Re: [gentoo-user] sys-libs/libstdc++-v3-3.3.6 dies!
i solved such bummer following the next procedure http://www.gentoo.org/doc/en/gcc-upgrading.xml hope you will too, good luck :) -- purple..
Re: [gentoo-user] sys-libs/libstdc++-v3-3.3.6 dies!
On Sat, 29 Dec 2007 23:54:44 +0100
Anders Trobäck [EMAIL PROTECTED] wrote:
Hi,
I'm trying to run 'emerge -uDN world' but it's dies on
sys-libs/libstdc++-v3-3.3.6.
Here are some info:
8--
make TARGETS=oneprocess SHELL=/bin/tcsh CC=gcc CFLAGS=
-march=prescott -O2 -pipe s -Wstrict-prototypes -Wmissing-prototypes
-Wtraditional -pedantic -Wno-long-long -DHA FLAGS=
LIBERTY=/var/tmp/portage/sys-libs/libstdc++-v3-3.3.6/work/build/gcc/../libib
make[2]: Entering directory
`/var/tmp/portage/sys-libs/libstdc++-v3-3.3.6/work/build/g /bin/tcsh
/var/tmp/portage/sys-libs/libstdc++-v3-3.3.6/work/gcc-3.3.6/gcc/fixinc/genfi
SHELL=/bin/sh: Command not found. export: Command not found.
if: Expression Syntax.
make[2]: *** [machname.h] Fel 1
make[2]: Leaving directory
`/var/tmp/portage/sys-libs/libstdc++-v3-3.3.6/work/build/gc make[1]:
*** [fixinc.sh] Fel 2 make[1]: *** Inväntar oavslutade jobb...
done
Forming and outputing automata tables...done
Output functions to work with automata...done
Automaton `pentium'
48 NDFA states, 90 NDFA arcs
48 DFA states, 90 DFA arcs
20 minimal DFA states, 62 minimal DFA arcs
29 all insns 16 insn equivalence classes
62 transition comb vector els, 320 trans table els: use comb vect
62 state alts comb vector els, 320 state alts table els: use comb
vect 768 min delay table els, compression factor 2
Automaton `pentium_fpu'
80 NDFA states,172 NDFA arcs
80 DFA states, 172 DFA arcs
75 minimal DFA states, 162 minimal DFA arcs
29 all insns 8 insn equivalence classes
164 transition comb vector els, 600 trans table els: use comb vect
164 state alts comb vector els, 600 state alts table els: use comb
vect 640 min delay table els, compression factor 1
237 all allocated states, 236 all allocated arcs
342 all allocated alternative states
226 all transition comb vector els, 920 all trans table els
226 all state alts comb vector els, 920 all state alts table els
1408 all min delay table els
12 locked states num
transformation: 0.004001, building DFA: 0.012000
DFA minimization: 0.00, making insn equivalence: 0.00
all automaton generation: 0.012000, output: 0.004000
/bin/sh
/var/tmp/portage/sys-libs/libstdc++-v3-3.3.6/work/gcc-3.3.6/gcc/move-if-change
echo timestamp s-attrtab
make[1]: Leaving directory
`/var/tmp/portage/sys-libs/libstdc++-v3-3.3.6/work/build/gc make: ***
[all-gcc] Fel 2
*
* ERROR: sys-libs/libstdc++-v3-3.3.6 failed.
* Call stack:
* ebuild.sh, line 1701: Called dyn_compile
* ebuild.sh, line 1039: Called qa_call
'src_compile'
* ebuild.sh, line 44: Called src_compile
* libstdc++-v3-3.3.6.ebuild, line 228: Called die
* The specific snippet of code:
* S=${WORKDIR}/build \
* emake all-target-libstdc++-v3 \
* LIBPATH=${LIBPATH} \
* BOOT_CFLAGS=${CFLAGS} STAGE1_CFLAGS=-O || die
* The die message:
* (no error message)
*
* If you need support, post the topmost build error, and the call
stack if relevant.
* A complete build log is located at
'/var/tmp/portage/sys-libs/libstdc++-v3-3.3.6/te
*
8--
Anyone have a clue?
Thanks!!!
Answer my self here:-)
Normally I'm a tcsh user so I changed root's default shell to tcsh.
After I change it back to bash everything builds just fine!
\\anders
--
[EMAIL PROTECTED] mailing list
Re: [gentoo-user] sys-libs/libstdc++-v3-3.3.6 dies!
On Mon, 31 Dec 2007 00:21:41 +0100
Anders Trobäck [EMAIL PROTECTED] wrote:
On Sat, 29 Dec 2007 23:54:44 +0100
Anders Trobäck [EMAIL PROTECTED] wrote:
Hi,
I'm trying to run 'emerge -uDN world' but it's dies on
sys-libs/libstdc++-v3-3.3.6.
Here are some info:
8--
make TARGETS=oneprocess SHELL=/bin/tcsh CC=gcc CFLAGS=
-march=prescott -O2 -pipe s -Wstrict-prototypes -Wmissing-prototypes
-Wtraditional -pedantic -Wno-long-long -DHA FLAGS=
LIBERTY=/var/tmp/portage/sys-libs/libstdc++-v3-3.3.6/work/build/gcc/../libib
make[2]: Entering directory
`/var/tmp/portage/sys-libs/libstdc++-v3-3.3.6/work/build/g /bin/tcsh
/var/tmp/portage/sys-libs/libstdc++-v3-3.3.6/work/gcc-3.3.6/gcc/fixinc/genfi
SHELL=/bin/sh: Command not found. export: Command not found.
if: Expression Syntax.
make[2]: *** [machname.h] Fel 1
make[2]: Leaving directory
`/var/tmp/portage/sys-libs/libstdc++-v3-3.3.6/work/build/gc make[1]:
*** [fixinc.sh] Fel 2 make[1]: *** Inväntar oavslutade jobb...
done
Forming and outputing automata tables...done
Output functions to work with automata...done
Automaton `pentium'
48 NDFA states, 90 NDFA arcs
48 DFA states, 90 DFA arcs
20 minimal DFA states, 62 minimal DFA arcs
29 all insns 16 insn equivalence classes
62 transition comb vector els, 320 trans table els: use comb
vect 62 state alts comb vector els, 320 state alts table els: use
comb vect 768 min delay table els, compression factor 2
Automaton `pentium_fpu'
80 NDFA states,172 NDFA arcs
80 DFA states, 172 DFA arcs
75 minimal DFA states, 162 minimal DFA arcs
29 all insns 8 insn equivalence classes
164 transition comb vector els, 600 trans table els: use comb
vect 164 state alts comb vector els, 600 state alts table els:
use comb vect 640 min delay table els, compression factor 1
237 all allocated states, 236 all allocated arcs
342 all allocated alternative states
226 all transition comb vector els, 920 all trans table els
226 all state alts comb vector els, 920 all state alts table els
1408 all min delay table els
12 locked states num
transformation: 0.004001, building DFA: 0.012000
DFA minimization: 0.00, making insn equivalence: 0.00
all automaton generation: 0.012000, output: 0.004000
/bin/sh
/var/tmp/portage/sys-libs/libstdc++-v3-3.3.6/work/gcc-3.3.6/gcc/move-if-change
echo timestamp s-attrtab
make[1]: Leaving directory
`/var/tmp/portage/sys-libs/libstdc++-v3-3.3.6/work/build/gc make:
*** [all-gcc] Fel 2
*
* ERROR: sys-libs/libstdc++-v3-3.3.6 failed.
* Call stack:
* ebuild.sh, line 1701: Called dyn_compile
* ebuild.sh, line 1039: Called qa_call
'src_compile'
* ebuild.sh, line 44: Called src_compile
* libstdc++-v3-3.3.6.ebuild, line 228: Called die
* The specific snippet of code:
* S=${WORKDIR}/build \
* emake all-target-libstdc++-v3 \
* LIBPATH=${LIBPATH} \
* BOOT_CFLAGS=${CFLAGS} STAGE1_CFLAGS=-O || die
* The die message:
* (no error message)
*
* If you need support, post the topmost build error, and the call
stack if relevant.
* A complete build log is located at
'/var/tmp/portage/sys-libs/libstdc++-v3-3.3.6/te
*
8--
Anyone have a clue?
Thanks!!!
Answer my self here:-)
Normally I'm a tcsh user so I changed root's default shell to tcsh.
After I change it back to bash everything builds just fine!
\\anders
Just some more info:
https://bugs.gentoo.org/show_bug.cgi?id=135706
--
[EMAIL PROTECTED] mailing list
[gentoo-user] sys-libs/libstdc++-v3-3.3.6 dies!
Hi,
I'm trying to run 'emerge -uDN world' but it's dies on
sys-libs/libstdc++-v3-3.3.6.
Here are some info:
8--
make TARGETS=oneprocess SHELL=/bin/tcsh CC=gcc CFLAGS=
-march=prescott -O2 -pipe s -Wstrict-prototypes -Wmissing-prototypes
-Wtraditional -pedantic -Wno-long-long -DHA FLAGS=
LIBERTY=/var/tmp/portage/sys-libs/libstdc++-v3-3.3.6/work/build/gcc/../libib
make[2]: Entering directory
`/var/tmp/portage/sys-libs/libstdc++-v3-3.3.6/work/build/g /bin/tcsh
/var/tmp/portage/sys-libs/libstdc++-v3-3.3.6/work/gcc-3.3.6/gcc/fixinc/genfi
SHELL=/bin/sh: Command not found. export: Command not found.
if: Expression Syntax.
make[2]: *** [machname.h] Fel 1
make[2]: Leaving directory
`/var/tmp/portage/sys-libs/libstdc++-v3-3.3.6/work/build/gc make[1]:
*** [fixinc.sh] Fel 2 make[1]: *** Inväntar oavslutade jobb...
done
Forming and outputing automata tables...done
Output functions to work with automata...done
Automaton `pentium'
48 NDFA states, 90 NDFA arcs
48 DFA states, 90 DFA arcs
20 minimal DFA states, 62 minimal DFA arcs
29 all insns 16 insn equivalence classes
62 transition comb vector els, 320 trans table els: use comb vect
62 state alts comb vector els, 320 state alts table els: use comb
vect 768 min delay table els, compression factor 2
Automaton `pentium_fpu'
80 NDFA states,172 NDFA arcs
80 DFA states, 172 DFA arcs
75 minimal DFA states, 162 minimal DFA arcs
29 all insns 8 insn equivalence classes
164 transition comb vector els, 600 trans table els: use comb vect
164 state alts comb vector els, 600 state alts table els: use comb
vect 640 min delay table els, compression factor 1
237 all allocated states, 236 all allocated arcs
342 all allocated alternative states
226 all transition comb vector els, 920 all trans table els
226 all state alts comb vector els, 920 all state alts table els
1408 all min delay table els
12 locked states num
transformation: 0.004001, building DFA: 0.012000
DFA minimization: 0.00, making insn equivalence: 0.00
all automaton generation: 0.012000, output: 0.004000
/bin/sh
/var/tmp/portage/sys-libs/libstdc++-v3-3.3.6/work/gcc-3.3.6/gcc/move-if-change
echo timestamp s-attrtab
make[1]: Leaving directory
`/var/tmp/portage/sys-libs/libstdc++-v3-3.3.6/work/build/gc make: ***
[all-gcc] Fel 2
*
* ERROR: sys-libs/libstdc++-v3-3.3.6 failed.
* Call stack:
* ebuild.sh, line 1701: Called dyn_compile
* ebuild.sh, line 1039: Called qa_call 'src_compile'
* ebuild.sh, line 44: Called src_compile
* libstdc++-v3-3.3.6.ebuild, line 228: Called die
* The specific snippet of code:
* S=${WORKDIR}/build \
* emake all-target-libstdc++-v3 \
* LIBPATH=${LIBPATH} \
* BOOT_CFLAGS=${CFLAGS} STAGE1_CFLAGS=-O || die
* The die message:
* (no error message)
*
* If you need support, post the topmost build error, and the call
stack if relevant.
* A complete build log is located at
'/var/tmp/portage/sys-libs/libstdc++-v3-3.3.6/te
*
8--
Anyone have a clue?
Thanks!!!
--
Anders Trobäck
Sweden
--
[EMAIL PROTECTED] mailing list
