Hi,
not on PE800 but on PE1300 with scsi disks and no raid controller,
the hardest thing to do was getting that poweredge boot off a livecd.
It didn't boot with the livecd untill I connected an old ide drive.
With that old drive the livecd boot was ok, then checked output of
dmesg, and I could use the scsi drives also. And the tape drive even
works, after change a scsi bios setting :)
I also found that the dell forums had quite a bit info about scsi and raid controllers and how to used them with linux.
Peter
On 8/3/05, Devraj Mukherjee [EMAIL PROTECTED] wrote:
Hi Everyone,Is there anyone out there who has installed Gentoo Linux on a DellPowerEdge 800 system with a CERC hardware RAID controller?If so what drivers are required?Devraj---Devraj Mukherjee (
[EMAIL PROTECTED])Eternity Technologies Pty. Ltd. ACN 107 600 975P O Box 5949 Wagga Wagga NSW 2650 AustraliaVoice: +61-2-69717131 / Fax: +61-2-69251039
http://www.eternitytechnologies.com/--gentoo-user@gentoo.org mailing list
-- I have plenty of common sense, I just choose to ignore it. --- Calvin
