Re: [gentoo-user] Tuning QAM w/ pcHDTV3000
On 5/23/05, Michael Haan <[EMAIL PROTECTED]> wrote: > On 5/23/05, Alex Stagg <[EMAIL PROTECTED]> wrote: > > QAM and 8VSB are two different modulation schemes. 8VSB is used for digital > > off the air (ATSC) signals in the US. QAM is used on Cable systems. That's > > all about this topic but maybe it will help you sort out what you want to > > do. > > > > -Original Message- > > From: Michael Haan [mailto:[EMAIL PROTECTED] > > Sent: Monday, May 23, 2005 8:10 PM > > To: Discussion about mythtv; gentoo-user@lists.gentoo.org > > Subject: [gentoo-user] Tuning QAM w/ pcHDTV3000 > > > > I'm not sure I'm doing this right. I have the card installed, running > > 2.6.12-rc4. The drivers seem to load as does the firmware. I've built > > dvb-apps and tried: > > > > ./atscscan atsc/us-NTSC-center-frequencies-8VSB > > > > > > And got nothing but: > > > > >>> tune to: 80300:8VSB > > WARNING: >>> tuning failed!!! > > >>> tune to: 80300:8VSB (tuning failed) > > WARNING: >>> tuning failed!!! > > > > > > Does that mean there are no QAM channels I can get? Or do I need to do > > something more? What about 64 vs 256? > > > > -- > > gentoo-user@gentoo.org mailing list > > > > -- > > gentoo-user@gentoo.org mailing list > > > > > > Ok, I've found a file with proper frequencies and am finally getting a > signal lock: > > [EMAIL PROTECTED] root # ./dvb-apps/util/szap/azap -r C104 > using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' > tuning to 67500 Hz > video pid 0x, audio pid 0x > status 1f | signal 126d | snr fd47 | ber | unc | FE_HAS_LOCK > status 1f | signal 126d | snr fd43 | ber | unc | FE_HAS_LOCK > status 1f | signal 126d | snr fd5b | ber | unc | FE_HAS_LOCK > > > A post I read (http://www.pchdtv.com/forum/viewtopic.php?t=688&highlight=qam) > mentioned needing to run dvbtraffic to get the "pids". I get this: > > > tibeaux root # ./dvb-apps/util/dvbtraffic/dvbtraffic > /dev/dvb/adpater0/frontend0 > read: Bad file descriptor > > > My question is - do I need to do this? If I'm getting a lock, what do > I do next to enable myth to use this card? > So, no one can tell me how to take a seemingly working card and get myth to use it? -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Tuning QAM w/ pcHDTV3000
On 5/23/05, Alex Stagg <[EMAIL PROTECTED]> wrote: > QAM and 8VSB are two different modulation schemes. 8VSB is used for digital > off the air (ATSC) signals in the US. QAM is used on Cable systems. That's > all about this topic but maybe it will help you sort out what you want to > do. > > -Original Message- > From: Michael Haan [mailto:[EMAIL PROTECTED] > Sent: Monday, May 23, 2005 8:10 PM > To: Discussion about mythtv; gentoo-user@lists.gentoo.org > Subject: [gentoo-user] Tuning QAM w/ pcHDTV3000 > > I'm not sure I'm doing this right. I have the card installed, running > 2.6.12-rc4. The drivers seem to load as does the firmware. I've built > dvb-apps and tried: > > ./atscscan atsc/us-NTSC-center-frequencies-8VSB > > > And got nothing but: > > >>> tune to: 80300:8VSB > WARNING: >>> tuning failed!!! > >>> tune to: 80300:8VSB (tuning failed) > WARNING: >>> tuning failed!!! > > > Does that mean there are no QAM channels I can get? Or do I need to do > something more? What about 64 vs 256? > > -- > gentoo-user@gentoo.org mailing list > > -- > gentoo-user@gentoo.org mailing list > > Ok, I've found a file with proper frequencies and am finally getting a signal lock: [EMAIL PROTECTED] root # ./dvb-apps/util/szap/azap -r C104 using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' tuning to 67500 Hz video pid 0x, audio pid 0x status 1f | signal 126d | snr fd47 | ber | unc | FE_HAS_LOCK status 1f | signal 126d | snr fd43 | ber | unc | FE_HAS_LOCK status 1f | signal 126d | snr fd5b | ber | unc | FE_HAS_LOCK A post I read (http://www.pchdtv.com/forum/viewtopic.php?t=688&highlight=qam) mentioned needing to run dvbtraffic to get the "pids". I get this: tibeaux root # ./dvb-apps/util/dvbtraffic/dvbtraffic /dev/dvb/adpater0/frontend0 read: Bad file descriptor My question is - do I need to do this? If I'm getting a lock, what do I do next to enable myth to use this card? -- gentoo-user@gentoo.org mailing list
RE: [gentoo-user] Tuning QAM w/ pcHDTV3000
QAM and 8VSB are two different modulation schemes. 8VSB is used for digital off the air (ATSC) signals in the US. QAM is used on Cable systems. That's all about this topic but maybe it will help you sort out what you want to do. -Original Message- From: Michael Haan [mailto:[EMAIL PROTECTED] Sent: Monday, May 23, 2005 8:10 PM To: Discussion about mythtv; gentoo-user@lists.gentoo.org Subject: [gentoo-user] Tuning QAM w/ pcHDTV3000 I'm not sure I'm doing this right. I have the card installed, running 2.6.12-rc4. The drivers seem to load as does the firmware. I've built dvb-apps and tried: ./atscscan atsc/us-NTSC-center-frequencies-8VSB And got nothing but: >>> tune to: 80300:8VSB WARNING: >>> tuning failed!!! >>> tune to: 80300:8VSB (tuning failed) WARNING: >>> tuning failed!!! Does that mean there are no QAM channels I can get? Or do I need to do something more? What about 64 vs 256? -- gentoo-user@gentoo.org mailing list -- gentoo-user@gentoo.org mailing list
[gentoo-user] Tuning QAM w/ pcHDTV3000
I'm not sure I'm doing this right. I have the card installed, running 2.6.12-rc4. The drivers seem to load as does the firmware. I've built dvb-apps and tried: ./atscscan atsc/us-NTSC-center-frequencies-8VSB And got nothing but: >>> tune to: 80300:8VSB WARNING: >>> tuning failed!!! >>> tune to: 80300:8VSB (tuning failed) WARNING: >>> tuning failed!!! Does that mean there are no QAM channels I can get? Or do I need to do something more? What about 64 vs 256? -- gentoo-user@gentoo.org mailing list