Re: [gentoo-user] problems, with, 'hibernate, to, disk', two, nvidia, cards, installed
Paul Hartman paul.hartman+gen...@gmail.com [12-01-04 02:29]: On Tue, Jan 3, 2012 at 6:01 PM, Mick michaelkintz...@gmail.com wrote: I'm not sure if this is related, but here it goes: Unllike you, I'm running a (single) ATI card in a laptop and have just compiled and installed the 3.1.6-gentoo kernel. Like you, when I tried to hibernate the screen but dark, but it never actually completes the hibernation. Similarly with suspend to RAM I cannot recover from it and I have to power cycle it. I have not had such a problem with this laptop since I bought it two years ago. All I'm thinking of blaming is the new 3.1.6 kernel. Linux kernel 3.1.7 was just released with a fix for some kind of suspend/resume problem. Maybe it's related? Any hope to get this working again? Best regards, mcc
Re: [gentoo-user] problems, with, 'hibernate, to, disk', two, nvidia, cards, installed
On Wednesday 04 Jan 2012 06:31:45 meino.cra...@gmx.de wrote: Walter Dnes waltd...@waltdnes.org [12-01-04 06:25]: On Wed, Jan 04, 2012 at 03:03:49AM +0100, meino.cra...@gmx.de wrote ...I tried linux kernel 3.1.7 and it does not fix the problem. The situation remains the samesigh What can I addtionaly check ? An excerpt from the hibernate.conf man page... === Verbosity N Determines how verbose the output from the suspend script should be: 0: silent except for errors 1: print steps 2: print steps in detail 3: print steps in lots of detail 4: print out every command executed (uses -x) LogFile filename If specified, output from the suspend script will also be redirected to this file - useful for debugging purposes. === Add the 2 lines... Verbosity 4 LogFile /root/hibernate.log It is LogVerbosity 4 and the configuration file is /etc/hibernate/common.conf (just for those reading this thread later) ...to /etc/hibernate.conf and attempt to suspend. If it doesn't power off, do *NOT* use the power switch. Either reboot with {CTRL}{ALT}{DEL} or else use the Magic SysReq Key, if you have it enabled. Once you restart, take a look at the logfile to see where it dies. If you can't figure it out, gzip the logfile and attach it to a posting here, and we'll try to figure it out. CTRL-ALT-DEL does not work here. Sysrq does not work either. May be this is because the usb-module gets unloaded before (just a shot in the dark)? I had to power off again. I dont know, whether the log entries are valid under this conditions, but here they are: Starting suspend at Wed Jan 4 06:35:36 CET 2012 Jan 4 06:35:36.67 hibernate: [01] Executing CheckLastResume ... Jan 4 06:35:36.68 hibernate: [01] Executing CheckRunlevel ... Jan 4 06:35:36.69 hibernate: [01] Executing LockFileGet ... Jan 4 06:35:36.70 hibernate: [01] Executing NewKernelFileCheck ... Jan 4 06:35:36.71 hibernate: [10] Executing EnsureSysfsPowerStateCapable ... Jan 4 06:35:36.72 hibernate: [11] Executing XHacksSuspendHook1 ... Jan 4 06:35:36.73 hibernate: [19] Executing DevicesFree ... Jan 4 06:35:43.53 hibernate: [30] Executing ServicesStop ... Jan 4 06:35:43.54 Executing /etc/init.d/alsasound stop * Storing ALSA Mixer Levels ... [ ok ] Jan 4 06:35:43.64 hibernate: [45] Executing FSTypesUnmount ... Jan 4 06:35:43.66 hibernate: [59] Executing RemountXFSBootRO ... Jan 4 06:35:43.67 hibernate: [89] Executing SaveKernelModprobe ... Jan 4 06:35:43.68 Saved /proc/sys/kernel/modprobe is /sbin/modprobe Jan 4 06:35:43.69 hibernate: [90] Executing ModulesUnload ... Jan 4 06:35:43.70 -n Unloading module snd_via82cxxx... Jan 4 06:35:43.70 not loaded. Jan 4 06:35:43.71 -n Unloading module usb-ohci... Jan 4 06:35:43.71 not loaded. Jan 4 06:35:43.72 -n Unloading module snd_via82cxxx... Jan 4 06:35:43.72 not loaded. Jan 4 06:35:43.73 -n Unloading module usb-ohci... Jan 4 06:35:43.74 not loaded. Jan 4 06:35:43.74 hibernate: [91] Executing ModulesUnloadBlacklist ... Jan 4 06:35:43.75 Unloading blacklisted modules listed /etc/hibernate/blacklisted-modules Jan 4 06:35:43.89 Module version for ipw2100 is Jan 4 06:35:43.91 Module version for ipw2200 is Jan 4 06:35:44.08 Module version for snd_bt_sco is Jan 4 06:35:44.21 Module version for ndiswrapper is Jan 4 06:35:44.33 hibernate: [91] Executing ModulesUnloadBlacklist ... Jan 4 06:35:44.34 Unloading blacklisted modules listed /etc/hibernate/blacklisted-modules Jan 4 06:35:44.45 Module version for ipw2100 is Jan 4 06:35:44.47 Module version for ipw2200 is Jan 4 06:35:44.64 Module version for snd_bt_sco is Jan 4 06:35:44.77 Module version for ndiswrapper is Jan 4 06:35:44.90 hibernate: [95] Executing XHacksSuspendHook2 ... Jan 4 06:35:44.92 xhacks: changing console from 7 to 15 Jan 4 06:35:46.65 hibernate: [98] Executing CheckRunlevel ... Jan 4 06:35:46.66 hibernate: [98] Executing FullSpeedCPUSuspend ... Jan 4 06:35:46.69 Switched to performance, with min freq at 360 Jan 4 06:35:46.71 Switched to performance, with min freq at 360 Jan 4 06:35:46.73 Switched to performance, with min freq at 360 Jan 4 06:35:46.74 Switched to performance, with min freq at 360 Jan 4 06:35:46.75 Switched to performance, with min freq at 360 Jan 4 06:35:46.76 Switched to performance, with min freq at 360 Jan 4 06:35:46.76 hibernate: [99] Executing DoSysfsPowerStateSuspend ... Jan 4 06:35:46.76 hibernate: Activating sysfs power state disk ... I haven't yet tried anything else, but diff'ing the 3.0.6 and 3.1.6 gentoo kernels .config files, these are the modules that stand out in the new kernel: CONFIG_ARCH_CLOCKSOURCE_DATA=y CONFIG_HAVE_PCSPKR_PLATFORM=y
Re: [gentoo-user] problems, with, 'hibernate, to, disk', two, nvidia, cards, installed
Mick michaelkintz...@gmail.com [12-01-04 14:22]: On Wednesday 04 Jan 2012 06:31:45 meino.cra...@gmx.de wrote: Walter Dnes waltd...@waltdnes.org [12-01-04 06:25]: On Wed, Jan 04, 2012 at 03:03:49AM +0100, meino.cra...@gmx.de wrote ...I tried linux kernel 3.1.7 and it does not fix the problem. The situation remains the samesigh What can I addtionaly check ? An excerpt from the hibernate.conf man page... === Verbosity N Determines how verbose the output from the suspend script should be: 0: silent except for errors 1: print steps 2: print steps in detail 3: print steps in lots of detail 4: print out every command executed (uses -x) LogFile filename If specified, output from the suspend script will also be redirected to this file - useful for debugging purposes. === Add the 2 lines... Verbosity 4 LogFile /root/hibernate.log It is LogVerbosity 4 and the configuration file is /etc/hibernate/common.conf (just for those reading this thread later) ...to /etc/hibernate.conf and attempt to suspend. If it doesn't power off, do *NOT* use the power switch. Either reboot with {CTRL}{ALT}{DEL} or else use the Magic SysReq Key, if you have it enabled. Once you restart, take a look at the logfile to see where it dies. If you can't figure it out, gzip the logfile and attach it to a posting here, and we'll try to figure it out. CTRL-ALT-DEL does not work here. Sysrq does not work either. May be this is because the usb-module gets unloaded before (just a shot in the dark)? I had to power off again. I dont know, whether the log entries are valid under this conditions, but here they are: Starting suspend at Wed Jan 4 06:35:36 CET 2012 Jan 4 06:35:36.67 hibernate: [01] Executing CheckLastResume ... Jan 4 06:35:36.68 hibernate: [01] Executing CheckRunlevel ... Jan 4 06:35:36.69 hibernate: [01] Executing LockFileGet ... Jan 4 06:35:36.70 hibernate: [01] Executing NewKernelFileCheck ... Jan 4 06:35:36.71 hibernate: [10] Executing EnsureSysfsPowerStateCapable ... Jan 4 06:35:36.72 hibernate: [11] Executing XHacksSuspendHook1 ... Jan 4 06:35:36.73 hibernate: [19] Executing DevicesFree ... Jan 4 06:35:43.53 hibernate: [30] Executing ServicesStop ... Jan 4 06:35:43.54 Executing /etc/init.d/alsasound stop * Storing ALSA Mixer Levels ... [ ok ] Jan 4 06:35:43.64 hibernate: [45] Executing FSTypesUnmount ... Jan 4 06:35:43.66 hibernate: [59] Executing RemountXFSBootRO ... Jan 4 06:35:43.67 hibernate: [89] Executing SaveKernelModprobe ... Jan 4 06:35:43.68 Saved /proc/sys/kernel/modprobe is /sbin/modprobe Jan 4 06:35:43.69 hibernate: [90] Executing ModulesUnload ... Jan 4 06:35:43.70 -n Unloading module snd_via82cxxx... Jan 4 06:35:43.70 not loaded. Jan 4 06:35:43.71 -n Unloading module usb-ohci... Jan 4 06:35:43.71 not loaded. Jan 4 06:35:43.72 -n Unloading module snd_via82cxxx... Jan 4 06:35:43.72 not loaded. Jan 4 06:35:43.73 -n Unloading module usb-ohci... Jan 4 06:35:43.74 not loaded. Jan 4 06:35:43.74 hibernate: [91] Executing ModulesUnloadBlacklist ... Jan 4 06:35:43.75 Unloading blacklisted modules listed /etc/hibernate/blacklisted-modules Jan 4 06:35:43.89 Module version for ipw2100 is Jan 4 06:35:43.91 Module version for ipw2200 is Jan 4 06:35:44.08 Module version for snd_bt_sco is Jan 4 06:35:44.21 Module version for ndiswrapper is Jan 4 06:35:44.33 hibernate: [91] Executing ModulesUnloadBlacklist ... Jan 4 06:35:44.34 Unloading blacklisted modules listed /etc/hibernate/blacklisted-modules Jan 4 06:35:44.45 Module version for ipw2100 is Jan 4 06:35:44.47 Module version for ipw2200 is Jan 4 06:35:44.64 Module version for snd_bt_sco is Jan 4 06:35:44.77 Module version for ndiswrapper is Jan 4 06:35:44.90 hibernate: [95] Executing XHacksSuspendHook2 ... Jan 4 06:35:44.92 xhacks: changing console from 7 to 15 Jan 4 06:35:46.65 hibernate: [98] Executing CheckRunlevel ... Jan 4 06:35:46.66 hibernate: [98] Executing FullSpeedCPUSuspend ... Jan 4 06:35:46.69 Switched to performance, with min freq at 360 Jan 4 06:35:46.71 Switched to performance, with min freq at 360 Jan 4 06:35:46.73 Switched to performance, with min freq at 360 Jan 4 06:35:46.74 Switched to performance, with min freq at 360 Jan 4 06:35:46.75 Switched to performance, with min freq at 360 Jan 4 06:35:46.76 Switched to performance, with min freq at 360 Jan 4 06:35:46.76 hibernate: [99] Executing DoSysfsPowerStateSuspend ... Jan 4 06:35:46.76 hibernate: Activating sysfs power state disk ... I haven't yet tried anything else, but diff'ing the 3.0.6
Re: [gentoo-user] problems, with, 'hibernate, to, disk', two, nvidia, cards, installed
On Wednesday 04 Jan 2012 13:23:20 meino.cra...@gmx.de wrote: Mick michaelkintz...@gmail.com [12-01-04 14:22]: On Wednesday 04 Jan 2012 06:31:45 meino.cra...@gmx.de wrote: Walter Dnes waltd...@waltdnes.org [12-01-04 06:25]: On Wed, Jan 04, 2012 at 03:03:49AM +0100, meino.cra...@gmx.de wrote ...I tried linux kernel 3.1.7 and it does not fix the problem. The situation remains the samesigh What can I addtionaly check ? An excerpt from the hibernate.conf man page... === Verbosity N Determines how verbose the output from the suspend script should be: 0: silent except for errors 1: print steps 2: print steps in detail 3: print steps in lots of detail 4: print out every command executed (uses -x) LogFile filename If specified, output from the suspend script will also be redirected to this file - useful for debugging purposes. === Add the 2 lines... Verbosity 4 LogFile /root/hibernate.log It is LogVerbosity 4 and the configuration file is /etc/hibernate/common.conf (just for those reading this thread later) ...to /etc/hibernate.conf and attempt to suspend. If it doesn't power off, do *NOT* use the power switch. Either reboot with {CTRL}{ALT}{DEL} or else use the Magic SysReq Key, if you have it enabled. Once you restart, take a look at the logfile to see where it dies. If you can't figure it out, gzip the logfile and attach it to a posting here, and we'll try to figure it out. CTRL-ALT-DEL does not work here. Sysrq does not work either. May be this is because the usb-module gets unloaded before (just a shot in the dark)? I had to power off again. I dont know, whether the log entries are valid under this conditions, but here they are: Starting suspend at Wed Jan 4 06:35:36 CET 2012 Jan 4 06:35:36.67 hibernate: [01] Executing CheckLastResume ... Jan 4 06:35:36.68 hibernate: [01] Executing CheckRunlevel ... Jan 4 06:35:36.69 hibernate: [01] Executing LockFileGet ... Jan 4 06:35:36.70 hibernate: [01] Executing NewKernelFileCheck ... Jan 4 06:35:36.71 hibernate: [10] Executing EnsureSysfsPowerStateCapable ... Jan 4 06:35:36.72 hibernate: [11] Executing XHacksSuspendHook1 ... Jan 4 06:35:36.73 hibernate: [19] Executing DevicesFree ... Jan 4 06:35:43.53 hibernate: [30] Executing ServicesStop ... Jan 4 06:35:43.54 Executing /etc/init.d/alsasound stop * Storing ALSA Mixer Levels ... [ ok ] Jan 4 06:35:43.64 hibernate: [45] Executing FSTypesUnmount ... Jan 4 06:35:43.66 hibernate: [59] Executing RemountXFSBootRO ... Jan 4 06:35:43.67 hibernate: [89] Executing SaveKernelModprobe ... Jan 4 06:35:43.68 Saved /proc/sys/kernel/modprobe is /sbin/modprobe Jan 4 06:35:43.69 hibernate: [90] Executing ModulesUnload ... Jan 4 06:35:43.70 -n Unloading module snd_via82cxxx... Jan 4 06:35:43.70 not loaded. Jan 4 06:35:43.71 -n Unloading module usb-ohci... Jan 4 06:35:43.71 not loaded. Jan 4 06:35:43.72 -n Unloading module snd_via82cxxx... Jan 4 06:35:43.72 not loaded. Jan 4 06:35:43.73 -n Unloading module usb-ohci... Jan 4 06:35:43.74 not loaded. Jan 4 06:35:43.74 hibernate: [91] Executing ModulesUnloadBlacklist ... Jan 4 06:35:43.75 Unloading blacklisted modules listed /etc/hibernate/blacklisted-modules Jan 4 06:35:43.89 Module version for ipw2100 is Jan 4 06:35:43.91 Module version for ipw2200 is Jan 4 06:35:44.08 Module version for snd_bt_sco is Jan 4 06:35:44.21 Module version for ndiswrapper is Jan 4 06:35:44.33 hibernate: [91] Executing ModulesUnloadBlacklist ... Jan 4 06:35:44.34 Unloading blacklisted modules listed /etc/hibernate/blacklisted-modules Jan 4 06:35:44.45 Module version for ipw2100 is Jan 4 06:35:44.47 Module version for ipw2200 is Jan 4 06:35:44.64 Module version for snd_bt_sco is Jan 4 06:35:44.77 Module version for ndiswrapper is Jan 4 06:35:44.90 hibernate: [95] Executing XHacksSuspendHook2 ... Jan 4 06:35:44.92 xhacks: changing console from 7 to 15 Jan 4 06:35:46.65 hibernate: [98] Executing CheckRunlevel ... Jan 4 06:35:46.66 hibernate: [98] Executing FullSpeedCPUSuspend ... Jan 4 06:35:46.69 Switched to performance, with min freq at 360 Jan 4 06:35:46.71 Switched to performance, with min freq at 360 Jan 4 06:35:46.73 Switched to performance, with min freq at 360 Jan 4 06:35:46.74 Switched to performance, with min freq at 360 Jan 4 06:35:46.75 Switched to performance, with min freq at 360 Jan 4 06:35:46.76 Switched to performance, with min freq at 360 Jan 4 06:35:46.76
[gentoo-user] problems, with, 'hibernate, to, disk', two, nvidia, cards, installed
Hi, My gentoo box runs with linux kernel 3.1.6 (vanilla). The hardware consists of an Asus Crosshair Formula IV motherboard, a AMD Phenom II X6 1090T Processor and two nviida cards: 02:00.0 VGA compatible controller: nVidia Corporation GF110 [GeForce GTX 560 Ti] (rev a1) 09:00.0 VGA compatible controller: nVidia Corporation GF108 [GeForce GT 430] (rev a1) Previously I had installed the GT 430 card only. With this card, hibernation to disk using sys-power/hibernate-script was no problem. Then I removed the GT 430 and uses a GTX 560 Ti for better performance when rendering while utilzing the GPU. With this card the same hibernation was no problem also. Then on the Blender forum one came up with the idea to install both cards. The GT 430 is used for desktop purposes then, the GTX 560 Ti was used for rendering only. With this setup hibernation is not possible anymore. Whe starting the hibernation, the screen wents dark, but the PC does not power off. I had to push the power button finally and the reboot afterwards wents through the normal process like after any normal shutdown...with the exception, that the journals of the partitions had to be fixed. /var/log/hibernate.log shows the following of the failed hibernation and the boot afterwards: Starting suspend at Tue Jan 3 21:48:58 CET 2012 hibernate: [01] Executing CheckLastResume ... hibernate: [01] Executing CheckRunlevel ... hibernate: [01] Executing LockFileGet ... hibernate: [01] Executing NewKernelFileCheck ... hibernate: [10] Executing EnsureSysfsPowerStateCapable ... hibernate: [11] Executing XHacksSuspendHook1 ... hibernate: [19] Executing DevicesFree ... hibernate: [30] Executing ServicesStop ... * Storing ALSA Mixer Levels ... [ ok ] hibernate: [45] Executing FSTypesUnmount ... hibernate: [59] Executing RemountXFSBootRO ... hibernate: [89] Executing SaveKernelModprobe ... hibernate: [90] Executing ModulesUnload ... hibernate: [91] Executing ModulesUnloadBlacklist ... hibernate: [91] Executing ModulesUnloadBlacklist ... hibernate: [95] Executing XHacksSuspendHook2 ... hibernate: [98] Executing CheckRunlevel ... hibernate: [98] Executing FullSpeedCPUSuspend ... hibernate: [99] Executing DoSysfsPowerStateSuspend ... hibernate: Activating sysfs power state disk ... I tried to blacklist the nvidia drivers (290.10), but the hibernation couldn't unload this driver. How can I get back the hibernation functionality? Thank you very much in advance for any help ! Best regards, mcc
Re: [gentoo-user] problems, with, 'hibernate, to, disk', two, nvidia, cards, installed
On 3 January 2012 21:10, meino.cra...@gmx.de wrote: Hi, My gentoo box runs with linux kernel 3.1.6 (vanilla). The hardware consists of an Asus Crosshair Formula IV motherboard, a AMD Phenom II X6 1090T Processor and two nviida cards: 02:00.0 VGA compatible controller: nVidia Corporation GF110 [GeForce GTX 560 Ti] (rev a1) 09:00.0 VGA compatible controller: nVidia Corporation GF108 [GeForce GT 430] (rev a1) Previously I had installed the GT 430 card only. With this card, hibernation to disk using sys-power/hibernate-script was no problem. Then I removed the GT 430 and uses a GTX 560 Ti for better performance when rendering while utilzing the GPU. With this card the same hibernation was no problem also. Then on the Blender forum one came up with the idea to install both cards. The GT 430 is used for desktop purposes then, the GTX 560 Ti was used for rendering only. With this setup hibernation is not possible anymore. Whe starting the hibernation, the screen wents dark, but the PC does not power off. I had to push the power button finally and the reboot afterwards wents through the normal process like after any normal shutdown...with the exception, that the journals of the partitions had to be fixed. /var/log/hibernate.log shows the following of the failed hibernation and the boot afterwards: Starting suspend at Tue Jan 3 21:48:58 CET 2012 hibernate: [01] Executing CheckLastResume ... hibernate: [01] Executing CheckRunlevel ... hibernate: [01] Executing LockFileGet ... hibernate: [01] Executing NewKernelFileCheck ... hibernate: [10] Executing EnsureSysfsPowerStateCapable ... hibernate: [11] Executing XHacksSuspendHook1 ... hibernate: [19] Executing DevicesFree ... hibernate: [30] Executing ServicesStop ... * Storing ALSA Mixer Levels ... [ ok ] hibernate: [45] Executing FSTypesUnmount ... hibernate: [59] Executing RemountXFSBootRO ... hibernate: [89] Executing SaveKernelModprobe ... hibernate: [90] Executing ModulesUnload ... hibernate: [91] Executing ModulesUnloadBlacklist ... hibernate: [91] Executing ModulesUnloadBlacklist ... hibernate: [95] Executing XHacksSuspendHook2 ... hibernate: [98] Executing CheckRunlevel ... hibernate: [98] Executing FullSpeedCPUSuspend ... hibernate: [99] Executing DoSysfsPowerStateSuspend ... hibernate: Activating sysfs power state disk ... I tried to blacklist the nvidia drivers (290.10), but the hibernation couldn't unload this driver. How can I get back the hibernation functionality? Thank you very much in advance for any help ! I'm not sure if this is related, but here it goes: Unllike you, I'm running a (single) ATI card in a laptop and have just compiled and installed the 3.1.6-gentoo kernel. Like you, when I tried to hibernate the screen but dark, but it never actually completes the hibernation. Similarly with suspend to RAM I cannot recover from it and I have to power cycle it. I have not had such a problem with this laptop since I bought it two years ago. All I'm thinking of blaming is the new 3.1.6 kernel. -- Regards, Mick
Re: [gentoo-user] problems, with, 'hibernate, to, disk', two, nvidia, cards, installed
On Tue, Jan 3, 2012 at 6:01 PM, Mick michaelkintz...@gmail.com wrote: I'm not sure if this is related, but here it goes: Unllike you, I'm running a (single) ATI card in a laptop and have just compiled and installed the 3.1.6-gentoo kernel. Like you, when I tried to hibernate the screen but dark, but it never actually completes the hibernation. Similarly with suspend to RAM I cannot recover from it and I have to power cycle it. I have not had such a problem with this laptop since I bought it two years ago. All I'm thinking of blaming is the new 3.1.6 kernel. Linux kernel 3.1.7 was just released with a fix for some kind of suspend/resume problem. Maybe it's related?
Re: [gentoo-user] problems, with, 'hibernate, to, disk', two, nvidia, cards, installed
Paul Hartman paul.hartman+gen...@gmail.com [12-01-04 02:29]: On Tue, Jan 3, 2012 at 6:01 PM, Mick michaelkintz...@gmail.com wrote: I'm not sure if this is related, but here it goes: Unllike you, I'm running a (single) ATI card in a laptop and have just compiled and installed the 3.1.6-gentoo kernel. Like you, when I tried to hibernate the screen but dark, but it never actually completes the hibernation. Similarly with suspend to RAM I cannot recover from it and I have to power cycle it. I have not had such a problem with this laptop since I bought it two years ago. All I'm thinking of blaming is the new 3.1.6 kernel. Linux kernel 3.1.7 was just released with a fix for some kind of suspend/resume problem. Maybe it's related? Hi, thank you for your replies! ...I tried linux kernel 3.1.7 and it does not fix the problem. The situation remains the samesigh What can I addtionaly check ? Best regards, mcc
Re: [gentoo-user] problems, with, 'hibernate, to, disk', two, nvidia, cards, installed
Just for completeness sake, try downgrading the kernel to 3.1.5 or lower.
Re: [gentoo-user] problems, with, 'hibernate, to, disk', two, nvidia, cards, installed
On Wed, Jan 04, 2012 at 03:03:49AM +0100, meino.cra...@gmx.de wrote ...I tried linux kernel 3.1.7 and it does not fix the problem. The situation remains the samesigh What can I addtionaly check ? An excerpt from the hibernate.conf man page... === Verbosity N Determines how verbose the output from the suspend script should be: 0: silent except for errors 1: print steps 2: print steps in detail 3: print steps in lots of detail 4: print out every command executed (uses -x) LogFile filename If specified, output from the suspend script will also be redirected to this file - useful for debugging purposes. === Add the 2 lines... Verbosity 4 LogFile /root/hibernate.log ...to /etc/hibernate.conf and attempt to suspend. If it doesn't power off, do *NOT* use the power switch. Either reboot with {CTRL}{ALT}{DEL} or else use the Magic SysReq Key, if you have it enabled. Once you restart, take a look at the logfile to see where it dies. If you can't figure it out, gzip the logfile and attach it to a posting here, and we'll try to figure it out. -- Walter Dnes waltd...@waltdnes.org
Re: [gentoo-user] problems, with, 'hibernate, to, disk', two, nvidia, cards, installed
Walter Dnes waltd...@waltdnes.org [12-01-04 06:25]: On Wed, Jan 04, 2012 at 03:03:49AM +0100, meino.cra...@gmx.de wrote ...I tried linux kernel 3.1.7 and it does not fix the problem. The situation remains the samesigh What can I addtionaly check ? An excerpt from the hibernate.conf man page... === Verbosity N Determines how verbose the output from the suspend script should be: 0: silent except for errors 1: print steps 2: print steps in detail 3: print steps in lots of detail 4: print out every command executed (uses -x) LogFile filename If specified, output from the suspend script will also be redirected to this file - useful for debugging purposes. === Add the 2 lines... Verbosity 4 LogFile /root/hibernate.log It is LogVerbosity 4 and the configuration file is /etc/hibernate/common.conf (just for those reading this thread later) ...to /etc/hibernate.conf and attempt to suspend. If it doesn't power off, do *NOT* use the power switch. Either reboot with {CTRL}{ALT}{DEL} or else use the Magic SysReq Key, if you have it enabled. Once you restart, take a look at the logfile to see where it dies. If you can't figure it out, gzip the logfile and attach it to a posting here, and we'll try to figure it out. CTRL-ALT-DEL does not work here. Sysrq does not work either. May be this is because the usb-module gets unloaded before (just a shot in the dark)? I had to power off again. I dont know, whether the log entries are valid under this conditions, but here they are: Starting suspend at Wed Jan 4 06:35:36 CET 2012 Jan 4 06:35:36.67 hibernate: [01] Executing CheckLastResume ... Jan 4 06:35:36.68 hibernate: [01] Executing CheckRunlevel ... Jan 4 06:35:36.69 hibernate: [01] Executing LockFileGet ... Jan 4 06:35:36.70 hibernate: [01] Executing NewKernelFileCheck ... Jan 4 06:35:36.71 hibernate: [10] Executing EnsureSysfsPowerStateCapable ... Jan 4 06:35:36.72 hibernate: [11] Executing XHacksSuspendHook1 ... Jan 4 06:35:36.73 hibernate: [19] Executing DevicesFree ... Jan 4 06:35:43.53 hibernate: [30] Executing ServicesStop ... Jan 4 06:35:43.54 Executing /etc/init.d/alsasound stop * Storing ALSA Mixer Levels ... [ ok ] Jan 4 06:35:43.64 hibernate: [45] Executing FSTypesUnmount ... Jan 4 06:35:43.66 hibernate: [59] Executing RemountXFSBootRO ... Jan 4 06:35:43.67 hibernate: [89] Executing SaveKernelModprobe ... Jan 4 06:35:43.68 Saved /proc/sys/kernel/modprobe is /sbin/modprobe Jan 4 06:35:43.69 hibernate: [90] Executing ModulesUnload ... Jan 4 06:35:43.70 -n Unloading module snd_via82cxxx... Jan 4 06:35:43.70 not loaded. Jan 4 06:35:43.71 -n Unloading module usb-ohci... Jan 4 06:35:43.71 not loaded. Jan 4 06:35:43.72 -n Unloading module snd_via82cxxx... Jan 4 06:35:43.72 not loaded. Jan 4 06:35:43.73 -n Unloading module usb-ohci... Jan 4 06:35:43.74 not loaded. Jan 4 06:35:43.74 hibernate: [91] Executing ModulesUnloadBlacklist ... Jan 4 06:35:43.75 Unloading blacklisted modules listed /etc/hibernate/blacklisted-modules Jan 4 06:35:43.89 Module version for ipw2100 is Jan 4 06:35:43.91 Module version for ipw2200 is Jan 4 06:35:44.08 Module version for snd_bt_sco is Jan 4 06:35:44.21 Module version for ndiswrapper is Jan 4 06:35:44.33 hibernate: [91] Executing ModulesUnloadBlacklist ... Jan 4 06:35:44.34 Unloading blacklisted modules listed /etc/hibernate/blacklisted-modules Jan 4 06:35:44.45 Module version for ipw2100 is Jan 4 06:35:44.47 Module version for ipw2200 is Jan 4 06:35:44.64 Module version for snd_bt_sco is Jan 4 06:35:44.77 Module version for ndiswrapper is Jan 4 06:35:44.90 hibernate: [95] Executing XHacksSuspendHook2 ... Jan 4 06:35:44.92 xhacks: changing console from 7 to 15 Jan 4 06:35:46.65 hibernate: [98] Executing CheckRunlevel ... Jan 4 06:35:46.66 hibernate: [98] Executing FullSpeedCPUSuspend ... Jan 4 06:35:46.69 Switched to performance, with min freq at 360 Jan 4 06:35:46.71 Switched to performance, with min freq at 360 Jan 4 06:35:46.73 Switched to performance, with min freq at 360 Jan 4 06:35:46.74 Switched to performance, with min freq at 360 Jan 4 06:35:46.75 Switched to performance, with min freq at 360 Jan 4 06:35:46.76 Switched to performance, with min freq at 360 Jan 4 06:35:46.76 hibernate: [99] Executing DoSysfsPowerStateSuspend ... Jan 4 06:35:46.76 hibernate: Activating sysfs power state disk ... -- Walter Dnes waltd...@waltdnes.org