Re: [gentoo-user] Wlan disappeared after suspend
On Tuesday, 13. Sep 2016, 08:08:39 -0400, Michael Orlitzky wrote: > On 09/13/2016 04:23 AM, Bertram Scharpf wrote: > > > > after suspend, my wlan is dead and it cannot be restarted > > > > What do I have to try? > > I had this same problem with the ath5k driver (still do, I bet) > on my Thinkpad x61s. What happens if you run "sudo rfkill list" > after you resume from suspend? Does it show that the wireless is > "hard blocked"? Doesn't seem to. # rfkill list# before suspend 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no # rfkill list# after resume 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Bertram -- Bertram Scharpf Stuttgart, Deutschland/Germany http://www.bertram-scharpf.de
Re: [gentoo-user] Wlan disappeared after suspend
On 09/13/2016 09:18 AM, Bertram Scharpf wrote: > > Doesn't seem to. > > # rfkill list# before suspend > 0: phy0: Wireless LAN > Soft blocked: no > Hard blocked: no > # rfkill list# after resume > 0: phy0: Wireless LAN > Soft blocked: no > Hard blocked: no > Ok, different problem then, good luck =)
Re: [gentoo-user] Wlan disappeared after suspend
On 09/13/2016 04:23 AM, Bertram Scharpf wrote: > Hi, > > after suspend, my wlan is dead and it cannot be restarted > > What do I have to try? I had this same problem with the ath5k driver (still do, I bet) on my Thinkpad x61s. What happens if you run "sudo rfkill list" after you resume from suspend? Does it show that the wireless is "hard blocked"? In my case, it was, so I tried something stupid. I patched my kernel to answer "no" to the question "is rfkill enabled?"... and it worked! --- a/drivers/net/wireless/ath/ath5k/rfkill.c 2012-05-28 21:16:04.0 -0400 +++ b/drivers/net/wireless/ath/ath5k/rfkill.c 2012-05-28 21:17:17.0 -0400 @@ -66,10 +66,8 @@ static bool ath5k_is_rfkill_set(struct ath5k_hw *ah) { - /* configuring GPIO for input for some reason disables rfkill */ - /*ath5k_hw_set_gpio_input(ah, ah->rf_kill.gpio);*/ - return ath5k_hw_get_gpio(ah, ah->rf_kill.gpio) == - ah->rf_kill.polarity; +/* Hard code this to work around a stupid bug. */ +return 0; } static void Maybe you can do the same thing for your driver, if rfkill is actually the issue. I have a possibly outdated writeup of the issue here: http://michael.orlitzky.com/articles/thinkpad_x61s_ath5k_rfkill_issues.php
[gentoo-user] Wlan disappeared after suspend
Hi, after suspend, my wlan is dead and it cannot be restarted. I searched Google for the problem and I found a solution that might work, I thought. But it doesn't. I added a line to /etc/pm/config.d/gentoo: SUSPEND_MODULES="r8188eu" Then, I recompiled the kernel to load r8188eu as a module. It didn't help. After the suspend, when I say lsmod, the module is still there. Maybe this is the source of the problem. What do I have to try? Thanks in advance. Bertram -- Bertram Scharpf Stuttgart, Deutschland/Germany http://www.bertram-scharpf.de
Re: [gentoo-user] WLAN with fixed IP
Am 14.11.2012 18:55, schrieb Helmut Jarausch: > On 11/13/2012 07:08:24 PM, Florian Philipp wrote: >> Am 13.11.2012 17:27, schrieb Bruce Hill: >> > On Tue, Nov 13, 2012 at 04:52:25PM +0100, Helmut Jarausch wrote: >> >> > I'd like to assign fixed IP numbers to computers of a local >> map MAC addresses to IP addresses. >> > >> [...] >> > >> > If you just want to setup a static IP per machine, /etc/conf.d/net: >> > >> > config_wlan0="192.168.1.2/24" >> > routes_wlan0="default via 192.168.1.1" >> > >> > Hope this helps. If it's too confusing, might mention where DHCP is >> handed >> > out, and some more about your LAN. >> >> The following is taken directly from my /etc/conf.d/net with minimal >> editing. It assigns configs based on SSIDs. If I'm not mistaken (haven't >> tested it in a long time) this means it will default to DHCP for >> unspecified nets. Good for quick and dirty setups while traveling: >> >> modules_wlan0="wpa_supplicant" >> >> config_MySSID="192.168.2.5 netmask 255.255.255.0" >> routes_MySSID="default via 192.168.2.1" >> dns_servers_MySSID="192.168.6.1" >> dns_domain_MySSID="example.net" >> >> config_SomeHotelSSID="dhcp" >> >> config_HotelWithVPN="dhcp" >> dhcp_HotelWithVPN="nodns" >> dns_servers_HotelWithVPN="192.168.6.1" # DNS server via VPN >> dns_domain_HotelWithVPN="vpn.example.net" >> >> Hope this helps, > > Thanks Florian, > > it *nearly* works. > The line > routes_MySSID="default via 192.168.2.1" > > (adapted to my IPs) > doesn't seem to have any effect. > > Only if I add > > route add default gw 192.168.2.1 wlan0 > > to /etc/local.d/local.start > it does work. > > I have no idea why the routes_MySSID=... line doesn't have any effect. > > Helmut. > Just guessing, could it be related to iproute2? From net.example: # If you don't specify an interface then we prefer iproute2 if it's # installed. To prefer ifconfig over iproute2 modules="!iproute2" signature.asc Description: OpenPGP digital signature
Re: [gentoo-user] WLAN with fixed IP
On 11/13/2012 07:08:24 PM, Florian Philipp wrote: Am 13.11.2012 17:27, schrieb Bruce Hill: > On Tue, Nov 13, 2012 at 04:52:25PM +0100, Helmut Jarausch wrote: > I'd like to assign fixed IP numbers to computers of a local map MAC addresses to IP addresses. > [...] > > If you just want to setup a static IP per machine, /etc/conf.d/net: > > config_wlan0="192.168.1.2/24" > routes_wlan0="default via 192.168.1.1" > > Hope this helps. If it's too confusing, might mention where DHCP is handed > out, and some more about your LAN. The following is taken directly from my /etc/conf.d/net with minimal editing. It assigns configs based on SSIDs. If I'm not mistaken (haven't tested it in a long time) this means it will default to DHCP for unspecified nets. Good for quick and dirty setups while traveling: modules_wlan0="wpa_supplicant" config_MySSID="192.168.2.5 netmask 255.255.255.0" routes_MySSID="default via 192.168.2.1" dns_servers_MySSID="192.168.6.1" dns_domain_MySSID="example.net" config_SomeHotelSSID="dhcp" config_HotelWithVPN="dhcp" dhcp_HotelWithVPN="nodns" dns_servers_HotelWithVPN="192.168.6.1" # DNS server via VPN dns_domain_HotelWithVPN="vpn.example.net" Hope this helps, Thanks Florian, it *nearly* works. The line routes_MySSID="default via 192.168.2.1" (adapted to my IPs) doesn't seem to have any effect. Only if I add route add default gw 192.168.2.1 wlan0 to /etc/local.d/local.start it does work. I have no idea why the routes_MySSID=... line doesn't have any effect. Helmut.
Re: [gentoo-user] WLAN with fixed IP
On Tue, Nov 13, 2012 at 11:39:40AM +0100, Helmut Jarausch wrote: > Hi, > I'd like to assign fixed IP numbers to computers of a local network. > > Using dhcp as in > > modules="wpa_supplicant" > wpa_supplicant_wlan0="-Dwext -iwlan0" > config_wlan0="dhcp" > > works just fine but depends on dhcp for IP assignment. > > The following does not work, i.e. the network is not working > > modules="wpa_supplicant" > wpa_supplicant_wlan0="-Dwext -iwlan0" > > config_wlan0="192.168.1.2 netmask 255.255.255.0 brd 192.168.1.255" > routes_wlan0="default via 192.168.1.1" > dns_servers_wlan0="192.168.1." > > > What am I missing. What does the "dhcp" option imply? Are there any > additional > necessary initialization (like an ifup) ? > > Many thanks for a hint, > Helmut. Forgot to mention that /usr/share/doc/openrc*/net.example* is pretty well commented and 'recommended'. -- Happy Penguin Gymnastics >') 126 Fenco Drive ( \ Tupelo, MS 38801 ^^ ad...@happypenguingymnastics.com 662-321-7009 http://happypenguingymnastics.com/ FB: http://tiny.cc/HappyPenguinGymnastics Don't top-post: http://en.wikipedia.org/wiki/Top_post#Top-posting
Re: [gentoo-user] WLAN with fixed IP
Am 13.11.2012 17:27, schrieb Bruce Hill: > On Tue, Nov 13, 2012 at 04:52:25PM +0100, Helmut Jarausch wrote: > I'd like to assign fixed IP numbers to computers of a local map MAC addresses to IP addresses. > [...] > > If you just want to setup a static IP per machine, /etc/conf.d/net: > > config_wlan0="192.168.1.2/24" > routes_wlan0="default via 192.168.1.1" > > Hope this helps. If it's too confusing, might mention where DHCP is handed > out, and some more about your LAN. The following is taken directly from my /etc/conf.d/net with minimal editing. It assigns configs based on SSIDs. If I'm not mistaken (haven't tested it in a long time) this means it will default to DHCP for unspecified nets. Good for quick and dirty setups while traveling: modules_wlan0="wpa_supplicant" config_MySSID="192.168.2.5 netmask 255.255.255.0" routes_MySSID="default via 192.168.2.1" dns_servers_MySSID="192.168.6.1" dns_domain_MySSID="example.net" config_SomeHotelSSID="dhcp" config_HotelWithVPN="dhcp" dhcp_HotelWithVPN="nodns" dns_servers_HotelWithVPN="192.168.6.1" # DNS server via VPN dns_domain_HotelWithVPN="vpn.example.net" Hope this helps, Florian Philipp signature.asc Description: OpenPGP digital signature
Re: [gentoo-user] WLAN with fixed IP
On Tue, Nov 13, 2012 at 04:52:25PM +0100, Helmut Jarausch wrote: > >> > >> > I'd like to assign fixed IP numbers to computers of a local > >> map MAC addresses to IP addresses. This is what your /etc/dhcp/dhcp.conf would look like on the router, or how it should be configured wherever DHCP is handed out: authoritative; ddns-update-style none; default-lease-time 1800; max-lease-time 1800; subnet 192.168.54.0 netmask 255.255.255.0 { range 192.168.54.10 192.168.54.50; option broadcast-address 192.168.54.255; option domain-name-servers 192.168.54.1; option routers 192.168.54.1; } subnet 192.168.100.0 netmask 255.255.255.0 { range 192.168.100.10 192.168.100.50; option broadcast-address 192.168.100.255; option domain-name-servers 192.168.100.1; option routers 192.168.100.1; } host server { hardware ethernet 00:d0:68:0b:87:66; fixed-address 192.168.100.3; } You of course need to adjust for your network(s). And I'd install dhcpcd and put it in the default runlevel. Then on the client you have /etc/conf.d/net like this: modules_wlan0="wpa_supplicant" wpa_supplicant_wlan0="-Dwext" config_wlan0="dhcp" if you're using wpa_supplicant (you mentioned wpa_cli). And your /etc/wpa_supplicant/wpa_supplicant.conf would look like: ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=wheel #ap_scan=0 #update_config=1 network={ ssid="YourSSID" psk=your-secret-key scan_ssid=1 proto=WPA2 key_mgmt=WPA-PSK group=CCMP TKIP pairwise=CCMP TKIP priority=5 } If you just want to setup a static IP per machine, /etc/conf.d/net: config_wlan0="192.168.1.2/24" routes_wlan0="default via 192.168.1.1" Hope this helps. If it's too confusing, might mention where DHCP is handed out, and some more about your LAN. -- Happy Penguin Gymnastics >') 126 Fenco Drive ( \ Tupelo, MS 38801 ^^ ad...@happypenguingymnastics.com 662-321-7009 http://happypenguingymnastics.com/ FB: http://tiny.cc/HappyPenguinGymnastics Don't top-post: http://en.wikipedia.org/wiki/Top_post#Top-posting
Re: [gentoo-user] WLAN with fixed IP
On 11/13/2012 12:15:35 PM, Helmut Jarausch wrote: On 11/13/2012 11:53:49 AM, Neil Bothwick wrote: On Tue, 13 Nov 2012 11:39:40 +0100, Helmut Jarausch wrote: > I'd like to assign fixed IP numbers to computers of a local network. I prefer to do this on the DHCP server, that way all my network configuration is in one place and if I move a computer to a different network it will still work as DHCP is enabled. Most DHCP servers let you map MAC addresses to IP addresses. > config_wlan0="192.168.1.2 netmask 255.255.255.0 brd 192.168.1.255" > routes_wlan0="default via 192.168.1.1" > dns_servers_wlan0="192.168.1." Yes, that's a typo of course It should read dns_servers_wlan0="192.168.1.1" I've written this from memory since I don't have access to that machine at the moment. That last line is wrong, is the network not working at all or is it just DNS resolution that is failing? It says something like "network not ready", but I'll check this afternoon. I remember that ifconfig wlan0 did show the right IP. Now, from the machine in question, I get connect: Network is unreachable /var/log/messages shows Nov 13 14:54:34 localhost kernel: wlan0: authenticate with 00:1d:6a:83:9f:75 Nov 13 14:54:34 localhost kernel: wlan0: send auth to 00:1d:6a:83:9f:75 (try 1/3) Nov 13 14:54:34 localhost kernel: wlan0: authenticated Nov 13 14:54:34 localhost kernel: wlan0: associate with 00:1d:6a:83:9f:75 (try 1/3) Nov 13 14:54:34 localhost kernel: wlan0: RX AssocResp from 00:1d:6a:83:9f:75 (capab=0x431 status=0 aid=1) Nov 13 14:54:34 localhost kernel: wlan0: associated Nov 13 14:54:34 localhost kernel: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready Nov 13 14:54:34 localhost wpa_cli: interface wlan0 CONNECTED Nov 13 14:54:35 localhost /etc/init.d/net.wlan0[3605]: ERROR: net.wlan0 failed to start Nov 13 14:54:35 localhost wpa_cli: executing '/etc/init.d/net.wlan0 --quiet start' failed ^^^ This is the reason But where is wpa_cli started, when I have config_wlan0="dhcp"instead of config_wlan0="192.168.1.33 netmsk 255.255.255.0 broadcast 192.168.1.255" Sometimes, openrc is hard. I even don't know where to start searching. Many thanks for a hint, Helmut.
Re: [gentoo-user] WLAN with fixed IP
On 11/13/2012 11:53:49 AM, Neil Bothwick wrote: On Tue, 13 Nov 2012 11:39:40 +0100, Helmut Jarausch wrote: > I'd like to assign fixed IP numbers to computers of a local network. I prefer to do this on the DHCP server, that way all my network configuration is in one place and if I move a computer to a different network it will still work as DHCP is enabled. Most DHCP servers let you map MAC addresses to IP addresses. > config_wlan0="192.168.1.2 netmask 255.255.255.0 brd 192.168.1.255" > routes_wlan0="default via 192.168.1.1" > dns_servers_wlan0="192.168.1." Yes, that's a typo of course It should read dns_servers_wlan0="192.168.1.1" I've written this from memory since I don't have access to that machine at the moment. That last line is wrong, is the network not working at all or is it just DNS resolution that is failing? It says something like "network not ready", but I'll check this afternoon. I remember that ifconfig wlan0 did show the right IP. Thanks, Helmut.
Re: [gentoo-user] WLAN with fixed IP
On Tue, 13 Nov 2012 11:39:40 +0100, Helmut Jarausch wrote: > I'd like to assign fixed IP numbers to computers of a local network. I prefer to do this on the DHCP server, that way all my network configuration is in one place and if I move a computer to a different network it will still work as DHCP is enabled. Most DHCP servers let you map MAC addresses to IP addresses. > config_wlan0="192.168.1.2 netmask 255.255.255.0 brd 192.168.1.255" > routes_wlan0="default via 192.168.1.1" > dns_servers_wlan0="192.168.1." That last line is wrong, is the network not working at all or is it just DNS resolution that is failing? -- Neil Bothwick "Apple I" (c) Copyright 1767, Sir Isaac Newton. signature.asc Description: PGP signature
[gentoo-user] WLAN with fixed IP
Hi, I'd like to assign fixed IP numbers to computers of a local network. Using dhcp as in modules="wpa_supplicant" wpa_supplicant_wlan0="-Dwext -iwlan0" config_wlan0="dhcp" works just fine but depends on dhcp for IP assignment. The following does not work, i.e. the network is not working modules="wpa_supplicant" wpa_supplicant_wlan0="-Dwext -iwlan0" config_wlan0="192.168.1.2 netmask 255.255.255.0 brd 192.168.1.255" routes_wlan0="default via 192.168.1.1" dns_servers_wlan0="192.168.1." What am I missing. What does the "dhcp" option imply? Are there any additional necessary initialization (like an ifup) ? Many thanks for a hint, Helmut.
Re: [gentoo-user] WLAN speed either 800KB or 3MB
On 25 Apr 2010, at 10:07, Adam wrote: Downloads over my 802.1g WLAN seem to always be at either of these two speeds. Billon ADSL+WLAN router one end, Intel 5100 on the laptop. Any ideas on how i stop it falling back to the slower speed? Move the laptop closer to the access point. Stroller.
Re: [gentoo-user] WLAN speed either 800KB or 3MB
On Sunday 25 April 2010 13:19:51 Adam wrote: > > Check that you have disabled 802.11b on your router, or you may find that > > an adjacent client who's running 802.11b will drag your router down to > > 11Mb/s max (the actual throughput will be lower). > > Router is already fixed to g only. > > > While you're experiencing the lower downloads you can run iwlist > > scan to see the speed at which your NIC is connecting at. If it is > > 802.11g it'll say so: > > Thanks, i can see my own router (Cell 01) and three others, looks like I > should try channel 13. I can't see the speed shown in the output tho. > > wlan0 Scan completed : > Cell 01 - Address: > Channel:1 > Frequency:2.412 GHz (Channel 1) > Quality=69/70 Signal level=-41 dBm > > Cell 02 - Address: > Channel:1 > Frequency:2.412 GHz (Channel 1) > Quality=32/70 Signal level=-78 dBm > > Cell 03 - Address: > Channel:6 > Frequency:2.437 GHz (Channel 6) > Quality=60/70 Signal level=-50 dBm > > Cell 04 - Address: > Channel:6 > Frequency:2.437 GHz (Channel 6) > Quality=48/70 Signal level=-62 dBm Try channels 11 and 13, unless they are already congested. -- Regards, Mick signature.asc Description: This is a digitally signed message part.
Re: [gentoo-user] WLAN speed either 800KB or 3MB
> Check that you have disabled 802.11b on your router, or you may find that an > adjacent client who's running 802.11b will drag your router down to 11Mb/s > max > (the actual throughput will be lower). Router is already fixed to g only. > While you're experiencing the lower downloads you can run iwlist scan > to see the speed at which your NIC is connecting at. If it is 802.11g it'll > say so: Thanks, i can see my own router (Cell 01) and three others, looks like I should try channel 13. I can't see the speed shown in the output tho. wlan0 Scan completed : Cell 01 - Address: Channel:1 Frequency:2.412 GHz (Channel 1) Quality=69/70 Signal level=-41 dBm Cell 02 - Address: Channel:1 Frequency:2.412 GHz (Channel 1) Quality=32/70 Signal level=-78 dBm Cell 03 - Address: Channel:6 Frequency:2.437 GHz (Channel 6) Quality=60/70 Signal level=-50 dBm Cell 04 - Address: Channel:6 Frequency:2.437 GHz (Channel 6) Quality=48/70 Signal level=-62 dBm
Re: [gentoo-user] WLAN speed either 800KB or 3MB
On Sunday 25 April 2010 12:02:08 Adam wrote: > >> Downloads over my 802.1g WLAN seem to always be at either of these two > >> speeds. Billon ADSL+WLAN router one end, Intel 5100 on the laptop. Any > >> ideas on how i stop it falling back to the slower speed? > > > > look for a not contested channel? > > I had assumed that congestion would reveal itself as varying speeds, as > expected with multiple users on a shared medium, not step jumps between > the two speeds that i'm seeing... Am I wrong? Check that you have disabled 802.11b on your router, or you may find that an adjacent client who's running 802.11b will drag your router down to 11Mb/s max (the actual throughput will be lower). While you're experiencing the lower downloads you can run iwlist scan to see the speed at which your NIC is connecting at. If it is 802.11g it'll say so: Bit Rates:54 Mb/s Extra: Rates (Mb/s): 1 2 5.5 6 9 11 12 18 24 36 48 54 Also, iwconfig will show you IEEE 802.11g or IEEE 802.11b/g accordingly. -- Regards, Mick signature.asc Description: This is a digitally signed message part.
Re: [gentoo-user] WLAN speed either 800KB or 3MB
On Sonntag 25 April 2010, Adam wrote: > >> Downloads over my 802.1g WLAN seem to always be at either of these two > >> speeds. Billon ADSL+WLAN router one end, Intel 5100 on the laptop. Any > >> ideas on how i stop it falling back to the slower speed? > > > > look for a not contested channel? > > I had assumed that congestion would reveal itself as varying speeds, as > expected with multiple users on a shared medium, not step jumps between > the two speeds that i'm seeing... Am I wrong? depends on the situation and the other people's reaction ;)
Re: [gentoo-user] WLAN speed either 800KB or 3MB
>> Downloads over my 802.1g WLAN seem to always be at either of these two >> speeds. Billon ADSL+WLAN router one end, Intel 5100 on the laptop. Any >> ideas on how i stop it falling back to the slower speed? > > look for a not contested channel? I had assumed that congestion would reveal itself as varying speeds, as expected with multiple users on a shared medium, not step jumps between the two speeds that i'm seeing... Am I wrong?
Re: [gentoo-user] WLAN speed either 800KB or 3MB
On Sonntag 25 April 2010, Adam wrote: > Downloads over my 802.1g WLAN seem to always be at either of these two > speeds. Billon ADSL+WLAN router one end, Intel 5100 on the laptop. Any > ideas on how i stop it falling back to the slower speed? look for a not contested channel?
[gentoo-user] WLAN speed either 800KB or 3MB
Downloads over my 802.1g WLAN seem to always be at either of these two speeds. Billon ADSL+WLAN router one end, Intel 5100 on the laptop. Any ideas on how i stop it falling back to the slower speed?
Re: [gentoo-user] wlan
Am Dienstag 23 März 2010 19:39:32 schrieb Thomas Bruns: > Hello NGs, > > when connect my usb-wlan-stick i get this message: > > usb 1-5: USB disconnect, address 3 > usb 1-5: new high speed USB device using ehci_hcd and address 4 > usb 1-5: New USB device found, idVendor=0df6, idProduct=0040 > usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 > usb 1-5: Product: 802.11 n WLAN > usb 1-5: Manufacturer: Ralink > usb 1-5: SerialNumber: 1.0 > usb 1-5: configuration #1 chosen from 1 choice > phy1 -> rt2x00_set_chip: Info - Chipset detected - rt: 1600, rf: 0007, rev: > 30710211. > phy1 -> rt2800usb_init_eeprom: Error - Invalid RT chipset detected. > phy1 -> rt2x00lib_probe_dev: Error - Failed to allocate device. > > I use a 2.6.31-gentoo-r10 Kernel. > > Can everybody help me? > lsmod | grep rt rt2800usb 37944 0 rt2x00usb 12136 1 rt2800usb rt2x00lib 31656 2 rt2800usb,rt2x00usb led_class 4976 1 rt2x00lib input_polldev 4376 1 rt2x00lib mac80211 137976 2 rt2x00usb,rt2x00lib cfg80211 92672 2 rt2x00lib,mac80211 crc_ccitt 2264 1 rt2800usb rtc 7960 0 usbcore 145764 12 rt2800usb,rt2x00usb,uvcvideo,snd_usb_audio,snd_usb_lib,sl811_hcd,usbhid,ohci_hcd,uhci_hcd,usb_storage,ehci_hcd scsi_transport_sas 30488 3 aic94xx,libsas,mptsas scsi_transport_fc 47180 3 lpfc,qla2xxx,mptfc scsi_tgt 13200 1 scsi_transport_fc scsi_transport_spi 24904 5 mptspi,dmx3191d,sym53c8xx,aic7xxx,aic79xx firmware_class 9192 8 rt2x00lib,tg3,aic94xx,libsas,qla2xxx,qla1280,advansys,pcmcia pata_artop 6924 0 -- Gruß Thomas --- CBUILD="x86_64-pc-linux-gnu" CFLAGS="-march=core2 -O2 -msse4.1 -msse4.2 -pipe" CXXFLAGS="-march=core2 -O2 -msse4.1 -msse4.2 -pipe" LDFLAGS="-Wl,-O1,--hash-style=gnu,--sort-common,--as-needed"
[gentoo-user] wlan
Hello NGs, when connect my usb-wlan-stick i get this message: usb 1-5: USB disconnect, address 3 usb 1-5: new high speed USB device using ehci_hcd and address 4 usb 1-5: New USB device found, idVendor=0df6, idProduct=0040 usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-5: Product: 802.11 n WLAN usb 1-5: Manufacturer: Ralink usb 1-5: SerialNumber: 1.0 usb 1-5: configuration #1 chosen from 1 choice phy1 -> rt2x00_set_chip: Info - Chipset detected - rt: 1600, rf: 0007, rev: 30710211. phy1 -> rt2800usb_init_eeprom: Error - Invalid RT chipset detected. phy1 -> rt2x00lib_probe_dev: Error - Failed to allocate device. I use a 2.6.31-gentoo-r10 Kernel. Can everybody help me? -- Gruß Thomas --- CBUILD="x86_64-pc-linux-gnu" CFLAGS="-march=core2 -O2 -msse4.1 -msse4.2 -pipe" CXXFLAGS="-march=core2 -O2 -msse4.1 -msse4.2 -pipe" LDFLAGS="-Wl,-O1,--hash-style=gnu,--sort-common,--as-needed"
Re: [gentoo-user] WLAN performance
On 21 Mar 2008, at 10:33, Florian Philipp wrote: ... both cards are cofigured for 54 MBit/s ... I only get about 13 MBit/s, both on NFS and scp. I'd be really quite happy with that. As BillK remarks, 50% of your 54 Mbit is consumed by protocol overhead. You're probably going to tell us that the two machines are currently right next to each other, so losing an additional 50% to interference & other intangibles might seem at first sight unreasonable, but I doubt you'll ever do any better than that, and you could waste a lot of time trying. Wireless is for surfing on the sofa - you can easily get eighty times this throughput with a cable, so investing time & energy in trying to get a two-times performance increase is a poor return. Stroller. -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] WLAN performance
ahh, marketing. Some people will believe anything! Check the table at http://www.oreillynet.com/pub/a/wireless/2003/08/08/wireless_throughput.html or numerous other guides courtesy of google. This shows that maximum throughput is roughly 27Mb/s for 54g, but in my experience its much less in the real world. Note that configuring a card for 54mb/s is the maximum - unless you are quite close (distance wise), have little interference and dont have a busy 802.11b on the same AP, you are not even going to see a 54, but a fallback. And I think encryption will clip it even further if you are using that (as you should be!) BillK On Fri, 2008-03-21 at 11:33 +0100, Florian Philipp wrote: > Hi list! > > Can anyone tell me how I could find the bottleneck on my wireless > network? According to iwconfig, both cards are cofigured for 54 MBit/s > but I only get about 13 MBit/s, both on NFS and scp. > > Might it be the driver (iwl3945, rt61 from kernel 2.6.24)? > Unfortunately, iwspy doesn't work on these cards. -- William Kenworthy <[EMAIL PROTECTED]> Home in Perth! -- gentoo-user@lists.gentoo.org mailing list
[gentoo-user] WLAN performance
Hi list! Can anyone tell me how I could find the bottleneck on my wireless network? According to iwconfig, both cards are cofigured for 54 MBit/s but I only get about 13 MBit/s, both on NFS and scp. Might it be the driver (iwl3945, rt61 from kernel 2.6.24)? Unfortunately, iwspy doesn't work on these cards. signature.asc Description: This is a digitally signed message part
Re: [gentoo-user] WLAN daemon?
On Saturday 14 April 2007 01:35, Daniel Pielmeier wrote: > Sven Köhler schrieb: > > Hi, > > > > is there any "WLAN daemon" that scans for wireless LANs and loggs into > > them, if he finds one, that i prefer? > > You will find some useful informaton and links here: > http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html As I understand it a good WLAN device driver will associate and re-associate with the next available device when it comes into range. Some drivers are not that good at re-associating. In that case you may have to modprobe -r and then reload the driver, or unplug/replug the WiFi device if it is a USB/cardbus. If you engage in the noble sport of wardriving then you will need to use a good device that has well developed drivers in Linux. I am not aware of a daemon that performs this function in parallel to the WiFi device driver, sort of a ifplugd for wireless, but others may know better. -- Regards, Mick pgpQLLB7SYHNk.pgp Description: PGP signature
Re: [gentoo-user] WLAN daemon?
Sven Köhler schrieb: > Hi, > > is there any "WLAN daemon" that scans for wireless LANs and loggs into > them, if he finds one, that i prefer? > > > Thanks, > Sven > Maybe wifi-radar fits your needs! -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] WLAN daemon?
Am Samstag, 14. April 2007 02:10:42 schrieb Sven Köhler: > Hi, > > is there any "WLAN daemon" that scans for wireless LANs and loggs into > them, if he finds one, that i prefer? > > > Thanks, > Sven emerge wpa_supplicant signature.asc Description: This is a digitally signed message part.
[gentoo-user] WLAN daemon?
Hi, is there any "WLAN daemon" that scans for wireless LANs and loggs into them, if he finds one, that i prefer? Thanks, Sven signature.asc Description: OpenPGP digital signature
Re: [gentoo-user] WLAN
On 3/6/06, Goran Maksimoviæ <[EMAIL PROTECTED]> wrote: > Hello! > > I have recently subscribed to this mailing list so if someone has already > asked > this question I apologize in advance. I installed yesterday Gentoo 2006.0 with > LiveCD on my laptop hp nx9105 and I'm looking how to setup my wireless card. I > know that their aren't WLAN card drivers for Linux but I know that I can use > my > Windows XP drivers with ndiswrapper package, so my question is what is the > procedure to setup my WLAN card. > > Goran > http://www.unicolet.org/nx9105.html http://gentoo-wiki.com/HOWTO_Wireless_Configuration_and_Startup It can't be better than that :) good luck... Don't forget to thank Umberto Nicoletti for his complete description on how to make your system work... > > -- T - C o m - - W e b m a i l -- > Ova poruka poslana je upotrebom T-Com Webmail usluge. > Postani redatelj najgledanijeg hrvatskog filma! > http://www.tportal.hr/100sekundislave/ > > > > -- > gentoo-user@gentoo.org mailing list > > -- Daniel da Veiga Computer Operator - RS - Brazil -BEGIN GEEK CODE BLOCK- Version: 3.1 GCM/IT/P/O d-? s:- a? C++$ UBLA++ P+ L++ E--- W+++$ N o+ K- w O M- V- PS PE Y PGP- t+ 5 X+++ R+* tv b+ DI+++ D+ G+ e h+ r+ y++ --END GEEK CODE BLOCK-- -- gentoo-user@gentoo.org mailing list
[gentoo-user] WLAN
Hello! I have recently subscribed to this mailing list so if someone has already asked this question I apologize in advance. I installed yesterday Gentoo 2006.0 with LiveCD on my laptop hp nx9105 and I'm looking how to setup my wireless card. I know that their aren't WLAN card drivers for Linux but I know that I can use my Windows XP drivers with ndiswrapper package, so my question is what is the procedure to setup my WLAN card. Goran -- T - C o m - - W e b m a i l -- Ova poruka poslana je upotrebom T-Com Webmail usluge. Postani redatelj najgledanijeg hrvatskog filma! http://www.tportal.hr/100sekundislave/ -- gentoo-user@gentoo.org mailing list