Re: [gentoo-user] installing Gentoo in a xen VM
On Sun, Jan 11, 2015 at 8:14 AM, lee l...@yagibdah.de wrote: Rich Freeman ri...@gentoo.org writes: Doing backups with dd isn't terribly practical, but it is completely safe if done correctly. The LV would need to be the same size or larger, or else your filesystem will be truncated. Yes, my impression is that it isn't very practical or a good method, and I find it strange that LVM is still lacking some major features. Generally you do backup at the filesystem layer, not at the volume management layer. LVM just manages a big array of disk blocks. It has no concept of files. Just create a small boot partition and give the rest to zfs. A partition is a block device, just like a disk. ZFS doesn't care if it is managing the entire disk or just a partition. ZFS does care: You cannot export ZFS pools residing on partitions, and apparently ZFS cannot use the disk cache as efficiently when it uses partitions. Cite? This seems unlikely. Caching in memory is also less efficient because another file system has its own cache. There is no other filesystem. ZFS is running on bare metal. It is just pointing to a partition on a drive (an array of blocks) instead of the whole drive (an array of blocks). The kernel does not cache partitions differently from drives. On top of that, you have the overhead of software raid for that small partition unless you can dedicate hardware-raided disks for /boot. Just how often are you reading/writing from your boot partition? You only read from it at boot time, and you only write to it when you update your kernel/etc. There is no requirement for it to be raided in any case, though if you have multiple disks that wouldn't hurt. This sort of thing was very common before grub2 started supporting more filesystems. That doesn't mean it's a good setup. I'm finding it totally undesirable. Having a separate /boot partition has always been a crutch. Better not buy an EFI motherboard. :) With ZFS at hand, btrfs seems pretty obsolete. You do realize that btrfs was created when ZFS was already at hand, right? I don't think that ZFS will be likely to make btrfs obsolete unless it adopts more dynamic desktop-oriented features (like being able to modify a vdev), and is relicensed to something GPL-compatible. Unless those happen, it is unlikely that btrfs is going to go away, unless it is replaced by something different. Let's say it seems /currently/ obsolete. You seem to have an interesting definition of obsolete - something which holds potential promise for the future is better described as experimental. Solutions are needed /now/, not in about 10 years when btrfs might be ready. Well, feel free to create one. Nobody is stopping anybody from using zfs, but unless it is either relicensed by Oracle or the kernel/grub/etc is relicensed by everybody else you're unlikely to see it become a mainstream solution. That seems to be the biggest barrier to adoption, though it would be nice for small installations if vdevs were more dynamic. By all means use it if that is your preference. A license may seem like a small thing, but entire desktop environments have been built as a result of them. When a mainstream linux distro can't put ZFS support on their installation CD due to licensing compatibility it makes it pretty impractical to use it for your default filesystem. I'd love to see the bugs worked out of btrfs faster, but for what I've paid for it so far I'd say I'm getting good value for my $0. It is FOSS - it gets done when those contributing to it (whether paid or not) are done. The ones who are paying for it get to decide for themselves if it meets their needs, which could be quite different from yours. I'd actually be interested in a comparison of the underlying btrfs vs zfs designs. I'm not talking about implementation (bugs/etc), but the fundamental designs. What features are possible to add to one which are impossible to add to the other, what performance limitations will the one always suffer in comparison to the other, etc? All the comparisons I've seen just compare the implementations, which is useful if you're trying to decide what to install /right now/ but less so if you're trying to understand the likely future of either. -- Rich
Re: [gentoo-user] installing Gentoo in a xen VM
Rich Freeman ri...@gentoo.org writes: On Sat, Jan 10, 2015 at 1:22 PM, lee l...@yagibdah.de wrote: Rich Freeman ri...@gentoo.org writes: You can dd from a logical volume into a file, and from a file into a logical volume. You won't destroy the volume group unless you do something dumb like trying to copy it directly onto a physical volume. Logical volumes are just block devices as far as the kernel is concerned. You mean I need to create a LV (of the same size) and then use dd to write the backup into it? That doesn't seem like a safe method. Doing backups with dd isn't terribly practical, but it is completely safe if done correctly. The LV would need to be the same size or larger, or else your filesystem will be truncated. Yes, my impression is that it isn't very practical or a good method, and I find it strange that LVM is still lacking some major features. How about ZFS as root file system? I'd rather create a pool over all the disks and create file systems within the pool than use something like ext4 to get the system to boot. I doubt zfs is supported by grub and such, so you'd have to do the usual in-betweens as you're eluding to. However, I suspect it would generally work. I haven't really used zfs personally other than tinkering around a bit in a VM. That would be a very big disadvantage. When you use zfs, it doesn't really make sense to have extra partitions or drives; you just want to create a pool from all drives and use that. Even if you accept a boot partition, that partition must be on a raid volume, so you either have to dedicate at least two disks to it, or you're employing software raid for a very small partition and cannot use the whole device for ZFS as recommended. That just sucks. Just create a small boot partition and give the rest to zfs. A partition is a block device, just like a disk. ZFS doesn't care if it is managing the entire disk or just a partition. ZFS does care: You cannot export ZFS pools residing on partitions, and apparently ZFS cannot use the disk cache as efficiently when it uses partitions. Caching in memory is also less efficient because another file system has its own cache. On top of that, you have the overhead of software raid for that small partition unless you can dedicate hardware-raided disks for /boot. This sort of thing was very common before grub2 started supporting more filesystems. That doesn't mean it's a good setup. I'm finding it totally undesirable. Having a separate /boot partition has always been a crutch. Well, I don't want to use btrfs (yet). The raid capabilities of brtfs are probably one of its most unstable features. They are derived from mdraid: Can they compete with ZFS both in performance and, more important, reliability? Btrfs raid1 is about as stable as btrfs without raid. I can't say whether any code from mdraid was borrowed but btrfs raid works completely differently and has about as much in common with mdraid as zfs does. Hm, I might have misunderstood an article I've read. I can't speak for zfs performance, but btrfs performance isn't all that great right now - I don't think there is any theoretical reason why it couldn't be as good as zfs one day, but it isn't today. Give it another 10 years, and btrfs might be the default choice. Btrfs is certainly far less reliable than zfs on solaris - zfs on linux has less long-term history of any kind but most seem to think it works reasonably well. It seems that ZFS does work (I can't say anything about its reliability yet), and it provides a solution unlike any other FS. Btrfs doesn't fully work yet, see [1]. [1]: https://btrfs.wiki.kernel.org/index.php/RAID56 With ZFS at hand, btrfs seems pretty obsolete. You do realize that btrfs was created when ZFS was already at hand, right? I don't think that ZFS will be likely to make btrfs obsolete unless it adopts more dynamic desktop-oriented features (like being able to modify a vdev), and is relicensed to something GPL-compatible. Unless those happen, it is unlikely that btrfs is going to go away, unless it is replaced by something different. Let's say it seems /currently/ obsolete. It's not fully working yet, reliability is very questionable, and it's not as easy to handle as ZFS. By the time btrfs has matured to the point where it isn't obsolete anymore, chances are that there will be something else which replaces it. Solutions are needed /now/, not in about 10 years when btrfs might be ready. -- Again we must be afraid of speaking of daemons for fear that daemons might swallow us. Finally, this fear has become reasonable.
Re: [gentoo-user] installing Gentoo in a xen VM
On Sun, Jan 11, 2015 at 1:42 PM, lee l...@yagibdah.de wrote: Rich Freeman ri...@gentoo.org writes: Generally you do backup at the filesystem layer, not at the volume management layer. LVM just manages a big array of disk blocks. It has no concept of files. That may require downtime while the idea of taking snapshots and then backing up the volume is to avoid the downtime. Sure, which is why btrfs and zfs support snapshots at the filesystem layer. You can do an lvm snapshot but it requires downtime unless you want to mount an unclean snapshot for backups. Just create a small boot partition and give the rest to zfs. A partition is a block device, just like a disk. ZFS doesn't care if it is managing the entire disk or just a partition. ZFS does care: You cannot export ZFS pools residing on partitions, and apparently ZFS cannot use the disk cache as efficiently when it uses partitions. Cite? This seems unlikely. , [ man zpool ] |For pools to be portable, you must give the zpool command |whole disks, not just partitions, so that ZFS can label the |disks with portable EFI labels. Otherwise, disk drivers on |platforms of different endianness will not recognize the |disks. ` You may be able to export them, and then you don't really know what happens when you try to import them. I didn't keep a bookmark for the article that mentioned the disk cache. When you read about ZFS, you'll find that using the whole disk is recommended while using partitions is not. Ok, I get the EFI label issue if zfs works with multiple endianness and only stores the setting in the EFI label (which seems like an odd way to do things). You didn't mention anything about disk cache and it seems unlikely that using partitions vs whole drives is going to matter here. Honestly, I feel like there is a lot of cargo cult mentality with many in the ZFS community. Another one of those must do things is using ECC RAM. Sure, you're more likely to end up with data corruptions without it than with it, but the same is true with ANY filesystem. I've yet to hear any reasonable argument as to why ZFS is more susceptible to memory corruption than ext4. Caching in memory is also less efficient because another file system has its own cache. There is no other filesystem. ZFS is running on bare metal. It is just pointing to a partition on a drive (an array of blocks) instead of the whole drive (an array of blocks). The kernel does not cache partitions differently from drives. How do you use a /boot partition that doesn't have a file system? Oh, I thought you meant that the memory cache of zfs itself is less efficient. I'd be interested in a clear explanation as to why 10X100GB filesystems use cache differently than 1X1TB filesystem if file access is otherwise the same. However, even if having a 1GB boot partition mounted caused wasted cache space that problem is easily solved by just not mounting it except when doing kernel updates. On top of that, you have the overhead of software raid for that small partition unless you can dedicate hardware-raided disks for /boot. Just how often are you reading/writing from your boot partition? You only read from it at boot time, and you only write to it when you update your kernel/etc. There is no requirement for it to be raided in any case, though if you have multiple disks that wouldn't hurt. If you want to accept that the system goes down or has to be brought down or is unable to boot because the disk you have your /boot partition on has failed, you may be able to get away with a non-raided /boot partition. When you do that, what's the advantage other than saving the software raid? You still need to either dedicate a disk to it, or you have to leave a part of all the other disks unused and cannot use them as a whole for ZFS because otherwise they will be of different sizes. Sure, when I have multiple disks available and need a boot partition I RAID it with software RAID. So what? Updating your kernel /might/ be a bit slower when you do that twice a month or whatever. Better not buy an EFI motherboard. :) Yes, they are a security hazard and a PITA. Maybe I can sit it out until they come up with something better. Security hazard? How is being able to tell your motherboard to only boot software of your own choosing a security hazard? Or are you referring to something other than UEFI? I think the pain is really only there because most of the utilities/etc haven't been updated to the new reality. In any case, I don't see it going away anytime soon. With ZFS at hand, btrfs seems pretty obsolete. You do realize that btrfs was created when ZFS was already at hand, right? I don't think that ZFS will be likely to make btrfs obsolete unless it adopts more dynamic desktop-oriented features (like being able to modify a vdev), and is
Re: [gentoo-user] installing Gentoo in a xen VM
Rich Freeman ri...@gentoo.org writes: On Sun, Jan 11, 2015 at 8:14 AM, lee l...@yagibdah.de wrote: Rich Freeman ri...@gentoo.org writes: Doing backups with dd isn't terribly practical, but it is completely safe if done correctly. The LV would need to be the same size or larger, or else your filesystem will be truncated. Yes, my impression is that it isn't very practical or a good method, and I find it strange that LVM is still lacking some major features. Generally you do backup at the filesystem layer, not at the volume management layer. LVM just manages a big array of disk blocks. It has no concept of files. That may require downtime while the idea of taking snapshots and then backing up the volume is to avoid the downtime. Just create a small boot partition and give the rest to zfs. A partition is a block device, just like a disk. ZFS doesn't care if it is managing the entire disk or just a partition. ZFS does care: You cannot export ZFS pools residing on partitions, and apparently ZFS cannot use the disk cache as efficiently when it uses partitions. Cite? This seems unlikely. , [ man zpool ] |For pools to be portable, you must give the zpool command |whole disks, not just partitions, so that ZFS can label the |disks with portable EFI labels. Otherwise, disk drivers on |platforms of different endianness will not recognize the |disks. ` You may be able to export them, and then you don't really know what happens when you try to import them. I didn't keep a bookmark for the article that mentioned the disk cache. When you read about ZFS, you'll find that using the whole disk is recommended while using partitions is not. Caching in memory is also less efficient because another file system has its own cache. There is no other filesystem. ZFS is running on bare metal. It is just pointing to a partition on a drive (an array of blocks) instead of the whole drive (an array of blocks). The kernel does not cache partitions differently from drives. How do you use a /boot partition that doesn't have a file system? On top of that, you have the overhead of software raid for that small partition unless you can dedicate hardware-raided disks for /boot. Just how often are you reading/writing from your boot partition? You only read from it at boot time, and you only write to it when you update your kernel/etc. There is no requirement for it to be raided in any case, though if you have multiple disks that wouldn't hurt. If you want to accept that the system goes down or has to be brought down or is unable to boot because the disk you have your /boot partition on has failed, you may be able to get away with a non-raided /boot partition. When you do that, what's the advantage other than saving the software raid? You still need to either dedicate a disk to it, or you have to leave a part of all the other disks unused and cannot use them as a whole for ZFS because otherwise they will be of different sizes. This sort of thing was very common before grub2 started supporting more filesystems. That doesn't mean it's a good setup. I'm finding it totally undesirable. Having a separate /boot partition has always been a crutch. Better not buy an EFI motherboard. :) Yes, they are a security hazard and a PITA. Maybe I can sit it out until they come up with something better. With ZFS at hand, btrfs seems pretty obsolete. You do realize that btrfs was created when ZFS was already at hand, right? I don't think that ZFS will be likely to make btrfs obsolete unless it adopts more dynamic desktop-oriented features (like being able to modify a vdev), and is relicensed to something GPL-compatible. Unless those happen, it is unlikely that btrfs is going to go away, unless it is replaced by something different. Let's say it seems /currently/ obsolete. You seem to have an interesting definition of obsolete - something which holds potential promise for the future is better described as experimental. Can you build systems on potential promises for the future? If the resources it takes to develop btrfs would be put towards improving ZFS, or the other way round, wouldn't that be more efficient? We might even have a better solution available now. Of course, it's not a good idea to remove variety, so it's a dilemma. But are the features provided or intended to be provided and the problems both btrfs and ZFS are trying to solve so much different that that each of them needs to re-invent the wheel? Solutions are needed /now/, not in about 10 years when btrfs might be ready. Well, feel free to create one. Nobody is stopping anybody from using zfs, but unless it is either relicensed by Oracle or the kernel/grub/etc is relicensed by everybody else you're unlikely to see it become a mainstream solution. That seems to be the biggest barrier to adoption, though it would
Re: [gentoo-user] installing Gentoo in a xen VM
Rich Freeman ri...@gentoo.org writes: On Fri, Jan 9, 2015 at 4:02 PM, lee l...@yagibdah.de wrote: Rich Freeman ri...@gentoo.org writes: On Mon, Dec 29, 2014 at 8:55 AM, lee l...@yagibdah.de wrote: Just why can't you? ZFS apparently can do such things --- yet what's the difference in performance of ZFS compared to hardware raid? Software raid with MD makes for quite a slowdown. Well, there is certainly no reason that you couldn't serialize a logical volume as far as design goes. It just isn't implemented (as far as I'm aware), though you certainly can just dd the contents of a logical volume. You can use dd to make a copy. Then what do you do with this copy? I suppose you can't just use dd to write the copy into another volume group and have it show up as desired. You might destroy the volume group instead ... You can dd from a logical volume into a file, and from a file into a logical volume. You won't destroy the volume group unless you do something dumb like trying to copy it directly onto a physical volume. Logical volumes are just block devices as far as the kernel is concerned. You mean I need to create a LV (of the same size) and then use dd to write the backup into it? That doesn't seem like a safe method. How about ZFS as root file system? I'd rather create a pool over all the disks and create file systems within the pool than use something like ext4 to get the system to boot. I doubt zfs is supported by grub and such, so you'd have to do the usual in-betweens as you're eluding to. However, I suspect it would generally work. I haven't really used zfs personally other than tinkering around a bit in a VM. That would be a very big disadvantage. When you use zfs, it doesn't really make sense to have extra partitions or drives; you just want to create a pool from all drives and use that. Even if you accept a boot partition, that partition must be on a raid volume, so you either have to dedicate at least two disks to it, or you're employing software raid for a very small partition and cannot use the whole device for ZFS as recommended. That just sucks. And how do I convert a system installed on an ext4 FS (on a hardware raid-1) to ZFS? I can plug in another two disks, create a ZFS pool from them, make file systems (like for /tmp, /var, /usr ...) and copy everything over. But how do I make it bootable? I'm pretty sure you'd need an initramfs and a boot partition that is readable by the bootloader. You can skip that with btrfs, but not with zfs. GRUB is FSF so I doubt they'll be doing anything about zfs anytime soon. Otherwise, you'll have to copy everything over - btrfs can do in-place ext4 conversion, but not zfs. Well, I don't want to use btrfs (yet). The raid capabilities of brtfs are probably one of its most unstable features. They are derived from mdraid: Can they compete with ZFS both in performance and, more important, reliability? With ZFS at hand, btrfs seems pretty obsolete. -- Again we must be afraid of speaking of daemons for fear that daemons might swallow us. Finally, this fear has become reasonable.
Re: [gentoo-user] installing Gentoo in a xen VM
On Sat, Jan 10, 2015 at 1:22 PM, lee l...@yagibdah.de wrote: Rich Freeman ri...@gentoo.org writes: You can dd from a logical volume into a file, and from a file into a logical volume. You won't destroy the volume group unless you do something dumb like trying to copy it directly onto a physical volume. Logical volumes are just block devices as far as the kernel is concerned. You mean I need to create a LV (of the same size) and then use dd to write the backup into it? That doesn't seem like a safe method. Doing backups with dd isn't terribly practical, but it is completely safe if done correctly. The LV would need to be the same size or larger, or else your filesystem will be truncated. How about ZFS as root file system? I'd rather create a pool over all the disks and create file systems within the pool than use something like ext4 to get the system to boot. I doubt zfs is supported by grub and such, so you'd have to do the usual in-betweens as you're eluding to. However, I suspect it would generally work. I haven't really used zfs personally other than tinkering around a bit in a VM. That would be a very big disadvantage. When you use zfs, it doesn't really make sense to have extra partitions or drives; you just want to create a pool from all drives and use that. Even if you accept a boot partition, that partition must be on a raid volume, so you either have to dedicate at least two disks to it, or you're employing software raid for a very small partition and cannot use the whole device for ZFS as recommended. That just sucks. Just create a small boot partition and give the rest to zfs. A partition is a block device, just like a disk. ZFS doesn't care if it is managing the entire disk or just a partition. This sort of thing was very common before grub2 started supporting more filesystems. Well, I don't want to use btrfs (yet). The raid capabilities of brtfs are probably one of its most unstable features. They are derived from mdraid: Can they compete with ZFS both in performance and, more important, reliability? Btrfs raid1 is about as stable as btrfs without raid. I can't say whether any code from mdraid was borrowed but btrfs raid works completely differently and has about as much in common with mdraid as zfs does. I can't speak for zfs performance, but btrfs performance isn't all that great right now - I don't think there is any theoretical reason why it couldn't be as good as zfs one day, but it isn't today. Btrfs is certainly far less reliable than zfs on solaris - zfs on linux has less long-term history of any kind but most seem to think it works reasonably well. With ZFS at hand, btrfs seems pretty obsolete. You do realize that btrfs was created when ZFS was already at hand, right? I don't think that ZFS will be likely to make btrfs obsolete unless it adopts more dynamic desktop-oriented features (like being able to modify a vdev), and is relicensed to something GPL-compatible. Unless those happen, it is unlikely that btrfs is going to go away, unless it is replaced by something different. -- Rich
Re: [gentoo-user] installing Gentoo in a xen VM
On Fri, Jan 9, 2015 at 4:02 PM, lee l...@yagibdah.de wrote: Rich Freeman ri...@gentoo.org writes: On Mon, Dec 29, 2014 at 8:55 AM, lee l...@yagibdah.de wrote: Just why can't you? ZFS apparently can do such things --- yet what's the difference in performance of ZFS compared to hardware raid? Software raid with MD makes for quite a slowdown. Well, there is certainly no reason that you couldn't serialize a logical volume as far as design goes. It just isn't implemented (as far as I'm aware), though you certainly can just dd the contents of a logical volume. You can use dd to make a copy. Then what do you do with this copy? I suppose you can't just use dd to write the copy into another volume group and have it show up as desired. You might destroy the volume group instead ... You can dd from a logical volume into a file, and from a file into a logical volume. You won't destroy the volume group unless you do something dumb like trying to copy it directly onto a physical volume. Logical volumes are just block devices as far as the kernel is concerned. ZFS performs far better in such situations because you're usually just snapshotting and not copying data at all (though ZFS DOES support serialization which of course requires copying data, though it can be done very efficiently if you're snapshotting since the filesystem can detect changes without having to read everything). How's the performance of software raid vs. hardware raid vs. ZFS raid (which is also software raid)? Well, depends on your hardware. mdadm does pretty well though I'm sure a very good quality hardware RAID will outperform it. I would think that ZFS would outperform both for some workloads, and underperform it for others - it works very differently. ZFS doesn't have the write hole and all that, but I would think that large (many stripes) internal writes to files would work worse since ZFS has to juggle metadata and other filesystems will overwrite it in place. Incidentally, other than lacking maturity btrfs has the same capabilities. IIRC, there are things that btrfs can't do and ZFS can, like sending a FS over the network. There are things that each filesystem can do that the other cannot. That doesn't include sending a filesystem over the network. btrfs send can serialize snapshots or the differences between two snapshots. How about ZFS as root file system? I'd rather create a pool over all the disks and create file systems within the pool than use something like ext4 to get the system to boot. I doubt zfs is supported by grub and such, so you'd have to do the usual in-betweens as you're eluding to. However, I suspect it would generally work. I haven't really used zfs personally other than tinkering around a bit in a VM. And how do I convert a system installed on an ext4 FS (on a hardware raid-1) to ZFS? I can plug in another two disks, create a ZFS pool from them, make file systems (like for /tmp, /var, /usr ...) and copy everything over. But how do I make it bootable? I'm pretty sure you'd need an initramfs and a boot partition that is readable by the bootloader. You can skip that with btrfs, but not with zfs. GRUB is FSF so I doubt they'll be doing anything about zfs anytime soon. Otherwise, you'll have to copy everything over - btrfs can do in-place ext4 conversion, but not zfs. -- Rich
Re: [gentoo-user] installing Gentoo in a xen VM
thegeezer thegee...@thegeezer.net writes: Guess what, I still haven't found out how to actually back up and restore a VM residing in an LVM volume. I find it annoying that LVM doesn't have any way of actually copying a LV. It could be so easy if you could just do something like 'lvcopy lv_source other_host:/backups/lv_source_backup' and 'lvrestore other_host:/backups/lv_source_backup vg_target/lv_source' --- or store the copy of the LV in a local file somewhere. agreed. you have two choices, you can either use dd and clone the LV like a normal partition. alternatively you can use split mirrors and i do this to clone up physical devices: 1. make a mirror of the lv you want to copy to /dev/usb1 2. # lvconvert --splitmirrors 2 --name copy vg/lv /dev/usb1 in 2 it says split the mirror into two parts give the new version the name 'copy' leave this on the pv /dev/usb1 you then need to remove it if you want from your voume group And then you have a copy? Just why can't you? ZFS apparently can do such things --- yet what's the difference in performance of ZFS compared to hardware raid? Software raid with MD makes for quite a slowdown. sorry but that's just not true, if you choose the correct raid level and stripe it can easily compete, No, it can not. You can use the same raid level and stripe size with the same disks, once with software raid (md), once with hardware raid. When there's disk activity going on, you will notice an annoying sluggishness with the software raid which hardware raid just doesn't have. and be more portable (you don't have to find the identical raid card if the raid card goes bang); That depends on what cards you use. HP smart arrays are supposed to be compatible throughout different models. many raid card i would argue are even underpowered for their required iops When you require more iops than your hardware delivers, you need to upgrade the hardware. Do you have some number to show that md raid performs better, without the sluggishness, than a decent hardware raid controller with otherwise identical hardware? -- Again we must be afraid of speaking of daemons for fear that daemons might swallow us. Finally, this fear has become reasonable.
Re: [gentoo-user] installing Gentoo in a xen VM
Rich Freeman ri...@gentoo.org writes: On Mon, Dec 29, 2014 at 8:55 AM, lee l...@yagibdah.de wrote: Just why can't you? ZFS apparently can do such things --- yet what's the difference in performance of ZFS compared to hardware raid? Software raid with MD makes for quite a slowdown. Well, there is certainly no reason that you couldn't serialize a logical volume as far as design goes. It just isn't implemented (as far as I'm aware), though you certainly can just dd the contents of a logical volume. You can use dd to make a copy. Then what do you do with this copy? I suppose you can't just use dd to write the copy into another volume group and have it show up as desired. You might destroy the volume group instead ... ZFS performs far better in such situations because you're usually just snapshotting and not copying data at all (though ZFS DOES support serialization which of course requires copying data, though it can be done very efficiently if you're snapshotting since the filesystem can detect changes without having to read everything). How's the performance of software raid vs. hardware raid vs. ZFS raid (which is also software raid)? Incidentally, other than lacking maturity btrfs has the same capabilities. IIRC, there are things that btrfs can't do and ZFS can, like sending a FS over the network. The reason ZFS (and btrfs) are able to perform better is that they dictate the filesystem, volume management, and RAID layers. md has to support arbitrary data being stored on top of it - it is just a big block device which is just a gigantic array. ZFS actually knows what is in all those blocks, and it doesn't need to copy data that it knows hasn't changed, protect blocks when it knows they don't contain data, and so on. You could probably improve on mdadm by implementing additional TRIM-like capabilities for it so that filesystems could inform it better about the state of blocks, which of course would have to be supported by the filesystem. However, I doubt it will ever work as well as something like ZFS where all this stuff is baked into every level of the design. Well, I'm planning to make some tests with ZFS. Particularly, I want to see how it performs when NFS clients write to an exported ZFS file system. How about ZFS as root file system? I'd rather create a pool over all the disks and create file systems within the pool than use something like ext4 to get the system to boot. And how do I convert a system installed on an ext4 FS (on a hardware raid-1) to ZFS? I can plug in another two disks, create a ZFS pool from them, make file systems (like for /tmp, /var, /usr ...) and copy everything over. But how do I make it bootable? -- Again we must be afraid of speaking of daemons for fear that daemons might swallow us. Finally, this fear has become reasonable.
Re: [gentoo-user] installing Gentoo in a xen VM
J. Roeleveld jo...@antarean.org writes: On Monday, December 29, 2014 03:38:40 AM lee wrote: J. Roeleveld jo...@antarean.org writes: What do you mean with unusable? The bridge swallows the physical port, and the port becomes unreachable. IIRC, you can get around this by assigning an IP address to the bridge rather than to the physical port ... In any case, I'm finding bridges very confusing. This is by design and is documented that way all over the web. Nonetheless, I find them very confusing. pass virtual NICs to the VMs which are part of the bridges. Doesn't that create more CPU load than passing the port? Do you have an IOMMU on the host? I don't notice any significant increase in CPU-usage caused by the network layer. Yes, and the kernel turns it off. Apparently it's expected to be more advantageous for some reason to use software emulation instead. Huh? That is usually because of a bug in the firmware on your server. Dunno, the kernel turned it off, so I read up about it and what I found indicated that using a software emulation of NUMA is supposed to to better --- make it sense or not. BTW, there's a kernel option to make the kernel adjust processes for better performance on NUMA systems. Does that work fine, or should I rather use numad? And at some point, you may saturate the bandwidth of the port. And how is this different from assigning the network interface directly? With more physical ports, you have more bandwidth available. See following: My switch supports bonding, which means I have a total of 4Gbit/s between the server and switch for all networks. (using VLANs) I don't know if mine does. If bandwidth is important to you, investing in a quality switch might be more useful. Unfortunately, they can be rather expensive. Unless you are forced to use some really weird configuration utility for the network, configuring a bridge and assiging the bridge in the xen-domain config file is simpler then assigning physical network interfaces. Hm, how is that simpler? And how do you keep the traffic separated when everything goes over the same bridge? What about pppoe connections? Multiple bridges? And how is that simpler? Isn't that somewhat unsafe since the bridge reaches into the host? Why would I set up a bridge, assign an interface to it, use special firewall rules and whatever else might be required instead of simply giving the physical port to the VM which does the pppoe connection and the firewalling and routing? More bridges are more confusing. You're kinda suggesting that it's simpler to live on an island which has 50 bridges connecting it to some mainland where you have to go every day for work than it is to work on the island. That seems to me like taking a long detour every day. -- Again we must be afraid of speaking of daemons for fear that daemons might swallow us. Finally, this fear has become reasonable.
Re: [gentoo-user] installing Gentoo in a xen VM
J. Roeleveld jo...@antarean.org writes:
with firewalling and routing in between. You can't keep the traffic
separate when it all goes over the same bridge, can you?
Not if it goes over the same bridge. But as they are virtual, you can make as
many as you need.
I made as few as I needed. What sense would it make to, necessarily,
use a physical port for a pppoe connection and then go to the lengths of
creating a bridge for it to somehow bring it over to the VM? I found it
way easier to just pass the physical port to the VM.
am i missing where the fight is ?
setting up the bridges
Really simple, there are plenty of guides around. Including how to configure
it
using netifrc (which is installed by default on Gentoo)
Creating a bridge isn't too difficult; getting it work is.
no documentation about in which order a VM will see the devices
Same goes for physical devices.
That doesn't make it any better.
Use udev-rules to name the interfaces
logically based on the MAC-address:
***
# cat 70-persistent-net.rules
SUBSYSTEM==net, ACTION==add, DRIVERS==?*,
ATTR{address}==00:16:3e:16:01:01, ATTR{dev_id}==0x0, ATTR{type}==1,
KERNEL==eth*, NAME=lan
SUBSYSTEM==net, ACTION==add, DRIVERS==?*,
ATTR{address}==00:16:3e:16:01:02, ATTR{dev_id}==0x0, ATTR{type}==1,
KERNEL==eth*, NAME=dmz
***
Who understands udev?
a handful of bridges and VMs
Only 1 bridge per network segment is needed.
Yes, and that makes for a handful.
a firewall/router VM with it's passed-through port for pppoe and three
bridges
Not difficult, had that for years till I moved the router to a seperate
machine.
(Needed something small to fit the room where it lives)
It's extremely confusing, difficult and complicated.
the xen documentation being an awful mess
A lot of it is outdated. A big cleanup would be useful there.
Yes, it tells you lots of things that you find not to work and confuses
you even more until you don't know what to do anymore because nothing
works.
an awful lot of complexity required
There is a logic to it.
If there is, it continues to escape me.
Just why can't you? ZFS apparently can do such things --- yet what's
the difference in performance of ZFS compared to hardware raid?
Software raid with MD makes for quite a slowdown.
What do you consider hardware raid in this comparison?
A decent hardware raid controller, like an HP smart array P800 or an IBM
ServeRaid 8k --- of course, they are outdated, yet they work well.
Most so-called hardware raid cards depend heavily on the host CPU to do all
the calculations and the code used is extremely inefficient.
The Linux build-in software raid layer ALWAYS outperforms those cards.
You mean the fake controllers? I wouldn't use those.
The true hardware raid cards have their own calculation chips to do the heavy
lifting. Those actually stand a chance to outperform the linux software raid
layer. It depends on the spec of the host CPU and what you use the system for.
With all CPUs, relatively slow and relatively fast ones, I do notice an
awful sluggishness with software raid which hardware raid simply doesn't
have. This sluggishness might not be considered or even noticed by a
benchmark you might run, yet it is there.
ZFS and BTRFS runs fully on the host CPU, but has some additional logic built-
in which allows it to generally outperform hardware raid.
I can't tell for sure yet; so far, it seems that they do better than md
raid. Btrfs needs some more development ... ZFS with SSD cache is
probably hard to beat.
I could do with a hardware controller which can be used to off-load all the
heavy lifting for the RAIDZ-calculations away from the CPU. And if the stuff
for the deduplication could also be done that way?
Yes, I've already been wondering why they don't make hardware ZFS
controllers. There doesn't seem to be much point in making classical
hardware raid controllers while ZFS has so many advantages over them.
the only issue with bridges is that if eth0 is in the bridge, if you try
to use eth0 directly with for example an IP address things go a bit
weird, so you have to use br0 instead
so don't do that.
Yes, it's very confusing.
It's just using a different name. Once it's configured, the network layer of
the
OS handles it for you.
I understand things by removing abstractions. When you remove all
abstractions from a bridge, there isn't anything left. A network card,
you can take into your hands and look at it; you can plug and unplug the
wire(s); these cards usually have fancy lights to show you whether
there's a connection or not, and the lights even blink when there's
network traffic. A bridge doesn't exist, has nothing and shows you
nothing. It's not understandable because it isn't anything, no matter
how it's called or handled.
--
Again we must be afraid of speaking of daemons for fear that daemons
might swallow us. Finally, this fear has become reasonable.
Re: [gentoo-user] installing Gentoo in a xen VM
On 29/12/14 13:55, lee wrote: thegeezer thegee...@thegeezer.net writes: On 08/12/14 22:17, lee wrote: J. Roeleveld jo...@antarean.org writes: create 1 bridge per physical network port add the physical ports to the respective bridges That tends to make the ports disappear, i. e. become unusable, because the bridge swallows them. and if you pass the device then it becomes unusable to the host The VM uses it instead, which is what I wanted :) pass virtual NICs to the VMs which are part of the bridges. Doesn't that create more CPU load than passing the port? And at some point, you may saturate the bandwidth of the port. some forward planning is needed. obviously if you have two file servers using the same bridge and that bridge only has one physical port and the SAN is not part of the host then you might run into trouble. however, you can use bonding in various ways to group connections -- and in this way you can have a virtual nic that actually has 2x 1GB bonded devices, or if you choose to upgrade at a later stage you can start putting in 10GbE cards and the virtual machine sees nothing different, just access is faster. on the flip side you can have four or more relatively low bandwidth requirement virtual machines running on the same host through the same single physical port think of the bridge as an internal, virtual, network switch... you wouldn't load up a switch with 47 high bandwidth requirement servers and then create a single uplink to the SAN / other network without seriously considering bonding or partitioning in some way to reduce the 47into1 bottleneck, and the same is true of the virtual-switch (bridge) the difference is that you need to physically be there to repatch connections or to add a new switch when you run out of ports. these limitations are largely overcome. That all makes sense; my situation is different, though. I plugged a dual port card into the server and wanted to use one of the ports for another internet connection and the other one for a separate network, with firewalling and routing in between. You can't keep the traffic separate when it all goes over the same bridge, can you? And the file server could get it's own physical port --- not because it's really needed but because it's possible. I could plug in another dual-port card for that and experiment with bonding. However, I've changed plans and intend to use a workstation as a hybrid system to reduce power consumption and noise, and such a setup has other advantages, too. I'll put Gentoo on it and probably use containers for the VMs. Then I can still use the server for experiments and/or run distcc on it when I want to. The only issue I have with passing the port is that the kernel module must not be loaded from the initrd image. So I don't see how fighting with the bridges would make things easier. vif=[ 'mac=de:ad:be:ef:00:01,bridge=br0' ] am i missing where the fight is ? setting up the bridges no documentation about in which order a VM will see the devices a handful of bridges and VMs a firewall/router VM with it's passed-through port for pppoe and three bridges the xen documentation being an awful mess an awful lot of complexity required Guess what, I still haven't found out how to actually back up and restore a VM residing in an LVM volume. I find it annoying that LVM doesn't have any way of actually copying a LV. It could be so easy if you could just do something like 'lvcopy lv_source other_host:/backups/lv_source_backup' and 'lvrestore other_host:/backups/lv_source_backup vg_target/lv_source' --- or store the copy of the LV in a local file somewhere. agreed. you have two choices, you can either use dd and clone the LV like a normal partition. alternatively you can use split mirrors and i do this to clone up physical devices: 1. make a mirror of the lv you want to copy to /dev/usb1 2. # lvconvert --splitmirrors 2 --name copy vg/lv /dev/usb1 in 2 it says split the mirror into two parts give the new version the name 'copy' leave this on the pv /dev/usb1 you then need to remove it if you want from your voume group Just why can't you? ZFS apparently can do such things --- yet what's the difference in performance of ZFS compared to hardware raid? Software raid with MD makes for quite a slowdown. sorry but that's just not true, if you choose the correct raid level and stripe it can easily compete, and be more portable (you don't have to find the identical raid card if the raid card goes bang); many raid card i would argue are even underpowered for their required iops the only issue with bridges is that if eth0 is in the bridge, if you try to use eth0 directly with for example an IP address things go a bit weird, so you have to use br0 instead so don't do that. Yes, it's very confusing. perhaps you don't need a full bridge and you might just prefer to lookup macvlan instead. this lets you create a new
Re: [gentoo-user] installing Gentoo in a xen VM
On Monday, December 29, 2014 02:55:49 PM lee wrote:
thegeezer thegee...@thegeezer.net writes:
On 08/12/14 22:17, lee wrote:
J. Roeleveld jo...@antarean.org writes:
create 1 bridge per physical network port
add the physical ports to the respective bridges
That tends to make the ports disappear, i. e. become unusable, because
the bridge swallows them.
and if you pass the device then it becomes unusable to the host
The VM uses it instead, which is what I wanted :)
pass virtual NICs to the VMs which are part of the bridges.
Doesn't that create more CPU load than passing the port? And at some
point, you may saturate the bandwidth of the port.
some forward planning is needed. obviously if you have two file servers
using the same bridge and that bridge only has one physical port and the
SAN is not part of the host then you might run into trouble. however,
you can use bonding in various ways to group connections -- and in this
way you can have a virtual nic that actually has 2x 1GB bonded devices,
or if you choose to upgrade at a later stage you can start putting in
10GbE cards and the virtual machine sees nothing different, just access
is faster.
on the flip side you can have four or more relatively low bandwidth
requirement virtual machines running on the same host through the same
single physical port
think of the bridge as an internal, virtual, network switch... you
wouldn't load up a switch with 47 high bandwidth requirement servers and
then create a single uplink to the SAN / other network without seriously
considering bonding or partitioning in some way to reduce the 47into1
bottleneck, and the same is true of the virtual-switch (bridge)
the difference is that you need to physically be there to repatch
connections or to add a new switch when you run out of ports. these
limitations are largely overcome.
That all makes sense; my situation is different, though. I plugged a
dual port card into the server and wanted to use one of the ports for
another internet connection and the other one for a separate network,
with firewalling and routing in between. You can't keep the traffic
separate when it all goes over the same bridge, can you?
Not if it goes over the same bridge. But as they are virtual, you can make as
many as you need.
And the file server could get it's own physical port --- not because
it's really needed but because it's possible. I could plug in another
dual-port card for that and experiment with bonding.
How many slots do you have for all those cards?
And don't forget there is a bandwidth limit on the PCI-bus.
However, I've changed plans and intend to use a workstation as a hybrid
system to reduce power consumption and noise, and such a setup has other
advantages, too. I'll put Gentoo on it and probably use containers for
the VMs. Then I can still use the server for experiments and/or run
distcc on it when I want to.
Most people use a low-power machine as a server and use the fast machine as a
workstation to keep power consumption and noise down.
The only issue I have with passing the port is that the kernel module
must not be loaded from the initrd image. So I don't see how fighting
with the bridges would make things easier.
vif=[ 'mac=de:ad:be:ef:00:01,bridge=br0' ]
am i missing where the fight is ?
setting up the bridges
Really simple, there are plenty of guides around. Including how to configure it
using netifrc (which is installed by default on Gentoo)
no documentation about in which order a VM will see the devices
Same goes for physical devices. Use udev-rules to name the interfaces
logically based on the MAC-address:
***
# cat 70-persistent-net.rules
SUBSYSTEM==net, ACTION==add, DRIVERS==?*,
ATTR{address}==00:16:3e:16:01:01, ATTR{dev_id}==0x0, ATTR{type}==1,
KERNEL==eth*, NAME=lan
SUBSYSTEM==net, ACTION==add, DRIVERS==?*,
ATTR{address}==00:16:3e:16:01:02, ATTR{dev_id}==0x0, ATTR{type}==1,
KERNEL==eth*, NAME=dmz
***
a handful of bridges and VMs
Only 1 bridge per network segment is needed.
a firewall/router VM with it's passed-through port for pppoe and three
bridges
Not difficult, had that for years till I moved the router to a seperate
machine.
(Needed something small to fit the room where it lives)
the xen documentation being an awful mess
A lot of it is outdated. A big cleanup would be useful there.
an awful lot of complexity required
There is a logic to it. If you use the basic xen install, you need to do every
layer yourself.
You could also opt to go for a more ready product, like XCP, Vmware ESX,...
Those will do more for you, but also hide the interesting details to the point
of being annoying.
Bit like using Ubuntu or Redhat instead of Gentoo.
Guess what, I still haven't found out how to actually back up and
restore a VM residing in an LVM volume. I find it annoying that LVM
doesn't have any way of actually copying a LV. It
Re: [gentoo-user] installing Gentoo in a xen VM
On Tue, Dec 30, 2014 at 1:05 PM, J. Roeleveld jo...@antarean.org wrote: I could do with a hardware controller which can be used to off-load all the heavy lifting for the RAIDZ-calculations away from the CPU. And if the stuff for the deduplication could also be done that way? The CPU is the least of the reasons why ZFS/btrfs will outperform traditional RAID. Most of the benefits come from avoiding disk operations. If you write 1 byte to the middle of a file ext4 will overwrite one block in-place, and md will read a stripe and then rewrite the stripe. If you write 1 byte to the middle of a file on btrfs (and likely zfs) it will just write 1 byte to the metadata and bunch it up with a bunch of other writes, likely overwriting an entire stripe at once so that there is no need to read the strip first. If you copy a file in btrfs it will just create a reflink and it is a metadata-only change, etc. If you scrub your array the filesystem knows what blocks are in use and only those get checked, and if the filesystem has checksums at the block level it can do the scrub asynchronously which impacts reads less, etc. I'm sure that CPU optimizations count for something, but avoiding disk IO is going to have a much larger impact, especially with spinning disks. -- Rich
Re: [gentoo-user] installing Gentoo in a xen VM
Mick michaelkintz...@gmail.com writes: On Monday 29 Dec 2014 02:25:04 lee wrote: I tried out the latest Gentoo live DVD ... and I was surprised that the software it comes with is so old. Libreoffice 3.x? Seamonkey a couple versions behind? Is the software going to be more recent when I actually install? During installation you will run 'emerge --sync' which will update portage with the latest and greatest for each package ebuild. Then 'emerge --update --newuse --deep --ask world' will install the latest version of any package you may have installed, or install thereafter in your system (like libreoffice, etc.) That's what I thought ... I tried 'emerge --sync' or so with the live system, and it seemed to receive lots of updates. But why use old software for a recent live DVD? -- Again we must be afraid of speaking of daemons for fear that daemons might swallow us. Finally, this fear has become reasonable.
Re: [gentoo-user] installing Gentoo in a xen VM
thegeezer thegee...@thegeezer.net writes: On 08/12/14 22:17, lee wrote: J. Roeleveld jo...@antarean.org writes: create 1 bridge per physical network port add the physical ports to the respective bridges That tends to make the ports disappear, i. e. become unusable, because the bridge swallows them. and if you pass the device then it becomes unusable to the host The VM uses it instead, which is what I wanted :) pass virtual NICs to the VMs which are part of the bridges. Doesn't that create more CPU load than passing the port? And at some point, you may saturate the bandwidth of the port. some forward planning is needed. obviously if you have two file servers using the same bridge and that bridge only has one physical port and the SAN is not part of the host then you might run into trouble. however, you can use bonding in various ways to group connections -- and in this way you can have a virtual nic that actually has 2x 1GB bonded devices, or if you choose to upgrade at a later stage you can start putting in 10GbE cards and the virtual machine sees nothing different, just access is faster. on the flip side you can have four or more relatively low bandwidth requirement virtual machines running on the same host through the same single physical port think of the bridge as an internal, virtual, network switch... you wouldn't load up a switch with 47 high bandwidth requirement servers and then create a single uplink to the SAN / other network without seriously considering bonding or partitioning in some way to reduce the 47into1 bottleneck, and the same is true of the virtual-switch (bridge) the difference is that you need to physically be there to repatch connections or to add a new switch when you run out of ports. these limitations are largely overcome. That all makes sense; my situation is different, though. I plugged a dual port card into the server and wanted to use one of the ports for another internet connection and the other one for a separate network, with firewalling and routing in between. You can't keep the traffic separate when it all goes over the same bridge, can you? And the file server could get it's own physical port --- not because it's really needed but because it's possible. I could plug in another dual-port card for that and experiment with bonding. However, I've changed plans and intend to use a workstation as a hybrid system to reduce power consumption and noise, and such a setup has other advantages, too. I'll put Gentoo on it and probably use containers for the VMs. Then I can still use the server for experiments and/or run distcc on it when I want to. The only issue I have with passing the port is that the kernel module must not be loaded from the initrd image. So I don't see how fighting with the bridges would make things easier. vif=[ 'mac=de:ad:be:ef:00:01,bridge=br0' ] am i missing where the fight is ? setting up the bridges no documentation about in which order a VM will see the devices a handful of bridges and VMs a firewall/router VM with it's passed-through port for pppoe and three bridges the xen documentation being an awful mess an awful lot of complexity required Guess what, I still haven't found out how to actually back up and restore a VM residing in an LVM volume. I find it annoying that LVM doesn't have any way of actually copying a LV. It could be so easy if you could just do something like 'lvcopy lv_source other_host:/backups/lv_source_backup' and 'lvrestore other_host:/backups/lv_source_backup vg_target/lv_source' --- or store the copy of the LV in a local file somewhere. Just why can't you? ZFS apparently can do such things --- yet what's the difference in performance of ZFS compared to hardware raid? Software raid with MD makes for quite a slowdown. the only issue with bridges is that if eth0 is in the bridge, if you try to use eth0 directly with for example an IP address things go a bit weird, so you have to use br0 instead so don't do that. Yes, it's very confusing. perhaps you don't need a full bridge and you might just prefer to lookup macvlan instead. this lets you create a new virtual device that behaves much more like a secondary nic e.g. in /etc/conf.d/net macvlan_xenguest1=eth0 mode_xenguest1=private mac_xenguest1=de:ad:be:ef:00:01 config_xenguest1=192.168.1.12/24 routes_xenguest1=default via 192.168.1.1 modules_xenguest1=!ifplugd you can then /etc/init.d/net.xenguest1 start i'm not big into xen but i believe you should be able to pass this as a physical device to xen and it then comes out on network interface eth0 this way you get to keep your port without it being eaten by the bridge do let me know if this works with xen i'll add it to my toolbox Hmm, and where's the other end of it? Some physical port? So it's like plugging in several virtual cables into the same physical port, with a built-in firewall and router? -- Again we must be afraid of speaking
Re: [gentoo-user] installing Gentoo in a xen VM
On Mon, Dec 29, 2014 at 8:55 AM, lee l...@yagibdah.de wrote: Just why can't you? ZFS apparently can do such things --- yet what's the difference in performance of ZFS compared to hardware raid? Software raid with MD makes for quite a slowdown. Well, there is certainly no reason that you couldn't serialize a logical volume as far as design goes. It just isn't implemented (as far as I'm aware), though you certainly can just dd the contents of a logical volume. ZFS performs far better in such situations because you're usually just snapshotting and not copying data at all (though ZFS DOES support serialization which of course requires copying data, though it can be done very efficiently if you're snapshotting since the filesystem can detect changes without having to read everything). Incidentally, other than lacking maturity btrfs has the same capabilities. The reason ZFS (and btrfs) are able to perform better is that they dictate the filesystem, volume management, and RAID layers. md has to support arbitrary data being stored on top of it - it is just a big block device which is just a gigantic array. ZFS actually knows what is in all those blocks, and it doesn't need to copy data that it knows hasn't changed, protect blocks when it knows they don't contain data, and so on. You could probably improve on mdadm by implementing additional TRIM-like capabilities for it so that filesystems could inform it better about the state of blocks, which of course would have to be supported by the filesystem. However, I doubt it will ever work as well as something like ZFS where all this stuff is baked into every level of the design. -- Rich
Re: [gentoo-user] installing Gentoo in a xen VM
On Monday, December 29, 2014 03:38:40 AM lee wrote: J. Roeleveld jo...@antarean.org writes: What do you mean with unusable? The bridge swallows the physical port, and the port becomes unreachable. IIRC, you can get around this by assigning an IP address to the bridge rather than to the physical port ... In any case, I'm finding bridges very confusing. This is by design and is documented that way all over the web. pass virtual NICs to the VMs which are part of the bridges. Doesn't that create more CPU load than passing the port? Do you have an IOMMU on the host? I don't notice any significant increase in CPU-usage caused by the network layer. Yes, and the kernel turns it off. Apparently it's expected to be more advantageous for some reason to use software emulation instead. Huh? That is usually because of a bug in the firmware on your server. And at some point, you may saturate the bandwidth of the port. And how is this different from assigning the network interface directly? With more physical ports, you have more bandwidth available. See following: My switch supports bonding, which means I have a total of 4Gbit/s between the server and switch for all networks. (using VLANs) I don't know if mine does. If bandwidth is important to you, investing in a quality switch might be more useful. But it's your server, you decide on the complexity. I stopped passing physical NICs when I was encountering issues with newer cards. They are now resolved, but passing virtual interfaces is simpler and more reliable. The only issue I have with passing the port is that the kernel module must not be loaded from the initrd image. So I don't see how fighting with the bridges would make things easier. Unless you are forced to use some really weird configuration utility for the network, configuring a bridge and assiging the bridge in the xen-domain config file is simpler then assigning physical network interfaces. Hm, how is that simpler? And how do you keep the traffic separated when everything goes over the same bridge? What about pppoe connections? Multiple bridges? -- Joost
Re: [gentoo-user] installing Gentoo in a xen VM
J. Roeleveld jo...@antarean.org writes: On Thursday, December 04, 2014 11:55:50 PM lee wrote: BTW, can I use xfs for the VM, or will it be difficult to get the VM booted from xfs? Using PV, not at all. As long as the kernel for the VM has XFS support built- in. (This is valid for other filesystems as well) Oh that's good to know. I've found that Gentoo comes with ZFS, and if I can create a ZFS file system from some disks and boot from that without further ado, that might be pretty cool. I tried out the latest Gentoo live DVD ... and I was surprised that the software it comes with is so old. Libreoffice 3.x? Seamonkey a couple versions behind? Is the software going to be more recent when I actually install? Once you're in the chroot then you should install the kernel/etc per the handbook. So there isn't really an advantage to use HVM ... it's even easier because I can access the LV from dom0. Not really. For the PV, there isn't even a necessity to have a kernel in the VM at all as it is simpler to have the kernel on the filesystem belonging to the host and point the config to that. ATM, I'm looking at LXC instead of VMs. I'm planning to make some changes again, and containers seem very appealing. -- Again we must be afraid of speaking of daemons for fear that daemons might swallow us. Finally, this fear has become reasonable.
Re: [gentoo-user] installing Gentoo in a xen VM
J. Roeleveld jo...@antarean.org writes: On Monday, December 08, 2014 11:17:26 PM lee wrote: J. Roeleveld jo...@antarean.org writes: create 1 bridge per physical network port add the physical ports to the respective bridges That tends to make the ports disappear, i. e. become unusable, because the bridge swallows them. What do you mean with unusable? The bridge swallows the physical port, and the port becomes unreachable. IIRC, you can get around this by assigning an IP address to the bridge rather than to the physical port ... In any case, I'm finding bridges very confusing. pass virtual NICs to the VMs which are part of the bridges. Doesn't that create more CPU load than passing the port? Do you have an IOMMU on the host? I don't notice any significant increase in CPU-usage caused by the network layer. Yes, and the kernel turns it off. Apparently it's expected to be more advantageous for some reason to use software emulation instead. And at some point, you may saturate the bandwidth of the port. And how is this different from assigning the network interface directly? With more physical ports, you have more bandwidth available. My switch supports bonding, which means I have a total of 4Gbit/s between the server and switch for all networks. (using VLANs) I don't know if mine does. But it's your server, you decide on the complexity. I stopped passing physical NICs when I was encountering issues with newer cards. They are now resolved, but passing virtual interfaces is simpler and more reliable. The only issue I have with passing the port is that the kernel module must not be loaded from the initrd image. So I don't see how fighting with the bridges would make things easier. Unless you are forced to use some really weird configuration utility for the network, configuring a bridge and assiging the bridge in the xen-domain config file is simpler then assigning physical network interfaces. Hm, how is that simpler? And how do you keep the traffic separated when everything goes over the same bridge? What about pppoe connections? -- Again we must be afraid of speaking of daemons for fear that daemons might swallow us. Finally, this fear has become reasonable.
Re: [gentoo-user] installing Gentoo in a xen VM
On Monday 29 Dec 2014 02:25:04 lee wrote: J. Roeleveld jo...@antarean.org writes: On Thursday, December 04, 2014 11:55:50 PM lee wrote: BTW, can I use xfs for the VM, or will it be difficult to get the VM booted from xfs? Using PV, not at all. As long as the kernel for the VM has XFS support built- in. (This is valid for other filesystems as well) Oh that's good to know. I've found that Gentoo comes with ZFS, and if I can create a ZFS file system from some disks and boot from that without further ado, that might be pretty cool. I tried out the latest Gentoo live DVD ... and I was surprised that the software it comes with is so old. Libreoffice 3.x? Seamonkey a couple versions behind? Is the software going to be more recent when I actually install? During installation you will run 'emerge --sync' which will update portage with the latest and greatest for each package ebuild. Then 'emerge --update --newuse --deep --ask world' will install the latest version of any package you may have installed, or install thereafter in your system (like libreoffice, etc.) -- Regards, Mick signature.asc Description: This is a digitally signed message part.
Re: [gentoo-user] installing Gentoo in a xen VM
On Tuesday, December 09, 2014 02:26:24 PM thegeezer wrote: On 08/12/14 22:17, lee wrote: J. Roeleveld jo...@antarean.org writes: create 1 bridge per physical network port add the physical ports to the respective bridges That tends to make the ports disappear, i. e. become unusable, because the bridge swallows them. and if you pass the device then it becomes unusable to the host Pass device: It is unavailable to the host Add it to a bridge: you can still have an IP on that network. pass virtual NICs to the VMs which are part of the bridges. Doesn't that create more CPU load than passing the port? And at some point, you may saturate the bandwidth of the port. some forward planning is needed. obviously if you have two file servers using the same bridge and that bridge only has one physical port and the SAN is not part of the host then you might run into trouble. Same is true when you have a single dumb switch with physical machines instead of VMs. however, you can use bonding in various ways to group connections -- and in this way you can have a virtual nic that actually has 2x 1GB bonded devices, or if you choose to upgrade at a later stage you can start putting in 10GbE cards and the virtual machine sees nothing different, just access is faster. +1, it really is that simple. on the flip side you can have four or more relatively low bandwidth requirement virtual machines running on the same host through the same single physical port think of the bridge as an internal, virtual, network switch... you wouldn't load up a switch with 47 high bandwidth requirement servers and then create a single uplink to the SAN / other network without seriously considering bonding or partitioning in some way to reduce the 47into1 bottleneck, and the same is true of the virtual-switch (bridge) The virtual-switch can handle more bandwidth then a physical one (unless you pay for high-speed hardware) the difference is that you need to physically be there to repatch connections or to add a new switch when you run out of ports. these limitations are largely overcome. But it's your server, you decide on the complexity. I stopped passing physical NICs when I was encountering issues with newer cards. They are now resolved, but passing virtual interfaces is simpler and more reliable. The only issue I have with passing the port is that the kernel module must not be loaded from the initrd image. So I don't see how fighting with the bridges would make things easier. vif=[ 'mac=de:ad:be:ef:00:01,bridge=br0' ] am i missing where the fight is ? I'm wondering the same. :) the only issue with bridges is that if eth0 is in the bridge, if you try to use eth0 directly with for example an IP address things go a bit weird, so you have to use br0 instead Give br0 an IP instead of eth0 and it will work. so don't do that. perhaps you don't need a full bridge and you might just prefer to lookup macvlan instead. this lets you create a new virtual device that behaves much more like a secondary nic e.g. in /etc/conf.d/net macvlan_xenguest1=eth0 mode_xenguest1=private mac_xenguest1=de:ad:be:ef:00:01 config_xenguest1=192.168.1.12/24 routes_xenguest1=default via 192.168.1.1 modules_xenguest1=!ifplugd you can then /etc/init.d/net.xenguest1 start i'm not big into xen but i believe you should be able to pass this as a physical device to xen and it then comes out on network interface eth0 this way you get to keep your port without it being eaten by the bridge do let me know if this works with xen i'll add it to my toolbox I never heard of macvlan myself, but the networking I use is as follows: # using the udev name randomizer names as the kernel-option is ignored config_enp4s0=null config_enp5s0=null config_enp6s0=null config_enp7s0=null # Add all physical ports into a single bonded interface slaves_bond0=enp4s0 enp5s0 enp6s0 enp7s0 config_bond0=null rc_net_bond0_need=net.enp4s0 net.enp5s0 net.enp6s0 net.enp7s0 # Split the bonded interface into seperate VLANs. vlans_bond0=1 2 3 4 vlan1_name=lan vlan2_name=gst vlan3_name=vm vlan4_name=net vlan_start_bond0=no rc_net_adm_need=net.bond0 rc_net_lan_need=net.bond0 rc_net_net_need=net.bond0 # Configure the bridges config_lan=null bridge_brlan=lan rc_net_brlan_need=net.lan config_gst=null bridge_brgst=gst
Re: [gentoo-user] installing Gentoo in a xen VM
On Monday, December 08, 2014 11:17:26 PM lee wrote: J. Roeleveld jo...@antarean.org writes: create 1 bridge per physical network port add the physical ports to the respective bridges That tends to make the ports disappear, i. e. become unusable, because the bridge swallows them. What do you mean with unusable? pass virtual NICs to the VMs which are part of the bridges. Doesn't that create more CPU load than passing the port? Do you have an IOMMU on the host? I don't notice any significant increase in CPU-usage caused by the network layer. And at some point, you may saturate the bandwidth of the port. And how is this different from assigning the network interface directly? My switch supports bonding, which means I have a total of 4Gbit/s between the server and switch for all networks. (using VLANs) But it's your server, you decide on the complexity. I stopped passing physical NICs when I was encountering issues with newer cards. They are now resolved, but passing virtual interfaces is simpler and more reliable. The only issue I have with passing the port is that the kernel module must not be loaded from the initrd image. So I don't see how fighting with the bridges would make things easier. Unless you are forced to use some really weird configuration utility for the network, configuring a bridge and assiging the bridge in the xen-domain config file is simpler then assigning physical network interfaces. -- Joost
Re: [gentoo-user] installing Gentoo in a xen VM
On 08/12/14 22:17, lee wrote: J. Roeleveld jo...@antarean.org writes: create 1 bridge per physical network port add the physical ports to the respective bridges That tends to make the ports disappear, i. e. become unusable, because the bridge swallows them. and if you pass the device then it becomes unusable to the host pass virtual NICs to the VMs which are part of the bridges. Doesn't that create more CPU load than passing the port? And at some point, you may saturate the bandwidth of the port. some forward planning is needed. obviously if you have two file servers using the same bridge and that bridge only has one physical port and the SAN is not part of the host then you might run into trouble. however, you can use bonding in various ways to group connections -- and in this way you can have a virtual nic that actually has 2x 1GB bonded devices, or if you choose to upgrade at a later stage you can start putting in 10GbE cards and the virtual machine sees nothing different, just access is faster. on the flip side you can have four or more relatively low bandwidth requirement virtual machines running on the same host through the same single physical port think of the bridge as an internal, virtual, network switch... you wouldn't load up a switch with 47 high bandwidth requirement servers and then create a single uplink to the SAN / other network without seriously considering bonding or partitioning in some way to reduce the 47into1 bottleneck, and the same is true of the virtual-switch (bridge) the difference is that you need to physically be there to repatch connections or to add a new switch when you run out of ports. these limitations are largely overcome. But it's your server, you decide on the complexity. I stopped passing physical NICs when I was encountering issues with newer cards. They are now resolved, but passing virtual interfaces is simpler and more reliable. The only issue I have with passing the port is that the kernel module must not be loaded from the initrd image. So I don't see how fighting with the bridges would make things easier. vif=[ 'mac=de:ad:be:ef:00:01,bridge=br0' ] am i missing where the fight is ? the only issue with bridges is that if eth0 is in the bridge, if you try to use eth0 directly with for example an IP address things go a bit weird, so you have to use br0 instead so don't do that. perhaps you don't need a full bridge and you might just prefer to lookup macvlan instead. this lets you create a new virtual device that behaves much more like a secondary nic e.g. in /etc/conf.d/net macvlan_xenguest1=eth0 mode_xenguest1=private mac_xenguest1=de:ad:be:ef:00:01 config_xenguest1=192.168.1.12/24 routes_xenguest1=default via 192.168.1.1 modules_xenguest1=!ifplugd you can then /etc/init.d/net.xenguest1 start i'm not big into xen but i believe you should be able to pass this as a physical device to xen and it then comes out on network interface eth0 this way you get to keep your port without it being eaten by the bridge do let me know if this works with xen i'll add it to my toolbox
Re: [gentoo-user] installing Gentoo in a xen VM
On Sunday, December 07, 2014 11:43:38 PM lee wrote: J. Roeleveld jo...@antarean.org writes: On Thursday, December 04, 2014 07:11:12 PM lee wrote: Why is the networking complicated? Do you use bridging? Yes --- and it was terrible to begin with and still is very complicated. One of the VMs has a network card passed through to do pppoe for the internet connection, and it also does routing and firewalling. The Gentoo VM is supposed to have another network card passed through because I want a separate network for miscellaneous devices like IP phones and printers. Asterisk is going to run on the Gentoo VM. This sounds convoluted. Why add to the complexity by adding multiple network cards into the machine and pass the physical cards? How else do you do pppoe and keep the different networks physically seperated? Networks that need to be physically seperated, require either of: 1) seperate NICs 2) VLANs My comment about the complexity, however, was related to passing physical cards to the VMs instead of adding the cards to seperate bridges inside the host and using virtual NICs. Besides devices, there's the usual net, dmz and loc zones. To top it off, sooner or later I want to pass another network card to the firewall/router because I have an internet connection which is currently not in use and should be employed as an automatic fallback. How many cards are you planning on having in the machine? Are all these connected to the same switch? It has currently four network ports. Only one of them is connected to the switch. Another one is connected to the pppoe line, and the other two (on a dual card) aren't connected yet. I plan to use one for the devices network and the other one for the second internet connection. None of them needs to/should be connected to the switch. The VM running asterisk will need a second interface that connects to a bridge so it can reach the router/firewall. The interface for the second internet connection needs to be passed to the router/firewall. Can you think of an easier setup? create 1 bridge per physical network port add the physical ports to the respective bridges pass virtual NICs to the VMs which are part of the bridges. But it's your server, you decide on the complexity. I stopped passing physical NICs when I was encountering issues with newer cards. They are now resolved, but passing virtual interfaces is simpler and more reliable. -- Joost -- Joost
Re: [gentoo-user] installing Gentoo in a xen VM
On 08/12/14 11:26, J. Roeleveld wrote: On Sunday, December 07, 2014 11:43:38 PM lee wrote: J. Roeleveld jo...@antarean.org writes: On Thursday, December 04, 2014 07:11:12 PM lee wrote: Why is the networking complicated? Do you use bridging? Yes --- and it was terrible to begin with and still is very complicated. One of the VMs has a network card passed through to do pppoe for the internet connection, and it also does routing and firewalling. The Gentoo VM is supposed to have another network card passed through because I want a separate network for miscellaneous devices like IP phones and printers. Asterisk is going to run on the Gentoo VM. This sounds convoluted. Why add to the complexity by adding multiple network cards into the machine and pass the physical cards? How else do you do pppoe and keep the different networks physically seperated? Networks that need to be physically seperated, require either of: 1) seperate NICs 2) VLANs My comment about the complexity, however, was related to passing physical cards to the VMs instead of adding the cards to seperate bridges inside the host and using virtual NICs. Besides devices, there's the usual net, dmz and loc zones. To top it off, sooner or later I want to pass another network card to the firewall/router because I have an internet connection which is currently not in use and should be employed as an automatic fallback. How many cards are you planning on having in the machine? Are all these connected to the same switch? It has currently four network ports. Only one of them is connected to the switch. Another one is connected to the pppoe line, and the other two (on a dual card) aren't connected yet. I plan to use one for the devices network and the other one for the second internet connection. None of them needs to/should be connected to the switch. The VM running asterisk will need a second interface that connects to a bridge so it can reach the router/firewall. The interface for the second internet connection needs to be passed to the router/firewall. Can you think of an easier setup? create 1 bridge per physical network port add the physical ports to the respective bridges pass virtual NICs to the VMs which are part of the bridges. But it's your server, you decide on the complexity. I stopped passing physical NICs when I was encountering issues with newer cards. They are now resolved, but passing virtual interfaces is simpler and more reliable. +1 for this i'm sure that one of the reasons that software defined networking is suddenly the next big buzzword is because a) the commodity hardware is now good enough to be comparable to custom asic switches and b) the amazing flexibility you have. ignoring the security issues of vlans, for a pure partitioning of the network it's very hard to beat linux+vlan switch, as you can have a virtual host have just a single network card which itself has ten vlans connected. with a vlan capable switch you can have those vlans not just be lan/dmz/wan but can section off departments too. you can then incredibly easily stand up a new server for just that department. without having to be too concerned about downing the whole server to fit a new NIC into it -- Joost -- Joost
Re: [gentoo-user] installing Gentoo in a xen VM
J. Roeleveld jo...@antarean.org writes: create 1 bridge per physical network port add the physical ports to the respective bridges That tends to make the ports disappear, i. e. become unusable, because the bridge swallows them. pass virtual NICs to the VMs which are part of the bridges. Doesn't that create more CPU load than passing the port? And at some point, you may saturate the bandwidth of the port. But it's your server, you decide on the complexity. I stopped passing physical NICs when I was encountering issues with newer cards. They are now resolved, but passing virtual interfaces is simpler and more reliable. The only issue I have with passing the port is that the kernel module must not be loaded from the initrd image. So I don't see how fighting with the bridges would make things easier. -- Again we must be afraid of speaking of daemons for fear that daemons might swallow us. Finally, this fear has become reasonable.
Re: [gentoo-user] installing Gentoo in a xen VM
On Thursday, December 04, 2014 07:11:12 PM lee wrote: Tomas Mozes tomas.mo...@shmu.sk writes: On 2014-12-04 11:08, lee wrote: Tomas Mozes tomas.mo...@shmu.sk writes: On 2014-12-04 02:14, lee wrote: snipped part already answered name = gentoobox kernel = /xen/_kernel/kernel-3.14.23-gentoo-xen extra = root=/dev/xvda1 net.ifnames=0 memory = 2500 vcpus = 4 vif = [ '' ] disk = [ '/dev/vg_data/gentoo-t1_root,raw,xvda1,rw' ] 'raw'? I'll have to look up what that does. You can read about PV: http://wiki.xenproject.org/wiki/Paravirtualization_%28PV%29 If you prefer HVM, then you create a partition and use the install-cd to boot. After your install cd boots up, you partition your disk provided by xen dom0 (Debian), chroot, unpack stage3 and install the system along with the kernel and a bootloader. You can boot your Gentoo with pvgrub that will handle the booting to grub and it will load the kernel. This way, the Gentoo machine is like a black box for your Debian. I would recommend starting with HVM. Hm, I haven't used HVM yet. Can I change over to PV after the installation is done? What's the advantage of starting with HVM? The disk is an LVM volume and won't be partitioned. I've found it more reasonable to use a separate LVM volume for swap. I never installed Gentoo. I could start with my desktop since I want to replace Fedora anyway. That's a bit troublesome because I either have to plug in some disks for it which I'd need to buy first (I might get two small SSDs), or I'd have to repartition the existing ones. Hmmm. I think I'll try a VM with PV first. If that doesn't work, no harm is done and I can still ask when I'm stuck. Oh I almost forgot: Does the VM need internet access during the installation? The network setup is awfully complicated in this case. Well, you can copy the files to another place, but I have never done this transformation. HVM is like a black box, you start like booting a normal machine. For production, I always use PV, but for starters, HVM is also fine. So you cannot easily change from HVM to PV? You can, but then you need to ensure the install has both the PV as well as the HVM drivers installed and can switch between them easily. Yes, you will need internet access because we compile everything as it goes, so you need to download the source files. Or, maybe you can download a livedvd, but I've never tried that. Why is the networking complicated? Do you use bridging? Yes --- and it was terrible to begin with and still is very complicated. One of the VMs has a network card passed through to do pppoe for the internet connection, and it also does routing and firewalling. The Gentoo VM is supposed to have another network card passed through because I want a separate network for miscellaneous devices like IP phones and printers. Asterisk is going to run on the Gentoo VM. This sounds convoluted. Why add to the complexity by adding multiple network cards into the machine and pass the physical cards? Besides devices, there's the usual net, dmz and loc zones. To top it off, sooner or later I want to pass another network card to the firewall/router because I have an internet connection which is currently not in use and should be employed as an automatic fallback. How many cards are you planning on having in the machine? Are all these connected to the same switch? -- Joost
Re: [gentoo-user] installing Gentoo in a xen VM
On Thursday, December 04, 2014 11:55:50 PM lee wrote: Rich Freeman ri...@gentoo.org writes: On Thu, Dec 4, 2014 at 3:39 PM, lee l...@yagibdah.de wrote: Rich Freeman ri...@gentoo.org writes: On Thu, Dec 4, 2014 at 1:11 PM, lee l...@yagibdah.de wrote: Tomas Mozes tomas.mo...@shmu.sk writes: The kernel is not in stage3, you have to compile it yourself (or download from somewhere). When you have the kernel image binary, the xen configuration for the host can be simple as: Compile it with what? Are the sources in stage3, or downloaded so that I can compile a suitable Gentoo kernel within the chroot? If you've never installed Gentoo anywhere I wouldn't suggest doing it for the first time under Xen. Gentoo stage3s include neither a binary kernel nor the sources. See: https://www.gentoo.org/doc/en/handbook/handbook-amd64.xml?part=1chap=7 That's confusing ... I would think that I can create the file system on the LV and extract the stage3 archive, then chroot into it. From there, I'd have to 'emerge gentoo-sources' and to compile a kernel. Isn't that easier or the same as booting on bare metal into some life system and doing these things from there? When you boot a CD on bare metal all you're doing is creating the file system, extracting the archive, and chrooting into it. So the outcome is the same either way. If your xen guest is going to run on a regular LV you certainly can just mount it on the host and chroot into it. That is exactly how I'd go about it. Yes, I've already created a LV for it (along with others I'm going to need). Then I got stuck because I wanted to create an xfs file system and found that I hadn't installed a package required for that and couldn't install it because there was some problem with downloading package lists which they only fixed some time later ... BTW, can I use xfs for the VM, or will it be difficult to get the VM booted from xfs? Using PV, not at all. As long as the kernel for the VM has XFS support built- in. (This is valid for other filesystems as well) Once you're in the chroot then you should install the kernel/etc per the handbook. So there isn't really an advantage to use HVM ... it's even easier because I can access the LV from dom0. Not really. For the PV, there isn't even a necessity to have a kernel in the VM at all as it is simpler to have the kernel on the filesystem belonging to the host and point the config to that. -- Joost
Re: [gentoo-user] installing Gentoo in a xen VM
J. Roeleveld jo...@antarean.org writes: On Thursday, December 04, 2014 07:11:12 PM lee wrote: Why is the networking complicated? Do you use bridging? Yes --- and it was terrible to begin with and still is very complicated. One of the VMs has a network card passed through to do pppoe for the internet connection, and it also does routing and firewalling. The Gentoo VM is supposed to have another network card passed through because I want a separate network for miscellaneous devices like IP phones and printers. Asterisk is going to run on the Gentoo VM. This sounds convoluted. Why add to the complexity by adding multiple network cards into the machine and pass the physical cards? How else do you do pppoe and keep the different networks physically seperated? Besides devices, there's the usual net, dmz and loc zones. To top it off, sooner or later I want to pass another network card to the firewall/router because I have an internet connection which is currently not in use and should be employed as an automatic fallback. How many cards are you planning on having in the machine? Are all these connected to the same switch? It has currently four network ports. Only one of them is connected to the switch. Another one is connected to the pppoe line, and the other two (on a dual card) aren't connected yet. I plan to use one for the devices network and the other one for the second internet connection. None of them needs to/should be connected to the switch. The VM running asterisk will need a second interface that connects to a bridge so it can reach the router/firewall. The interface for the second internet connection needs to be passed to the router/firewall. Can you think of an easier setup? -- Again we must be afraid of speaking of daemons for fear that daemons might swallow us. Finally, this fear has become reasonable.
Re: [gentoo-user] installing Gentoo in a xen VM
Tomas Mozes tomas.mo...@shmu.sk writes: On 2014-12-04 02:14, lee wrote: Hi, I'd like to give Gentoo a try and want to install it in a xen VM. The server is otherwise running Debian. What would be the best way to do this? Either you can run a virtual machine using paravirtualization (PV) or full virtualization (HVM). If you want to use PV, then you create a partition for Gentoo, chroot, unpack stage3 and prepare your system for booting (follow the handbook). Then you create a configuration for your xen domU (Gentoo), provide a kernel and start it. You don't need the install-cd in this situation, nor any bootloader. That's like what I thought I should do :) I'd like to use PV as it has some advantages. How do I provide a kernel? Is it contained in the stage3 archive? And no bootloader? How do I make the VM bootable then? All the guests are PV and use something called phygrub of which I don't know where it comes from. This installation process with xen is some sort of mystery to me. With Debian, I used a somehow specially prepared kernel which booted the Debian installer. From there, the installation was the same as installing on bare metal. If you prefer HVM, then you create a partition and use the install-cd to boot. After your install cd boots up, you partition your disk provided by xen dom0 (Debian), chroot, unpack stage3 and install the system along with the kernel and a bootloader. You can boot your Gentoo with pvgrub that will handle the booting to grub and it will load the kernel. This way, the Gentoo machine is like a black box for your Debian. I would recommend starting with HVM. Hm, I haven't used HVM yet. Can I change over to PV after the installation is done? What's the advantage of starting with HVM? The disk is an LVM volume and won't be partitioned. I've found it more reasonable to use a separate LVM volume for swap. I never installed Gentoo. I could start with my desktop since I want to replace Fedora anyway. That's a bit troublesome because I either have to plug in some disks for it which I'd need to buy first (I might get two small SSDs), or I'd have to repartition the existing ones. Hmmm. I think I'll try a VM with PV first. If that doesn't work, no harm is done and I can still ask when I'm stuck. Oh I almost forgot: Does the VM need internet access during the installation? The network setup is awfully complicated in this case. -- Again we must be afraid of speaking of daemons for fear that daemons might swallow us. Finally, this fear has become reasonable.
Re: [gentoo-user] installing Gentoo in a xen VM
Vladimir Romanov bluebo...@gmail.com writes: Well, what's the problem? When i do this, then i just install debian, xen kernel, then create some config, download gentoo install cd, run it, and follow the handbook. How do you run the installer CD in a PV VM? It's not like you could just boot it, or can you? -- Again we must be afraid of speaking of daemons for fear that daemons might swallow us. Finally, this fear has become reasonable.
Re: [gentoo-user] installing Gentoo in a xen VM
On 2014-12-04 11:08, lee wrote: Tomas Mozes tomas.mo...@shmu.sk writes: On 2014-12-04 02:14, lee wrote: Hi, I'd like to give Gentoo a try and want to install it in a xen VM. The server is otherwise running Debian. What would be the best way to do this? Either you can run a virtual machine using paravirtualization (PV) or full virtualization (HVM). If you want to use PV, then you create a partition for Gentoo, chroot, unpack stage3 and prepare your system for booting (follow the handbook). Then you create a configuration for your xen domU (Gentoo), provide a kernel and start it. You don't need the install-cd in this situation, nor any bootloader. That's like what I thought I should do :) I'd like to use PV as it has some advantages. How do I provide a kernel? Is it contained in the stage3 archive? And no bootloader? How do I make the VM bootable then? All the guests are PV and use something called phygrub of which I don't know where it comes from. This installation process with xen is some sort of mystery to me. With Debian, I used a somehow specially prepared kernel which booted the Debian installer. From there, the installation was the same as installing on bare metal. The kernel is not in stage3, you have to compile it yourself (or download from somewhere). When you have the kernel image binary, the xen configuration for the host can be simple as: name = gentoobox kernel = /xen/_kernel/kernel-3.14.23-gentoo-xen extra = root=/dev/xvda1 net.ifnames=0 memory = 2500 vcpus = 4 vif = [ '' ] disk = [ '/dev/vg_data/gentoo-t1_root,raw,xvda1,rw' ] You can read about PV: http://wiki.xenproject.org/wiki/Paravirtualization_%28PV%29 If you prefer HVM, then you create a partition and use the install-cd to boot. After your install cd boots up, you partition your disk provided by xen dom0 (Debian), chroot, unpack stage3 and install the system along with the kernel and a bootloader. You can boot your Gentoo with pvgrub that will handle the booting to grub and it will load the kernel. This way, the Gentoo machine is like a black box for your Debian. I would recommend starting with HVM. Hm, I haven't used HVM yet. Can I change over to PV after the installation is done? What's the advantage of starting with HVM? The disk is an LVM volume and won't be partitioned. I've found it more reasonable to use a separate LVM volume for swap. I never installed Gentoo. I could start with my desktop since I want to replace Fedora anyway. That's a bit troublesome because I either have to plug in some disks for it which I'd need to buy first (I might get two small SSDs), or I'd have to repartition the existing ones. Hmmm. I think I'll try a VM with PV first. If that doesn't work, no harm is done and I can still ask when I'm stuck. Oh I almost forgot: Does the VM need internet access during the installation? The network setup is awfully complicated in this case. Well, you can copy the files to another place, but I have never done this transformation. HVM is like a black box, you start like booting a normal machine. For production, I always use PV, but for starters, HVM is also fine. Yes, you will need internet access because we compile everything as it goes, so you need to download the source files. Or, maybe you can download a livedvd, but I've never tried that. Why is the networking complicated? Do you use bridging?
Re: [gentoo-user] installing Gentoo in a xen VM
On Thu, Dec 4, 2014 at 5:09 AM, lee l...@yagibdah.de wrote: Vladimir Romanov bluebo...@gmail.com writes: Well, what's the problem? When i do this, then i just install debian, xen kernel, then create some config, download gentoo install cd, run it, and follow the handbook. How do you run the installer CD in a PV VM? It's not like you could just boot it, or can you? Correct. I don't believe our install CDs are xen-enabled. You would need to boot from another environment, or install the files from outside of the xen environment. When I'm installing Gentoo on ec2 now I typically just boot any convenient EMI, mount an EBS image, extract a stage3, then install/configure a xen-enabled kernel. I haven't done an EC2 install in a while but I do have a .config that used to work lying around. I believe most of the instructions are on my blog as well - probably one of the more visited pages as it is probably helpful for getting any distro working on EC2/Xen. -- Rich
Re: [gentoo-user] installing Gentoo in a xen VM
Tomas Mozes tomas.mo...@shmu.sk writes: On 2014-12-04 11:08, lee wrote: Tomas Mozes tomas.mo...@shmu.sk writes: On 2014-12-04 02:14, lee wrote: Hi, I'd like to give Gentoo a try and want to install it in a xen VM. The server is otherwise running Debian. What would be the best way to do this? Either you can run a virtual machine using paravirtualization (PV) or full virtualization (HVM). If you want to use PV, then you create a partition for Gentoo, chroot, unpack stage3 and prepare your system for booting (follow the handbook). Then you create a configuration for your xen domU (Gentoo), provide a kernel and start it. You don't need the install-cd in this situation, nor any bootloader. That's like what I thought I should do :) I'd like to use PV as it has some advantages. How do I provide a kernel? Is it contained in the stage3 archive? And no bootloader? How do I make the VM bootable then? All the guests are PV and use something called phygrub of which I don't know where it comes from. This installation process with xen is some sort of mystery to me. With Debian, I used a somehow specially prepared kernel which booted the Debian installer. From there, the installation was the same as installing on bare metal. The kernel is not in stage3, you have to compile it yourself (or download from somewhere). When you have the kernel image binary, the xen configuration for the host can be simple as: Compile it with what? Are the sources in stage3, or downloaded so that I can compile a suitable Gentoo kernel within the chroot? name = gentoobox kernel = /xen/_kernel/kernel-3.14.23-gentoo-xen extra = root=/dev/xvda1 net.ifnames=0 memory = 2500 vcpus = 4 vif = [ '' ] disk = [ '/dev/vg_data/gentoo-t1_root,raw,xvda1,rw' ] 'raw'? I'll have to look up what that does. You can read about PV: http://wiki.xenproject.org/wiki/Paravirtualization_%28PV%29 If you prefer HVM, then you create a partition and use the install-cd to boot. After your install cd boots up, you partition your disk provided by xen dom0 (Debian), chroot, unpack stage3 and install the system along with the kernel and a bootloader. You can boot your Gentoo with pvgrub that will handle the booting to grub and it will load the kernel. This way, the Gentoo machine is like a black box for your Debian. I would recommend starting with HVM. Hm, I haven't used HVM yet. Can I change over to PV after the installation is done? What's the advantage of starting with HVM? The disk is an LVM volume and won't be partitioned. I've found it more reasonable to use a separate LVM volume for swap. I never installed Gentoo. I could start with my desktop since I want to replace Fedora anyway. That's a bit troublesome because I either have to plug in some disks for it which I'd need to buy first (I might get two small SSDs), or I'd have to repartition the existing ones. Hmmm. I think I'll try a VM with PV first. If that doesn't work, no harm is done and I can still ask when I'm stuck. Oh I almost forgot: Does the VM need internet access during the installation? The network setup is awfully complicated in this case. Well, you can copy the files to another place, but I have never done this transformation. HVM is like a black box, you start like booting a normal machine. For production, I always use PV, but for starters, HVM is also fine. So you cannot easily change from HVM to PV? Yes, you will need internet access because we compile everything as it goes, so you need to download the source files. Or, maybe you can download a livedvd, but I've never tried that. Why is the networking complicated? Do you use bridging? Yes --- and it was terrible to begin with and still is very complicated. One of the VMs has a network card passed through to do pppoe for the internet connection, and it also does routing and firewalling. The Gentoo VM is supposed to have another network card passed through because I want a separate network for miscellaneous devices like IP phones and printers. Asterisk is going to run on the Gentoo VM. Besides devices, there's the usual net, dmz and loc zones. To top it off, sooner or later I want to pass another network card to the firewall/router because I have an internet connection which is currently not in use and should be employed as an automatic fallback. -- Again we must be afraid of speaking of daemons for fear that daemons might swallow us. Finally, this fear has become reasonable.
Re: [gentoo-user] installing Gentoo in a xen VM
On Thu, Dec 4, 2014 at 1:11 PM, lee l...@yagibdah.de wrote: Tomas Mozes tomas.mo...@shmu.sk writes: The kernel is not in stage3, you have to compile it yourself (or download from somewhere). When you have the kernel image binary, the xen configuration for the host can be simple as: Compile it with what? Are the sources in stage3, or downloaded so that I can compile a suitable Gentoo kernel within the chroot? If you've never installed Gentoo anywhere I wouldn't suggest doing it for the first time under Xen. Gentoo stage3s include neither a binary kernel nor the sources. See: https://www.gentoo.org/doc/en/handbook/handbook-amd64.xml?part=1chap=7 -- Rich
Re: [gentoo-user] installing Gentoo in a xen VM
Rich Freeman ri...@gentoo.org writes: On Thu, Dec 4, 2014 at 5:09 AM, lee l...@yagibdah.de wrote: Vladimir Romanov bluebo...@gmail.com writes: Well, what's the problem? When i do this, then i just install debian, xen kernel, then create some config, download gentoo install cd, run it, and follow the handbook. How do you run the installer CD in a PV VM? It's not like you could just boot it, or can you? Correct. I don't believe our install CDs are xen-enabled. You would need to boot from another environment, or install the files from outside of the xen environment. When I'm installing Gentoo on ec2 now I typically just boot any convenient EMI, mount an EBS image, extract a stage3, then install/configure a xen-enabled kernel. ec2? emi? ebs? I haven't done an EC2 install in a while but I do have a .config that used to work lying around. I believe most of the instructions are on my blog as well - probably one of the more visited pages as it is probably helpful for getting any distro working on EC2/Xen. -- Rich -- Again we must be afraid of speaking of daemons for fear that daemons might swallow us. Finally, this fear has become reasonable.
Re: [gentoo-user] installing Gentoo in a xen VM
Rich Freeman ri...@gentoo.org writes: On Thu, Dec 4, 2014 at 1:11 PM, lee l...@yagibdah.de wrote: Tomas Mozes tomas.mo...@shmu.sk writes: The kernel is not in stage3, you have to compile it yourself (or download from somewhere). When you have the kernel image binary, the xen configuration for the host can be simple as: Compile it with what? Are the sources in stage3, or downloaded so that I can compile a suitable Gentoo kernel within the chroot? If you've never installed Gentoo anywhere I wouldn't suggest doing it for the first time under Xen. Gentoo stage3s include neither a binary kernel nor the sources. See: https://www.gentoo.org/doc/en/handbook/handbook-amd64.xml?part=1chap=7 That's confusing ... I would think that I can create the file system on the LV and extract the stage3 archive, then chroot into it. From there, I'd have to 'emerge gentoo-sources' and to compile a kernel. Isn't that easier or the same as booting on bare metal into some life system and doing these things from there? -- Again we must be afraid of speaking of daemons for fear that daemons might swallow us. Finally, this fear has become reasonable.
Re: [gentoo-user] installing Gentoo in a xen VM
On Thu, Dec 4, 2014 at 3:39 PM, lee l...@yagibdah.de wrote: Rich Freeman ri...@gentoo.org writes: On Thu, Dec 4, 2014 at 1:11 PM, lee l...@yagibdah.de wrote: Tomas Mozes tomas.mo...@shmu.sk writes: The kernel is not in stage3, you have to compile it yourself (or download from somewhere). When you have the kernel image binary, the xen configuration for the host can be simple as: Compile it with what? Are the sources in stage3, or downloaded so that I can compile a suitable Gentoo kernel within the chroot? If you've never installed Gentoo anywhere I wouldn't suggest doing it for the first time under Xen. Gentoo stage3s include neither a binary kernel nor the sources. See: https://www.gentoo.org/doc/en/handbook/handbook-amd64.xml?part=1chap=7 That's confusing ... I would think that I can create the file system on the LV and extract the stage3 archive, then chroot into it. From there, I'd have to 'emerge gentoo-sources' and to compile a kernel. Isn't that easier or the same as booting on bare metal into some life system and doing these things from there? When you boot a CD on bare metal all you're doing is creating the file system, extracting the archive, and chrooting into it. So the outcome is the same either way. If your xen guest is going to run on a regular LV you certainly can just mount it on the host and chroot into it. That is exactly how I'd go about it. Once you're in the chroot then you should install the kernel/etc per the handbook. Of course, you have to make sure that the config for the kernel supports running as a guest under xen. -- Rich
Re: [gentoo-user] installing Gentoo in a xen VM
On Thu, Dec 4, 2014 at 3:30 PM, lee l...@yagibdah.de wrote: Rich Freeman ri...@gentoo.org writes: On Thu, Dec 4, 2014 at 5:09 AM, lee l...@yagibdah.de wrote: Vladimir Romanov bluebo...@gmail.com writes: Well, what's the problem? When i do this, then i just install debian, xen kernel, then create some config, download gentoo install cd, run it, and follow the handbook. How do you run the installer CD in a PV VM? It's not like you could just boot it, or can you? Correct. I don't believe our install CDs are xen-enabled. You would need to boot from another environment, or install the files from outside of the xen environment. When I'm installing Gentoo on ec2 now I typically just boot any convenient EMI, mount an EBS image, extract a stage3, then install/configure a xen-enabled kernel. ec2? emi? ebs? EC2 is the brand name for Amazon's hosted cloud servers. I meant AMI and not EMI which is an amazon machine image, and EBS is elastic block storage, which is basically Amazon's equivalent of a logical volume. I mentioned it only because Amazon EC2 is based on Xen, so the process for getting EC2 working with a custom kernel is almost the same as what you're trying to do, other than the amazon-specific stuff like using their APIs to actually create/mount/snapshot volumes and all that. -- Rich
Re: [gentoo-user] installing Gentoo in a xen VM
Rich Freeman ri...@gentoo.org writes: On Thu, Dec 4, 2014 at 3:39 PM, lee l...@yagibdah.de wrote: Rich Freeman ri...@gentoo.org writes: On Thu, Dec 4, 2014 at 1:11 PM, lee l...@yagibdah.de wrote: Tomas Mozes tomas.mo...@shmu.sk writes: The kernel is not in stage3, you have to compile it yourself (or download from somewhere). When you have the kernel image binary, the xen configuration for the host can be simple as: Compile it with what? Are the sources in stage3, or downloaded so that I can compile a suitable Gentoo kernel within the chroot? If you've never installed Gentoo anywhere I wouldn't suggest doing it for the first time under Xen. Gentoo stage3s include neither a binary kernel nor the sources. See: https://www.gentoo.org/doc/en/handbook/handbook-amd64.xml?part=1chap=7 That's confusing ... I would think that I can create the file system on the LV and extract the stage3 archive, then chroot into it. From there, I'd have to 'emerge gentoo-sources' and to compile a kernel. Isn't that easier or the same as booting on bare metal into some life system and doing these things from there? When you boot a CD on bare metal all you're doing is creating the file system, extracting the archive, and chrooting into it. So the outcome is the same either way. If your xen guest is going to run on a regular LV you certainly can just mount it on the host and chroot into it. That is exactly how I'd go about it. Yes, I've already created a LV for it (along with others I'm going to need). Then I got stuck because I wanted to create an xfs file system and found that I hadn't installed a package required for that and couldn't install it because there was some problem with downloading package lists which they only fixed some time later ... BTW, can I use xfs for the VM, or will it be difficult to get the VM booted from xfs? Once you're in the chroot then you should install the kernel/etc per the handbook. So there isn't really an advantage to use HVM ... it's even easier because I can access the LV from dom0. Of course, you have to make sure that the config for the kernel supports running as a guest under xen. It's been a few years since the last time I compiled a kernel. I'm looking forward to it :) -- Again we must be afraid of speaking of daemons for fear that daemons might swallow us. Finally, this fear has become reasonable.
[gentoo-user] installing Gentoo in a xen VM
Hi, I'd like to give Gentoo a try and want to install it in a xen VM. The server is otherwise running Debian. What would be the best way to do this? -- Again we must be afraid of speaking of daemons for fear that daemons might swallow us. Finally, this fear has become reasonable.
Re: [gentoo-user] installing Gentoo in a xen VM
Well, what's the problem? When i do this, then i just install debian, xen kernel, then create some config, download gentoo install cd, run it, and follow the handbook. 2014-12-04 6:14 GMT+05:00 lee l...@yagibdah.de: Hi, I'd like to give Gentoo a try and want to install it in a xen VM. The server is otherwise running Debian. What would be the best way to do this? -- Again we must be afraid of speaking of daemons for fear that daemons might swallow us. Finally, this fear has become reasonable.
Re: [gentoo-user] installing Gentoo in a xen VM
On 2014-12-04 02:14, lee wrote: Hi, I'd like to give Gentoo a try and want to install it in a xen VM. The server is otherwise running Debian. What would be the best way to do this? Either you can run a virtual machine using paravirtualization (PV) or full virtualization (HVM). If you want to use PV, then you create a partition for Gentoo, chroot, unpack stage3 and prepare your system for booting (follow the handbook). Then you create a configuration for your xen domU (Gentoo), provide a kernel and start it. You don't need the install-cd in this situation, nor any bootloader. If you prefer HVM, then you create a partition and use the install-cd to boot. After your install cd boots up, you partition your disk provided by xen dom0 (Debian), chroot, unpack stage3 and install the system along with the kernel and a bootloader. You can boot your Gentoo with pvgrub that will handle the booting to grub and it will load the kernel. This way, the Gentoo machine is like a black box for your Debian. I would recommend starting with HVM.
