[gentoo-user] Is there an Apache configuration guide for gentoo?
I want my http server to listen on port 8181, and I want to configure userdir. /etc/conf.d/apache2 APACHE2_OPTS=-D USERDIR added Listen 8181 to /etc/apache2/http.conf /etc/apache2/modules.d/00_mod_userdir.conf # Control access to UserDir directories. The following is an example # for a site where these directories are restricted to read-only. Directory /home/*/public_html AllowOverride FileInfo AuthConfig Limit Indexes Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec Limit GET POST OPTIONS Order allow,deny Allow from all /Limit LimitExcept GET POST OPTIONS Order deny,allow Deny from all /LimitExcept /Directory so if it is read only why can't I read? You don't have permission to access /~david16/ on this server Dave
Re: [gentoo-user] Is there an Apache configuration guide for gentoo?
Am Sonntag 04 Oktober 2009 08:28:16 schrieb David Juhl: so if it is read only why can't I read? You don't have permission to access /~david16/ on this server Does the user that runs the server process have permissions to read from tha directory? Bye... Dirk
Re: [gentoo-user] PostgreSQL server blocker
Stroller wrote: Hi there, !!! The following installed packages are masked: - dev-db/postgresql-8.1.11 (masked by: package.mask) /usr/portage/profiles/package.mask: # Patrick Lauer patr...@gentoo.org (03 Oct 2009) # Mask unsupported and obsolete postgres packages # Use postgresql-server (or postgresql-base) instead So just unemerge your dev-db/postgresql and try again. everything should be fine then. jusitn signature.asc Description: OpenPGP digital signature
Re: [gentoo-user] About layman... and the color output
Harry Putnam wrote: New to layman but after at least a semi-careful look thru man layman I don't find anything explaining what the different color asterisks mean. I didn't read every word but scanned the whole thing twice and did a few searchs like /color and /output But those didn't do much good. Anyone know what red/green/yellow signify... level of caution? green: official (developer or project overlay) yellow: unofficial (user overlay) red: you cannot use it because it uses a VCS you do not have installed. signature.asc Description: OpenPGP digital signature
Re: [gentoo-user] Is there an Apache configuration guide for gentoo?
On Sunday 04 October 2009, Dirk Heinrichs wrote: Am Sonntag 04 Oktober 2009 08:28:16 schrieb David Juhl: so if it is read only why can't I read? You don't have permission to access /~david16/ on this server Does the user that runs the server process have permissions to read from tha directory? Bye... Dirk Typically the directory would be owned by apache and the authentication on it will be controlled by the apache htpasswd mechanism. In your case you will need to set: Options FollowSymLinks AllowOverride All for each directory. The ownership of the files is less important - they can be owned by any user/root/apache/etc... BUT the permissions on the directory must be such so that all can access (x) and read (r) what's in it. I'm going from memory here, so you may need to try out things until you get it to work. -- Regards, Mick signature.asc Description: This is a digitally signed message part.
[gentoo-user] Bootup drops back to console from kdm
It must be a year or so now with all different kernels. On boot up kdm fires up, but within 5 seconds or so and while the use is busy entering their passwd on the kdm screen, it suddenly returns to the console. Alt+F7 brings them back to their kdm, but this behaviour is clearly wrong. I suspect that this is caused by dhcpcd getting an IP address, or vixie cron (the last two things shown on the console when the user gets dumped back on it) but I can't understand why these two services will cause such a problem on this machine, when other machines with the same services work fine. Any ideas on how to troubleshoot this one? I can't see anything amiss on dmesg, or messages/syslog. -- Regards, Mick signature.asc Description: This is a digitally signed message part.
[gentoo-user] No news today?
Hi, while emerging I was informed be this process about some new news: * IMPORTANT: 1 news items need reading for repository 'gentoo'. * Use eselect news to read news items. So I did solfire:/tmpeselct news zsh: command not found: eselct solfire:/tmpeselect news Usage: eselect news action options Standard actions: help Display help text usage Display usage information version Display version information Extra actions: count Display number of news items new Count unread news items (default) all Count all news items list List news items purge Purge read news read item...Read news items new Read unread news items (default) all Read all news items item Number of item (from 'list' action) --mboxOutput in mbox format --raw Output in raw format unread item... Mark read news items as unread again all Mark all news items as unread item Number of item (from 'list' action) solfire:/tmpeselect news all !!! Error: Action all unknown exiting solfire:/tmpeselect read new !!! Error: Can't load module read What did I wrong here? I reinstalled eselect just to get shure that in a proper state, but it does not help. I am older than 30, please help me crossing the road... ;) Have a nice weekend! mcc -- Please don't send me any Word- or Powerpoint-Attachments unless it's absolutely neccessary. - Send simply Text. See http://www.gnu.org/philosophy/no-word-attachments.html In a world without fences and walls nobody needs gates and windows.
Re: [gentoo-user] No news today?
meino.cra...@gmx.de schrieb: Hi, while emerging I was informed be this process about some new news: * IMPORTANT: 1 news items need reading for repository 'gentoo'. * Use eselect news to read news items. So I did solfire:/tmpeselct news zsh: command not found: eselct solfire:/tmpeselect news Usage: eselect news action options Standard actions: help Display help text usage Display usage information version Display version information Extra actions: count Display number of news items new Count unread news items (default) all Count all news items list List news items purge Purge read news read item...Read news items new Read unread news items (default) all Read all news items item Number of item (from 'list' action) --mboxOutput in mbox format --raw Output in raw format unread item... Mark read news items as unread again all Mark all news items as unread item Number of item (from 'list' action) solfire:/tmpeselect news all !!! Error: Action all unknown exiting solfire:/tmpeselect read new !!! Error: Can't load module read What did I wrong here? I reinstalled eselect just to get shure that in a proper state, but it does not help. I am older than 30, please help me crossing the road... ;) Have a nice weekend! mcc How about `eselect news read new` ;) signature.asc Description: OpenPGP digital signature
Re: [gentoo-user] No news today?
Am 04.10.2009 11:29, schrieb meino.cra...@gmx.de: solfire:/tmpeselect news all !!! Error: Action all unknown exiting solfire:/tmpeselect read new !!! Error: Can't load module read Hello, try eselect news read new or eselect news read all Greetings Sebastian
Re: [gentoo-user] Is there an Apache configuration guide for gentoo?
At Sun, 04 Oct 2009 10:04:13 +0100 Mick michaelkintz...@gmail.com wrote: On Sunday 04 October 2009, Dirk Heinrichs wrote: Am Sonntag 04 Oktober 2009 08:28:16 schrieb David Juhl: so if it is read only why can't I read? You don't have permission to access /~david16/ on this server Does the user that runs the server process have permissions to read from tha directory? Bye... Dirk Typically the directory would be owned by apache and the authentication on it will be controlled by the apache htpasswd mechanism. In your case you will need to set: Options FollowSymLinks AllowOverride All for each directory. The ownership of the files is less important - they can be owned by any user/root/apache/etc... BUT the permissions on the directory must be such so that all can access (x) and read (r) what's in it. I'm going from memory here, so you may need to try out things until you get it to work. You also need to set USERDIR in /etc/conf.d/apache2. APACHE2_OPTS=-D DEFAULT_VHOST -D INFO -D SSL -D SSL_DEFAULT_VHOST -D LANGUAGE -D USERDIR allan
[gentoo-user] No /dev/dvd after updating to kernel 2.6.31-gentoo-r1
Hi, after i updated my kernel to version 2.6.31-r1 (gentoo-sources) there is no device /dev/dvd. Before updating the kernel there was a device /dev/dvd linked to /dev/sr0. Which drivers / settings are required to enabel IDE CD-Rom devices? - Device Drivers - ATA/ATAPI/MFM/RLL support - generic ATA/ATAPI disk support Y - ATA disk support Y - lagacy /proc/ide/ support Y - AMD and nVidia IDE support Y I use a nVidia chipset - Include IDE/ATAPI CDROM support ?Do I need this? - SCSI device support - SCSI CDROM supportY - Enable vendor-specific extensions Y Thanks and best regards, Christoph
Re: [gentoo-user] No news today?
091004 Florian Philipp wrote: meino.cra...@gmx.de schrieb: solfire:/tmpeselect news solfire:/tmpeselect news all !!! Error: Action all unknown solfire:/tmpeselect read new !!! Error: Can't load module read What did I wrong here? How about `eselect news read new` ;) I just tried it: root:500 ~ eselect news read new No news is good news. Have a nice day everyone ... (grin) -- ,, SUPPORT ___//___, Philip Webb ELECTRIC /] [] [] [] [] []| Cities Centre, University of Toronto TRANSIT`-O--O---' purslowatchassdotutorontodotca
[gentoo-user] Xorg upgrade problem
Just upgraded X.Org X Server from 1.5.3 to 1.6.3.901 and all is not well. First problem noticed is that copy and paste in gnumeric isn't working. I used to be able to use the arrow keys to navigate, ctrl-c to copy and ctrl-v to paste. The paste operation isn't presently working. I rebuilt gnumeric, but it hasn't helped. 'cause of the gnumeric problem, I restarted X. It worked -- sort of. My screen resolution has dropped from 1280x1024 to 1024x768, which is not sufficient. I'm using a minimal xorg.conf -- no video and no screen details. My ASUS mobo has ATI Radeon X1200 support on it -- rather low end but totally adequate for my needs. A few weeks ago I encountered a similar resolution problem after restarting X. That was solved after discovering I had both x11-drivers/xf86-video-ati and x11-drivers/ati-drivers installed. I removed ati-drivers and all was good (until this upgrade). xrandr presently offers 1024x768 as maximum, which is the same as Xorg.0.log indicates. I have thoughts of downgrading to 1.5.3. Any better suggestions? Regards, David FWIW, I've attached the Xorg.0.log files for both 1.5.3 and 1.6.3
Re: [gentoo-user] Xorg upgrade problem
On Sonntag 04 Oktober 2009, David Relson wrote: I have thoughts of downgrading to 1.5.3. Any better suggestions? rebuilt all drivers. (oh, and your mail is suspiciously free of any attachments)
Re: [gentoo-user] PostgreSQL server blocker
On 4 Oct 2009, at 08:40, Justin wrote: Stroller wrote: Hi there, !!! The following installed packages are masked: - dev-db/postgresql-8.1.11 (masked by: package.mask) /usr/portage/profiles/package.mask: # Patrick Lauer patr...@gentoo.org (03 Oct 2009) # Mask unsupported and obsolete postgres packages # Use postgresql-server (or postgresql-base) instead So just unemerge your dev-db/postgresql and try again. everything should be fine then. Uh, if I unmerge dev-db/postgresql then I won't have the database backend that my accounts system depends upon. Did you read the part of my message where I said that: I'm running x86 (NOT ~x86), and all versions of postgresql-server are marked with a ~. ?? Stroller.
Re: [gentoo-user] No /dev/dvd after updating to kernel 2.6.31-gentoo-r1
On 4 Oct 2009, at 14:30, Christoph Schrauth wrote: ... after i updated my kernel to version 2.6.31-r1 (gentoo-sources) there is no device /dev/dvd. Before updating the kernel there was a device /dev/dvd linked to / dev/sr0. You don't state where there is any longer a /dev/sr0. Can't you just `mount -v /dev/sr0 /mnt/dvdrom` ? Stroller.
Re: [gentoo-user] PostgreSQL server blocker
Stroller wrote: On 4 Oct 2009, at 08:40, Justin wrote: Stroller wrote: Hi there, !!! The following installed packages are masked: - dev-db/postgresql-8.1.11 (masked by: package.mask) /usr/portage/profiles/package.mask: # Patrick Lauer patr...@gentoo.org (03 Oct 2009) # Mask unsupported and obsolete postgres packages # Use postgresql-server (or postgresql-base) instead So just unemerge your dev-db/postgresql and try again. everything should be fine then. Uh, if I unmerge dev-db/postgresql then I won't have the database backend that my accounts system depends upon. Did you read the part of my message where I said that: I'm running x86 (NOT ~x86), and all versions of postgresql-server are marked with a ~. ?? Stroller. You are right but the problem should be solved 'cause it isunmasked again. I couldn't imagine a dev masking something where there is no stable alternative. justin signature.asc Description: OpenPGP digital signature
Re: [gentoo-user] PostgreSQL server blocker
On 4 Oct 2009, at 15:54, Justin wrote: ... Did you read the part of my message where I said that: I'm running x86 (NOT ~x86), and all versions of postgresql-server are marked with a ~. You are right but the problem should be solved 'cause it isunmasked again. I couldn't imagine a dev masking something where there is no stable alternative. I've just synced and it still seems to be ~ only. Am I reading this wrong? http://packages.gentoo.org/package/dev-db/postgresql-server I'm thinking to file a no stable ebuild for PostgreSQL server, but I'm just cautious in case I'm overlooking something stupid and obvious. Stroller.
Re: [gentoo-user] No /dev/dvd after updating to kernel 2.6.31-gentoo-r1
On Sunday 04 October 2009 16:46:44 Stroller wrote: On 4 Oct 2009, at 14:30, Christoph Schrauth wrote: ... after i updated my kernel to version 2.6.31-r1 (gentoo-sources) there is no device /dev/dvd. Before updating the kernel there was a device /dev/dvd linked to / dev/sr0. You don't state where there is any longer a /dev/sr0. Can't you just `mount -v /dev/sr0 /mnt/dvdrom` ? Stroller. No i can't 'mount -v /dev/sr0 /mnt/dvdrom' because there is no device /dev/sr0 # mount -v /dev/sr0 /mnt/dvd mount: Es wurde kein Dateisystemtyp für /dev/sr0 angegeben Werde alle Dateisystemtypen probieren, die in /etc/filesystems oder /proc/filesystems aufgelistet sind Versuche # Versuche #vfat Versuche msdos mount: Gerätedatei /dev/sr0 existiert nicht Sorry for the german output. Finally it says /dev/sr0 is not existing! Christoph
Re: [gentoo-user] PostgreSQL server blocker
Stroller wrote: On 4 Oct 2009, at 15:54, Justin wrote: ... Did you read the part of my message where I said that: I'm running x86 (NOT ~x86), and all versions of postgresql-server are marked with a ~. You are right but the problem should be solved 'cause it isunmasked again. I couldn't imagine a dev masking something where there is no stable alternative. I've just synced and it still seems to be ~ only. Am I reading this wrong? http://packages.gentoo.org/package/dev-db/postgresql-server I'm thinking to file a no stable ebuild for PostgreSQL server, but I'm just cautious in case I'm overlooking something stupid and obvious. Stroller. You missunderstood me. The keyword situation is the same, means -doc and -base are stable but -server not. But the masking of dev-db/postgresql is reverted. So you will not have any problems. signature.asc Description: OpenPGP digital signature
Re: [gentoo-user] No /dev/dvd after updating to kernel 2.6.31-gentoo-r1
a.) make oldconfig solves most of the problems when updating your kernel b.) if the DVD drive is IDE, you will most likely need that IDE/ATAPI support, iirc Cheers Kad On Sun, Oct 4, 2009 at 8:09 AM, Christoph Schrauth schrauth-christ...@gmx.de wrote: On Sunday 04 October 2009 16:46:44 Stroller wrote: On 4 Oct 2009, at 14:30, Christoph Schrauth wrote: ... after i updated my kernel to version 2.6.31-r1 (gentoo-sources) there is no device /dev/dvd. Before updating the kernel there was a device /dev/dvd linked to / dev/sr0. You don't state where there is any longer a /dev/sr0. Can't you just `mount -v /dev/sr0 /mnt/dvdrom` ? Stroller. No i can't 'mount -v /dev/sr0 /mnt/dvdrom' because there is no device /dev/sr0 # mount -v /dev/sr0 /mnt/dvd mount: Es wurde kein Dateisystemtyp für /dev/sr0 angegeben Werde alle Dateisystemtypen probieren, die in /etc/filesystems oder /proc/filesystems aufgelistet sind Versuche # Versuche #vfat Versuche msdos mount: Gerätedatei /dev/sr0 existiert nicht Sorry for the german output. Finally it says /dev/sr0 is not existing! Christoph
Re: [gentoo-user] PostgreSQL server blocker
On 4 Oct 2009, at 16:13, Justin wrote: I'm running x86 (NOT ~x86), and all versions of postgresql-server are marked with a ~. You are right but the problem should be solved 'cause it isunmasked again. I couldn't imagine a dev masking something where there is no stable alternative. I've just synced and it still seems to be ~ only. Am I reading this wrong? http://packages.gentoo.org/package/dev-db/postgresql-server I'm thinking to file a no stable ebuild for PostgreSQL server, but I'm just cautious in case I'm overlooking something stupid and obvious. You missunderstood me. The keyword situation is the same, means -doc and -base are stable but -server not. But the masking of dev-db/ postgresql is reverted. So you will not have any problems. Thanks! You're right. Updating world now. :D I also checked dev-db/postgresql on packages.gentoo.org before posting, but I guess that must not be immediately updating. Stroller.
SOLVED Re: [gentoo-user] No /dev/dvd after updating to kernel 2.6.31-gentoo-r1
On Sunday 04 October 2009 17:19:08 Kyle Adams wrote: a.) make oldconfig solves most of the problems when updating your kernel b.) if the DVD drive is IDE, you will most likely need that IDE/ATAPI support, iirc Cheers Kad I solved the problem! I changed from - Device Drivers - ATA/ATAPI/MFM/RLL support - AMD and nVidia IDE support to - Device Drivers - ATA/ATAPI/MFM/RLL support - generic/default IDE chipset support and now there is the device /dev/sr0 .. Linux can be so easy ;) Thanks to Kad and Stroller Christoph
Re: [gentoo-user] Is there an Apache configuration guide for gentoo?
On Sun, 2009-10-04 at 08:40 -0400, Allan Gottlieb wrote: FollowSymLinks ls -l ... drwxr-xr-x 3 david16 apache112 2009-10-03 15:25 public_html groups ... wheel cron audio cdrom video cdrw apache usb users portage plugdev games david16 sambashare vboxusers wireshark luks stb-admin scanner fuse /etc/conf.d/apache2: APACHE2_OPTS=-D USERDIR -D INFO # APACHE2_OPTS=-D USERDIR -D DEFAULT_VHOST -D INFO -D SSL -D SSL_DEFAULT_VHOST -D LANGUAGE I assume it is safe to on put USERDIR because I don't need the others... still get You don't have permission to access /~david16/index.html on this server. Dave
Re: [gentoo-user] Xorg upgrade problem
On Sonntag 04 Oktober 2009, David Relson wrote: On Sun, 4 Oct 2009 16:29:43 +0200 Volker Armin Hemmann wrote: On Sonntag 04 Oktober 2009, David Relson wrote: I have thoughts of downgrading to 1.5.3. Any better suggestions? rebuilt all drivers. (oh, and your mail is suspiciously free of any attachments) Ah yes. The old trick. Hit send before adding attachments. They are attached now. (EE) RADEON(0): [dri] RADEONDRIGetVersion failed because of a version mismatch. [dri] radeon kernel module version is 8.55.2 but version 1.17.0 or newer is needed. [dri] Disabling DRI. sweet. You once upon a time installed the ati-driver package - maybe without using portage. And that is still hurting you. Step one: remove it. Step two: remove all related orphaned files. and a bit down: (II) RADEON(0): I2C device VGA-0:ddc2 registered at address 0xA0. (II) RADEON(0): I2C device VGA-0:ddc2 removed. (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0 (II) RADEON(0): I2C device VGA-0:E-EDID segment register registered at address 0x60. (II) RADEON(0): I2C device VGA-0:ddc2 registered at address 0xA0. Dac detection success (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 1 you see the difference? (II) RADEON(0): I2C device DVI-0:ddc2 registered at address 0xA0. (II) RADEON(0): I2C device DVI-0:ddc2 removed. (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0 invalid output device for dac detection finished output detect: 2 finished all detect I) RADEON(0): I2C device DVI-0:E-EDID segment register registered at address 0x60. (II) RADEON(0): I2C device DVI-0:ddc2 registered at address 0xA0. (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0 finished output detect: 2 finished all detect and more of that 1.6.3.901 and 1.5.3 detect different monitors attached it seems. And both complain about missing monitor sections. how about setting up a nice xorg.conf?
Re: [gentoo-user] Is there an Apache configuration guide for gentoo?
On Sunday 04 October 2009, David Juhl wrote: On Sun, 2009-10-04 at 08:40 -0400, Allan Gottlieb wrote: FollowSymLinks ls -l ... drwxr-xr-x 3 david16 apache112 2009-10-03 15:25 public_html groups ... wheel cron audio cdrom video cdrw apache usb users portage plugdev games david16 sambashare vboxusers wireshark luks stb-admin scanner fuse /etc/conf.d/apache2: APACHE2_OPTS=-D USERDIR -D INFO # APACHE2_OPTS=-D USERDIR -D DEFAULT_VHOST -D INFO -D SSL -D SSL_DEFAULT_VHOST -D LANGUAGE I assume it is safe to on put USERDIR because I don't need the others... Oops! Add: -D DEFAULT_VHOST in /etc/conf.d/apache2 and try again (assuming that you have configured your webserver as a vhost). -- Regards, Mick signature.asc Description: This is a digitally signed message part.
Re: SOLVED Re: [gentoo-user] No /dev/dvd after updating to kernel 2.6.31-gentoo-r1
if you need any more help, feel free to ping me. ^^ On Sun, Oct 4, 2009 at 9:03 AM, Christoph Schrauth schrauth-christ...@gmx.de wrote: On Sunday 04 October 2009 17:19:08 Kyle Adams wrote: a.) make oldconfig solves most of the problems when updating your kernel b.) if the DVD drive is IDE, you will most likely need that IDE/ATAPI support, iirc Cheers Kad I solved the problem! I changed from - Device Drivers - ATA/ATAPI/MFM/RLL support - AMD and nVidia IDE support to - Device Drivers - ATA/ATAPI/MFM/RLL support - generic/default IDE chipset support and now there is the device /dev/sr0 .. Linux can be so easy ;) Thanks to Kad and Stroller Christoph
Re: [gentoo-user] Kworldclock KDE 4.3.1
091002 Philip Webb wrote: Is it possible to get Marble to show the effects of Kworldclock ? Is there any other similar app from outside KDE ? -- Xearth shows light/dark, but not current local times AFAIK. I have submitted KDE bug 209458 to request current local times in Marble. BTW you can get day/night shading in Marble via 'satellite view - view - sun control - sun shading'. -- ,, SUPPORT ___//___, Philip Webb ELECTRIC /] [] [] [] [] []| Cities Centre, University of Toronto TRANSIT`-O--O---' purslowatchassdotutorontodotca
Re: [gentoo-user] Kworldclock KDE 4.3.1
On Fri, Oct 2, 2009 at 10:54 AM, Philip Webb purs...@ca.inter.net wrote: I asked this before without any response (smile). Kworldclock 3.5.10 is a useful little app, but is absent from 4.3.1 . It looks like a KDE4 version of kworldclock was around in early 4.0 days but has been removed due to the fact that it does not have a maintainer/anyone working on it. You can see the most recent sources (not touched in over a year) from here, maybe it might build against newer KDE4 versions. Let us know if you succeed. :) http://websvn.kde.org/tags/unmaintained/4/kworldclock/
Re: [gentoo-user] Re: preferred editor
On Sun, 4 Oct 2009 01:22:47 + (UTC), Grant Edwards grant.b.edwa...@gmail.com wrote: On 2009-10-03, Stroller strol...@stellar.eclipse.co.uk wrote: On 2 Oct 2009, at 17:16, Grant Edwards wrote: ... I don't like nano much either -- I find it rather clumsy, but at least it seems to be safe. It doesn't trash my file every 30 seconds when I start typing content while in command mode. Honestly -- I've used vi infrequently but regularly (probably several times a month) for decades, and my brain just doesn't work the way vi does. What editor do you prefer, then? I'm an emacs guy. I've been using emacs (or various clones such as jove and jed) for 25 years now. IIRC when I was at uni (c 2000) one of the TA's suggested Joe as an alternative to the traditional Unix editors. I have been making a little effort in the last year or two to come to grips with vi or vim, and am starting to prefer it, but ISTM that the problem with traditional Unix editors (i.e. vi emacs) is that they depend upon learning obscure keyboard shortcuts. I don't have any problem learning keystrokes. I do have problems with vi's modality. That's just one of the things I dislike about vi and all the vi clones out there. To me it is like the difference between edit to live and live to edit. It's a good editor and I respect people who like and use vi, but I refuse to use it unless there's absolutely no other option. -- Jesús Guerrero
[gentoo-user] Portage should rebuild kaffeine after libdvdcss installed?
Hello all, I was getting some Japanese-bought DVDs to play correctly on my laptop, and I found that I after I installed libdvdcss from portage, portage did not think to rebuild kaffeine (or mplayer, etc), but that was necessary to get full viewing functionality. In the first case, I wonder if libdvdcss should be pulled in by the dvd USE flag. Secondly, I think portage ought to be smart enough to know to rebuild programs in such a case. It's no big thing of course, but I wonder if anyone else has thoughts on this. Regards, daid
Re: [gentoo-user] Portage should rebuild kaffeine after libdvdcss installed?
On Mon, 5 Oct 2009 10:31:53 +0900, daid kahl daid...@gmail.com wrote: Hello all, I was getting some Japanese-bought DVDs to play correctly on my laptop, and I found that I after I installed libdvdcss from portage, portage did not think to rebuild kaffeine (or mplayer, etc), but that was necessary to get full viewing functionality. In the first case, I wonder if libdvdcss should be pulled in by the dvd USE flag. Secondly, I think portage ought to be smart enough to know to rebuild programs in such a case. Nope. What you have to do is to set up the correct use flags for xine-lib (dvd). All the dependencies will be pushed, you don't even have to implicitly install libdvdcss. When a given use flag is changed portage will detect and recompile all the required packages with a simple emerge -auDVN world. -- Jesús Guerrero
Re: [gentoo-user] Portage should rebuild kaffeine after libdvdcss installed?
Jesús Guerrero wrote: On Mon, 5 Oct 2009 10:31:53 +0900, daid kahl daid...@gmail.com wrote: Hello all, I was getting some Japanese-bought DVDs to play correctly on my laptop, and I found that I after I installed libdvdcss from portage, portage did not think to rebuild kaffeine (or mplayer, etc), but that was necessary to get full viewing functionality. In the first case, I wonder if libdvdcss should be pulled in by the dvd USE flag. Secondly, I think portage ought to be smart enough to know to rebuild programs in such a case. Nope. What you have to do is to set up the correct use flags for xine-lib (dvd). All the dependencies will be pushed, you don't even have to implicitly install libdvdcss. When a given use flag is changed portage will detect and recompile all the required packages with a simple emerge -auDVN world. I think this is a typo. The command should be emerge -auDvN world. The upper case V would only print the version of portage. That should therefore be a lower case v. I wish I could type better too. LOL After proofing a message a dozen times, I still find a boo boo after hitting the send button. :/ Maybe it is the keyboard? Dale :-) :-)
Re: [gentoo-user] Portage should rebuild kaffeine after libdvdcss installed?
On Sun, 04 Oct 2009 21:19:04 -0500, Dale rdalek1...@gmail.com wrote: Jesús Guerrero wrote: On Mon, 5 Oct 2009 10:31:53 +0900, daid kahl daid...@gmail.com wrote: Hello all, I was getting some Japanese-bought DVDs to play correctly on my laptop, and I found that I after I installed libdvdcss from portage, portage did not think to rebuild kaffeine (or mplayer, etc), but that was necessary to get full viewing functionality. In the first case, I wonder if libdvdcss should be pulled in by the dvd USE flag. Secondly, I think portage ought to be smart enough to know to rebuild programs in such a case. Nope. What you have to do is to set up the correct use flags for xine-lib (dvd). All the dependencies will be pushed, you don't even have to implicitly install libdvdcss. When a given use flag is changed portage will detect and recompile all the required packages with a simple emerge -auDVN world. I think this is a typo. The command should be emerge -auDvN world. The upper case V would only print the version of portage. That should therefore be a lower case v. Well spotted, yes, it's a typo. Thanks for the correction. :) -- Jesús Guerrero
[gentoo-user] [SOLVED] Re: device eth0 does not exist
Thanks for all the input. I have the network up again. I'm not exactly sure how. I've compiled the e1000 in the kernel. The only thing I've changed is this kernel option ... Device Drivers -- Network Device Support -- Ethernet 10 0r 100Mbit -- EISA,VLB, PCI and onboard controllers * I don't know if that's it, but I'm online again. I've been over menuconfig so many times I don't know which is up. Also, I apologise for my fragmented posting. I subscribed no-mail. P.S. I may be arcane, but I don't wear panties:) _ Get your FREE, LinuxWaves.com Email Now! -- http://www.LinuxWaves.com Join Linux Discussions! -- http://Community.LinuxWaves.com