Re: [Freeipa-users] I think I lost my CA...
Oops, the slapd messages are arriving every 60s, not 5m. On 05/18/2017 08:56 AM, Bret Wortman wrote: httpd_error seems to give the most information. When i try to use ipa cert-show: ipa: INFO: [jsonserver_kerb] ad...@damascusgrp.com: ping(): SUCCESS (111)Connection refused: AH00957: AJP: attempt to connect to 127.0.0.1:8009 (localhost) failed AH00959: ap_proxy_connect_backend disabling worker for (locahost) for 60s [client 192.168.208.54:52714] AH00896: failed to make connection to backend: localhost ipa: ERROR: ra.get_certificate(): Unable to communicate with CMS (503) ipa: INFO: [jsonserver_kerb] ad...@damascusgrp.com: cert_show/1(u'895', version=u'2.213'): CertificateOperationError /var/log/pki/pki-tomcat/ca/debug just loops through the same set of messages every 5 minutes or so but doesn't seem to error. /var/log/pki/localhost_access_log.2017-05-18.txt is basically empty except for a single entry (for a POST to /ca/admin/ca/getStatus) Nothing shows up in dirsrv/slapd-DAMASCUSGRP-COM/errors or access when I issue the request, but periodic messages do appear about every 5 minutes or so. On 05/18/2017 08:43 AM, Bret Wortman wrote: On 04/26/2017 06:02 PM, Rob Crittenden wrote: Bret Wortman wrote: So I can see my certs using cert-find, but can't get details using cert-show or add new ones using cert-request. # ipa cert-find : -- Number of entries returned 385 -- # ipa cert-show 895 ipa: ERROR: Certificate operation cannot be completed: Unable to communicate with CMS (503) # ipa cert-show 1 (which does not exist) ipa: ERROR: Certificate operation cannot be completed: Unable to communicate with CMS (503) # ipa cert-status 895 ipa: ERROR: Certificate operation cannot be completed: Unable to communicate with CMS (503) # Is this an IPV6 thing? Because ipactl shows everything green and certmonger is running. Doubtful. cert-find and cert-show use different APIs in dogtag. cert-find uses the newer RESTful API and cert-show uses the older XML-based API (and is authenticated). I'm guessing that is where the issue lies. What I'd recommend doing is noting the time, restarting the CA, and then plow through the debug log looking for failures. It could be that the CA is only partially up (and I'd check your CA subsystem certs as well). Which debug log, specifically, do you think will help? I'm also not sure what you mean by, "check your CA subsystem certs." We still have pending CSRs that we can't grant until I get this working again. rob Bret On 04/26/2017 09:03 AM, Bret Wortman wrote: Digging still deeper: # ipa cert-request f.f --principal=HTTP/`hostname`@DAMASCUSGRP.COM ipa: ERROR: Certificate operation cannot be completed: Unable to communicate with CMS (503) Looks like this is an HTTP error; so is it possible that my IPA thinks it has a CA but there's no CMS available? On 04/26/2017 08:41 AM, Bret Wortman wrote: Using the firefox debugger, I get these errors when trying to pop up the New Certificate dialog: Empty string passed to getElementById(). (5) jquery.js:4:1060 TypeError: u is undefined app.js:1:362059 Empty string passed to getElementById(). (5) jquery.js:4:1060 TypeError: t is undefined app.js:1:217432 I'm definitely not a web kind of guy so I'm not sure if this is helpful or not. This is on 4.4.0, API Version 2.213. Bret On 04/26/2017 08:35 AM, Bret Wortman wrote: Good news. One of my servers _does_ have CA installed. So why does "Action -> New Certificate" not do anything on this or any other server? Bret On 04/25/2017 02:52 PM, Bret Wortman wrote: I recently had to upgrade all my Fedora IPA servers to C7. It went well, and we've been up and running nicely on 4.4.0 on C7 for the past month or so. Today, someone came and asked me to generate a new certificate for their web server. All was good until I went to the IPA UI and tried to perform Actions->New Certificate, which did nothing. I tried each of our 3 servers in turn. All came back with no popup window and no error, either. I suspect the problem might be that we no longer have a CA server due to the method I used to upgrade the servers. I likely missed a "--setup-ca" in there somewhere, so my rolling update rolled over the CA. What's my best hope of recovery? I never ran this before, so I'm not sure if this shows that I'm missing a CA or not: # ipa ca-find 1 CA matched Name: ipa Description IPA CA Authority ID: 3ce3346[...] Subject DN: CN=Certificate Authority, O=DAMASCUSGRP.COM Issuer DN: CN=Certificate Authority,O=DAMASCUSGRP.COM Number of entries returned 1 # ipa ca-add dg --desc "Damascus Group" --subject
Re: [Freeipa-users] I think I lost my CA...
httpd_error seems to give the most information. When i try to use ipa cert-show: ipa: INFO: [jsonserver_kerb] ad...@damascusgrp.com: ping(): SUCCESS (111)Connection refused: AH00957: AJP: attempt to connect to 127.0.0.1:8009 (localhost) failed AH00959: ap_proxy_connect_backend disabling worker for (locahost) for 60s [client 192.168.208.54:52714] AH00896: failed to make connection to backend: localhost ipa: ERROR: ra.get_certificate(): Unable to communicate with CMS (503) ipa: INFO: [jsonserver_kerb] ad...@damascusgrp.com: cert_show/1(u'895', version=u'2.213'): CertificateOperationError /var/log/pki/pki-tomcat/ca/debug just loops through the same set of messages every 5 minutes or so but doesn't seem to error. /var/log/pki/localhost_access_log.2017-05-18.txt is basically empty except for a single entry (for a POST to /ca/admin/ca/getStatus) Nothing shows up in dirsrv/slapd-DAMASCUSGRP-COM/errors or access when I issue the request, but periodic messages do appear about every 5 minutes or so. On 05/18/2017 08:43 AM, Bret Wortman wrote: On 04/26/2017 06:02 PM, Rob Crittenden wrote: Bret Wortman wrote: So I can see my certs using cert-find, but can't get details using cert-show or add new ones using cert-request. # ipa cert-find : -- Number of entries returned 385 -- # ipa cert-show 895 ipa: ERROR: Certificate operation cannot be completed: Unable to communicate with CMS (503) # ipa cert-show 1 (which does not exist) ipa: ERROR: Certificate operation cannot be completed: Unable to communicate with CMS (503) # ipa cert-status 895 ipa: ERROR: Certificate operation cannot be completed: Unable to communicate with CMS (503) # Is this an IPV6 thing? Because ipactl shows everything green and certmonger is running. Doubtful. cert-find and cert-show use different APIs in dogtag. cert-find uses the newer RESTful API and cert-show uses the older XML-based API (and is authenticated). I'm guessing that is where the issue lies. What I'd recommend doing is noting the time, restarting the CA, and then plow through the debug log looking for failures. It could be that the CA is only partially up (and I'd check your CA subsystem certs as well). Which debug log, specifically, do you think will help? I'm also not sure what you mean by, "check your CA subsystem certs." We still have pending CSRs that we can't grant until I get this working again. rob Bret On 04/26/2017 09:03 AM, Bret Wortman wrote: Digging still deeper: # ipa cert-request f.f --principal=HTTP/`hostname`@DAMASCUSGRP.COM ipa: ERROR: Certificate operation cannot be completed: Unable to communicate with CMS (503) Looks like this is an HTTP error; so is it possible that my IPA thinks it has a CA but there's no CMS available? On 04/26/2017 08:41 AM, Bret Wortman wrote: Using the firefox debugger, I get these errors when trying to pop up the New Certificate dialog: Empty string passed to getElementById(). (5) jquery.js:4:1060 TypeError: u is undefined app.js:1:362059 Empty string passed to getElementById(). (5) jquery.js:4:1060 TypeError: t is undefined app.js:1:217432 I'm definitely not a web kind of guy so I'm not sure if this is helpful or not. This is on 4.4.0, API Version 2.213. Bret On 04/26/2017 08:35 AM, Bret Wortman wrote: Good news. One of my servers _does_ have CA installed. So why does "Action -> New Certificate" not do anything on this or any other server? Bret On 04/25/2017 02:52 PM, Bret Wortman wrote: I recently had to upgrade all my Fedora IPA servers to C7. It went well, and we've been up and running nicely on 4.4.0 on C7 for the past month or so. Today, someone came and asked me to generate a new certificate for their web server. All was good until I went to the IPA UI and tried to perform Actions->New Certificate, which did nothing. I tried each of our 3 servers in turn. All came back with no popup window and no error, either. I suspect the problem might be that we no longer have a CA server due to the method I used to upgrade the servers. I likely missed a "--setup-ca" in there somewhere, so my rolling update rolled over the CA. What's my best hope of recovery? I never ran this before, so I'm not sure if this shows that I'm missing a CA or not: # ipa ca-find 1 CA matched Name: ipa Description IPA CA Authority ID: 3ce3346[...] Subject DN: CN=Certificate Authority, O=DAMASCUSGRP.COM Issuer DN: CN=Certificate Authority,O=DAMASCUSGRP.COM Number of entries returned 1 # ipa ca-add dg --desc "Damascus Group" --subject "CN=DG CA, O=DAMASCUSGRP.COM" ipa: ERROR: Failed to authenticate to CA REST API # klist Ticket cache:
Re: [Freeipa-users] I think I lost my CA...
On 04/26/2017 06:02 PM, Rob Crittenden wrote: Bret Wortman wrote: So I can see my certs using cert-find, but can't get details using cert-show or add new ones using cert-request. # ipa cert-find : -- Number of entries returned 385 -- # ipa cert-show 895 ipa: ERROR: Certificate operation cannot be completed: Unable to communicate with CMS (503) # ipa cert-show 1 (which does not exist) ipa: ERROR: Certificate operation cannot be completed: Unable to communicate with CMS (503) # ipa cert-status 895 ipa: ERROR: Certificate operation cannot be completed: Unable to communicate with CMS (503) # Is this an IPV6 thing? Because ipactl shows everything green and certmonger is running. Doubtful. cert-find and cert-show use different APIs in dogtag. cert-find uses the newer RESTful API and cert-show uses the older XML-based API (and is authenticated). I'm guessing that is where the issue lies. What I'd recommend doing is noting the time, restarting the CA, and then plow through the debug log looking for failures. It could be that the CA is only partially up (and I'd check your CA subsystem certs as well). Which debug log, specifically, do you think will help? I'm also not sure what you mean by, "check your CA subsystem certs." We still have pending CSRs that we can't grant until I get this working again. rob Bret On 04/26/2017 09:03 AM, Bret Wortman wrote: Digging still deeper: # ipa cert-request f.f --principal=HTTP/`hostname`@DAMASCUSGRP.COM ipa: ERROR: Certificate operation cannot be completed: Unable to communicate with CMS (503) Looks like this is an HTTP error; so is it possible that my IPA thinks it has a CA but there's no CMS available? On 04/26/2017 08:41 AM, Bret Wortman wrote: Using the firefox debugger, I get these errors when trying to pop up the New Certificate dialog: Empty string passed to getElementById(). (5) jquery.js:4:1060 TypeError: u is undefined app.js:1:362059 Empty string passed to getElementById(). (5) jquery.js:4:1060 TypeError: t is undefined app.js:1:217432 I'm definitely not a web kind of guy so I'm not sure if this is helpful or not. This is on 4.4.0, API Version 2.213. Bret On 04/26/2017 08:35 AM, Bret Wortman wrote: Good news. One of my servers _does_ have CA installed. So why does "Action -> New Certificate" not do anything on this or any other server? Bret On 04/25/2017 02:52 PM, Bret Wortman wrote: I recently had to upgrade all my Fedora IPA servers to C7. It went well, and we've been up and running nicely on 4.4.0 on C7 for the past month or so. Today, someone came and asked me to generate a new certificate for their web server. All was good until I went to the IPA UI and tried to perform Actions->New Certificate, which did nothing. I tried each of our 3 servers in turn. All came back with no popup window and no error, either. I suspect the problem might be that we no longer have a CA server due to the method I used to upgrade the servers. I likely missed a "--setup-ca" in there somewhere, so my rolling update rolled over the CA. What's my best hope of recovery? I never ran this before, so I'm not sure if this shows that I'm missing a CA or not: # ipa ca-find 1 CA matched Name: ipa Description IPA CA Authority ID: 3ce3346[...] Subject DN: CN=Certificate Authority, O=DAMASCUSGRP.COM Issuer DN: CN=Certificate Authority,O=DAMASCUSGRP.COM Number of entries returned 1 # ipa ca-add dg --desc "Damascus Group" --subject "CN=DG CA, O=DAMASCUSGRP.COM" ipa: ERROR: Failed to authenticate to CA REST API # klist Ticket cache: KEYRING:persistent:0:0 Default principal: ad...@damascusgrp.com Valid starting Expires Service principal 04/25/2017 18:48:26 04/26/2017 18:48:21 krbtgt/damascusgrp@damascusgrp.com # What's my best path of recovery? -- *Bret Wortman* The Damascus Group -- Manage your subscription for the Freeipa-users mailing list: https://www.redhat.com/mailman/listinfo/freeipa-users Go to http://freeipa.org for more info on the project
Re: [Freeipa-users] I think I lost my CA...
The log slog continues but isn't turning up anything useful, or I'm looking in the wrong logs. Now getting twice-daily visits from users who need new SSL certs wondering when I'm going to be able to create them. I'm happy to do the work to figure out what went wrong, I just don't grok these individual components at this level very well. When something goes wrong, it's not trivial to solve. Well, for me it isn't, anyway. ;-) Bret On 05/02/2017 10:50 AM, Bret Wortman wrote: I plowed through /var/log/pki/pki-tomcat/ca/debug, but nothing jumps out as looking like an error. The cert-show failure is troubling, but my inability to get CSRs turned into certs is what's actually driving this. Bret On 04/26/2017 06:02 PM, Rob Crittenden wrote: Bret Wortman wrote: So I can see my certs using cert-find, but can't get details using cert-show or add new ones using cert-request. # ipa cert-find : -- Number of entries returned 385 -- # ipa cert-show 895 ipa: ERROR: Certificate operation cannot be completed: Unable to communicate with CMS (503) # ipa cert-show 1 (which does not exist) ipa: ERROR: Certificate operation cannot be completed: Unable to communicate with CMS (503) # ipa cert-status 895 ipa: ERROR: Certificate operation cannot be completed: Unable to communicate with CMS (503) # Is this an IPV6 thing? Because ipactl shows everything green and certmonger is running. Doubtful. cert-find and cert-show use different APIs in dogtag. cert-find uses the newer RESTful API and cert-show uses the older XML-based API (and is authenticated). I'm guessing that is where the issue lies. What I'd recommend doing is noting the time, restarting the CA, and then plow through the debug log looking for failures. It could be that the CA is only partially up (and I'd check your CA subsystem certs as well). rob Bret On 04/26/2017 09:03 AM, Bret Wortman wrote: Digging still deeper: # ipa cert-request f.f --principal=HTTP/`hostname`@DAMASCUSGRP.COM ipa: ERROR: Certificate operation cannot be completed: Unable to communicate with CMS (503) Looks like this is an HTTP error; so is it possible that my IPA thinks it has a CA but there's no CMS available? On 04/26/2017 08:41 AM, Bret Wortman wrote: Using the firefox debugger, I get these errors when trying to pop up the New Certificate dialog: Empty string passed to getElementById(). (5) jquery.js:4:1060 TypeError: u is undefined app.js:1:362059 Empty string passed to getElementById(). (5) jquery.js:4:1060 TypeError: t is undefined app.js:1:217432 I'm definitely not a web kind of guy so I'm not sure if this is helpful or not. This is on 4.4.0, API Version 2.213. Bret On 04/26/2017 08:35 AM, Bret Wortman wrote: Good news. One of my servers _does_ have CA installed. So why does "Action -> New Certificate" not do anything on this or any other server? Bret On 04/25/2017 02:52 PM, Bret Wortman wrote: I recently had to upgrade all my Fedora IPA servers to C7. It went well, and we've been up and running nicely on 4.4.0 on C7 for the past month or so. Today, someone came and asked me to generate a new certificate for their web server. All was good until I went to the IPA UI and tried to perform Actions->New Certificate, which did nothing. I tried each of our 3 servers in turn. All came back with no popup window and no error, either. I suspect the problem might be that we no longer have a CA server due to the method I used to upgrade the servers. I likely missed a "--setup-ca" in there somewhere, so my rolling update rolled over the CA. What's my best hope of recovery? I never ran this before, so I'm not sure if this shows that I'm missing a CA or not: # ipa ca-find 1 CA matched Name: ipa Description IPA CA Authority ID: 3ce3346[...] Subject DN: CN=Certificate Authority, O=DAMASCUSGRP.COM Issuer DN: CN=Certificate Authority,O=DAMASCUSGRP.COM Number of entries returned 1 # ipa ca-add dg --desc "Damascus Group" --subject "CN=DG CA, O=DAMASCUSGRP.COM" ipa: ERROR: Failed to authenticate to CA REST API # klist Ticket cache: KEYRING:persistent:0:0 Default principal: ad...@damascusgrp.com Valid starting Expires Service principal 04/25/2017 18:48:26 04/26/2017 18:48:21 krbtgt/damascusgrp@damascusgrp.com # What's my best path of recovery? -- *Bret Wortman* The Damascus Group -- Manage your subscription for the Freeipa-users mailing list: https://www.redhat.com/mailman/listinfo/freeipa-users Go to http://freeipa.org for more info on the project
Re: [Freeipa-users] I think I lost my CA...
On 04/28/2017 02:57 PM, Bret Wortman wrote: Flo, I did find that issue and made those corrections to our /etc/hosts file, but the problem persists. Thanks for the idea! after the change did you restart pki? Bret On 04/27/2017 03:42 AM, Florence Blanc-Renaud wrote: On 04/26/2017 04:33 PM, Bret Wortman wrote: So I can see my certs using cert-find, but can't get details using cert-show or add new ones using cert-request. # ipa cert-find : -- Number of entries returned 385 -- # ipa cert-show 895 ipa: ERROR: Certificate operation cannot be completed: Unable to communicate with CMS (503) # ipa cert-show 1 (which does not exist) ipa: ERROR: Certificate operation cannot be completed: Unable to communicate with CMS (503) # ipa cert-status 895 ipa: ERROR: Certificate operation cannot be completed: Unable to communicate with CMS (503) # Is this an IPV6 thing? Because ipactl shows everything green and certmonger is running. Hi Bret, the issue looks similar to https://pagure.io/freeipa/issue/6575 and https://pagure.io/dogtagpki/issue/2570 which were IPv6 related. Note that IPv6 must be enabled on the machine but IPA does not require an IPv6 address to be configured (except for the loopback). You can check the following: - is PKI listening to port 8009 on IPv6 or IPv4 interface? sudo netstat -tunpl | grep 8009 tcp6 0 0 127.0.0.1:8009 :::* LISTEN 10749/java - /etc/pki/pki-tomcat/server.xml defines a redirection from port 8009 to 8443, and the "address" part is important: In the above example, it will be using localhost which can resolve either to IPv4 or IPv6. - /etc/hosts must define the loopback addresses with 127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4 ::1 localhost localhost.localdomain localhost6 localhost6.localdomain6 HTH, Flo. Bret On 04/26/2017 09:03 AM, Bret Wortman wrote: Digging still deeper: # ipa cert-request f.f --principal=HTTP/`hostname`@DAMASCUSGRP.COM ipa: ERROR: Certificate operation cannot be completed: Unable to communicate with CMS (503) Looks like this is an HTTP error; so is it possible that my IPA thinks it has a CA but there's no CMS available? On 04/26/2017 08:41 AM, Bret Wortman wrote: Using the firefox debugger, I get these errors when trying to pop up the New Certificate dialog: Empty string passed to getElementById(). (5) jquery.js:4:1060 TypeError: u is undefined app.js:1:362059 Empty string passed to getElementById(). (5) jquery.js:4:1060 TypeError: t is undefined app.js:1:217432 I'm definitely not a web kind of guy so I'm not sure if this is helpful or not. This is on 4.4.0, API Version 2.213. Bret On 04/26/2017 08:35 AM, Bret Wortman wrote: Good news. One of my servers _does_ have CA installed. So why does "Action -> New Certificate" not do anything on this or any other server? Bret On 04/25/2017 02:52 PM, Bret Wortman wrote: I recently had to upgrade all my Fedora IPA servers to C7. It went well, and we've been up and running nicely on 4.4.0 on C7 for the past month or so. Today, someone came and asked me to generate a new certificate for their web server. All was good until I went to the IPA UI and tried to perform Actions->New Certificate, which did nothing. I tried each of our 3 servers in turn. All came back with no popup window and no error, either. I suspect the problem might be that we no longer have a CA server due to the method I used to upgrade the servers. I likely missed a "--setup-ca" in there somewhere, so my rolling update rolled over the CA. What's my best hope of recovery? I never ran this before, so I'm not sure if this shows that I'm missing a CA or not: # ipa ca-find 1 CA matched Name: ipa Description IPA CA Authority ID: 3ce3346[...] Subject DN: CN=Certificate Authority, O=DAMASCUSGRP.COM Issuer DN: CN=Certificate Authority,O=DAMASCUSGRP.COM Number of entries returned 1 # ipa ca-add dg --desc "Damascus Group" --subject "CN=DG CA, O=DAMASCUSGRP.COM" ipa: ERROR: Failed to authenticate to CA REST API # klist Ticket cache: KEYRING:persistent:0:0 Default principal: ad...@damascusgrp.com Valid starting Expires Service principal 04/25/2017 18:48:26 04/26/2017 18:48:21 krbtgt/damascusgrp@damascusgrp.com # What's my best path of recovery? -- *Bret Wortman* The Damascus Group -- Petr Vobornik Associate Manager, Engineering, Identity Management Red Hat -- Manage your subscription for the Freeipa-users mailing list: https://www.redhat.com/mailman/listinfo/freeipa-users Go to http://freeipa.org for more info on the project
Re: [Freeipa-users] I think I lost my CA...
The closest I found was this: [02/May/2017:14:33:57][localhost-startStop-1]: No rule can be found for publishing: cacert [02/May/2017:14:33:37][localhost-startStop-1]: published ca cert [02/May/2017:14:33:37][localhost-startStop-1]: CMSEngine: ca startup done On 05/02/2017 10:50 AM, Bret Wortman wrote: I plowed through /var/log/pki/pki-tomcat/ca/debug, but nothing jumps out as looking like an error. The cert-show failure is troubling, but my inability to get CSRs turned into certs is what's actually driving this. Bret On 04/26/2017 06:02 PM, Rob Crittenden wrote: Bret Wortman wrote: So I can see my certs using cert-find, but can't get details using cert-show or add new ones using cert-request. # ipa cert-find : -- Number of entries returned 385 -- # ipa cert-show 895 ipa: ERROR: Certificate operation cannot be completed: Unable to communicate with CMS (503) # ipa cert-show 1 (which does not exist) ipa: ERROR: Certificate operation cannot be completed: Unable to communicate with CMS (503) # ipa cert-status 895 ipa: ERROR: Certificate operation cannot be completed: Unable to communicate with CMS (503) # Is this an IPV6 thing? Because ipactl shows everything green and certmonger is running. Doubtful. cert-find and cert-show use different APIs in dogtag. cert-find uses the newer RESTful API and cert-show uses the older XML-based API (and is authenticated). I'm guessing that is where the issue lies. What I'd recommend doing is noting the time, restarting the CA, and then plow through the debug log looking for failures. It could be that the CA is only partially up (and I'd check your CA subsystem certs as well). rob Bret On 04/26/2017 09:03 AM, Bret Wortman wrote: Digging still deeper: # ipa cert-request f.f --principal=HTTP/`hostname`@DAMASCUSGRP.COM ipa: ERROR: Certificate operation cannot be completed: Unable to communicate with CMS (503) Looks like this is an HTTP error; so is it possible that my IPA thinks it has a CA but there's no CMS available? On 04/26/2017 08:41 AM, Bret Wortman wrote: Using the firefox debugger, I get these errors when trying to pop up the New Certificate dialog: Empty string passed to getElementById(). (5) jquery.js:4:1060 TypeError: u is undefined app.js:1:362059 Empty string passed to getElementById(). (5) jquery.js:4:1060 TypeError: t is undefined app.js:1:217432 I'm definitely not a web kind of guy so I'm not sure if this is helpful or not. This is on 4.4.0, API Version 2.213. Bret On 04/26/2017 08:35 AM, Bret Wortman wrote: Good news. One of my servers _does_ have CA installed. So why does "Action -> New Certificate" not do anything on this or any other server? Bret On 04/25/2017 02:52 PM, Bret Wortman wrote: I recently had to upgrade all my Fedora IPA servers to C7. It went well, and we've been up and running nicely on 4.4.0 on C7 for the past month or so. Today, someone came and asked me to generate a new certificate for their web server. All was good until I went to the IPA UI and tried to perform Actions->New Certificate, which did nothing. I tried each of our 3 servers in turn. All came back with no popup window and no error, either. I suspect the problem might be that we no longer have a CA server due to the method I used to upgrade the servers. I likely missed a "--setup-ca" in there somewhere, so my rolling update rolled over the CA. What's my best hope of recovery? I never ran this before, so I'm not sure if this shows that I'm missing a CA or not: # ipa ca-find 1 CA matched Name: ipa Description IPA CA Authority ID: 3ce3346[...] Subject DN: CN=Certificate Authority, O=DAMASCUSGRP.COM Issuer DN: CN=Certificate Authority,O=DAMASCUSGRP.COM Number of entries returned 1 # ipa ca-add dg --desc "Damascus Group" --subject "CN=DG CA, O=DAMASCUSGRP.COM" ipa: ERROR: Failed to authenticate to CA REST API # klist Ticket cache: KEYRING:persistent:0:0 Default principal: ad...@damascusgrp.com Valid starting Expires Service principal 04/25/2017 18:48:26 04/26/2017 18:48:21 krbtgt/damascusgrp@damascusgrp.com # What's my best path of recovery? -- *Bret Wortman* The Damascus Group -- Manage your subscription for the Freeipa-users mailing list: https://www.redhat.com/mailman/listinfo/freeipa-users Go to http://freeipa.org for more info on the project
Re: [Freeipa-users] I think I lost my CA...
I plowed through /var/log/pki/pki-tomcat/ca/debug, but nothing jumps out as looking like an error. The cert-show failure is troubling, but my inability to get CSRs turned into certs is what's actually driving this. Bret On 04/26/2017 06:02 PM, Rob Crittenden wrote: Bret Wortman wrote: So I can see my certs using cert-find, but can't get details using cert-show or add new ones using cert-request. # ipa cert-find : -- Number of entries returned 385 -- # ipa cert-show 895 ipa: ERROR: Certificate operation cannot be completed: Unable to communicate with CMS (503) # ipa cert-show 1 (which does not exist) ipa: ERROR: Certificate operation cannot be completed: Unable to communicate with CMS (503) # ipa cert-status 895 ipa: ERROR: Certificate operation cannot be completed: Unable to communicate with CMS (503) # Is this an IPV6 thing? Because ipactl shows everything green and certmonger is running. Doubtful. cert-find and cert-show use different APIs in dogtag. cert-find uses the newer RESTful API and cert-show uses the older XML-based API (and is authenticated). I'm guessing that is where the issue lies. What I'd recommend doing is noting the time, restarting the CA, and then plow through the debug log looking for failures. It could be that the CA is only partially up (and I'd check your CA subsystem certs as well). rob Bret On 04/26/2017 09:03 AM, Bret Wortman wrote: Digging still deeper: # ipa cert-request f.f --principal=HTTP/`hostname`@DAMASCUSGRP.COM ipa: ERROR: Certificate operation cannot be completed: Unable to communicate with CMS (503) Looks like this is an HTTP error; so is it possible that my IPA thinks it has a CA but there's no CMS available? On 04/26/2017 08:41 AM, Bret Wortman wrote: Using the firefox debugger, I get these errors when trying to pop up the New Certificate dialog: Empty string passed to getElementById(). (5) jquery.js:4:1060 TypeError: u is undefined app.js:1:362059 Empty string passed to getElementById(). (5) jquery.js:4:1060 TypeError: t is undefined app.js:1:217432 I'm definitely not a web kind of guy so I'm not sure if this is helpful or not. This is on 4.4.0, API Version 2.213. Bret On 04/26/2017 08:35 AM, Bret Wortman wrote: Good news. One of my servers _does_ have CA installed. So why does "Action -> New Certificate" not do anything on this or any other server? Bret On 04/25/2017 02:52 PM, Bret Wortman wrote: I recently had to upgrade all my Fedora IPA servers to C7. It went well, and we've been up and running nicely on 4.4.0 on C7 for the past month or so. Today, someone came and asked me to generate a new certificate for their web server. All was good until I went to the IPA UI and tried to perform Actions->New Certificate, which did nothing. I tried each of our 3 servers in turn. All came back with no popup window and no error, either. I suspect the problem might be that we no longer have a CA server due to the method I used to upgrade the servers. I likely missed a "--setup-ca" in there somewhere, so my rolling update rolled over the CA. What's my best hope of recovery? I never ran this before, so I'm not sure if this shows that I'm missing a CA or not: # ipa ca-find 1 CA matched Name: ipa Description IPA CA Authority ID: 3ce3346[...] Subject DN: CN=Certificate Authority, O=DAMASCUSGRP.COM Issuer DN: CN=Certificate Authority,O=DAMASCUSGRP.COM Number of entries returned 1 # ipa ca-add dg --desc "Damascus Group" --subject "CN=DG CA, O=DAMASCUSGRP.COM" ipa: ERROR: Failed to authenticate to CA REST API # klist Ticket cache: KEYRING:persistent:0:0 Default principal: ad...@damascusgrp.com Valid starting Expires Service principal 04/25/2017 18:48:26 04/26/2017 18:48:21 krbtgt/damascusgrp@damascusgrp.com # What's my best path of recovery? -- *Bret Wortman* The Damascus Group -- Manage your subscription for the Freeipa-users mailing list: https://www.redhat.com/mailman/listinfo/freeipa-users Go to http://freeipa.org for more info on the project
Re: [Freeipa-users] I think I lost my CA...
Flo, I did find that issue and made those corrections to our /etc/hosts file, but the problem persists. Thanks for the idea! Bret On 04/27/2017 03:42 AM, Florence Blanc-Renaud wrote: On 04/26/2017 04:33 PM, Bret Wortman wrote: So I can see my certs using cert-find, but can't get details using cert-show or add new ones using cert-request. # ipa cert-find : -- Number of entries returned 385 -- # ipa cert-show 895 ipa: ERROR: Certificate operation cannot be completed: Unable to communicate with CMS (503) # ipa cert-show 1 (which does not exist) ipa: ERROR: Certificate operation cannot be completed: Unable to communicate with CMS (503) # ipa cert-status 895 ipa: ERROR: Certificate operation cannot be completed: Unable to communicate with CMS (503) # Is this an IPV6 thing? Because ipactl shows everything green and certmonger is running. Hi Bret, the issue looks similar to https://pagure.io/freeipa/issue/6575 and https://pagure.io/dogtagpki/issue/2570 which were IPv6 related. Note that IPv6 must be enabled on the machine but IPA does not require an IPv6 address to be configured (except for the loopback). You can check the following: - is PKI listening to port 8009 on IPv6 or IPv4 interface? sudo netstat -tunpl | grep 8009 tcp6 0 0 127.0.0.1:8009 :::* LISTEN 10749/java - /etc/pki/pki-tomcat/server.xml defines a redirection from port 8009 to 8443, and the "address" part is important: In the above example, it will be using localhost which can resolve either to IPv4 or IPv6. - /etc/hosts must define the loopback addresses with 127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4 ::1 localhost localhost.localdomain localhost6 localhost6.localdomain6 HTH, Flo. Bret On 04/26/2017 09:03 AM, Bret Wortman wrote: Digging still deeper: # ipa cert-request f.f --principal=HTTP/`hostname`@DAMASCUSGRP.COM ipa: ERROR: Certificate operation cannot be completed: Unable to communicate with CMS (503) Looks like this is an HTTP error; so is it possible that my IPA thinks it has a CA but there's no CMS available? On 04/26/2017 08:41 AM, Bret Wortman wrote: Using the firefox debugger, I get these errors when trying to pop up the New Certificate dialog: Empty string passed to getElementById(). (5) jquery.js:4:1060 TypeError: u is undefined app.js:1:362059 Empty string passed to getElementById(). (5) jquery.js:4:1060 TypeError: t is undefined app.js:1:217432 I'm definitely not a web kind of guy so I'm not sure if this is helpful or not. This is on 4.4.0, API Version 2.213. Bret On 04/26/2017 08:35 AM, Bret Wortman wrote: Good news. One of my servers _does_ have CA installed. So why does "Action -> New Certificate" not do anything on this or any other server? Bret On 04/25/2017 02:52 PM, Bret Wortman wrote: I recently had to upgrade all my Fedora IPA servers to C7. It went well, and we've been up and running nicely on 4.4.0 on C7 for the past month or so. Today, someone came and asked me to generate a new certificate for their web server. All was good until I went to the IPA UI and tried to perform Actions->New Certificate, which did nothing. I tried each of our 3 servers in turn. All came back with no popup window and no error, either. I suspect the problem might be that we no longer have a CA server due to the method I used to upgrade the servers. I likely missed a "--setup-ca" in there somewhere, so my rolling update rolled over the CA. What's my best hope of recovery? I never ran this before, so I'm not sure if this shows that I'm missing a CA or not: # ipa ca-find 1 CA matched Name: ipa Description IPA CA Authority ID: 3ce3346[...] Subject DN: CN=Certificate Authority, O=DAMASCUSGRP.COM Issuer DN: CN=Certificate Authority,O=DAMASCUSGRP.COM Number of entries returned 1 # ipa ca-add dg --desc "Damascus Group" --subject "CN=DG CA, O=DAMASCUSGRP.COM" ipa: ERROR: Failed to authenticate to CA REST API # klist Ticket cache: KEYRING:persistent:0:0 Default principal: ad...@damascusgrp.com Valid starting Expires Service principal 04/25/2017 18:48:26 04/26/2017 18:48:21 krbtgt/damascusgrp@damascusgrp.com # What's my best path of recovery? -- *Bret Wortman* The Damascus Group -- Manage your subscription for the Freeipa-users mailing list: https://www.redhat.com/mailman/listinfo/freeipa-users Go to http://freeipa.org for more info on the project
Re: [Freeipa-users] I think I lost my CA...
On 04/26/2017 04:33 PM, Bret Wortman wrote: So I can see my certs using cert-find, but can't get details using cert-show or add new ones using cert-request. # ipa cert-find : -- Number of entries returned 385 -- # ipa cert-show 895 ipa: ERROR: Certificate operation cannot be completed: Unable to communicate with CMS (503) # ipa cert-show 1 (which does not exist) ipa: ERROR: Certificate operation cannot be completed: Unable to communicate with CMS (503) # ipa cert-status 895 ipa: ERROR: Certificate operation cannot be completed: Unable to communicate with CMS (503) # Is this an IPV6 thing? Because ipactl shows everything green and certmonger is running. Hi Bret, the issue looks similar to https://pagure.io/freeipa/issue/6575 and https://pagure.io/dogtagpki/issue/2570 which were IPv6 related. Note that IPv6 must be enabled on the machine but IPA does not require an IPv6 address to be configured (except for the loopback). You can check the following: - is PKI listening to port 8009 on IPv6 or IPv4 interface? sudo netstat -tunpl | grep 8009 tcp6 0 0 127.0.0.1:8009 :::* LISTEN 10749/java - /etc/pki/pki-tomcat/server.xml defines a redirection from port 8009 to 8443, and the "address" part is important: In the above example, it will be using localhost which can resolve either to IPv4 or IPv6. - /etc/hosts must define the loopback addresses with 127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4 ::1 localhost localhost.localdomain localhost6 localhost6.localdomain6 HTH, Flo. Bret On 04/26/2017 09:03 AM, Bret Wortman wrote: Digging still deeper: # ipa cert-request f.f --principal=HTTP/`hostname`@DAMASCUSGRP.COM ipa: ERROR: Certificate operation cannot be completed: Unable to communicate with CMS (503) Looks like this is an HTTP error; so is it possible that my IPA thinks it has a CA but there's no CMS available? On 04/26/2017 08:41 AM, Bret Wortman wrote: Using the firefox debugger, I get these errors when trying to pop up the New Certificate dialog: Empty string passed to getElementById(). (5) jquery.js:4:1060 TypeError: u is undefined app.js:1:362059 Empty string passed to getElementById(). (5) jquery.js:4:1060 TypeError: t is undefined app.js:1:217432 I'm definitely not a web kind of guy so I'm not sure if this is helpful or not. This is on 4.4.0, API Version 2.213. Bret On 04/26/2017 08:35 AM, Bret Wortman wrote: Good news. One of my servers _does_ have CA installed. So why does "Action -> New Certificate" not do anything on this or any other server? Bret On 04/25/2017 02:52 PM, Bret Wortman wrote: I recently had to upgrade all my Fedora IPA servers to C7. It went well, and we've been up and running nicely on 4.4.0 on C7 for the past month or so. Today, someone came and asked me to generate a new certificate for their web server. All was good until I went to the IPA UI and tried to perform Actions->New Certificate, which did nothing. I tried each of our 3 servers in turn. All came back with no popup window and no error, either. I suspect the problem might be that we no longer have a CA server due to the method I used to upgrade the servers. I likely missed a "--setup-ca" in there somewhere, so my rolling update rolled over the CA. What's my best hope of recovery? I never ran this before, so I'm not sure if this shows that I'm missing a CA or not: # ipa ca-find 1 CA matched Name: ipa Description IPA CA Authority ID: 3ce3346[...] Subject DN: CN=Certificate Authority, O=DAMASCUSGRP.COM Issuer DN: CN=Certificate Authority,O=DAMASCUSGRP.COM Number of entries returned 1 # ipa ca-add dg --desc "Damascus Group" --subject "CN=DG CA, O=DAMASCUSGRP.COM" ipa: ERROR: Failed to authenticate to CA REST API # klist Ticket cache: KEYRING:persistent:0:0 Default principal: ad...@damascusgrp.com Valid starting Expires Service principal 04/25/2017 18:48:26 04/26/2017 18:48:21 krbtgt/damascusgrp@damascusgrp.com # What's my best path of recovery? -- *Bret Wortman* The Damascus Group -- Manage your subscription for the Freeipa-users mailing list: https://www.redhat.com/mailman/listinfo/freeipa-users Go to http://freeipa.org for more info on the project
Re: [Freeipa-users] I think I lost my CA...
Bret Wortman wrote: > So I can see my certs using cert-find, but can't get details using > cert-show or add new ones using cert-request. > > # ipa cert-find > : > -- > Number of entries returned 385 > -- > # ipa cert-show 895 > ipa: ERROR: Certificate operation cannot be completed: Unable to > communicate with CMS (503) > # ipa cert-show 1 (which does not exist) > ipa: ERROR: Certificate operation cannot be completed: Unable to > communicate with CMS (503) > # ipa cert-status 895 > ipa: ERROR: Certificate operation cannot be completed: Unable to > communicate with CMS (503) > # > > Is this an IPV6 thing? Because ipactl shows everything green and > certmonger is running. Doubtful. cert-find and cert-show use different APIs in dogtag. cert-find uses the newer RESTful API and cert-show uses the older XML-based API (and is authenticated). I'm guessing that is where the issue lies. What I'd recommend doing is noting the time, restarting the CA, and then plow through the debug log looking for failures. It could be that the CA is only partially up (and I'd check your CA subsystem certs as well). rob > > Bret > > > On 04/26/2017 09:03 AM, Bret Wortman wrote: >> >> Digging still deeper: >> >> # ipa cert-request f.f --principal=HTTP/`hostname`@DAMASCUSGRP.COM >> ipa: ERROR: Certificate operation cannot be completed: Unable to >> communicate with CMS (503) >> >> Looks like this is an HTTP error; so is it possible that my IPA thinks >> it has a CA but there's no CMS available? >> >> >> On 04/26/2017 08:41 AM, Bret Wortman wrote: >>> >>> Using the firefox debugger, I get these errors when trying to pop up >>> the New Certificate dialog: >>> >>> Empty string passed to getElementById(). (5) >>> jquery.js:4:1060 >>> TypeError: u is undefined >>> app.js:1:362059 >>> Empty string passed to getElementById(). (5) >>> jquery.js:4:1060 >>> TypeError: t is undefined >>> app.js:1:217432 >>> >>> I'm definitely not a web kind of guy so I'm not sure if this is >>> helpful or not. This is on 4.4.0, API Version 2.213. >>> >>> >>> Bret >>> >>> >>> On 04/26/2017 08:35 AM, Bret Wortman wrote: Good news. One of my servers _does_ have CA installed. So why does "Action -> New Certificate" not do anything on this or any other server? Bret On 04/25/2017 02:52 PM, Bret Wortman wrote: > > I recently had to upgrade all my Fedora IPA servers to C7. It went > well, and we've been up and running nicely on 4.4.0 on C7 for the > past month or so. > > Today, someone came and asked me to generate a new certificate for > their web server. All was good until I went to the IPA UI and tried > to perform Actions->New Certificate, which did nothing. I tried > each of our 3 servers in turn. All came back with no popup window > and no error, either. > > I suspect the problem might be that we no longer have a CA server > due to the method I used to upgrade the servers. I likely missed a > "--setup-ca" in there somewhere, so my rolling update rolled over > the CA. > > What's my best hope of recovery? I never ran this before, so I'm > not sure if this shows that I'm missing a CA or not: > > # ipa ca-find > > 1 CA matched > > Name: ipa > Description IPA CA > Authority ID: 3ce3346[...] > Subject DN: CN=Certificate Authority, O=DAMASCUSGRP.COM > Issuer DN: CN=Certificate Authority,O=DAMASCUSGRP.COM > > Number of entries returned 1 > > # ipa ca-add dg --desc "Damascus Group" --subject "CN=DG CA, > O=DAMASCUSGRP.COM" > ipa: ERROR: Failed to authenticate to CA REST API > # klist > Ticket cache: KEYRING:persistent:0:0 > Default principal: ad...@damascusgrp.com > > Valid starting Expires Service principal > 04/25/2017 18:48:26 04/26/2017 18:48:21 > krbtgt/damascusgrp@damascusgrp.com > # > > > What's my best path of recovery? > > -- > *Bret Wortman* > The Damascus Group > >>> >>> >>> >> >> >> > > > -- Manage your subscription for the Freeipa-users mailing list: https://www.redhat.com/mailman/listinfo/freeipa-users Go to http://freeipa.org for more info on the project
Re: [Freeipa-users] I think I lost my CA...
On 04/26/2017 10:22 AM, Rob Crittenden wrote: Bret Wortman wrote: Digging still deeper: # ipa cert-request f.f --principal=HTTP/`hostname`@DAMASCUSGRP.COM ipa: ERROR: Certificate operation cannot be completed: Unable to communicate with CMS (503) Looks like this is an HTTP error; so is it possible that my IPA thinks it has a CA but there's no CMS available? Apache proxies requests to the CA so there could be a mismatch I suppose. I'd ensure that the pki processes are running on the box for starters and then dig into the CA debug log for more details. Is that /var/log/pki/pki-tomcat/ca/debug? If so, then nothing happens in it during the above operations. As you noted, apache produces the following when trying to show a valid cert even though there's nothing in what I think is the pki ca debug log. ps aux shows pki processes alive, at least, and in ownership of the 8009 port (verified by lsof). [Wed Apr 26 14:38:48.157961 2017] [:error] [pid 15801] ipa: INFO: [jsonserver_session] ad...@damascusgrp.com: ping(): SUCCESS [Wed Apr 26 14:38:48.247040 2017] [proxy:error] [pid 15804] (111)Connection refused: AH00957: AJP: attempt to connect to 127.0.0.1:8009 (localhost) failed [Wed Apr 26 14:38:48.247072 2017] [proxy:error] [pid 15804] AH00959: ap_proxy_connect_)backend disabling worker for (localhost) for 60s [Wed Apr 26 14:38:48.247078 2017] [proxy_ajp:error] [pid 15804] [client 192.168.208.54:56618] AH00896: failed to make connection to backend: localhost [Wed Apr 26 14:38:48.247531 2017] [:error] [pid 15800] ipa: ERROR: ra.get_certificate(): Unable to communicate with CMS (503) [Wed Apr 26 14:38:48.247765 2017] [:error] [pid 15800] ipa: INFO: [jsonserver_session] ad...@damascusgrp.com: cert_show/1(u'895', version=u'2.213'): CertificateOperationError rob On 04/26/2017 08:41 AM, Bret Wortman wrote: Using the firefox debugger, I get these errors when trying to pop up the New Certificate dialog: Empty string passed to getElementById(). (5) jquery.js:4:1060 TypeError: u is undefined app.js:1:362059 Empty string passed to getElementById(). (5) jquery.js:4:1060 TypeError: t is undefined app.js:1:217432 I'm definitely not a web kind of guy so I'm not sure if this is helpful or not. This is on 4.4.0, API Version 2.213. Bret On 04/26/2017 08:35 AM, Bret Wortman wrote: Good news. One of my servers _does_ have CA installed. So why does "Action -> New Certificate" not do anything on this or any other server? Bret On 04/25/2017 02:52 PM, Bret Wortman wrote: I recently had to upgrade all my Fedora IPA servers to C7. It went well, and we've been up and running nicely on 4.4.0 on C7 for the past month or so. Today, someone came and asked me to generate a new certificate for their web server. All was good until I went to the IPA UI and tried to perform Actions->New Certificate, which did nothing. I tried each of our 3 servers in turn. All came back with no popup window and no error, either. I suspect the problem might be that we no longer have a CA server due to the method I used to upgrade the servers. I likely missed a "--setup-ca" in there somewhere, so my rolling update rolled over the CA. What's my best hope of recovery? I never ran this before, so I'm not sure if this shows that I'm missing a CA or not: # ipa ca-find 1 CA matched Name: ipa Description IPA CA Authority ID: 3ce3346[...] Subject DN: CN=Certificate Authority, O=DAMASCUSGRP.COM Issuer DN: CN=Certificate Authority,O=DAMASCUSGRP.COM Number of entries returned 1 # ipa ca-add dg --desc "Damascus Group" --subject "CN=DG CA, O=DAMASCUSGRP.COM" ipa: ERROR: Failed to authenticate to CA REST API # klist Ticket cache: KEYRING:persistent:0:0 Default principal: ad...@damascusgrp.com Valid starting Expires Service principal 04/25/2017 18:48:26 04/26/2017 18:48:21 krbtgt/damascusgrp@damascusgrp.com # What's my best path of recovery? -- *Bret Wortman* The Damascus Group -- Manage your subscription for the Freeipa-users mailing list: https://www.redhat.com/mailman/listinfo/freeipa-users Go to http://freeipa.org for more info on the project
Re: [Freeipa-users] I think I lost my CA...
So I can see my certs using cert-find, but can't get details using cert-show or add new ones using cert-request. # ipa cert-find : -- Number of entries returned 385 -- # ipa cert-show 895 ipa: ERROR: Certificate operation cannot be completed: Unable to communicate with CMS (503) # ipa cert-show 1 (which does not exist) ipa: ERROR: Certificate operation cannot be completed: Unable to communicate with CMS (503) # ipa cert-status 895 ipa: ERROR: Certificate operation cannot be completed: Unable to communicate with CMS (503) # Is this an IPV6 thing? Because ipactl shows everything green and certmonger is running. Bret On 04/26/2017 09:03 AM, Bret Wortman wrote: Digging still deeper: # ipa cert-request f.f --principal=HTTP/`hostname`@DAMASCUSGRP.COM ipa: ERROR: Certificate operation cannot be completed: Unable to communicate with CMS (503) Looks like this is an HTTP error; so is it possible that my IPA thinks it has a CA but there's no CMS available? On 04/26/2017 08:41 AM, Bret Wortman wrote: Using the firefox debugger, I get these errors when trying to pop up the New Certificate dialog: Empty string passed to getElementById(). (5) jquery.js:4:1060 TypeError: u is undefined app.js:1:362059 Empty string passed to getElementById(). (5) jquery.js:4:1060 TypeError: t is undefined app.js:1:217432 I'm definitely not a web kind of guy so I'm not sure if this is helpful or not. This is on 4.4.0, API Version 2.213. Bret On 04/26/2017 08:35 AM, Bret Wortman wrote: Good news. One of my servers _does_ have CA installed. So why does "Action -> New Certificate" not do anything on this or any other server? Bret On 04/25/2017 02:52 PM, Bret Wortman wrote: I recently had to upgrade all my Fedora IPA servers to C7. It went well, and we've been up and running nicely on 4.4.0 on C7 for the past month or so. Today, someone came and asked me to generate a new certificate for their web server. All was good until I went to the IPA UI and tried to perform Actions->New Certificate, which did nothing. I tried each of our 3 servers in turn. All came back with no popup window and no error, either. I suspect the problem might be that we no longer have a CA server due to the method I used to upgrade the servers. I likely missed a "--setup-ca" in there somewhere, so my rolling update rolled over the CA. What's my best hope of recovery? I never ran this before, so I'm not sure if this shows that I'm missing a CA or not: # ipa ca-find 1 CA matched Name: ipa Description IPA CA Authority ID: 3ce3346[...] Subject DN: CN=Certificate Authority, O=DAMASCUSGRP.COM Issuer DN: CN=Certificate Authority,O=DAMASCUSGRP.COM Number of entries returned 1 # ipa ca-add dg --desc "Damascus Group" --subject "CN=DG CA, O=DAMASCUSGRP.COM" ipa: ERROR: Failed to authenticate to CA REST API # klist Ticket cache: KEYRING:persistent:0:0 Default principal: ad...@damascusgrp.com Valid starting Expires Service principal 04/25/2017 18:48:26 04/26/2017 18:48:21 krbtgt/damascusgrp@damascusgrp.com # What's my best path of recovery? -- *Bret Wortman* The Damascus Group -- Manage your subscription for the Freeipa-users mailing list: https://www.redhat.com/mailman/listinfo/freeipa-users Go to http://freeipa.org for more info on the project
Re: [Freeipa-users] I think I lost my CA...
Bret Wortman wrote: > Digging still deeper: > > # ipa cert-request f.f --principal=HTTP/`hostname`@DAMASCUSGRP.COM > ipa: ERROR: Certificate operation cannot be completed: Unable to > communicate with CMS (503) > > Looks like this is an HTTP error; so is it possible that my IPA thinks > it has a CA but there's no CMS available? Apache proxies requests to the CA so there could be a mismatch I suppose. I'd ensure that the pki processes are running on the box for starters and then dig into the CA debug log for more details. rob > > > On 04/26/2017 08:41 AM, Bret Wortman wrote: >> >> Using the firefox debugger, I get these errors when trying to pop up >> the New Certificate dialog: >> >> Empty string passed to getElementById(). (5) >> jquery.js:4:1060 >> TypeError: u is undefined >> app.js:1:362059 >> Empty string passed to getElementById(). (5) >> jquery.js:4:1060 >> TypeError: t is undefined >> app.js:1:217432 >> >> I'm definitely not a web kind of guy so I'm not sure if this is >> helpful or not. This is on 4.4.0, API Version 2.213. >> >> >> Bret >> >> >> On 04/26/2017 08:35 AM, Bret Wortman wrote: >>> >>> Good news. One of my servers _does_ have CA installed. So why does >>> "Action -> New Certificate" not do anything on this or any other server? >>> >>> >>> Bret >>> >>> >>> On 04/25/2017 02:52 PM, Bret Wortman wrote: I recently had to upgrade all my Fedora IPA servers to C7. It went well, and we've been up and running nicely on 4.4.0 on C7 for the past month or so. Today, someone came and asked me to generate a new certificate for their web server. All was good until I went to the IPA UI and tried to perform Actions->New Certificate, which did nothing. I tried each of our 3 servers in turn. All came back with no popup window and no error, either. I suspect the problem might be that we no longer have a CA server due to the method I used to upgrade the servers. I likely missed a "--setup-ca" in there somewhere, so my rolling update rolled over the CA. What's my best hope of recovery? I never ran this before, so I'm not sure if this shows that I'm missing a CA or not: # ipa ca-find 1 CA matched Name: ipa Description IPA CA Authority ID: 3ce3346[...] Subject DN: CN=Certificate Authority, O=DAMASCUSGRP.COM Issuer DN: CN=Certificate Authority,O=DAMASCUSGRP.COM Number of entries returned 1 # ipa ca-add dg --desc "Damascus Group" --subject "CN=DG CA, O=DAMASCUSGRP.COM" ipa: ERROR: Failed to authenticate to CA REST API # klist Ticket cache: KEYRING:persistent:0:0 Default principal: ad...@damascusgrp.com Valid starting Expires Service principal 04/25/2017 18:48:26 04/26/2017 18:48:21 krbtgt/damascusgrp@damascusgrp.com # What's my best path of recovery? -- *Bret Wortman* The Damascus Group >>> >>> >>> >> >> >> > > > -- Manage your subscription for the Freeipa-users mailing list: https://www.redhat.com/mailman/listinfo/freeipa-users Go to http://freeipa.org for more info on the project
Re: [Freeipa-users] I think I lost my CA...
Digging still deeper: # ipa cert-request f.f --principal=HTTP/`hostname`@DAMASCUSGRP.COM ipa: ERROR: Certificate operation cannot be completed: Unable to communicate with CMS (503) Looks like this is an HTTP error; so is it possible that my IPA thinks it has a CA but there's no CMS available? On 04/26/2017 08:41 AM, Bret Wortman wrote: Using the firefox debugger, I get these errors when trying to pop up the New Certificate dialog: Empty string passed to getElementById(). (5) jquery.js:4:1060 TypeError: u is undefined app.js:1:362059 Empty string passed to getElementById(). (5) jquery.js:4:1060 TypeError: t is undefined app.js:1:217432 I'm definitely not a web kind of guy so I'm not sure if this is helpful or not. This is on 4.4.0, API Version 2.213. Bret On 04/26/2017 08:35 AM, Bret Wortman wrote: Good news. One of my servers _does_ have CA installed. So why does "Action -> New Certificate" not do anything on this or any other server? Bret On 04/25/2017 02:52 PM, Bret Wortman wrote: I recently had to upgrade all my Fedora IPA servers to C7. It went well, and we've been up and running nicely on 4.4.0 on C7 for the past month or so. Today, someone came and asked me to generate a new certificate for their web server. All was good until I went to the IPA UI and tried to perform Actions->New Certificate, which did nothing. I tried each of our 3 servers in turn. All came back with no popup window and no error, either. I suspect the problem might be that we no longer have a CA server due to the method I used to upgrade the servers. I likely missed a "--setup-ca" in there somewhere, so my rolling update rolled over the CA. What's my best hope of recovery? I never ran this before, so I'm not sure if this shows that I'm missing a CA or not: # ipa ca-find 1 CA matched Name: ipa Description IPA CA Authority ID: 3ce3346[...] Subject DN: CN=Certificate Authority, O=DAMASCUSGRP.COM Issuer DN: CN=Certificate Authority,O=DAMASCUSGRP.COM Number of entries returned 1 # ipa ca-add dg --desc "Damascus Group" --subject "CN=DG CA, O=DAMASCUSGRP.COM" ipa: ERROR: Failed to authenticate to CA REST API # klist Ticket cache: KEYRING:persistent:0:0 Default principal: ad...@damascusgrp.com Valid starting Expires Service principal 04/25/2017 18:48:26 04/26/2017 18:48:21 krbtgt/damascusgrp@damascusgrp.com # What's my best path of recovery? -- *Bret Wortman* The Damascus Group -- Manage your subscription for the Freeipa-users mailing list: https://www.redhat.com/mailman/listinfo/freeipa-users Go to http://freeipa.org for more info on the project
Re: [Freeipa-users] I think I lost my CA...
Using the firefox debugger, I get these errors when trying to pop up the New Certificate dialog: Empty string passed to getElementById(). (5) jquery.js:4:1060 TypeError: u is undefined app.js:1:362059 Empty string passed to getElementById(). (5) jquery.js:4:1060 TypeError: t is undefined app.js:1:217432 I'm definitely not a web kind of guy so I'm not sure if this is helpful or not. This is on 4.4.0, API Version 2.213. Bret On 04/26/2017 08:35 AM, Bret Wortman wrote: Good news. One of my servers _does_ have CA installed. So why does "Action -> New Certificate" not do anything on this or any other server? Bret On 04/25/2017 02:52 PM, Bret Wortman wrote: I recently had to upgrade all my Fedora IPA servers to C7. It went well, and we've been up and running nicely on 4.4.0 on C7 for the past month or so. Today, someone came and asked me to generate a new certificate for their web server. All was good until I went to the IPA UI and tried to perform Actions->New Certificate, which did nothing. I tried each of our 3 servers in turn. All came back with no popup window and no error, either. I suspect the problem might be that we no longer have a CA server due to the method I used to upgrade the servers. I likely missed a "--setup-ca" in there somewhere, so my rolling update rolled over the CA. What's my best hope of recovery? I never ran this before, so I'm not sure if this shows that I'm missing a CA or not: # ipa ca-find 1 CA matched Name: ipa Description IPA CA Authority ID: 3ce3346[...] Subject DN: CN=Certificate Authority, O=DAMASCUSGRP.COM Issuer DN: CN=Certificate Authority,O=DAMASCUSGRP.COM Number of entries returned 1 # ipa ca-add dg --desc "Damascus Group" --subject "CN=DG CA, O=DAMASCUSGRP.COM" ipa: ERROR: Failed to authenticate to CA REST API # klist Ticket cache: KEYRING:persistent:0:0 Default principal: ad...@damascusgrp.com Valid starting Expires Service principal 04/25/2017 18:48:26 04/26/2017 18:48:21 krbtgt/damascusgrp@damascusgrp.com # What's my best path of recovery? -- *Bret Wortman* The Damascus Group -- Manage your subscription for the Freeipa-users mailing list: https://www.redhat.com/mailman/listinfo/freeipa-users Go to http://freeipa.org for more info on the project
Re: [Freeipa-users] I think I lost my CA...
Good news. One of my servers _does_ have CA installed. So why does "Action -> New Certificate" not do anything on this or any other server? Bret On 04/25/2017 02:52 PM, Bret Wortman wrote: I recently had to upgrade all my Fedora IPA servers to C7. It went well, and we've been up and running nicely on 4.4.0 on C7 for the past month or so. Today, someone came and asked me to generate a new certificate for their web server. All was good until I went to the IPA UI and tried to perform Actions->New Certificate, which did nothing. I tried each of our 3 servers in turn. All came back with no popup window and no error, either. I suspect the problem might be that we no longer have a CA server due to the method I used to upgrade the servers. I likely missed a "--setup-ca" in there somewhere, so my rolling update rolled over the CA. What's my best hope of recovery? I never ran this before, so I'm not sure if this shows that I'm missing a CA or not: # ipa ca-find 1 CA matched Name: ipa Description IPA CA Authority ID: 3ce3346[...] Subject DN: CN=Certificate Authority, O=DAMASCUSGRP.COM Issuer DN: CN=Certificate Authority,O=DAMASCUSGRP.COM Number of entries returned 1 # ipa ca-add dg --desc "Damascus Group" --subject "CN=DG CA, O=DAMASCUSGRP.COM" ipa: ERROR: Failed to authenticate to CA REST API # klist Ticket cache: KEYRING:persistent:0:0 Default principal: ad...@damascusgrp.com Valid starting Expires Service principal 04/25/2017 18:48:26 04/26/2017 18:48:21 krbtgt/damascusgrp@damascusgrp.com # What's my best path of recovery? -- *Bret Wortman* The Damascus Group -- Manage your subscription for the Freeipa-users mailing list: https://www.redhat.com/mailman/listinfo/freeipa-users Go to http://freeipa.org for more info on the project
[Freeipa-users] I think I lost my CA...
I recently had to upgrade all my Fedora IPA servers to C7. It went well, and we've been up and running nicely on 4.4.0 on C7 for the past month or so. Today, someone came and asked me to generate a new certificate for their web server. All was good until I went to the IPA UI and tried to perform Actions->New Certificate, which did nothing. I tried each of our 3 servers in turn. All came back with no popup window and no error, either. I suspect the problem might be that we no longer have a CA server due to the method I used to upgrade the servers. I likely missed a "--setup-ca" in there somewhere, so my rolling update rolled over the CA. What's my best hope of recovery? I never ran this before, so I'm not sure if this shows that I'm missing a CA or not: # ipa ca-find 1 CA matched Name: ipa Description IPA CA Authority ID: 3ce3346[...] Subject DN: CN=Certificate Authority, O=DAMASCUSGRP.COM Issuer DN: CN=Certificate Authority,O=DAMASCUSGRP.COM Number of entries returned 1 # ipa ca-add dg --desc "Damascus Group" --subject "CN=DG CA, O=DAMASCUSGRP.COM" ipa: ERROR: Failed to authenticate to CA REST API # klist Ticket cache: KEYRING:persistent:0:0 Default principal: ad...@damascusgrp.com Valid starting Expires Service principal 04/25/2017 18:48:26 04/26/2017 18:48:21 krbtgt/damascusgrp@damascusgrp.com # What's my best path of recovery? -- *Bret Wortman* The Damascus Group -- Manage your subscription for the Freeipa-users mailing list: https://www.redhat.com/mailman/listinfo/freeipa-users Go to http://freeipa.org for more info on the project
