Re: [Geoserver-devel] You have been... ref0rmatt3d!

2018-06-23 Thread Andrea Aime 
Thanks Ben

Cheers
Andrea

Il dom 24 giu 2018, 03:01 Ben Caradoc-Davies  ha scritto:

> Andrea,
>
> I have added a fmt.skip property on all active branches of GeoTools and
> GeoServer. This allows -Dfmt.skip to skip formatting. This is useful in
> loops of many short Maven runs of a single test (e.g. hunting
> intermittent failures), when formatting can otherwise take most of the
> time.
>
> Kind regards,
>
> --
> Ben Caradoc-Davies 
> Director
> Transient Software Limited 
> New Zealand
>
--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot___
Geoserver-devel mailing list
Geoserver-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/geoserver-devel

Re: [Geoserver-devel] You have been... ref0rmatt3d!

2018-06-23 Thread Ben Caradoc-Davies 

Andrea,

I have added a fmt.skip property on all active branches of GeoTools and 
GeoServer. This allows -Dfmt.skip to skip formatting. This is useful in 
loops of many short Maven runs of a single test (e.g. hunting 
intermittent failures), when formatting can otherwise take most of the time.


Kind regards,

--
Ben Caradoc-Davies 
Director
Transient Software Limited 
New Zealand

--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
___
Geoserver-devel mailing list
Geoserver-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/geoserver-devel

Re: [Geoserver-devel] You have been... ref0rmatt3d!

2018-06-12 Thread Ben Caradoc-Davies 
And thanks again, Andrea. The new Maven formatter workflow is working 
well for me. Much better than fussing over IDE settings. Much appreciated.


Kind regards,
Ben.

On 12/06/18 19:07, Andrea Aime wrote:

Thanks Ben

Cheers
Andrea

On Mon, Jun 11, 2018 at 10:29 PM, Ben Caradoc-Davies 
wrote:


Andrea,

"-Dfmt.action=check" was applied only to the community build because the
Travis CI script line is two commands separated by "&&" and
"-Dfmt.action=check" was only appended to the script line. I have added
"-Dfmt.action=check" to the first (main build) command on master, 2.13.x,
and 2.12.x. We should close-reopen pull requests to ensure that their
formatting is checked.

Kind regards,
Ben.

On 10/06/18 02:25, Andrea Aime wrote:


Hi all,
as agreed, the big bad reformat landed on master, 2.13.x and 2.12.x.

Back to normal business for everybody :-)

And oh, I've modified the setup so that on Travis it won't check for local
modifications, but directly
for faulty formatting (the error message should be easier to understand).
The Jenkins builds are also following the same settings

Oh, I've noticed there is a newer version of the formatting plugin, but as
far as I could tell,
it was not fixing any bug of significant, while it was changing the
formatting rules for annotations a bit,
changing several files. I skipped this upgrade to avoid adding extra noise
on the commit history...
if need be, we can revisit and upgrade later I guess

Cheers
Andrea

== GeoServer Professional Services from the experts! Visit
http://goo.gl/it488V for more information. == Ing. Andrea Aime @geowolf
Technical Lead GeoSolutions S.A.S. Via di Montramito 3/A 55054 Massarosa
(LU) phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 339 8844549
http://www.geo-solutions.it http://twitter.com/geosolutions_it
--- *Con riferimento
alla normativa sul trattamento dei dati personali (Reg. UE 2016/679 -
Regolamento generale sulla protezione dei dati “GDPR”), si precisa che
ogni
circostanza inerente alla presente email (il suo contenuto, gli eventuali
allegati, etc.) è un dato la cui conoscenza è riservata al/i solo/i
destinatario/i indicati dallo scrivente. Se il messaggio Le è giunto per
errore, è tenuta/o a cancellarlo, ogni altra operazione è illecita. Le
sarei comunque grato se potesse darmene notizia. This email is intended
only for the person or entity to which it is addressed and may contain
information that is privileged, confidential or otherwise protected from
disclosure. We remind that - as provided by European Regulation 2016/679
“GDPR” - copying, dissemination or use of this e-mail or the information
herein by anyone other than the intended recipient is prohibited. If you
have received this email by mistake, please notify us immediately by
telephone or e-mail.*




--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot



___
Geoserver-devel mailing list
Geoserver-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/geoserver-devel



--
Ben Caradoc-Davies 
Director
Transient Software Limited 
New Zealand







--
Ben Caradoc-Davies 
Director
Transient Software Limited 
New Zealand

--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
___
Geoserver-devel mailing list
Geoserver-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/geoserver-devel

Re: [Geoserver-devel] You have been... ref0rmatt3d!

2018-06-12 Thread Andrea Aime 
Thanks Ben

Cheers
Andrea

On Mon, Jun 11, 2018 at 10:29 PM, Ben Caradoc-Davies 
wrote:

> Andrea,
>
> "-Dfmt.action=check" was applied only to the community build because the
> Travis CI script line is two commands separated by "&&" and
> "-Dfmt.action=check" was only appended to the script line. I have added
> "-Dfmt.action=check" to the first (main build) command on master, 2.13.x,
> and 2.12.x. We should close-reopen pull requests to ensure that their
> formatting is checked.
>
> Kind regards,
> Ben.
>
> On 10/06/18 02:25, Andrea Aime wrote:
>
>> Hi all,
>> as agreed, the big bad reformat landed on master, 2.13.x and 2.12.x.
>>
>> Back to normal business for everybody :-)
>>
>> And oh, I've modified the setup so that on Travis it won't check for local
>> modifications, but directly
>> for faulty formatting (the error message should be easier to understand).
>> The Jenkins builds are also following the same settings
>>
>> Oh, I've noticed there is a newer version of the formatting plugin, but as
>> far as I could tell,
>> it was not fixing any bug of significant, while it was changing the
>> formatting rules for annotations a bit,
>> changing several files. I skipped this upgrade to avoid adding extra noise
>> on the commit history...
>> if need be, we can revisit and upgrade later I guess
>>
>> Cheers
>> Andrea
>>
>> == GeoServer Professional Services from the experts! Visit
>> http://goo.gl/it488V for more information. == Ing. Andrea Aime @geowolf
>> Technical Lead GeoSolutions S.A.S. Via di Montramito 3/A 55054 Massarosa
>> (LU) phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 339 8844549
>> http://www.geo-solutions.it http://twitter.com/geosolutions_it
>> --- *Con riferimento
>> alla normativa sul trattamento dei dati personali (Reg. UE 2016/679 -
>> Regolamento generale sulla protezione dei dati “GDPR”), si precisa che
>> ogni
>> circostanza inerente alla presente email (il suo contenuto, gli eventuali
>> allegati, etc.) è un dato la cui conoscenza è riservata al/i solo/i
>> destinatario/i indicati dallo scrivente. Se il messaggio Le è giunto per
>> errore, è tenuta/o a cancellarlo, ogni altra operazione è illecita. Le
>> sarei comunque grato se potesse darmene notizia. This email is intended
>> only for the person or entity to which it is addressed and may contain
>> information that is privileged, confidential or otherwise protected from
>> disclosure. We remind that - as provided by European Regulation 2016/679
>> “GDPR” - copying, dissemination or use of this e-mail or the information
>> herein by anyone other than the intended recipient is prohibited. If you
>> have received this email by mistake, please notify us immediately by
>> telephone or e-mail.*
>>
>>
>>
>> 
>> --
>> Check out the vibrant tech community on one of the world's most
>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>>
>>
>>
>> ___
>> Geoserver-devel mailing list
>> Geoserver-devel@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/geoserver-devel
>>
>>
> --
> Ben Caradoc-Davies 
> Director
> Transient Software Limited 
> New Zealand
>



-- 

Regards, Andrea Aime == GeoServer Professional Services from the experts!
Visit http://goo.gl/it488V for more information. == Ing. Andrea Aime
@geowolf Technical Lead GeoSolutions S.A.S. Via di Montramito 3/A 55054
Massarosa (LU) phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 339
8844549 http://www.geo-solutions.it http://twitter.com/geosolutions_it
--- *Con riferimento
alla normativa sul trattamento dei dati personali (Reg. UE 2016/679 -
Regolamento generale sulla protezione dei dati “GDPR”), si precisa che ogni
circostanza inerente alla presente email (il suo contenuto, gli eventuali
allegati, etc.) è un dato la cui conoscenza è riservata al/i solo/i
destinatario/i indicati dallo scrivente. Se il messaggio Le è giunto per
errore, è tenuta/o a cancellarlo, ogni altra operazione è illecita. Le
sarei comunque grato se potesse darmene notizia. This email is intended
only for the person or entity to which it is addressed and may contain
information that is privileged, confidential or otherwise protected from
disclosure. We remind that - as provided by European Regulation 2016/679
“GDPR” - copying, dissemination or use of this e-mail or the information
herein by anyone other than the intended recipient is prohibited. If you
have received this email by mistake, please notify us immediately by
telephone or e-mail.*
--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot___
Geoserver-devel mailing list

Re: [Geoserver-devel] You have been... ref0rmatt3d!

2018-06-11 Thread Ben Caradoc-Davies 

Andrea,

"-Dfmt.action=check" was applied only to the community build because the 
Travis CI script line is two commands separated by "&&" and 
"-Dfmt.action=check" was only appended to the script line. I have added 
"-Dfmt.action=check" to the first (main build) command on master, 
2.13.x, and 2.12.x. We should close-reopen pull requests to ensure that 
their formatting is checked.


Kind regards,
Ben.

On 10/06/18 02:25, Andrea Aime wrote:

Hi all,
as agreed, the big bad reformat landed on master, 2.13.x and 2.12.x.

Back to normal business for everybody :-)

And oh, I've modified the setup so that on Travis it won't check for local
modifications, but directly
for faulty formatting (the error message should be easier to understand).
The Jenkins builds are also following the same settings

Oh, I've noticed there is a newer version of the formatting plugin, but as
far as I could tell,
it was not fixing any bug of significant, while it was changing the
formatting rules for annotations a bit,
changing several files. I skipped this upgrade to avoid adding extra noise
on the commit history...
if need be, we can revisit and upgrade later I guess

Cheers
Andrea

== GeoServer Professional Services from the experts! Visit
http://goo.gl/it488V for more information. == Ing. Andrea Aime @geowolf
Technical Lead GeoSolutions S.A.S. Via di Montramito 3/A 55054 Massarosa
(LU) phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 339 8844549
http://www.geo-solutions.it http://twitter.com/geosolutions_it
--- *Con riferimento
alla normativa sul trattamento dei dati personali (Reg. UE 2016/679 -
Regolamento generale sulla protezione dei dati “GDPR”), si precisa che ogni
circostanza inerente alla presente email (il suo contenuto, gli eventuali
allegati, etc.) è un dato la cui conoscenza è riservata al/i solo/i
destinatario/i indicati dallo scrivente. Se il messaggio Le è giunto per
errore, è tenuta/o a cancellarlo, ogni altra operazione è illecita. Le
sarei comunque grato se potesse darmene notizia. This email is intended
only for the person or entity to which it is addressed and may contain
information that is privileged, confidential or otherwise protected from
disclosure. We remind that - as provided by European Regulation 2016/679
“GDPR” - copying, dissemination or use of this e-mail or the information
herein by anyone other than the intended recipient is prohibited. If you
have received this email by mistake, please notify us immediately by
telephone or e-mail.*



--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot



___
Geoserver-devel mailing list
Geoserver-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/geoserver-devel



--
Ben Caradoc-Davies 
Director
Transient Software Limited 
New Zealand

--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
___
Geoserver-devel mailing list
Geoserver-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/geoserver-devel

Re: [Geoserver-devel] You have been... ref0rmatt3d!

2018-06-09 Thread Nuno Oliveira 

Good news, thank you Andrea !

On 06/09/2018 03:25 PM, Andrea Aime wrote:

Hi all,
as agreed, the big bad reformat landed on master, 2.13.x and 2.12.x.

Back to normal business for everybody :-)

And oh, I've modified the setup so that on Travis it won't check for local 
modifications, but directly

for faulty formatting (the error message should be easier to understand).
The Jenkins builds are also following the same settings

Oh, I've noticed there is a newer version of the formatting plugin, but as far 
as I could tell,
it was not fixing any bug of significant, while it was changing the formatting 
rules for annotations a bit,
changing several files. I skipped this upgrade to avoid adding extra noise on 
the commit history...

if need be, we can revisit and upgrade later I guess

Cheers
Andrea

== GeoServer Professional Services from the experts! Visit 
http://goo.gl/it488V for more information. == Ing. Andrea Aime @geowolf 
Technical Lead GeoSolutions S.A.S. Via di Montramito 3/A 55054 Massarosa (LU) 
phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 339 8844549 
http://www.geo-solutions.it http://twitter.com/geosolutions_it 
--- /Con riferimento alla 
normativa sul trattamento dei dati personali (Reg. UE 2016/679 - Regolamento 
generale sulla protezione dei dati “GDPR”), si precisa che ogni circostanza 
inerente alla presente email (il suo contenuto, gli eventuali allegati, etc.) 
è un dato la cui conoscenza è riservata al/i solo/i destinatario/i indicati 
dallo scrivente. Se il messaggio Le è giunto per errore, è tenuta/o a 
cancellarlo, ogni altra operazione è illecita. Le sarei comunque grato se 
potesse darmene notizia. This email is intended only for the person or entity 
to which it is addressed and may contain information that is privileged, 
confidential or otherwise protected from disclosure. We remind that - as 
provided by European Regulation 2016/679 “GDPR” - copying, dissemination or 
use of this e-mail or the information herein by anyone other than the intended 
recipient is prohibited. If you have received this email by mistake, please 
notify us immediately by telephone or e-mail./




--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot


___
Geoserver-devel mailing list
Geoserver-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/geoserver-devel


--
Regards,
Nuno Oliveira
==
GeoServer Professional Services from the experts!
Visit http://goo.gl/it488V for more information.
==

Nuno Miguel Carvalho Oliveira
@nmcoliveira
Software Engineer

GeoSolutions S.A.S.
Via di Montramito 3/A
55054  Massarosa (LU)
Italy
phone: +39 0584 962313
fax:  +39 0584 1660272

http://www.geo-solutions.it
http://twitter.com/geosolutions_it

---

Con riferimento alla normativa sul trattamento dei dati
personali (Reg. UE 2016/679 - Regolamento generale sulla
protezione dei dati “GDPR”), si precisa che ogni
circostanza inerente alla presente email (il suo contenuto,
gli eventuali allegati, etc.) è un dato la cui conoscenza
è riservata al/i solo/i destinatario/i indicati dallo
scrivente. Se il messaggio Le è giunto per errore, è
tenuta/o a cancellarlo, ogni altra operazione è illecita.
Le sarei comunque grato se potesse darmene notizia.

This email is intended only for the person or entity to
which it is addressed and may contain information that
is privileged, confidential or otherwise protected from
disclosure. We remind that - as provided by European
Regulation 2016/679 “GDPR” - copying, dissemination or
use of this e-mail or the information herein by anyone
other than the intended recipient is prohibited. If you
have received this email by mistake, please notify
us immediately by telephone or e-mail.

--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot___
Geoserver-devel mailing list
Geoserver-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/geoserver-devel