Re: [Freeswitch-users] WARNING On Inbound Call Question
If this is using prid it also requires the latest drivers from sangoma. I am pretty sure these are just in dev snapshots not release drivers yet. Something 3.5.8.6 or later iirc. Mike On Dec 21, 2009, at 7:52 PM, Brian West br...@freeswitch.org wrote: You know that warning is meaningless. Search the archives we have talked about this to no end it seems. And I'm sure Moy fixed this. /b On Dec 21, 2009, at 6:24 PM, Jerry Richards wrote: Okay, I upgraded to 1.0.5pre9 and tried this test again and I do not see the WARNING in the Freeswitch log. However, it still behaves the same way. That is, the internal callee rings for about 12 seconds, then stops ringing, and the PSTN caller just hears ringback for about 60 seconds and is not given the opportunity to leave voice mail. In contrast, an internal-to-internal call will go to voice mail after 30 seconds. I put a new 11595 log into the pastebin. Is there some Sangoma Wanpipe driver (or Freeswitch) setting that would correct this? Best Regards, Jerry ___ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch- users http://www.freeswitch.org ___ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Re: [Freeswitch-users] WARNING On Inbound Call Question
can you try the same thing with the latest trunk or pre-release tarball. On Tue, Nov 3, 2009 at 3:35 PM, Jerry Richards jerry.richa...@teotech.comwrote: I have my Freeswitch server with an installed Sangoma A101D card. Most everything works okay, however, when I get an inbound call from the PSTN, I see the following warning show up in the log. Additionally, the caller (on the PSTN) does not hear ringback, and if the call is not answered within about 12 seconds, the call ends (so it doesn't go to voice mail). If I make a call from one internal phone to another, then it will go to voice mail after 30 seconds. Here are the two warnings: [WARNING] ss7_boost_client.c:218 TX EVENT (N): CALL_START_ACK:(81) [w1g1] Rc=0 CSid=0 Seq=11 [WARNING] mod_openzap.c:761 VETO Changing state on 1:1 from PROGRESS to PROGRESS_MEDIA Here is the log of the warning upon an inbound call: freeswi...@teoproxy.greyhawk.tonecommander.com freeswi...@teoproxy.greyhawk.tonecommander.com freeswi...@teoproxy.greyhawk.tonecommander.com freeswi...@teoproxy.greyhawk.tonecommander.com freeswi...@teoproxy.greyhawk.tonecommander.com freeswi...@teoproxy.greyhawk.tonecommander.com freeswi...@teoproxy.greyhawk.tonecommander.com 2009-11-02 09:06:01.664835 [WARNING] ozmod_ss7_boost.c:1141 RX EVENT: CALL_START:(80) [w1g1] CSid=0 Seq=12 Cn=[N/A] Cd=[5384] Ci=[4253813176] 2009-11-02 09:06:01.665824 [DEBUG] ozmod_ss7_boost.c:655 Changing state on 1:1 from DOWN to RING 2009-11-02 09:06:01.665824 [DEBUG] ozmod_ss7_boost.c:841 1:1 STATE [RING] 2009-11-02 09:06:01.665824 [DEBUG] mod_openzap.c:1481 got clear channel sig [START] 2009-11-02 09:06:01.665824 [DEBUG] mod_openzap.c:344 Set codec PCMU 20ms 2009-11-02 09:06:01.665824 [DEBUG] mod_openzap.c:1184 Connect inbound channel OpenZAP/1:1/5384 2009-11-02 09:06:01.665824 [NOTICE] switch_channel.c:602 New Channel OpenZAP/1:1/5384 [b678f311-ab74-4cc1-afac-b83d89a53132] 2009-11-02 09:06:01.665824 [DEBUG] mod_openzap.c:1192 (OpenZAP/1:1/5384) State Change CS_NEW - CS_INIT 2009-11-02 09:06:01.665824 [DEBUG] switch_core_session.c:932 Send signal OpenZAP/1:1/5384 [BREAK] 2009-11-02 09:06:01.665824 [DEBUG] switch_core_state_machine.c:398 (OpenZAP/1:1/5384) Running State Change CS_INIT 2009-11-02 09:06:01.665824 [DEBUG] switch_core_state_machine.c:481 (OpenZAP/1:1/5384) State INIT 2009-11-02 09:06:01.665824 [DEBUG] mod_openzap.c:368 (OpenZAP/1:1/5384) State Change CS_INIT - CS_ROUTING 2009-11-02 09:06:01.665824 [DEBUG] switch_core_session.c:932 Send signal OpenZAP/1:1/5384 [BREAK] 2009-11-02 09:06:01.665824 [DEBUG] switch_core_state_machine.c:481 (OpenZAP/1:1/5384) State INIT going to sleep 2009-11-02 09:06:01.665824 [DEBUG] switch_core_state_machine.c:398 (OpenZAP/1:1/5384) Running State Change CS_ROUTING 2009-11-02 09:06:01.665824 [DEBUG] switch_core_state_machine.c:484 (OpenZAP/1:1/5384) State ROUTING 2009-11-02 09:06:01.665824 [DEBUG] mod_openzap.c:391 OpenZAP/1:1/5384 CHANNEL ROUTING 2009-11-02 09:06:01.665824 [DEBUG] switch_core_state_machine.c:78 OpenZAP/1:1/5384 Standard ROUTING 2009-11-02 09:06:01.665824 [INFO] mod_dialplan_xml.c:315 Processing 4253813176-5384 in context default Dialplan: OpenZAP/1:1/5384 parsing [default-unloop] continue=false Dialplan: OpenZAP/1:1/5384 Regex (PASS) [unloop] ${unroll_loops}(true) =~ /^true$/ break=on-false Dialplan: OpenZAP/1:1/5384 Regex (FAIL) [unloop] ${sip_looped_call}() =~ /^true$/ break=on-false Dialplan: OpenZAP/1:1/5384 parsing [default-tod_example] continue=true Dialplan: OpenZAP/1:1/5384 Absolute Condition [tod_example] Dialplan: OpenZAP/1:1/5384 Action set(open=true) Dialplan: OpenZAP/1:1/5384 parsing [default-SangomaPRI] continue=false Dialplan: OpenZAP/1:1/5384 Regex (FAIL) [SangomaPRI] destination_number(5384) =~ /^9(\d+)$/ break=on-false Dialplan: OpenZAP/1:1/5384 parsing [default-global-intercept] continue=false Dialplan: OpenZAP/1:1/5384 Regex (FAIL) [global-intercept] destination_number(5384) =~ /^(5380)$/ break=on-false Dialplan: OpenZAP/1:1/5384 parsing [default-group-intercept] continue=false Dialplan: OpenZAP/1:1/5384 Regex (FAIL) [group-intercept] destination_number(5384) =~ /^\*8$/ break=on-false Dialplan: OpenZAP/1:1/5384 parsing [default-intercept-ext] continue=false Dialplan: OpenZAP/1:1/5384 Regex (FAIL) [intercept-ext] destination_number(5384) =~ /^\*\*(\d+)$/ break=on-false Dialplan: OpenZAP/1:1/5384 parsing [default-redial] continue=false Dialplan: OpenZAP/1:1/5384 Regex (FAIL) [redial] destination_number(5384) =~ /^870$/ break=on-false Dialplan: OpenZAP/1:1/5384 parsing [default-global] continue=true Dialplan: OpenZAP/1:1/5384 Regex (FAIL) [global] ${call_debug}(false) =~ /^true$/ break=never Dialplan: OpenZAP/1:1/5384 Regex (FAIL) [global] ${sip_has_crypto}() =~ /^(AES_CM_128_HMAC_SHA1_32|AES_CM_128_HMAC_SHA1_80)$/ break=never Dialplan: OpenZAP/1:1/5384 Absolute Condition [global] Dialplan: OpenZAP/1:1/5384 Action
[Freeswitch-users] WARNING On Inbound Call Question
I have my Freeswitch server with an installed Sangoma A101D card. Most everything works okay, however, when I get an inbound call from the PSTN, I see the following warning show up in the log. Additionally, the caller (on the PSTN) does not hear ringback, and if the call is not answered within about 12 seconds, the call ends (so it doesn't go to voice mail). If I make a call from one internal phone to another, then it will go to voice mail after 30 seconds. Here are the two warnings: [WARNING] ss7_boost_client.c:218 TX EVENT (N): CALL_START_ACK:(81) [w1g1] Rc=0 CSid=0 Seq=11 [WARNING] mod_openzap.c:761 VETO Changing state on 1:1 from PROGRESS to PROGRESS_MEDIA Here is the log of the warning upon an inbound call: freeswi...@teoproxy.greyhawk.tonecommander.com freeswi...@teoproxy.greyhawk.tonecommander.com freeswi...@teoproxy.greyhawk.tonecommander.com freeswi...@teoproxy.greyhawk.tonecommander.com freeswi...@teoproxy.greyhawk.tonecommander.com freeswi...@teoproxy.greyhawk.tonecommander.com freeswi...@teoproxy.greyhawk.tonecommander.com 2009-11-02 09:06:01.664835 [WARNING] ozmod_ss7_boost.c:1141 RX EVENT: CALL_START:(80) [w1g1] CSid=0 Seq=12 Cn=[N/A] Cd=[5384] Ci=[4253813176] 2009-11-02 09:06:01.665824 [DEBUG] ozmod_ss7_boost.c:655 Changing state on 1:1 from DOWN to RING 2009-11-02 09:06:01.665824 [DEBUG] ozmod_ss7_boost.c:841 1:1 STATE [RING] 2009-11-02 09:06:01.665824 [DEBUG] mod_openzap.c:1481 got clear channel sig [START] 2009-11-02 09:06:01.665824 [DEBUG] mod_openzap.c:344 Set codec PCMU 20ms 2009-11-02 09:06:01.665824 [DEBUG] mod_openzap.c:1184 Connect inbound channel OpenZAP/1:1/5384 2009-11-02 09:06:01.665824 [NOTICE] switch_channel.c:602 New Channel OpenZAP/1:1/5384 [b678f311-ab74-4cc1-afac-b83d89a53132] 2009-11-02 09:06:01.665824 [DEBUG] mod_openzap.c:1192 (OpenZAP/1:1/5384) State Change CS_NEW - CS_INIT 2009-11-02 09:06:01.665824 [DEBUG] switch_core_session.c:932 Send signal OpenZAP/1:1/5384 [BREAK] 2009-11-02 09:06:01.665824 [DEBUG] switch_core_state_machine.c:398 (OpenZAP/1:1/5384) Running State Change CS_INIT 2009-11-02 09:06:01.665824 [DEBUG] switch_core_state_machine.c:481 (OpenZAP/1:1/5384) State INIT 2009-11-02 09:06:01.665824 [DEBUG] mod_openzap.c:368 (OpenZAP/1:1/5384) State Change CS_INIT - CS_ROUTING 2009-11-02 09:06:01.665824 [DEBUG] switch_core_session.c:932 Send signal OpenZAP/1:1/5384 [BREAK] 2009-11-02 09:06:01.665824 [DEBUG] switch_core_state_machine.c:481 (OpenZAP/1:1/5384) State INIT going to sleep 2009-11-02 09:06:01.665824 [DEBUG] switch_core_state_machine.c:398 (OpenZAP/1:1/5384) Running State Change CS_ROUTING 2009-11-02 09:06:01.665824 [DEBUG] switch_core_state_machine.c:484 (OpenZAP/1:1/5384) State ROUTING 2009-11-02 09:06:01.665824 [DEBUG] mod_openzap.c:391 OpenZAP/1:1/5384 CHANNEL ROUTING 2009-11-02 09:06:01.665824 [DEBUG] switch_core_state_machine.c:78 OpenZAP/1:1/5384 Standard ROUTING 2009-11-02 09:06:01.665824 [INFO] mod_dialplan_xml.c:315 Processing 4253813176-5384 in context default Dialplan: OpenZAP/1:1/5384 parsing [default-unloop] continue=false Dialplan: OpenZAP/1:1/5384 Regex (PASS) [unloop] ${unroll_loops}(true) =~ /^true$/ break=on-false Dialplan: OpenZAP/1:1/5384 Regex (FAIL) [unloop] ${sip_looped_call}() =~ /^true$/ break=on-false Dialplan: OpenZAP/1:1/5384 parsing [default-tod_example] continue=true Dialplan: OpenZAP/1:1/5384 Absolute Condition [tod_example] Dialplan: OpenZAP/1:1/5384 Action set(open=true) Dialplan: OpenZAP/1:1/5384 parsing [default-SangomaPRI] continue=false Dialplan: OpenZAP/1:1/5384 Regex (FAIL) [SangomaPRI] destination_number(5384) =~ /^9(\d+)$/ break=on-false Dialplan: OpenZAP/1:1/5384 parsing [default-global-intercept] continue=false Dialplan: OpenZAP/1:1/5384 Regex (FAIL) [global-intercept] destination_number(5384) =~ /^(5380)$/ break=on-false Dialplan: OpenZAP/1:1/5384 parsing [default-group-intercept] continue=false Dialplan: OpenZAP/1:1/5384 Regex (FAIL) [group-intercept] destination_number(5384) =~ /^\*8$/ break=on-false Dialplan: OpenZAP/1:1/5384 parsing [default-intercept-ext] continue=false Dialplan: OpenZAP/1:1/5384 Regex (FAIL) [intercept-ext] destination_number(5384) =~ /^\*\*(\d+)$/ break=on-false Dialplan: OpenZAP/1:1/5384 parsing [default-redial] continue=false Dialplan: OpenZAP/1:1/5384 Regex (FAIL) [redial] destination_number(5384) =~ /^870$/ break=on-false Dialplan: OpenZAP/1:1/5384 parsing [default-global] continue=true Dialplan: OpenZAP/1:1/5384 Regex (FAIL) [global] ${call_debug}(false) =~ /^true$/ break=never Dialplan: OpenZAP/1:1/5384 Regex (FAIL) [global] ${sip_has_crypto}() =~ /^(AES_CM_128_HMAC_SHA1_32|AES_CM_128_HMAC_SHA1_80)$/ break=never Dialplan: OpenZAP/1:1/5384 Absolute Condition [global] Dialplan: OpenZAP/1:1/5384 Action hash(insert/${domain_name}-spymap/${caller_id_number}/${uuid}) Dialplan: OpenZAP/1:1/5384 Action hash(insert/${domain_name}-last_dial/${caller_id_number}/${destination_numbe r}) Dialplan: OpenZAP/1:1/5384 Action hash(insert/${domain_name}-last_dial/global/${uuid})