Re: G4 MDD woes
Seems the CUDA and PMU switch are one and the same. I've tried the DIMMs one at a time, in each different slot and combination - they all check out but anything in slot 4 provokes a complete freeze. I've also done a sustem software 'archive and install' - no effect. I found a G4 'Apple Hardware Test' CD and tried that - it won't even run - boots into open firmware with the error message: Invalid memory access at %SRR0: 0661054c %SRR1: 0003030 Unless someone has a better idea, it seems I've acquired a paperweight. On May 27, 9:48 pm, John Carmonne carmo...@aol.com wrote: Just to be sure look near the battery? It's a real small grey button. -- You received this message because you are a member of G-Group, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to g3-5-list@googlegroups.com For more options, visit this group at http://groups.google.com/group/g3-5-list
Re: G4 MDD woes
On May 28, 2010, at 4:21 AM, eastofevelix wrote: Unless someone has a better idea, it seems I've acquired a paperweight. I think you're giving up too easily. I've seen a similar message to yours on my G5 before. My G5 is fine, I just had some RAM seated poorly. I reseated my RAM and everything was fine. It seems your problem is a RAM issue. It appears slot 4 is bad. Are you sure you've got the correct RAM? It takes PC2700 DDR. You can use PC3200 DDR also, but NOT PC2100 DDR. As for the AHT, are you sure you have the right version? I believe the correct version is 693-3994-A which should be printed on the disc. All versions are available for download here: http://www.info.apple.com/support/aht.html Also, on the resetting the PMU/CUDA, Apple has this article: http://support.apple.com/kb/ht1939 I've found the removing the PRAM battery and letting it sit overnight (or 15-20 minutes) without the battery can sometimes help. I normally press the CUDA immediately after removing the PRAM battery, and again before reinserting the PRAM battery. If the PRAM battery is dead, this can cause all sorts of strange problems, so being certain the PRAM battery is good is really important. I'd recommend reseating EVERYTHING (video card, ATA cables, etc.), and then burning a new copy of AHT. Then use a single stick of RAM that is KNOWN GOOD PC2700 DDR or PC3200 DDR, in the 1st RAM slot, and try booting the AHT disc using the Option key at startup. I think there's a good chance you can get this working perhaps? -- You received this message because you are a member of G-Group, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to g3-5-list@googlegroups.com For more options, visit this group at http://groups.google.com/group/g3-5-list
Re: G4 MDD woes
On May 28, 2010, at 3:02 AM, Kris Tilford wrote: On May 28, 2010, at 4:21 AM, eastofevelix wrote: Unless someone has a better idea, it seems I've acquired a paperweight. This machine is very easy to work on. a motherboard can be had cheap and relacement isn't too hard. If you've eliminated all the other possiblities, Have you claened all the power cable connections? Otherwise if a bad ram slot is the culprit then I'd be getting a motherborad. John Carmonne Yorba Linda USA Sent from my MBP -- You received this message because you are a member of G-Group, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to g3-5-list@googlegroups.com For more options, visit this group at http://groups.google.com/group/g3-5-list
Re: G3 Blue and White
On May 27, 6:34 pm, Jeffrey Engle macgu...@gmail.com wrote: more info on it Sonnet - Encore/ZIF G4: Power Mac G3 G4 Processor Upgrade Card Yes, The Encore/ZIF is the correct upgrade. The G4 is slightly faster than the G3 on some things. However, 10.3 and up makes use of the G4's Altivec for the desktop from what I understand. Good luck. -- You received this message because you are a member of G-Group, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to g3-5-list@googlegroups.com For more options, visit this group at http://groups.google.com/group/g3-5-list
Re: G3 Blue and White
On May 27, 6:33 pm, Jeffrey Engle macgu...@gmail.com wrote: Will the sonnet card below work? 20 bucks? shipped? FS:Sonnet Encore/Zif G4 500 Mhz 1 Mb Proc Upgrade Card Auto Bus Part #: EG4-500-1M The Sonnet G4 500 is one of the best available upgrades for a BW or Yikes. -- You received this message because you are a member of G-Group, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to g3-5-list@googlegroups.com For more options, visit this group at http://groups.google.com/group/g3-5-list
Re: G3 Blue and White
On May 28, 4:55 pm, dc dbc...@verizon.net wrote: The Sonnet G4 500 is one of the best available upgrades for a BW or Yikes. The OP needs to make sure he runs the 3rd party patch to allow the G4 to work in the G3 tho. Almost forgot that. -- You received this message because you are a member of G-Group, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to g3-5-list@googlegroups.com For more options, visit this group at http://groups.google.com/group/g3-5-list
G4 MDD Dual 1.42 upgrade
Hi All I have a G4 MDD Dual 1.25. I would like to know if I can put a Dual 1.42 processor in it. And if so will it still boot OS 9? If not has anyone used the Sonnet Dual 1.8? JOHN CARMONNE Yorba Linda USA From TiBook 800 -- You received this message because you are a member of G-Group, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to g3-5-list@googlegroups.com For more options, visit this group at http://groups.google.com/group/g3-5-list
Re: G4 MDD Dual 1.42 upgrade
On May 28, 2010, at 4:32 PM, JOHN CARMONNE wrote: Hi All I have a G4 MDD Dual 1.25. I would like to know if I can put a Dual 1.42 processor in it. And if so will it still boot OS 9? If not has anyone used the Sonnet Dual 1.8? I'm assuming if the logic board is fw400 only, it should boot OS9 even if the processors are upgraded? waiting for others to chime in. Jeff -- You received this message because you are a member of G-Group, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to g3-5-list@googlegroups.com For more options, visit this group at http://groups.google.com/group/g3-5-list
Re: G4 MDD Dual 1.42 upgrade
On May 28, 2010, at 4:49 PM, Jeffrey Engle wrote: On May 28, 2010, at 4:32 PM, JOHN CARMONNE wrote: Hi All I have a G4 MDD Dual 1.25. I would like to know if I can put a Dual 1.42 processor in it. And if so will it still boot OS 9? If not has anyone used the Sonnet Dual 1.8? I'm assuming if the logic board is fw400 only, it should boot OS9 even if the processors are upgraded? waiting for others to chime in. Jeff It appears by some pictures to be the same physical form. But they were in the FW800 machines so I wonder if it would fit?? My MDD is a FW400.Originaly a Dual 1.0 and I upgraded it to a Dual 1.25 I have to be able to boot OS 9. JOHN CARMONNE Yorba Linda USA carmo...@aol,com -- You received this message because you are a member of G-Group, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to g3-5-list@googlegroups.com For more options, visit this group at http://groups.google.com/group/g3-5-list
QuickTime web download issue-what happened?
Greetings all, Hope this is the right place to ask this. Once upon a time (NOT too long ago!), I was able to download any QT-based movie snip (news items or instructional videos for software, for ex.) on Safari by simply waiting for the page to load, then right-clicking the panel and a save to desktop choice was made available. Not so anymore; the latest update combo of Safari and QuickTime Pro (in Leopard 10.5.8, btw) has severed that option. Now when i right-click I get an Open in Dashboard selection - *big whoop* (still doesn't allow an actual save of the movie). Can anyone offer an explanation, and maybe, a plug-in that restores this very helpful save file option? Many thanks, Dana -- You received this message because you are a member of G-Group, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to g3-5-list@googlegroups.com For more options, visit this group at http://groups.google.com/group/g3-5-list
Re: G3 Blue and White
What patch is that? On May 28, 6:23 pm, Larry Stotler larrystot...@gmail.com wrote: On May 28, 4:55 pm, dc dbc...@verizon.net wrote: The Sonnet G4 500 is one of the best available upgrades for a BW or Yikes. The OP needs to make sure he runs the 3rd party patch to allow the G4 to work in the G3 tho. Almost forgot that. -- You received this message because you are a member of G-Group, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to g3-5-list@googlegroups.com For more options, visit this group at http://groups.google.com/group/g3-5-list