AM, Kevin Lo ke...@freebsd.org wrote: On Sun, Aug 03, 2014 at 11:05:54PM +0800, Kevin Lo wrote: On Tue, Jul 29, 2014 at 11:35:00PM +0100, Miguel Clara wrote: Hi, Hi Miguel, I just brought a TP-Link N600 Wireless Dual Band USB Adpater (model TL-WDN3200) and its correctly recognized in FreeBSD as a ranlink. Dmesg shows: wlan0: Ethernet address: e8:94:f6:12:98:9d run0: firmware RT3071 ver. 0.33 loaded So the module and firmware seem to be loaded fine and I'm able to connect to my 2.4g wireless fine. However I'm having no luck connecting to the 5G network, I've pasted the scans and wpa_supplicant log, and I see: wlan0: Authentication with 60:a4:4c:28:13:c4 timed out. Added BSSID 60:a4:4c:28:13:c4 into blacklist which I'm guessing means that for some reason the auth time-out, but I don't really know why, all other 5G devices connect fine! (Also if its important the router is a RT-N66U running the latest Asus-Merlin firmware) First Scan: ~% ifconfig wlan0 scan SSID/MESH IDBSSID CHAN RATE S:N INT CAPS ** a4:b1:e9:ef:1c:681 54M -36:-68 100 EP RSN HTCAP WPS WPA WME ** 9c:97:26:34:b7:cd 11 54M -41:-78 100 EP RSN HTCAP WPS WPA WME ** 24:ec:99:39:4a:12 11 54M -33:-62 100 EP RSN HTCAP WPS WPA WME ** 26:ec:99:39:4a:13 11 54M -31:-60 100 ES HTCAP WME ** 10:fe:ed:c3:77:517 54M -40:-76 100 EPS RSN HTCAP WPA WME ATH WPS Mynetwork5G 60:a4:4c:28:13:c4 44 54M -12:-20 100 EP RSN HTCAP WME Second Scan % ifconfig wlan0 scan SSID/MESH IDBSSID CHAN RATE S:N INT CAPS ** a4:b1:e9:ef:1c:681 54M -36:-68 100 EP RSN HTCAP WPS WPA WME ** 9c:97:26:34:b7:cd 11 54M -41:-78 100 EP RSN HTCAP WPS WPA WME ** 24:ec:99:39:4a:12 11 54M -33:-62 100 EP RSN HTCAP WPS WPA WME ** 26:ec:99:39:4a:13 11 54M -31:-60 100 ES HTCAP WME ** 10:fe:ed:c3:77:517 54M -40:-76 100 EPS RSN HTCAP WPA WME ATH WPS Mynetwork5G 60:a4:4c:28:13:c4 44 54M -12:-20 100 EP RSN HTCAP WME Mynetwork 60:a4:4c:28:13:c03 54M -18:-32 100 EP RSN HTCAP WME log from -- wpa_supplicant -i wlano -c /etc/wpa_supplicant.conf -d NOTE: while doing this in wpa_supplicant.conf I only have my 5g network! I have the same wlan dongle as yours but I have no problems connecting to the TL-WDR4300 on the 5 GHz band. This email is sent over the 5 GHz. I'll investigate further, thanks. # dmesg | grep run0 run0: 1.0 on usbus0 run0: MAC/BBP RT5592 (rev 0x0222), RF RT5592 (MIMO 2T2R), address f8:1a:67:2a:df:3f run0: firmware RT3071 ver. 0.33 loaded # ifconfig wlan0 wlan0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST metric 0 mtu 1500 ether f8:1a:67:2a:df:3f inet 192.168.0.101 netmask 0xff00 broadcast 192.168.0.255 nd6 options=29PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL media: IEEE 802.11 Wireless Ethernet OFDM/54Mbps mode 11a status: associated ssid wng_5g channel 149 (5745 MHz 11a) bssid 64:66:b3:c2:3b:d4 country US authmode WPA2/802.11i privacy ON deftxkey UNDEF TKIP 2:128-bit txpower 0 bmiss 7 mcastrate 6 mgmtrate 6 scanvalid 60 wme roaming MANUAL Please try Akinori Furukoshi's patch, thanks. Index: sys/dev/usb/wlan/if_run.c === --- sys/dev/usb/wlan/if_run.c (revision 269566) +++ sys/dev/usb/wlan/if_run.c (working copy) @@ -3255,13 +3255,13 @@ run_set_tx_desc(struct run_softc *sc, struct run_t txwi = (struct rt2860_txwi *)(txd + 1); txwi-len = htole16(m-m_pkthdr.len - pad); if (rt2860_rates[ridx].phy == IEEE80211_T_DS) { - txwi-phy = htole16(RT2860_PHY_CCK); + mcs |= RT2860_PHY_CCK; if (ridx != RT2860_RIDX_CCK1 (ic-ic_flags IEEE80211_F_SHPREAMBLE)) mcs |= RT2860_PHY_SHPRE; } else - txwi-phy = htole16(RT2860_PHY_OFDM); - txwi-phy |= htole16(mcs); + mcs |= RT2860_PHY_OFDM; + txwi-phy = htole16(mcs); /* check if RTS/CTS or CTS-to-self protection is required */ if (!IEEE80211_IS_MULTICAST(wh-i_addr1) @@ -3338,7 +3338,7 @@ run_tx(struct run_softc *sc, struct
Re: FreeBSD current RT3071 can't connect to 5G network
On Sun, Aug 03, 2014 at 11:05:54PM +0800, Kevin Lo wrote: On Tue, Jul 29, 2014 at 11:35:00PM +0100, Miguel Clara wrote: Hi, Hi Miguel, I just brought a TP-Link N600 Wireless Dual Band USB Adpater (model TL-WDN3200) and its correctly recognized in FreeBSD as a ranlink. Dmesg shows: wlan0: Ethernet address: e8:94:f6:12:98:9d run0: firmware RT3071 ver. 0.33 loaded So the module and firmware seem to be loaded fine and I'm able to connect to my 2.4g wireless fine. However I'm having no luck connecting to the 5G network, I've pasted the scans and wpa_supplicant log, and I see: wlan0: Authentication with 60:a4:4c:28:13:c4 timed out. Added BSSID 60:a4:4c:28:13:c4 into blacklist which I'm guessing means that for some reason the auth time-out, but I don't really know why, all other 5G devices connect fine! (Also if its important the router is a RT-N66U running the latest Asus-Merlin firmware) First Scan: ~% ifconfig wlan0 scan SSID/MESH IDBSSID CHAN RATE S:N INT CAPS ** a4:b1:e9:ef:1c:681 54M -36:-68 100 EP RSN HTCAP WPS WPA WME ** 9c:97:26:34:b7:cd 11 54M -41:-78 100 EP RSN HTCAP WPS WPA WME ** 24:ec:99:39:4a:12 11 54M -33:-62 100 EP RSN HTCAP WPS WPA WME ** 26:ec:99:39:4a:13 11 54M -31:-60 100 ES HTCAP WME ** 10:fe:ed:c3:77:517 54M -40:-76 100 EPS RSN HTCAP WPA WME ATH WPS Mynetwork5G 60:a4:4c:28:13:c4 44 54M -12:-20 100 EP RSN HTCAP WME Second Scan % ifconfig wlan0 scan SSID/MESH IDBSSID CHAN RATE S:N INT CAPS ** a4:b1:e9:ef:1c:681 54M -36:-68 100 EP RSN HTCAP WPS WPA WME ** 9c:97:26:34:b7:cd 11 54M -41:-78 100 EP RSN HTCAP WPS WPA WME ** 24:ec:99:39:4a:12 11 54M -33:-62 100 EP RSN HTCAP WPS WPA WME ** 26:ec:99:39:4a:13 11 54M -31:-60 100 ES HTCAP WME ** 10:fe:ed:c3:77:517 54M -40:-76 100 EPS RSN HTCAP WPA WME ATH WPS Mynetwork5G 60:a4:4c:28:13:c4 44 54M -12:-20 100 EP RSN HTCAP WME Mynetwork 60:a4:4c:28:13:c03 54M -18:-32 100 EP RSN HTCAP WME log from -- wpa_supplicant -i wlano -c /etc/wpa_supplicant.conf -d NOTE: while doing this in wpa_supplicant.conf I only have my 5g network! I have the same wlan dongle as yours but I have no problems connecting to the TL-WDR4300 on the 5 GHz band. This email is sent over the 5 GHz. I'll investigate further, thanks. # dmesg | grep run0 run0: 1.0 on usbus0 run0: MAC/BBP RT5592 (rev 0x0222), RF RT5592 (MIMO 2T2R), address f8:1a:67:2a:df:3f run0: firmware RT3071 ver. 0.33 loaded # ifconfig wlan0 wlan0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST metric 0 mtu 1500 ether f8:1a:67:2a:df:3f inet 192.168.0.101 netmask 0xff00 broadcast 192.168.0.255 nd6 options=29PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL media: IEEE 802.11 Wireless Ethernet OFDM/54Mbps mode 11a status: associated ssid wng_5g channel 149 (5745 MHz 11a) bssid 64:66:b3:c2:3b:d4 country US authmode WPA2/802.11i privacy ON deftxkey UNDEF TKIP 2:128-bit txpower 0 bmiss 7 mcastrate 6 mgmtrate 6 scanvalid 60 wme roaming MANUAL Please try Akinori Furukoshi's patch, thanks. Index: sys/dev/usb/wlan/if_run.c === --- sys/dev/usb/wlan/if_run.c (revision 269566) +++ sys/dev/usb/wlan/if_run.c (working copy) @@ -3255,13 +3255,13 @@ run_set_tx_desc(struct run_softc *sc, struct run_t txwi = (struct rt2860_txwi *)(txd + 1); txwi-len = htole16(m-m_pkthdr.len - pad); if (rt2860_rates[ridx].phy == IEEE80211_T_DS) { - txwi-phy = htole16(RT2860_PHY_CCK); + mcs |= RT2860_PHY_CCK; if (ridx != RT2860_RIDX_CCK1 (ic-ic_flags IEEE80211_F_SHPREAMBLE)) mcs |= RT2860_PHY_SHPRE; } else - txwi-phy = htole16(RT2860_PHY_OFDM); - txwi-phy |= htole16(mcs); + mcs |= RT2860_PHY_OFDM; + txwi-phy = htole16(mcs); /* check if RTS/CTS or CTS-to-self protection is required */ if (!IEEE80211_IS_MULTICAST(wh-i_addr1) @@ -3338,7 +3338,7 @@ run_tx(struct run_softc *sc, struct mbuf *m, struc /* pickup a rate index */ if (IEEE80211_IS_MULTICAST(wh-i_addr1) || - type != IEEE80211_FC0_TYPE_DATA) { + type != IEEE80211_FC0_TYPE_DATA || m-m_flags M_EAPOL) { ridx = (ic-ic_curmode == IEEE80211_MODE_11A) ? RT2860_RIDX_OFDM6 : RT2860_RIDX_CCK1; ctl_ridx = rt2860_rates[ridx].ctl_ridx; @@ -4998,7 +4998,7 @@ run_updateprot_cb(void *arg) tmp = RT2860_RTSTH_EN | RT2860_PROT_NAV_SHORT | RT2860_TXOP_ALLOW_ALL; /*
Re: FreeBSD current RT3071 can't connect to 5G network
On Tue, Jul 29, 2014 at 11:35:00PM +0100, Miguel Clara wrote: Hi, Hi Miguel, I just brought a TP-Link N600 Wireless Dual Band USB Adpater (model TL-WDN3200) and its correctly recognized in FreeBSD as a ranlink. Dmesg shows: wlan0: Ethernet address: e8:94:f6:12:98:9d run0: firmware RT3071 ver. 0.33 loaded So the module and firmware seem to be loaded fine and I'm able to connect to my 2.4g wireless fine. However I'm having no luck connecting to the 5G network, I've pasted the scans and wpa_supplicant log, and I see: wlan0: Authentication with 60:a4:4c:28:13:c4 timed out. Added BSSID 60:a4:4c:28:13:c4 into blacklist which I'm guessing means that for some reason the auth time-out, but I don't really know why, all other 5G devices connect fine! (Also if its important the router is a RT-N66U running the latest Asus-Merlin firmware) First Scan: ~% ifconfig wlan0 scan SSID/MESH IDBSSID CHAN RATE S:N INT CAPS ** a4:b1:e9:ef:1c:681 54M -36:-68 100 EP RSN HTCAP WPS WPA WME ** 9c:97:26:34:b7:cd 11 54M -41:-78 100 EP RSN HTCAP WPS WPA WME ** 24:ec:99:39:4a:12 11 54M -33:-62 100 EP RSN HTCAP WPS WPA WME ** 26:ec:99:39:4a:13 11 54M -31:-60 100 ES HTCAP WME ** 10:fe:ed:c3:77:517 54M -40:-76 100 EPS RSN HTCAP WPA WME ATH WPS Mynetwork5G 60:a4:4c:28:13:c4 44 54M -12:-20 100 EP RSN HTCAP WME Second Scan % ifconfig wlan0 scan SSID/MESH IDBSSID CHAN RATE S:N INT CAPS ** a4:b1:e9:ef:1c:681 54M -36:-68 100 EP RSN HTCAP WPS WPA WME ** 9c:97:26:34:b7:cd 11 54M -41:-78 100 EP RSN HTCAP WPS WPA WME ** 24:ec:99:39:4a:12 11 54M -33:-62 100 EP RSN HTCAP WPS WPA WME ** 26:ec:99:39:4a:13 11 54M -31:-60 100 ES HTCAP WME ** 10:fe:ed:c3:77:517 54M -40:-76 100 EPS RSN HTCAP WPA WME ATH WPS Mynetwork5G 60:a4:4c:28:13:c4 44 54M -12:-20 100 EP RSN HTCAP WME Mynetwork 60:a4:4c:28:13:c03 54M -18:-32 100 EP RSN HTCAP WME log from -- wpa_supplicant -i wlano -c /etc/wpa_supplicant.conf -d NOTE: while doing this in wpa_supplicant.conf I only have my 5g network! I have the same wlan dongle as yours but I have no problems connecting to the TL-WDR4300 on the 5 GHz band. This email is sent over the 5 GHz. I'll investigate further, thanks. # dmesg | grep run0 run0: 1.0 on usbus0 run0: MAC/BBP RT5592 (rev 0x0222), RF RT5592 (MIMO 2T2R), address f8:1a:67:2a:df:3f run0: firmware RT3071 ver. 0.33 loaded # ifconfig wlan0 wlan0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST metric 0 mtu 1500 ether f8:1a:67:2a:df:3f inet 192.168.0.101 netmask 0xff00 broadcast 192.168.0.255 nd6 options=29PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL media: IEEE 802.11 Wireless Ethernet OFDM/54Mbps mode 11a status: associated ssid wng_5g channel 149 (5745 MHz 11a) bssid 64:66:b3:c2:3b:d4 country US authmode WPA2/802.11i privacy ON deftxkey UNDEF TKIP 2:128-bit txpower 0 bmiss 7 mcastrate 6 mgmtrate 6 scanvalid 60 wme roaming MANUAL wpa_supplicant v2.0 Successfully initialized wpa_supplicant Initializing interface 'wlan0' conf '/etc/wpa_supplicant.conf' driver 'default' ctrl_interface 'N/A' bridge 'N/A' Configuration file '/etc/wpa_supplicant.conf' - '/etc/wpa_supplicant.conf' Reading configuration file '/etc/wpa_supplicant.conf' ctrl_interface='/var/run/wpa_supplicant' Priority group 145 id=0 ssid='PissnLove5G' wpa_driver_bsd_capa: drivercaps=0x0d85c501,cryptocaps=0x001b wlan0: Own MAC address: e8:94:f6:12:98:9d bsd_set_key: alg=0 addr=0x0 key_idx=0 set_tx=0 seq_len=0 key_len=0 bsd_del_key: key_idx=0 bsd_set_key: alg=0 addr=0x0 key_idx=1 set_tx=0 seq_len=0 key_len=0 bsd_del_key: key_idx=1 bsd_set_key: alg=0 addr=0x0 key_idx=2 set_tx=0 seq_len=0 key_len=0 bsd_del_key: key_idx=2 bsd_set_key: alg=0 addr=0x0 key_idx=3 set_tx=0 seq_len=0 key_len=0 bsd_del_key: key_idx=3 wpa_driver_bsd_set_countermeasures: enabled=0 wlan0: RSN: flushing PMKID list in the driver wlan0: Setting scan request: 0 sec 10 usec WPS: Set UUID for interface wlan0 WPS: UUID based on MAC address - hexdump(len=16): 49 97 f8 d3 b1 d4 56 1d 94 a4 d0 76 2e 1d 81 b3 EAPOL: SUPP_PAE entering state DISCONNECTED EAPOL: Supplicant port status: Unauthorized EAPOL: KEY_RX entering state NO_KEY_RECEIVE EAPOL: SUPP_BE entering state INITIALIZE EAP: EAP entering state DISABLED EAPOL: Supplicant port status: Unauthorized EAPOL: Supplicant port status: Unauthorized wlan0: Added interface wlan0 wlan0: State: DISCONNECTED - DISCONNECTED wlan0: State: DISCONNECTED - SCANNING Scan SSID - hexdump_ascii(len=11): 50 69 73 73 6e 4c 6f 76 65 35 47 PissnLove5G wlan0: Starting AP scan for wildcard SSID wpa_driver_bsd_set_wpa: enabled=1 wpa_driver_bsd_set_wpa_internal: wpa=3 privacy=1 EAPOL: disable timer tick EAPOL:
Re: FreeBSD current RT3071 can't connect to 5G network
Also just noticed that even if it conencts to the 2.4g the performence is very low, I also tested in my main Laptop with FreeeBSD 10, same result. Simple iperf tests on my main laptop: Client connecting to RALINK CARD IP, TCP port 5001 TCP window size: 3.07 MByte (default) [ 3] local 10.10.50.50 port 65530 connected with 10.10.50.8 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 27.1 MBytes 22.7 Mbits/sec Client connecting to ath(Atheros AR946x/AR948x) CARD IP, TCP port 5001 TCP window size: 3.07 MByte (default) [ 3] local 10.10.50.50 port 65528 connected with 10.10.50.70 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 94.8 MBytes 79.4 Mbits/sec Thanks ___ freebsd-wireless@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-wireless To unsubscribe, send any mail to freebsd-wireless-unsubscr...@freebsd.org