Re: [gentoo-user] Getting direct rendering (DRI) to work with ATI 9550 video card
Ok! Thanks to all who offered suggestions. I finally got it working. Bottom line was, you need to re-emerge Xorg to get it working. I noticed this line while emerging xorg: * Switching to ati OpenGL interface... Regenerating /etc/ld.so.cache... I then re-emerged the ati-drivers which turned out to be a mistake. During my desperate attempts to get it working I forgot I had installed the drivers which I downloaded directly from ATI. So re-emerging the ati-drivers which are a few versions behind the official drivers caused a incompatible kernel module, direct rendering will not work error when starting X. No problem, I simply re-installed the drivers downloaded direct from ATI and now everything is working including direct rendering! I think some notes should be made on the ATI-FAQ about re-emerging Xorg. I'll send a note to wedge__ AT fastmail.fm. -- John Lange On Sat, 2005-09-03 at 04:38 +0200, Sergio Polini wrote: John Lange: Note the dates in: /usr/lib/modules/extensions/ -r--r--r-- 1 root root 16580 Apr 10 17:38 libdbe.a -r--r--r-- 1 root root 32470 Apr 10 17:38 libdri.a -r--r--r-- 1 root root 167396 Apr 10 17:38 libextmod.a -rwxr-xr-x 1 root root 651460 Apr 10 18:20 libglx.so.1.0.7174 -r--r--r-- 1 root root 25688 Apr 10 17:38 librecord.a -r--r--r-- 1 root root 39306 Apr 10 17:38 libxtrap.a nothing new in a while Does Xorg need to be re-emerged to get this working? I think so. My dates (as you can see in my previuos message) are Aug 6. Looking for Aug 06 in /var/log/emerge.log, I've found: - nvidia-kernel: not emerged on Aug 6 - nvidia-glx: not emerged on Aug 6 - opengl-update: not emerged on Aug 6 - xorg-x11-6.8.2-r2: emerged on Aug 6 HTH Sergio -- gentoo-user@gentoo.org mailing list
[gentoo-user] Getting direct rendering (DRI) to work with ATI 9550 video card
According to everything I've read, the ATI 9550 should be fully supported with Xorg. I have followed the steps in the Gentoo ATI FAQ to the letter (in fact several times over) and I simply can not get this card to work right. The log always reports DRI initialization failed! and my desktop is so slow I can watch most windows draw. If someone could have a look at my Xorg.log and give me a hint as to what might be wrong that would be greatly appreciated. The following 4 items are included inline to help with debugging. Please excuse their rather large size. 1) Xorg.log 2) lsmod 3) glxinfo 4) fglrxinfo -- X Window System Version 6.8.2 Release Date: 9 February 2005 X Protocol Version 11, Revision 0, Release 6.8.2 Build Operating System: Linux 2.6.11-gentoo-r3 i686 [ELF] Current Operating System: Linux ws50 2.6.11-gentoo-r3 #1 Mon Aug 22 19:11:13 CDT 2005 i686 Build Date: 10 April 2005 Before reporting problems, check http://wiki.X.Org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/Xorg.0.log, Time: Fri Sep 2 10:06:33 2005 (==) Using config file: /etc/X11/xorg.conf (==) ServerLayout Server Layout (**) |--Screen Screen0 (0) (**) | |--Monitor Monitor0 (**) | |--Device ATI Graphics Adapter (**) |--Input Device Mouse1 (**) |--Input Device Keyboard1 (**) FontPath set to /usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/ (**) RgbPath set to /usr/X11R6/lib/X11/rgb (==) ModulePath set to /usr/lib/modules (WW) Open APM failed (/dev/apm_bios) (No such device) (II) Module ABI versions: X.Org ANSI C Emulation: 0.2 X.Org Video Driver: 0.7 X.Org XInput driver : 0.4 X.Org Server Extension : 0.2 X.Org Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: bitmap (II) Loading /usr/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor=X.Org Foundation compiled for 6.8.2, module version = 1.0.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: pcidata (II) Loading /usr/lib/modules/libpcidata.a (II) Module pcidata: vendor=X.Org Foundation compiled for 6.8.2, module version = 1.0.0 ABI class: X.Org Video Driver, version 0.7 Using vt 7 (--) using VT number 7 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1039,0735 card , rev 01 class 06,00,00 hdr 80 (II) PCI: 00:01:0: chip 1039,0001 card , rev 00 class 06,04,00 hdr 01 (II) PCI: 00:02:0: chip 1039,0018 card , rev 00 class 06,01,00 hdr 80 (II) PCI: 00:02:1: chip 1039,0016 card , rev 00 class 0c,05,00 hdr 00 (II) PCI: 00:02:2: chip 1039,7001 card 1019,0a14 rev 07 class 0c,03,10 hdr 00 (II) PCI: 00:02:3: chip 1039,7001 card 1019,0a14 rev 07 class 0c,03,10 hdr 00 (II) PCI: 00:02:5: chip 1039,5513 card 1039,5513 rev d0 class 01,01,80 hdr 80 (II) PCI: 00:02:7: chip 1039,7012 card 1019,0a14 rev a0 class 04,01,00 hdr 00 (II) PCI: 00:03:0: chip 1039,0900 card 1019,0a14 rev 90 class 02,00,00 hdr 00 (II) PCI: 00:0b:0: chip 1102,0002 card 1102,8027 rev 06 class 04,01,00 hdr 80 (II) PCI: 00:0b:1: chip 1102,7002 card 1102,0020 rev 06 class 09,80,00 hdr 80 (II) PCI: 01:00:0: chip 1002,4153 card 174b,0200 rev 00 class 03,00,00 hdr 80 (II) PCI: 01:00:1: chip 1002,4173 card 174b,0201 rev 00 class 03,80,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000a (VGA_EN is set) (II) Bus 1 I/O range: [0] -1 0 0xa000 - 0xafff (0x1000) IX[B] (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xcfe0 - 0xcfef (0x10) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0 0x8fc0 - 0xcfcf (0x4010) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:2:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (--) PCI:*(1:0:0) ATI Technologies Inc unknown chipset (0x4153) rev 0, Mem @ 0xb000/28, 0xcfef/16, I/O @ 0xa800/8, BIOS @ 0xcfec/17 (--) PCI: (1:0:1) ATI Technologies Inc unknown chipset (0x4173) rev 0, Mem @ 0xa000/28, 0xcfee/16 (II) Addressable bus resource ranges are [0] -1 0
Re: [gentoo-user] Getting direct rendering (DRI) to work with ATI 9550 video card
Am Freitag, den 02.09.2005, 10:34 -0500 schrieb John Lange: The following 4 items are included inline to help with debugging. Please excuse their rather large size. 1) Xorg.log 2) lsmod 3) glxinfo 4) fglrxinfo I'm sorry but you forgot the real important file here: your xorg.conf -- Mit freundlichen Grüßen Heinz Sporn SPORN it-freelancing Mobile: ++43 (0)699 / 127 827 07 Email: [EMAIL PROTECTED] [EMAIL PROTECTED] Website: http://www.sporn-it.com Snail: Steyrer Str. 20 A-4540 Bad Hall Austria / Europe -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Getting direct rendering (DRI) to work with ATI 9550 video card
Ah, here it is as generated by fglrxconfig. --- # File: xorg.conf # File generated by fglrxconfig (C) ATI Research, a substitute for xf86config. # Note by ATI: the below copyright notice is there for servicing possibly # pending third party rights on the file format and the instance of this file. # # Copyright (c) 1999 by The XFree86 Project, Inc. # # Permission is hereby granted, free of charge, to any person obtaining a # copy of this software and associated documentation files (the Software), # to deal in the Software without restriction, including without limitation # the rights to use, copy, modify, merge, publish, distribute, sublicense, # and/or sell copies of the Software, and to permit persons to whom the # Software is furnished to do so, subject to the following conditions: # # The above copyright notice and this permission notice shall be included in # all copies or substantial portions of the Software. # # THE SOFTWARE IS PROVIDED AS IS, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL # THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE # SOFTWARE. # # Except as contained in this notice, the name of the XFree86 Project shall # not be used in advertising or otherwise to promote the sale, use or other # dealings in this Software without prior written authorization from the # XFree86 Project. # # ** # Refer to the XF86Config(4/5) man page for details about the format of # this file. # ** # ** # DRI Section # ** Section dri # Access to OpenGL ICD is allowed for all users: Mode 0666 # Access to OpenGL ICD is restricted to a specific user group: #Group 100# users #Mode 0660 EndSection # ** # Module section -- this section is used to specify # which dynamically loadable modules to load. # ** # Section Module # This loads the DBE extension module. Loaddbe # Double buffer extension # This loads the miscellaneous extensions module, and disables # initialisation of the XFree86-DGA extension within that module. SubSection extmod Optionomit xfree86-dga # don't initialise the DGA extension EndSubSection # This loads the Type1 and FreeType font modules Loadtype1 Loadfreetype # This loads the GLX module Loadglx # libglx.so Loaddri # libdri.a EndSection # ** # Files section. This allows default font and rgb paths to be set # ** Section Files # The location of the RGB database. Note, this is the name of the # file minus the extension (like .txt or .db). There is normally # no need to change the default. RgbPath /usr/X11R6/lib/X11/rgb # Multiple FontPath entries are allowed (which are concatenated together), # as well as specifying multiple comma-separated entries in one FontPath # command (or a combination of both methods) # # If you don't have a floating point coprocessor and emacs, Mosaic or other # programs take long to start up, try moving the Type1 and Speedo directory # to the end of this list (or comment them out). # FontPath /usr/X11R6/lib/X11/fonts/local/ FontPath /usr/X11R6/lib/X11/fonts/misc/ FontPath /usr/X11R6/lib/X11/fonts/75dpi/:unscaled FontPath /usr/X11R6/lib/X11/fonts/100dpi/:unscaled FontPath /usr/X11R6/lib/X11/fonts/Type1/ #FontPath /usr/X11R6/lib/X11/fonts/Speedo/ FontPath /usr/X11R6/lib/X11/fonts/75dpi/ FontPath /usr/X11R6/lib/X11/fonts/100dpi/ # The module search path. The default path is shown here. #ModulePath /usr/X11R6/lib/modules EndSection # ** # Server flags section. # ** Section ServerFlags # Uncomment this to cause a core dump at the spot where a signal is # received. This may leave the console in an unusable state, but may # provide a better stack trace in the core dump to aid in debugging #Option NoTrapSignals # Uncomment this to disable the CrtlAltBS server abort sequence # This allows clients to receive this key event. #Option DontZap # Uncomment this to disable the CrtlAltKP_+/KP_- mode
Re: [gentoo-user] Getting direct rendering (DRI) to work with ATI 9550 video card
You need to enable the GLX extension en xorg.conf, ie: in the Module-section (Section Module), append Load glx before EndSection, and try again :) Oscar On Fri, 02 Sep 2005 10:34:56 -0500 John Lange [EMAIL PROTECTED] wrote: Xlib: extension GLX missing on display :0.0. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Getting direct rendering (DRI) to work with ATI 9550 video card
Sorry for not including it in the original posting but here is the section from xorg.conf which includes the load glx. Following that is the error message it generates in the log file. Then the listing of /usr/lib/modules/extensions/ which (sort of) contains a libglx.so. I think this may be where the problem is but I'm clueless as to why libglx wouldn't be working. - Section Module # This loads the DBE extension module. Loaddbe # Double buffer extension # This loads the miscellaneous extensions module, and disables # initialisation of the XFree86-DGA extension within that module. SubSection extmod Optionomit xfree86-dga # don't initialise the DGA extension EndSubSection # This loads the Type1 and FreeType font modules Loadtype1 Loadfreetype # This loads the GLX module Loadglx # libglx.a Loaddri # libdri.a EndSection - Which results in (Xorg.log): (II) LoadModule: glx (WW) Warning, couldn't open module glx (II) UnloadModule: glx (EE) Failed to load module glx (module does not exist, 0) ls -l /usr/lib/modules/extensions/ total 932 -r--r--r-- 1 root root 16580 Apr 10 17:38 libdbe.a -r--r--r-- 1 root root 32470 Apr 10 17:38 libdri.a -r--r--r-- 1 root root 167396 Apr 10 17:38 libextmod.a -rwxr-xr-x 1 root root 651460 Apr 10 18:20 libglx.so.1.0.7174 -r--r--r-- 1 root root 25688 Apr 10 17:38 librecord.a -r--r--r-- 1 root root 39306 Apr 10 17:38 libxtrap.a On Fri, 2005-09-02 at 20:50 +0200, Oscar wrote: You need to enable the GLX extension en xorg.conf, ie: in the Module-section (Section Module), append Load glx before EndSection, and try again :) Oscar On Fri, 02 Sep 2005 10:34:56 -0500 John Lange [EMAIL PROTECTED] wrote: Xlib: extension GLX missing on display :0.0. -- John Lange -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Getting direct rendering (DRI) to work with ATI 9550 video card
John Lange schreef: but I'm clueless as to why libglx wouldn't be working. (II) LoadModule: glx (WW) Warning, couldn't open module glx (II) UnloadModule: glx (EE) Failed to load module glx (module does not exist, 0) The module not existing would seem to be a good reason that it doesn't work :) . I'm wondering if the drivers built correctly in the first place. What version of the drivers, what kernel, is /usr/src/linux symlinked to the actual kernel that you're running, and could you re-emerge the ati-drivers package, watching *very* carefully for any messages that say that DRI could not be built? (If such a message appears, the emerge will complete 'normally', but the drivers won't work, as you might imagine.) Holly -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Getting direct rendering (DRI) to work with ATI 9550 video card
Thanks for the reply Holly. Symlinks are as follows: lrwxrwxrwx 1 root root 22 Apr 9 08:47 linux - linux-2.6.11-gentoo-r3 drwxr-xr-x 19 root root4096 Sep 2 08:54 linux-2.6.11-gentoo-r3 I've re-emerged the ati drivers several times but can't hurt to do it again... Following is the output. I previously had an nvidia card installed (and working great I might add). Could there be any left over flags in a portage config file someplace that might be screwing things up? I'm a Linux veteran but new to Gentoo/Portage so I'm still a bit lost as to where everything goes that effects compiling... Here is the emerge output for the ati-drivers: --- # emerge ati-drivers Calculating dependencies ...done! emerge (1 of 1) media-video/ati-drivers-8.12.10 to / md5 files ;-) ChangeLog md5 files ;-) metadata.xml md5 files ;-) ati-drivers-8.10.19.ebuild md5 files ;-) ati-drivers-8.8.25-r3.ebuild md5 files ;-) ati-drivers-8.12.10.ebuild md5 files ;-) files/09ati md5 files ;-) files/3.2.5-linux-2.6.0-test6-mm.patch md5 files ;-) files/8.08-kernel-2.6.10.patch md5 files ;-) files/8.8.25-via-amd64.patch md5 files ;-) files/8.8.25-smp.patch md5 files ;-) files/digest-ati-drivers-8.10.19 md5 files ;-) files/digest-ati-drivers-8.8.25-r3 md5 files ;-) files/fglrx-2.6-amd-adv-spec-fix.patch md5 files ;-) files/fglrx-2.6-fix-deprecated.patch md5 files ;-) files/fglrx-2.6-get-page.patch md5 files ;-) files/fglrx-2.6-iminor.patch md5 files ;-) files/fglrx-2.6-makefile.patch md5 files ;-) files/fglrx-2.6-pagetable.patch md5 files ;-) files/fglrx-2.6-vmalloc-vmaddr.patch md5 files ;-) files/fglrx-2.6.10-pci_get_class.patch md5 files ;-) files/digest-ati-drivers-8.12.10 md5 src_uri ;-) fglrx_6_8_0-8.12.10-1.i386.rpm * Determining the location of the kernel source code * Found kernel source directory: * /usr/src/linux * Found sources for kernel version: * 2.6.11-gentoo-r3 * Checking for MTRR support enabled... [ ok ] * Checking for AGP support enabled... [ ok ] * Checking for DRM support disabled... [ ok ] * X11 implementation is xorg-x11. Unpacking source... Unpacking fglrx_6_8_0-8.12.10-1.i386.rpm * Applying fglrx-2.6-pagetable.patch ... [ ok ] * Applying 8.8.25-via-amd64.patch ... [ ok ] * Applying 8.8.25-smp.patch ... [ ok ] Source unpacked. * Building the DRM module... make: Entering directory `/usr/src/linux-2.6.11-gentoo-r3' CC [M] /var/tmp/portage/ati-drivers-8.12.10/work/lib/modules/fglrx/build_mod/agp3.o CC [M] /var/tmp/portage/ati-drivers-8.12.10/work/lib/modules/fglrx/build_mod/nvidia-agp.o CC [M] /var/tmp/portage/ati-drivers-8.12.10/work/lib/modules/fglrx/build_mod/agpgart_be.o /var/tmp/portage/ati-drivers-8.12.10/work/lib/modules/fglrx/build_mod/agpgart_be.c: In function `agp_find_supported_device': /var/tmp/portage/ati-drivers-8.12.10/work/lib/modules/fglrx/build_mod/agpgart_be.c:6542: warning: unused variable `cap_ptr' /var/tmp/portage/ati-drivers-8.12.10/work/lib/modules/fglrx/build_mod/agpgart_be.c: In function `__fgl_agp_init': /var/tmp/portage/ati-drivers-8.12.10/work/lib/modules/fglrx/build_mod/agpgart_be.c:7627: warning: `pm_register' is deprecated (declared at include/linux/pm.h:106) /var/tmp/portage/ati-drivers-8.12.10/work/lib/modules/fglrx/build_mod/agpgart_be.c: In function `__fgl_agp_cleanup': /var/tmp/portage/ati-drivers-8.12.10/work/lib/modules/fglrx/build_mod/agpgart_be.c:7637: warning: `pm_unregister_all' is deprecated (declared at include/linux/pm.h:116) /var/tmp/portage/ati-drivers-8.12.10/work/lib/modules/fglrx/build_mod/agpgart_be.c: At top level: /var/tmp/portage/ati-drivers-8.12.10/work/lib/modules/fglrx/build_mod/agpgart_be.c:6523: warning: `agp_check_supported_device' definedbut not used CC [M] /var/tmp/portage/ati-drivers-8.12.10/work/lib/modules/fglrx/build_mod/i7505-agp.o CC [M] /var/tmp/portage/ati-drivers-8.12.10/work/lib/modules/fglrx/build_mod/firegl_public.o /var/tmp/portage/ati-drivers-8.12.10/work/lib/modules/fglrx/build_mod/firegl_public.c: In function `firegl_stub_putminor': /var/tmp/portage/ati-drivers-8.12.10/work/lib/modules/fglrx/build_mod/firegl_public.c:511: warning: `inter_module_put' is deprecated (declared at include/linux/module.h:578) /var/tmp/portage/ati-drivers-8.12.10/work/lib/modules/fglrx/build_mod/firegl_public.c:513: warning: `inter_module_unregister' is deprecated (declared at
Re: [gentoo-user] Getting direct rendering (DRI) to work with ATI 9550 video card
John Lange schreef: Thanks for the reply Holly. Symlinks are as follows: lrwxrwxrwx 1 root root 22 Apr 9 08:47 linux - linux-2.6.11-gentoo-r3 drwxr-xr-x 19 root root4096 Sep 2 08:54 linux-2.6.11-gentoo-r3 I've re-emerged the ati drivers several times but can't hurt to do it again... Following is the output. snipped, it looks fine-- or as fine as it ever looks But I just had a horrible, horrible thought-- did you ever do opengl-update ati? Holly -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Getting direct rendering (DRI) to work with ATI 9550 video card
Yup. Done it each time I emerged the ati drivers. Here it is again just for the heck of it. # opengl-update ati * Switching to ati OpenGL interface... Regenerating /etc/ld.so.cache... * Caching service dependencies...[ ok ] I wish it was that easy :\ Note the dates in: /usr/lib/modules/extensions/ -r--r--r-- 1 root root 16580 Apr 10 17:38 libdbe.a -r--r--r-- 1 root root 32470 Apr 10 17:38 libdri.a -r--r--r-- 1 root root 167396 Apr 10 17:38 libextmod.a -rwxr-xr-x 1 root root 651460 Apr 10 18:20 libglx.so.1.0.7174 -r--r--r-- 1 root root 25688 Apr 10 17:38 librecord.a -r--r--r-- 1 root root 39306 Apr 10 17:38 libxtrap.a nothing new in a while Does Xorg need to be re-emerged to get this working? And does that file name libglx.so.1.0.7174 seem right? -- John Lange On Fri, 2005-09-02 at 23:20 +0200, Holly Bostick wrote: John Lange schreef: Thanks for the reply Holly. Symlinks are as follows: lrwxrwxrwx 1 root root 22 Apr 9 08:47 linux - linux-2.6.11-gentoo-r3 drwxr-xr-x 19 root root4096 Sep 2 08:54 linux-2.6.11-gentoo-r3 I've re-emerged the ati drivers several times but can't hurt to do it again... Following is the output. snipped, it looks fine-- or as fine as it ever looks But I just had a horrible, horrible thought-- did you ever do opengl-update ati? Holly -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Getting direct rendering (DRI) to work with ATI 9550 video card
Holly Bostick: John Lange schreef: And does that file name libglx.so.1.0.7174 seem right? Now that you mention it, no. Isn't that an nVidia file (I'm not sure, having never had an nVidia card, but that number looks like an nVidia driver revision number to me). Here's mine: [cut] Here's mine: [root ~]# l /usr/lib/modules/extensions/ total 3332 -r--r--r-- 1 root root 2451366 Aug 6 20:39 libGLcore.a -r--r--r-- 1 root root 16640 Aug 6 20:39 libdbe.a -r--r--r-- 1 root root 32530 Aug 6 20:39 libdri.a -r--r--r-- 1 root root 167796 Aug 6 20:39 libextmod.a lrwxrwxrwx 1 root root 43 Aug 21 17:14 libglx.so - /usr/lib/opengl/nvidia/extensions/libglx.so* -rwxr-xr-x 1 root root 651460 May 23 22:31 libglx.so.1.0.7174* -r--r--r-- 1 root root 25748 Aug 6 20:39 librecord.a -r--r--r-- 1 root root 39406 Aug 6 20:39 libxtrap.a [root ~]# [root ~]# l /usr/lib/opengl/nvidia/extensions/ total 644 -rwxr-xr-x 1 root root 651460 Aug 21 17:13 libglx.so* [root ~]# nvidia card: RIVA TNT2 nvidia-kernel-1.0.7174 nvidia-glx-1.0.7174-r4 HTH Sergio -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Getting direct rendering (DRI) to work with ATI 9550 video card
John Lange: Note the dates in: /usr/lib/modules/extensions/ -r--r--r-- 1 root root 16580 Apr 10 17:38 libdbe.a -r--r--r-- 1 root root 32470 Apr 10 17:38 libdri.a -r--r--r-- 1 root root 167396 Apr 10 17:38 libextmod.a -rwxr-xr-x 1 root root 651460 Apr 10 18:20 libglx.so.1.0.7174 -r--r--r-- 1 root root 25688 Apr 10 17:38 librecord.a -r--r--r-- 1 root root 39306 Apr 10 17:38 libxtrap.a nothing new in a while Does Xorg need to be re-emerged to get this working? I think so. My dates (as you can see in my previuos message) are Aug 6. Looking for Aug 06 in /var/log/emerge.log, I've found: - nvidia-kernel: not emerged on Aug 6 - nvidia-glx: not emerged on Aug 6 - opengl-update: not emerged on Aug 6 - xorg-x11-6.8.2-r2: emerged on Aug 6 HTH Sergio -- gentoo-user@gentoo.org mailing list
