Change in osmo-ttcn3-hacks[master]: fix mscpool cleanup (fixes LCLS tests)
fixeria has posted comments on this change. ( https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/19554 ) Change subject: fix mscpool cleanup (fixes LCLS tests) .. Patch Set 2: Code-Review+1 -- To view, visit https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/19554 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-ttcn3-hacks Gerrit-Branch: master Gerrit-Change-Id: I02ad58ed7d0d0aac61e393b415e09c6c5c8a70ca Gerrit-Change-Number: 19554 Gerrit-PatchSet: 2 Gerrit-Owner: neels Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: fixeria Gerrit-Reviewer: neels Gerrit-Comment-Date: Mon, 10 Aug 2020 03:22:11 + Gerrit-HasComments: No Gerrit-Has-Labels: Yes Gerrit-MessageType: comment
Build failure of network:osmocom:nightly/simtrace2 in Debian_9.0/armv7l
Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/simtrace2/Debian_9.0/armv7l Package network:osmocom:nightly/simtrace2 failed to build in Debian_9.0/armv7l Check out the package for editing: osc checkout network:osmocom:nightly simtrace2 Last lines of build log: [ 267s] [COMPILING libboard/qmod/source/i2c.c] [ 268s] [COMPILING libboard/qmod/source/board_qmod.c] [ 268s] [COMPILING apps/dfu/main.c] [ 269s] [COMPILING ./atmel_softpack_libraries/usb/device/dfu/dfu.c] [ 269s] [COMPILING ./atmel_softpack_libraries/usb/device/dfu/dfu_desc.c] [ 269s] [COMPILING ./atmel_softpack_libraries/usb/device/dfu/dfu_driver.c] [ 270s] Memory region Used Size Region Size %age Used [ 270s] rom: 16584 B16 KB101.22% [ 270s] ram: 11672 B48 KB 23.75/usr/lib/gcc/arm-none-eabi/5.4.1/../../../arm-none-eabi/bin/ld: bin/qmod-dfu-flash.elf section `.text' will not fit in region `rom' [ 270s] /usr/lib/gcc/arm-none-eabi/5.4.1/../../../arm-none-eabi/bin/ld: region `rom' overflowed by 200 bytes [ 270s] collect2: error: ld returned 1 exit status [ 270s] % [ 270s] Makefile:234: recipe for target 'flash' failed [ 270s] make[2]: *** [flash] Error 1 [ 270s] make[2]: Leaving directory '/usr/src/packages/BUILD/firmware' [ 270s] Makefile:13: recipe for target 'fw-qmod-dfu' failed [ 270s] make[1]: *** [fw-qmod-dfu] Error 2 [ 270s] make[1]: Leaving directory '/usr/src/packages/BUILD' [ 270s] dh_auto_build: make -j1 returned exit code 2 [ 270s] debian/rules:16: recipe for target 'build' failed [ 270s] make: *** [build] Error 2 [ 270s] dpkg-buildpackage: error: debian/rules build gave error exit status 2 [ 270s] ### VM INTERACTION START ### [ 273s] [ 250.721845] sysrq: SysRq : Power Off [ 273s] [ 250.727171] reboot: Power down [ 273s] ### VM INTERACTION END ### [ 273s] [ 273s] armbuild01 failed "build simtrace2_0.7.0.61.1afb7.dsc" at Mon Aug 10 03:17:38 UTC 2020. [ 273s] -- Configure notifications at https://build.opensuse.org/my/subscriptions openSUSE Build Service (https://build.opensuse.org/)
Change in osmo-ttcn3-hacks[master]: f_vty_transceive: allow to ignore unknown vty commands
fixeria has posted comments on this change. ( https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/19555 ) Change subject: f_vty_transceive: allow to ignore unknown vty commands .. Patch Set 1: Code-Review+1 -- To view, visit https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/19555 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-ttcn3-hacks Gerrit-Branch: master Gerrit-Change-Id: I284c42e10c0cb282c8410db87959b471867edef6 Gerrit-Change-Number: 19555 Gerrit-PatchSet: 1 Gerrit-Owner: neels Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: fixeria Gerrit-Comment-Date: Mon, 10 Aug 2020 03:08:49 + Gerrit-HasComments: No Gerrit-Has-Labels: Yes Gerrit-MessageType: comment
Build failure of network:osmocom:nightly/simtrace2 in Raspbian_10/armv7l
Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/simtrace2/Raspbian_10/armv7l Package network:osmocom:nightly/simtrace2 failed to build in Raspbian_10/armv7l Check out the package for editing: osc checkout network:osmocom:nightly simtrace2 Last lines of build log: [ 362s] [COMPILING libboard/qmod/source/wwan_perst.c] [ 362s] [COMPILING libboard/qmod/source/card_pres.c] [ 362s] [COMPILING libboard/qmod/source/wwan_led.c] [ 363s] [COMPILING libboard/qmod/source/i2c.c] [ 363s] [COMPILING libboard/qmod/source/board_qmod.c] [ 363s] [COMPILING apps/dfu/main.c] [ 363s] [COMPILING ./atmel_softpack_libraries/usb/device/dfu/dfu.c] [ 364s] [COMPILING ./atmel_softpack_libraries/usb/device/dfu/dfu_desc.c] [ 364s] [COMPILING ./atmel_softpack_libraries/usb/device/dfu/dfu_driver.c] [ 364s] Memory region Used Size Region Size %age Used [ 364s] rom: 16504 B16 KB100.73% [ 364s] ram: 11672 B48 KB 23.75/usr/lib/gcc/arm-none-eabi/7.3.1/../../../arm-none-eabi/bin/ld: bin/qmod-dfu-flash.elf section `.text' will not fit in region `rom' [ 364s] /usr/lib/gcc/arm-none-eabi/7.3.1/../../../arm-none-eabi/bin/ld: region `rom' overflowed by 120 bytes [ 364s] collect2: error: ld returned 1 exit status [ 364s] % [ 364s] make[2]: *** [Makefile:234: flash] Error 1 [ 364s] make[2]: Leaving directory '/usr/src/packages/BUILD/firmware' [ 364s] make[1]: *** [Makefile:13: fw-qmod-dfu] Error 2 [ 364s] make[1]: Leaving directory '/usr/src/packages/BUILD' [ 364s] dh_auto_build: make -j1 returned exit code 2 [ 364s] make: *** [debian/rules:16: build] Error 2 [ 364s] dpkg-buildpackage: error: debian/rules build subprocess returned exit status 2 [ 364s] ### VM INTERACTION START ### [ 367s] [ 345.111908] sysrq: SysRq : Power Off [ 367s] [ 345.115011] reboot: Power down [ 368s] ### VM INTERACTION END ### [ 368s] [ 368s] obs-arm-5 failed "build simtrace2_0.7.0.61.1afb7.dsc" at Mon Aug 10 03:05:07 UTC 2020. [ 368s] -- Configure notifications at https://build.opensuse.org/my/subscriptions openSUSE Build Service (https://build.opensuse.org/)
Build failure of network:osmocom:nightly/simtrace2 in Debian_10/armv7l
Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/simtrace2/Debian_10/armv7l Package network:osmocom:nightly/simtrace2 failed to build in Debian_10/armv7l Check out the package for editing: osc checkout network:osmocom:nightly simtrace2 Last lines of build log: [ 239s] [COMPILING libboard/qmod/source/wwan_perst.c] [ 239s] [COMPILING libboard/qmod/source/card_pres.c] [ 240s] [COMPILING libboard/qmod/source/wwan_led.c] [ 240s] [COMPILING libboard/qmod/source/i2c.c] [ 240s] [COMPILING libboard/qmod/source/board_qmod.c] [ 241s] [COMPILING apps/dfu/main.c] [ 241s] [COMPILING ./atmel_softpack_libraries/usb/device/dfu/dfu.c] [ 241s] [COMPILING ./atmel_softpack_libraries/usb/device/dfu/dfu_desc.c] [ 242s] [COMPILING ./atmel_softpack_libraries/usb/device/dfu/dfu_driver.c] [ 242s] Memory region Used Size Region Size %age Used [ 242s] rom: 16504 B16 KB100.73% [ 242s] ram: 11672 B48 KB 23.75/usr/lib/gcc/arm-none-eabi/7.3.1/../../../arm-none-eabi/bin/ld: bin/qmod-dfu-flash.elf section `.text' will not fit in region `rom' [ 242s] /usr/lib/gcc/arm-none-eabi/7.3.1/../../../arm-none-eabi/bin/ld: region `rom' overflowed by 120 bytes [ 242s] collect2: error: ld returned 1 exit status [ 242s] % [ 242s] make[2]: *** [Makefile:234: flash] Error 1 [ 242s] make[2]: Leaving directory '/usr/src/packages/BUILD/firmware' [ 242s] make[1]: *** [Makefile:13: fw-qmod-dfu] Error 2 [ 242s] make[1]: Leaving directory '/usr/src/packages/BUILD' [ 242s] dh_auto_build: make -j1 returned exit code 2 [ 242s] make: *** [debian/rules:16: build] Error 2 [ 242s] dpkg-buildpackage: error: debian/rules build subprocess returned exit status 2 [ 242s] ### VM INTERACTION START ### [ 245s] [ 211.385205] sysrq: SysRq : Power Off [ 245s] [ 211.386396] reboot: Power down [ 245s] ### VM INTERACTION END ### [ 245s] [ 245s] armbuild01 failed "build simtrace2_0.7.0.61.1afb7.dsc" at Mon Aug 10 02:50:43 UTC 2020. [ 245s] -- Configure notifications at https://build.opensuse.org/my/subscriptions openSUSE Build Service (https://build.opensuse.org/)
Build failure of network:osmocom:nightly/simtrace2 in Debian_9.0/aarch64
Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/simtrace2/Debian_9.0/aarch64 Package network:osmocom:nightly/simtrace2 failed to build in Debian_9.0/aarch64 Check out the package for editing: osc checkout network:osmocom:nightly simtrace2 Last lines of build log: [ 115s] [COMPILING libboard/qmod/source/i2c.c] [ 115s] [COMPILING libboard/qmod/source/board_qmod.c] [ 115s] [COMPILING apps/dfu/main.c] [ 115s] [COMPILING ./atmel_softpack_libraries/usb/device/dfu/dfu.c] [ 115s] [COMPILING ./atmel_softpack_libraries/usb/device/dfu/dfu_desc.c] [ 116s] [COMPILING ./atmel_softpack_libraries/usb/device/dfu/dfu_driver.c] [ 116s] Memory region Used Size Region Size %age Used [ 116s] rom: 16584 B16 KB101.22% [ 116s] ram: 11672 B48 KB 23.75/usr/lib/gcc/arm-none-eabi/5.4.1/../../../arm-none-eabi/bin/ld: bin/qmod-dfu-flash.elf section `.text' will not fit in region `rom' [ 116s] /usr/lib/gcc/arm-none-eabi/5.4.1/../../../arm-none-eabi/bin/ld: region `rom' overflowed by 200 bytes [ 116s] collect2: error: ld returned 1 exit status [ 116s] % [ 116s] Makefile:234: recipe for target 'flash' failed [ 116s] make[2]: *** [flash] Error 1 [ 116s] make[2]: Leaving directory '/usr/src/packages/BUILD/firmware' [ 116s] Makefile:13: recipe for target 'fw-qmod-dfu' failed [ 116s] make[1]: *** [fw-qmod-dfu] Error 2 [ 116s] make[1]: Leaving directory '/usr/src/packages/BUILD' [ 116s] dh_auto_build: make -j1 returned exit code 2 [ 116s] debian/rules:16: recipe for target 'build' failed [ 116s] make: *** [build] Error 2 [ 116s] dpkg-buildpackage: error: debian/rules build gave error exit status 2 [ 116s] ### VM INTERACTION START ### [ 119s] [ 107.484886] sysrq: Power Off [ 119s] [ 107.485970] reboot: Power down [ 119s] ### VM INTERACTION END ### [ 119s] [ 119s] obs-arm-8 failed "build simtrace2_0.7.0.61.1afb7.dsc" at Mon Aug 10 01:42:12 UTC 2020. [ 119s] -- Configure notifications at https://build.opensuse.org/my/subscriptions openSUSE Build Service (https://build.opensuse.org/)
Build failure of network:osmocom:nightly/simtrace2 in Debian_10/aarch64
Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/simtrace2/Debian_10/aarch64 Package network:osmocom:nightly/simtrace2 failed to build in Debian_10/aarch64 Check out the package for editing: osc checkout network:osmocom:nightly simtrace2 Last lines of build log: [ 116s] [COMPILING libboard/qmod/source/wwan_perst.c] [ 116s] [COMPILING libboard/qmod/source/card_pres.c] [ 117s] [COMPILING libboard/qmod/source/wwan_led.c] [ 117s] [COMPILING libboard/qmod/source/i2c.c] [ 117s] [COMPILING libboard/qmod/source/board_qmod.c] [ 117s] [COMPILING apps/dfu/main.c] [ 117s] [COMPILING ./atmel_softpack_libraries/usb/device/dfu/dfu.c] [ 117s] [COMPILING ./atmel_softpack_libraries/usb/device/dfu/dfu_desc.c] [ 117s] [COMPILING ./atmel_softpack_libraries/usb/device/dfu/dfu_driver.c] [ 118s] Memory region Used Size Region Size %age Used [ 118s] rom: 16504 B16 KB100.73% [ 118s] ram: 11672 B48 KB 23.75/usr/lib/gcc/arm-none-eabi/7.3.1/../../../arm-none-eabi/bin/ld: bin/qmod-dfu-flash.elf section `.text' will not fit in region `rom' [ 118s] /usr/lib/gcc/arm-none-eabi/7.3.1/../../../arm-none-eabi/bin/ld: region `rom' overflowed by 120 bytes [ 118s] collect2: error: ld returned 1 exit status [ 118s] % [ 118s] make[2]: *** [Makefile:234: flash] Error 1 [ 118s] make[2]: Leaving directory '/usr/src/packages/BUILD/firmware' [ 118s] make[1]: *** [Makefile:13: fw-qmod-dfu] Error 2 [ 118s] make[1]: Leaving directory '/usr/src/packages/BUILD' [ 118s] dh_auto_build: make -j1 returned exit code 2 [ 118s] make: *** [debian/rules:16: build] Error 2 [ 118s] dpkg-buildpackage: error: debian/rules build subprocess returned exit status 2 [ 118s] ### VM INTERACTION START ### [ 121s] [ 111.600493] sysrq: Power Off [ 121s] [ 111.601525] reboot: Power down [ 121s] ### VM INTERACTION END ### [ 121s] [ 121s] obs-arm-9 failed "build simtrace2_0.7.0.61.1afb7.dsc" at Mon Aug 10 01:41:27 UTC 2020. [ 121s] -- Configure notifications at https://build.opensuse.org/my/subscriptions openSUSE Build Service (https://build.opensuse.org/)
Build failure of network:osmocom:nightly/simtrace2 in Debian_Unstable/x86_64
Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/simtrace2/Debian_Unstable/x86_64 Package network:osmocom:nightly/simtrace2 failed to build in Debian_Unstable/x86_64 Check out the package for editing: osc checkout network:osmocom:nightly simtrace2 Last lines of build log: [ 123s] [COMPILING apps/dfu/main.c] [ 123s] [COMPILING ./atmel_softpack_libraries/usb/device/dfu/dfu.c] [ 123s] [COMPILING ./atmel_softpack_libraries/usb/device/dfu/dfu_desc.c] [ 123s] [COMPILING ./atmel_softpack_libraries/usb/device/dfu/dfu_driver.c] [ 123s] Memory region Used Size Region Size %age Used [ 123s] rom: 16464 B16 KB100.49% [ 123s] ram: 11672 B48 KB 23.75/usr/lib/gcc/arm-none-eabi/8.3.1/../../../arm-none-eabi/bin/ld: warning: changing start of section .stack by 4 bytes [ 123s] /usr/lib/gcc/arm-none-eabi/8.3.1/../../../arm-none-eabi/bin/ld: warning: changing start of section .stack by 4 bytes [ 123s] /usr/lib/gcc/arm-none-eabi/8.3.1/../../../arm-none-eabi/bin/ld: bin/qmod-dfu-flash.elf section `.text' will not fit in region `rom' [ 123s] /usr/lib/gcc/arm-none-eabi/8.3.1/../../../arm-none-eabi/bin/ld: warning: changing start of section .stack by 4 bytes [ 123s] /usr/lib/gcc/arm-none-eabi/8.3.1/../../../arm-none-eabi/bin/ld: warning: changing start of section .stack by 4 bytes [ 123s] /usr/lib/gcc/arm-none-eabi/8.3.1/../../../arm-none-eabi/bin/ld: warning: changing start of section .stack by 4 bytes [ 123s] /usr/lib/gcc/arm-none-eabi/8.3.1/../../../arm-none-eabi/bin/ld: region `rom' overflowed by 80 bytes [ 123s] collect2: error: ld returned 1 exit status [ 123s] % [ 123s] make[2]: *** [Makefile:234: flash] Error 1 [ 123s] make[2]: Leaving directory '/usr/src/packages/BUILD/firmware' [ 123s] make[1]: *** [Makefile:13: fw-qmod-dfu] Error 2 [ 123s] make[1]: Leaving directory '/usr/src/packages/BUILD' [ 123s] dh_auto_build: error: make -j1 returned exit code 2 [ 123s] make: *** [debian/rules:16: build] Error 25 [ 123s] dpkg-buildpackage: error: debian/rules build subprocess returned exit status 2 [ 123s] ### VM INTERACTION START ### [ 126s] [ 115.992962] sysrq: Power Off [ 127s] [ 115.995341] reboot: Power down [ 127s] ### VM INTERACTION END ### [ 127s] [ 127s] old-atreju5 failed "build simtrace2_0.7.0.61.1afb7.dsc" at Mon Aug 10 01:38:59 UTC 2020. [ 127s] -- Configure notifications at https://build.opensuse.org/my/subscriptions openSUSE Build Service (https://build.opensuse.org/)
Build failure of network:osmocom:nightly/simtrace2 in Debian_Testing/x86_64
Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/simtrace2/Debian_Testing/x86_64 Package network:osmocom:nightly/simtrace2 failed to build in Debian_Testing/x86_64 Check out the package for editing: osc checkout network:osmocom:nightly simtrace2 Last lines of build log: [ 146s] [COMPILING apps/dfu/main.c] [ 146s] [COMPILING ./atmel_softpack_libraries/usb/device/dfu/dfu.c] [ 146s] [COMPILING ./atmel_softpack_libraries/usb/device/dfu/dfu_desc.c] [ 146s] [COMPILING ./atmel_softpack_libraries/usb/device/dfu/dfu_driver.c] [ 147s] Memory region Used Size Region Size %age Used [ 147s] rom: 16464 B16 KB100.49% [ 147s] ram: 11672 B48 KB 23.75/usr/lib/gcc/arm-none-eabi/8.3.1/../../../arm-none-eabi/bin/ld: warning: changing start of section .stack by 4 bytes [ 147s] /usr/lib/gcc/arm-none-eabi/8.3.1/../../../arm-none-eabi/bin/ld: warning: changing start of section .stack by 4 bytes [ 147s] /usr/lib/gcc/arm-none-eabi/8.3.1/../../../arm-none-eabi/bin/ld: bin/qmod-dfu-flash.elf section `.text' will not fit in region `rom' [ 147s] /usr/lib/gcc/arm-none-eabi/8.3.1/../../../arm-none-eabi/bin/ld: warning: changing start of section .stack by 4 bytes [ 147s] /usr/lib/gcc/arm-none-eabi/8.3.1/../../../arm-none-eabi/bin/ld: warning: changing start of section .stack by 4 bytes [ 147s] /usr/lib/gcc/arm-none-eabi/8.3.1/../../../arm-none-eabi/bin/ld: warning: changing start of section .stack by 4 bytes [ 147s] /usr/lib/gcc/arm-none-eabi/8.3.1/../../../arm-none-eabi/bin/ld: region `rom' overflowed by 80 bytes [ 147s] collect2: error: ld returned 1 exit status [ 147s] % [ 147s] make[2]: *** [Makefile:234: flash] Error 1 [ 147s] make[2]: Leaving directory '/usr/src/packages/BUILD/firmware' [ 147s] make[1]: *** [Makefile:13: fw-qmod-dfu] Error 2 [ 147s] make[1]: Leaving directory '/usr/src/packages/BUILD' [ 147s] dh_auto_build: error: make -j1 returned exit code 2 [ 147s] make: *** [debian/rules:16: build] Error 25 [ 147s] dpkg-buildpackage: error: debian/rules build subprocess returned exit status 2 [ 147s] ### VM INTERACTION START ### [ 150s] [ 140.454108] sysrq: Power Off [ 150s] [ 140.461134] reboot: Power down [ 150s] ### VM INTERACTION END ### [ 150s] [ 150s] lamb69 failed "build simtrace2_0.7.0.61.1afb7.dsc" at Mon Aug 10 01:39:28 UTC 2020. [ 150s] -- Configure notifications at https://build.opensuse.org/my/subscriptions openSUSE Build Service (https://build.opensuse.org/)
Build failure of network:osmocom:nightly/simtrace2 in Debian_10/x86_64
Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/simtrace2/Debian_10/x86_64 Package network:osmocom:nightly/simtrace2 failed to build in Debian_10/x86_64 Check out the package for editing: osc checkout network:osmocom:nightly simtrace2 Last lines of build log: [ 138s] [COMPILING libboard/qmod/source/wwan_perst.c] [ 138s] [COMPILING libboard/qmod/source/card_pres.c] [ 138s] [COMPILING libboard/qmod/source/wwan_led.c] [ 138s] [COMPILING libboard/qmod/source/i2c.c] [ 138s] [COMPILING libboard/qmod/source/board_qmod.c] [ 138s] [COMPILING apps/dfu/main.c] [ 138s] [COMPILING ./atmel_softpack_libraries/usb/device/dfu/dfu.c] [ 138s] [COMPILING ./atmel_softpack_libraries/usb/device/dfu/dfu_desc.c] [ 139s] [COMPILING ./atmel_softpack_libraries/usb/device/dfu/dfu_driver.c] [ 139s] Memory region Used Size Region Size %age Used [ 139s] rom: 16504 B16 KB100.73% [ 139s] ram: 11672 B48 KB 23.75/usr/lib/gcc/arm-none-eabi/7.3.1/../../../arm-none-eabi/bin/ld: bin/qmod-dfu-flash.elf section `.text' will not fit in region `rom' [ 139s] /usr/lib/gcc/arm-none-eabi/7.3.1/../../../arm-none-eabi/bin/ld: region `rom' overflowed by 120 bytes [ 139s] collect2: error: ld returned 1 exit status [ 139s] % [ 139s] make[2]: *** [Makefile:234: flash] Error 1 [ 139s] make[2]: Leaving directory '/usr/src/packages/BUILD/firmware' [ 139s] make[1]: *** [Makefile:13: fw-qmod-dfu] Error 2 [ 139s] make[1]: Leaving directory '/usr/src/packages/BUILD' [ 139s] dh_auto_build: make -j1 returned exit code 2 [ 139s] make: *** [debian/rules:16: build] Error 2 [ 139s] dpkg-buildpackage: error: debian/rules build subprocess returned exit status 2 [ 139s] ### VM INTERACTION START ### [ 142s] [ 133.747495] sysrq: Power Off [ 142s] [ 133.754081] reboot: Power down [ 142s] ### VM INTERACTION END ### [ 142s] [ 142s] lamb03 failed "build simtrace2_0.7.0.61.1afb7.dsc" at Mon Aug 10 01:39:28 UTC 2020. [ 142s] -- Configure notifications at https://build.opensuse.org/my/subscriptions openSUSE Build Service (https://build.opensuse.org/)
Build failure of network:osmocom:nightly/simtrace2 in Debian_10/i586
Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/simtrace2/Debian_10/i586 Package network:osmocom:nightly/simtrace2 failed to build in Debian_10/i586 Check out the package for editing: osc checkout network:osmocom:nightly simtrace2 Last lines of build log: [ 142s] [COMPILING libboard/qmod/source/wwan_perst.c] [ 142s] [COMPILING libboard/qmod/source/card_pres.c] [ 142s] [COMPILING libboard/qmod/source/wwan_led.c] [ 142s] [COMPILING libboard/qmod/source/i2c.c] [ 143s] [COMPILING libboard/qmod/source/board_qmod.c] [ 143s] [COMPILING apps/dfu/main.c] [ 143s] [COMPILING ./atmel_softpack_libraries/usb/device/dfu/dfu.c] [ 143s] [COMPILING ./atmel_softpack_libraries/usb/device/dfu/dfu_desc.c] [ 143s] [COMPILING ./atmel_softpack_libraries/usb/device/dfu/dfu_driver.c] [ 143s] Memory region Used Size Region Size %age Used [ 143s] rom: 16504 B16 KB100.73% [ 143s] ram: 11672 B48 KB 23.75/usr/lib/gcc/arm-none-eabi/7.3.1/../../../arm-none-eabi/bin/ld: bin/qmod-dfu-flash.elf section `.text' will not fit in region `rom' [ 143s] /usr/lib/gcc/arm-none-eabi/7.3.1/../../../arm-none-eabi/bin/ld: region `rom' overflowed by 120 bytes [ 143s] collect2: error: ld returned 1 exit status [ 143s] % [ 143s] make[2]: *** [Makefile:234: flash] Error 1 [ 143s] make[2]: Leaving directory '/usr/src/packages/BUILD/firmware' [ 143s] make[1]: *** [Makefile:13: fw-qmod-dfu] Error 2 [ 143s] make[1]: Leaving directory '/usr/src/packages/BUILD' [ 143s] dh_auto_build: make -j1 returned exit code 2 [ 143s] make: *** [debian/rules:16: build] Error 2 [ 143s] dpkg-buildpackage: error: debian/rules build subprocess returned exit status 2 [ 143s] ### VM INTERACTION START ### [ 146s] [ 138.772446] sysrq: Power Off [ 146s] [ 138.782932] reboot: Power down [ 147s] ### VM INTERACTION END ### [ 147s] [ 147s] lamb58 failed "build simtrace2_0.7.0.61.1afb7.dsc" at Mon Aug 10 01:37:25 UTC 2020. [ 147s] -- Configure notifications at https://build.opensuse.org/my/subscriptions openSUSE Build Service (https://build.opensuse.org/)
Build failure of network:osmocom:nightly/simtrace2 in Debian_9.0/x86_64
Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/simtrace2/Debian_9.0/x86_64 Package network:osmocom:nightly/simtrace2 failed to build in Debian_9.0/x86_64 Check out the package for editing: osc checkout network:osmocom:nightly simtrace2 Last lines of build log: [ 95s] [COMPILING libboard/qmod/source/i2c.c] [ 95s] [COMPILING libboard/qmod/source/board_qmod.c] [ 95s] [COMPILING apps/dfu/main.c] [ 95s] [COMPILING ./atmel_softpack_libraries/usb/device/dfu/dfu.c] [ 96s] [COMPILING ./atmel_softpack_libraries/usb/device/dfu/dfu_desc.c] [ 96s] [COMPILING ./atmel_softpack_libraries/usb/device/dfu/dfu_driver.c] [ 96s] Memory region Used Size Region Size %age Used [ 96s] rom: 16584 B16 KB101.22% [ 96s] ram: 11672 B48 KB 23.75/usr/lib/gcc/arm-none-eabi/5.4.1/../../../arm-none-eabi/bin/ld: bin/qmod-dfu-flash.elf section `.text' will not fit in region `rom' [ 96s] /usr/lib/gcc/arm-none-eabi/5.4.1/../../../arm-none-eabi/bin/ld: region `rom' overflowed by 200 bytes [ 96s] collect2: error: ld returned 1 exit status [ 96s] % [ 96s] Makefile:234: recipe for target 'flash' failed [ 96s] make[2]: *** [flash] Error 1 [ 96s] make[2]: Leaving directory '/usr/src/packages/BUILD/firmware' [ 96s] Makefile:13: recipe for target 'fw-qmod-dfu' failed [ 96s] make[1]: *** [fw-qmod-dfu] Error 2 [ 96s] make[1]: Leaving directory '/usr/src/packages/BUILD' [ 96s] dh_auto_build: make -j1 returned exit code 2 [ 96s] debian/rules:16: recipe for target 'build' failed [ 96s] make: *** [build] Error 2 [ 96s] dpkg-buildpackage: error: debian/rules build gave error exit status 2 [ 96s] ### VM INTERACTION START ### [ 99s] [ 92.417017] sysrq: Power Off [ 99s] [ 92.423711] reboot: Power down [ 99s] ### VM INTERACTION END ### [ 99s] [ 99s] lamb26 failed "build simtrace2_0.7.0.61.1afb7.dsc" at Mon Aug 10 01:38:14 UTC 2020. [ 99s] -- Configure notifications at https://build.opensuse.org/my/subscriptions openSUSE Build Service (https://build.opensuse.org/)
Build failure of network:osmocom:nightly/simtrace2 in Debian_9.0/i586
Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/simtrace2/Debian_9.0/i586 Package network:osmocom:nightly/simtrace2 failed to build in Debian_9.0/i586 Check out the package for editing: osc checkout network:osmocom:nightly simtrace2 Last lines of build log: [ 96s] [COMPILING libboard/qmod/source/i2c.c] [ 97s] [COMPILING libboard/qmod/source/board_qmod.c] [ 97s] [COMPILING apps/dfu/main.c] [ 97s] [COMPILING ./atmel_softpack_libraries/usb/device/dfu/dfu.c] [ 97s] [COMPILING ./atmel_softpack_libraries/usb/device/dfu/dfu_desc.c] [ 97s] [COMPILING ./atmel_softpack_libraries/usb/device/dfu/dfu_driver.c] [ 97s] Memory region Used Size Region Size %age Used [ 97s] rom: 16584 B16 KB101.22% [ 97s] ram: 11672 B48 KB 23.75/usr/lib/gcc/arm-none-eabi/5.4.1/../../../arm-none-eabi/bin/ld: bin/qmod-dfu-flash.elf section `.text' will not fit in region `rom' [ 97s] /usr/lib/gcc/arm-none-eabi/5.4.1/../../../arm-none-eabi/bin/ld: region `rom' overflowed by 200 bytes [ 97s] collect2: error: ld returned 1 exit status [ 97s] % [ 97s] Makefile:234: recipe for target 'flash' failed [ 97s] make[2]: *** [flash] Error 1 [ 97s] make[2]: Leaving directory '/usr/src/packages/BUILD/firmware' [ 97s] Makefile:13: recipe for target 'fw-qmod-dfu' failed [ 97s] make[1]: *** [fw-qmod-dfu] Error 2 [ 97s] make[1]: Leaving directory '/usr/src/packages/BUILD' [ 97s] dh_auto_build: make -j1 returned exit code 2 [ 97s] debian/rules:16: recipe for target 'build' failed [ 97s] make: *** [build] Error 2 [ 97s] dpkg-buildpackage: error: debian/rules build gave error exit status 2 [ 97s] ### VM INTERACTION START ### [ 100s] [ 93.620507] sysrq: Power Off [ 100s] [ 93.627994] reboot: Power down [ 100s] ### VM INTERACTION END ### [ 100s] [ 100s] lamb63 failed "build simtrace2_0.7.0.61.1afb7.dsc" at Mon Aug 10 01:36:48 UTC 2020. [ 100s] -- Configure notifications at https://build.opensuse.org/my/subscriptions openSUSE Build Service (https://build.opensuse.org/)
Build failure of network:osmocom:nightly/simtrace2 in xUbuntu_20.04/x86_64
Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/simtrace2/xUbuntu_20.04/x86_64 Package network:osmocom:nightly/simtrace2 failed to build in xUbuntu_20.04/x86_64 Check out the package for editing: osc checkout network:osmocom:nightly simtrace2 Last lines of build log: [ 124s] [COMPILING libboard/common/source/uart_console.c] [ 124s] [COMPILING libboard/common/source/led.c] [ 124s] [COMPILING libboard/common/source/boardver_adc.c] [ 124s] [COMPILING libboard/common/source/manifest.c] [ 124s] [COMPILING libboard/simtrace/source/board_simtrace.c] [ 125s] [COMPILING apps/dfu/main.c] [ 125s] [COMPILING ./atmel_softpack_libraries/usb/device/dfu/dfu.c] [ 125s] [COMPILING ./atmel_softpack_libraries/usb/device/dfu/dfu_desc.c] [ 125s] [COMPILING ./atmel_softpack_libraries/usb/device/dfu/dfu_driver.c] [ 125s] Memory region Used Size Region Size %age Used [ 125s] rom: 16460 B16 KB100.46% [ 125s] ram: 11664 B48 KB 23.73/usr/lib/gcc/arm-none-eabi/9.2.1/../../../arm-none-eabi/bin/ld: bin/simtrace-dfu-flash.elf section `.text' will not fit in region `rom' [ 125s] /usr/lib/gcc/arm-none-eabi/9.2.1/../../../arm-none-eabi/bin/ld: region `rom' overflowed by 76 bytes [ 125s] collect2: error: ld returned 1 exit status [ 125s] % [ 125s] make[2]: *** [Makefile:234: flash] Error 1 [ 125s] make[2]: Leaving directory '/usr/src/packages/BUILD/firmware' [ 125s] make[1]: *** [Makefile:10: fw-simtrace-dfu] Error 2 [ 125s] make[1]: Leaving directory '/usr/src/packages/BUILD' [ 125s] dh_auto_build: error: make -j1 returned exit code 2 [ 125s] make: *** [debian/rules:16: build] Error 25 [ 125s] dpkg-buildpackage: error: debian/rules build subprocess returned exit status 2 [ 125s] ### VM INTERACTION START ### [ 128s] [ 119.966374] sysrq: Power Off [ 128s] [ 119.973635] reboot: Power down [ 128s] ### VM INTERACTION END ### [ 128s] [ 128s] lamb07 failed "build simtrace2_0.7.0.61.1afb7.dsc" at Mon Aug 10 01:36:52 UTC 2020. [ 128s] -- Configure notifications at https://build.opensuse.org/my/subscriptions openSUSE Build Service (https://build.opensuse.org/)
Build failure of network:osmocom:nightly/simtrace2 in xUbuntu_18.10/i586
Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/simtrace2/xUbuntu_18.10/i586 Package network:osmocom:nightly/simtrace2 failed to build in xUbuntu_18.10/i586 Check out the package for editing: osc checkout network:osmocom:nightly simtrace2 Last lines of build log: [ 135s] [COMPILING libboard/qmod/source/wwan_perst.c] [ 136s] [COMPILING libboard/qmod/source/card_pres.c] [ 136s] [COMPILING libboard/qmod/source/wwan_led.c] [ 136s] [COMPILING libboard/qmod/source/i2c.c] [ 136s] [COMPILING libboard/qmod/source/board_qmod.c] [ 136s] [COMPILING apps/dfu/main.c] [ 136s] [COMPILING ./atmel_softpack_libraries/usb/device/dfu/dfu.c] [ 136s] [COMPILING ./atmel_softpack_libraries/usb/device/dfu/dfu_desc.c] [ 137s] [COMPILING ./atmel_softpack_libraries/usb/device/dfu/dfu_driver.c] [ 137s] Memory region Used Size Region Size %age Used [ 137s] rom: 16576 B16 KB101.17% [ 137s] ram: 11672 B48 KB 23.75/usr/lib/gcc/arm-none-eabi/6.3.1/../../../arm-none-eabi/bin/ld: bin/qmod-dfu-flash.elf section `.text' will not fit in region `rom' [ 137s] /usr/lib/gcc/arm-none-eabi/6.3.1/../../../arm-none-eabi/bin/ld: region `rom' overflowed by 192 bytes [ 137s] collect2: error: ld returned 1 exit status [ 137s] % [ 137s] make[2]: *** [Makefile:234: flash] Error 1 [ 137s] make[2]: Leaving directory '/usr/src/packages/BUILD/firmware' [ 137s] make[1]: *** [Makefile:13: fw-qmod-dfu] Error 2 [ 137s] make[1]: Leaving directory '/usr/src/packages/BUILD' [ 137s] dh_auto_build: make -j1 returned exit code 2 [ 137s] make: *** [debian/rules:16: build] Error 2 [ 137s] dpkg-buildpackage: error: debian/rules build subprocess returned exit status 2 [ 137s] ### VM INTERACTION START ### [ 140s] [ 131.343697] sysrq: Power Off [ 140s] [ 131.348371] reboot: Power down [ 140s] ### VM INTERACTION END ### [ 140s] [ 140s] cloud129 failed "build simtrace2_0.7.0.61.1afb7.dsc" at Mon Aug 10 01:34:31 UTC 2020. [ 140s] -- Configure notifications at https://build.opensuse.org/my/subscriptions openSUSE Build Service (https://build.opensuse.org/)
Build failure of network:osmocom:nightly/simtrace2 in xUbuntu_18.10/x86_64
Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/simtrace2/xUbuntu_18.10/x86_64 Package network:osmocom:nightly/simtrace2 failed to build in xUbuntu_18.10/x86_64 Check out the package for editing: osc checkout network:osmocom:nightly simtrace2 Last lines of build log: [ 133s] [COMPILING libboard/qmod/source/wwan_perst.c] [ 133s] [COMPILING libboard/qmod/source/card_pres.c] [ 133s] [COMPILING libboard/qmod/source/wwan_led.c] [ 133s] [COMPILING libboard/qmod/source/i2c.c] [ 133s] [COMPILING libboard/qmod/source/board_qmod.c] [ 133s] [COMPILING apps/dfu/main.c] [ 134s] [COMPILING ./atmel_softpack_libraries/usb/device/dfu/dfu.c] [ 134s] [COMPILING ./atmel_softpack_libraries/usb/device/dfu/dfu_desc.c] [ 134s] [COMPILING ./atmel_softpack_libraries/usb/device/dfu/dfu_driver.c] [ 134s] Memory region Used Size Region Size %age Used [ 134s] rom: 16576 B16 KB101.17% [ 134s] ram: 11672 B48 KB 23.75/usr/lib/gcc/arm-none-eabi/6.3.1/../../../arm-none-eabi/bin/ld: bin/qmod-dfu-flash.elf section `.text' will not fit in region `rom' [ 134s] /usr/lib/gcc/arm-none-eabi/6.3.1/../../../arm-none-eabi/bin/ld: region `rom' overflowed by 192 bytes [ 134s] collect2: error: ld returned 1 exit status [ 134s] % [ 134s] make[2]: *** [Makefile:234: flash] Error 1 [ 134s] make[2]: Leaving directory '/usr/src/packages/BUILD/firmware' [ 134s] make[1]: *** [Makefile:13: fw-qmod-dfu] Error 2 [ 134s] make[1]: Leaving directory '/usr/src/packages/BUILD' [ 134s] dh_auto_build: make -j1 returned exit code 2 [ 134s] make: *** [debian/rules:16: build] Error 2 [ 134s] dpkg-buildpackage: error: debian/rules build subprocess returned exit status 2 [ 134s] ### VM INTERACTION START ### [ 137s] [ 130.116253] sysrq: Power Off [ 137s] [ 130.122925] reboot: Power down [ 137s] ### VM INTERACTION END ### [ 137s] [ 137s] lamb62 failed "build simtrace2_0.7.0.61.1afb7.dsc" at Mon Aug 10 01:34:58 UTC 2020. [ 137s] -- Configure notifications at https://build.opensuse.org/my/subscriptions openSUSE Build Service (https://build.opensuse.org/)
Build failure of network:osmocom:nightly/simtrace2 in xUbuntu_19.04/x86_64
Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/simtrace2/xUbuntu_19.04/x86_64 Package network:osmocom:nightly/simtrace2 failed to build in xUbuntu_19.04/x86_64 Check out the package for editing: osc checkout network:osmocom:nightly simtrace2 Last lines of build log: [ 136s] [COMPILING libboard/qmod/source/wwan_perst.c] [ 136s] [COMPILING libboard/qmod/source/card_pres.c] [ 136s] [COMPILING libboard/qmod/source/wwan_led.c] [ 137s] [COMPILING libboard/qmod/source/i2c.c] [ 137s] [COMPILING libboard/qmod/source/board_qmod.c] [ 137s] [COMPILING apps/dfu/main.c] [ 137s] [COMPILING ./atmel_softpack_libraries/usb/device/dfu/dfu.c] [ 137s] [COMPILING ./atmel_softpack_libraries/usb/device/dfu/dfu_desc.c] [ 137s] [COMPILING ./atmel_softpack_libraries/usb/device/dfu/dfu_driver.c] [ 137s] Memory region Used Size Region Size %age Used [ 137s] rom: 16504 B16 KB100.73% [ 137s] ram: 11672 B48 KB 23.75/usr/lib/gcc/arm-none-eabi/7.3.1/../../../arm-none-eabi/bin/ld: bin/qmod-dfu-flash.elf section `.text' will not fit in region `rom' [ 137s] /usr/lib/gcc/arm-none-eabi/7.3.1/../../../arm-none-eabi/bin/ld: region `rom' overflowed by 120 bytes [ 137s] collect2: error: ld returned 1 exit status [ 137s] % [ 137s] make[2]: *** [Makefile:234: flash] Error 1 [ 137s] make[2]: Leaving directory '/usr/src/packages/BUILD/firmware' [ 137s] make[1]: *** [Makefile:13: fw-qmod-dfu] Error 2 [ 137s] make[1]: Leaving directory '/usr/src/packages/BUILD' [ 137s] dh_auto_build: make -j1 returned exit code 2 [ 137s] make: *** [debian/rules:16: build] Error 2 [ 137s] dpkg-buildpackage: error: debian/rules build subprocess returned exit status 2 [ 137s] ### VM INTERACTION START ### [ 141s] [ 132.832546] sysrq: Power Off [ 141s] [ 132.839800] reboot: Power down [ 141s] ### VM INTERACTION END ### [ 141s] [ 141s] lamb62 failed "build simtrace2_0.7.0.61.1afb7.dsc" at Mon Aug 10 01:34:27 UTC 2020. [ 141s] -- Configure notifications at https://build.opensuse.org/my/subscriptions openSUSE Build Service (https://build.opensuse.org/)
Build failure of network:osmocom:nightly/simtrace2 in xUbuntu_18.04/x86_64
Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/simtrace2/xUbuntu_18.04/x86_64 Package network:osmocom:nightly/simtrace2 failed to build in xUbuntu_18.04/x86_64 Check out the package for editing: osc checkout network:osmocom:nightly simtrace2 Last lines of build log: [ 125s] [COMPILING libboard/qmod/source/i2c.c] [ 125s] [COMPILING libboard/qmod/source/board_qmod.c] [ 126s] [COMPILING apps/dfu/main.c] [ 126s] [COMPILING ./atmel_softpack_libraries/usb/device/dfu/dfu.c] [ 126s] [COMPILING ./atmel_softpack_libraries/usb/device/dfu/dfu_desc.c] [ 126s] [COMPILING ./atmel_softpack_libraries/usb/device/dfu/dfu_driver.c] [ 126s] Memory region Used Size Region Size %age Used [ 126s] rom: 16576 B16 KB101.17% [ 126s] ram: 11672 B48 KB 23.75/usr/lib/gcc/arm-none-eabi/6.3.1/../../../arm-none-eabi/bin/ld: bin/qmod-dfu-flash.elf section `.text' will not fit in region `rom' [ 126s] /usr/lib/gcc/arm-none-eabi/6.3.1/../../../arm-none-eabi/bin/ld: region `rom' overflowed by 192 bytes [ 126s] collect2: error: ld returned 1 exit status [ 126s] % [ 126s] Makefile:234: recipe for target 'flash' failed [ 126s] make[2]: *** [flash] Error 1 [ 126s] make[2]: Leaving directory '/usr/src/packages/BUILD/firmware' [ 126s] Makefile:13: recipe for target 'fw-qmod-dfu' failed [ 126s] make[1]: *** [fw-qmod-dfu] Error 2 [ 126s] make[1]: Leaving directory '/usr/src/packages/BUILD' [ 126s] dh_auto_build: make -j1 returned exit code 2 [ 126s] debian/rules:16: recipe for target 'build' failed [ 126s] make: *** [build] Error 2 [ 126s] dpkg-buildpackage: error: debian/rules build subprocess returned exit status 2 [ 126s] ### VM INTERACTION START ### [ 129s] [ 122.541206] sysrq: Power Off [ 129s] [ 122.548304] reboot: Power down [ 129s] ### VM INTERACTION END ### [ 129s] [ 129s] lamb23 failed "build simtrace2_0.7.0.61.1afb7.dsc" at Mon Aug 10 01:34:08 UTC 2020. [ 129s] -- Configure notifications at https://build.opensuse.org/my/subscriptions openSUSE Build Service (https://build.opensuse.org/)
Build failure of network:osmocom:nightly/simtrace2 in xUbuntu_19.10/x86_64
Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/simtrace2/xUbuntu_19.10/x86_64 Package network:osmocom:nightly/simtrace2 failed to build in xUbuntu_19.10/x86_64 Check out the package for editing: osc checkout network:osmocom:nightly simtrace2 Last lines of build log: [ 76s] [COMPILING libboard/qmod/source/wwan_perst.c] [ 76s] [COMPILING libboard/qmod/source/card_pres.c] [ 76s] [COMPILING libboard/qmod/source/wwan_led.c] [ 76s] [COMPILING libboard/qmod/source/i2c.c] [ 76s] [COMPILING libboard/qmod/source/board_qmod.c] [ 76s] [COMPILING apps/dfu/main.c] [ 76s] [COMPILING ./atmel_softpack_libraries/usb/device/dfu/dfu.c] [ 76s] [COMPILING ./atmel_softpack_libraries/usb/device/dfu/dfu_desc.c] [ 76s] [COMPILING ./atmel_softpack_libraries/usb/device/dfu/dfu_driver.c] [ 76s] Memory region Used Size Region Size %age Used [ 76s] rom: 16504 B16 KB100.73% [ 76s] ram: 11672 B48 KB 23.75/usr/lib/gcc/arm-none-eabi/7.3.1/../../../arm-none-eabi/bin/ld: bin/qmod-dfu-flash.elf section `.text' will not fit in region `rom' [ 76s] /usr/lib/gcc/arm-none-eabi/7.3.1/../../../arm-none-eabi/bin/ld: region `rom' overflowed by 120 bytes [ 76s] collect2: error: ld returned 1 exit status [ 76s] % [ 76s] make[2]: *** [Makefile:234: flash] Error 1 [ 76s] make[2]: Leaving directory '/usr/src/packages/BUILD/firmware' [ 76s] make[1]: *** [Makefile:13: fw-qmod-dfu] Error 2 [ 76s] make[1]: Leaving directory '/usr/src/packages/BUILD' [ 76s] dh_auto_build: make -j1 returned exit code 2 [ 76s] make: *** [debian/rules:16: build] Error 255 [ 76s] dpkg-buildpackage: error: debian/rules build subprocess returned exit status 2 [ 76s] ### VM INTERACTION START ### [ 79s] [ 74.522469] sysrq: Power Off [ 79s] [ 74.528885] reboot: Power down [ 79s] ### VM INTERACTION END ### [ 79s] [ 79s] goat17 failed "build simtrace2_0.7.0.61.1afb7.dsc" at Mon Aug 10 01:34:05 UTC 2020. [ 79s] -- Configure notifications at https://build.opensuse.org/my/subscriptions openSUSE Build Service (https://build.opensuse.org/)
Build failure of network:osmocom:nightly/simtrace2 in xUbuntu_18.04/i586
Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/simtrace2/xUbuntu_18.04/i586 Package network:osmocom:nightly/simtrace2 failed to build in xUbuntu_18.04/i586 Check out the package for editing: osc checkout network:osmocom:nightly simtrace2 Last lines of build log: [ 109s] [COMPILING libboard/qmod/source/i2c.c] [ 110s] [COMPILING libboard/qmod/source/board_qmod.c] [ 110s] [COMPILING apps/dfu/main.c] [ 110s] [COMPILING ./atmel_softpack_libraries/usb/device/dfu/dfu.c] [ 110s] [COMPILING ./atmel_softpack_libraries/usb/device/dfu/dfu_desc.c] [ 110s] [COMPILING ./atmel_softpack_libraries/usb/device/dfu/dfu_driver.c] [ 110s] Memory region Used Size Region Size %age Used [ 110s] rom: 16576 B16 KB101.17% [ 110s] ram: 11672 B48 KB 23.75/usr/lib/gcc/arm-none-eabi/6.3.1/../../../arm-none-eabi/bin/ld: bin/qmod-dfu-flash.elf section `.text' will not fit in region `rom' [ 110s] /usr/lib/gcc/arm-none-eabi/6.3.1/../../../arm-none-eabi/bin/ld: region `rom' overflowed by 192 bytes [ 110s] collect2: error: ld returned 1 exit status [ 110s] % [ 110s] Makefile:234: recipe for target 'flash' failed [ 110s] make[2]: *** [flash] Error 1 [ 110s] make[2]: Leaving directory '/usr/src/packages/BUILD/firmware' [ 110s] Makefile:13: recipe for target 'fw-qmod-dfu' failed [ 110s] make[1]: *** [fw-qmod-dfu] Error 2 [ 110s] make[1]: Leaving directory '/usr/src/packages/BUILD' [ 110s] dh_auto_build: make -j1 returned exit code 2 [ 110s] debian/rules:16: recipe for target 'build' failed [ 110s] make: *** [build] Error 2 [ 110s] dpkg-buildpackage: error: debian/rules build subprocess returned exit status 2 [ 110s] ### VM INTERACTION START ### [ 113s] [ 106.218754] sysrq: Power Off [ 113s] [ 106.221852] reboot: Power down [ 113s] ### VM INTERACTION END ### [ 113s] [ 113s] old-atreju4 failed "build simtrace2_0.7.0.61.1afb7.dsc" at Mon Aug 10 01:33:54 UTC 2020. [ 113s] -- Configure notifications at https://build.opensuse.org/my/subscriptions openSUSE Build Service (https://build.opensuse.org/)
Change in libosmocore[master]: socket: add osmo_sockaddr_cmp()
lynxis lazus has posted comments on this change. ( https://gerrit.osmocom.org/c/libosmocore/+/19415 ) Change subject: socket: add osmo_sockaddr_cmp() .. Patch Set 10: (1 comment) https://gerrit.osmocom.org/c/libosmocore/+/19415/7/src/socket.c File src/socket.c: https://gerrit.osmocom.org/c/libosmocore/+/19415/7/src/socket.c@1589 PS7, Line 1589: /* fallback to memcmp for remaing AF */ : return memcmp(a, b, sizeof(struct osmo_sockaddr)); > Ack Done -- To view, visit https://gerrit.osmocom.org/c/libosmocore/+/19415 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: libosmocore Gerrit-Branch: master Gerrit-Change-Id: I2d12ebae2710ffd17cf071e6ada0804e73f87dd6 Gerrit-Change-Number: 19415 Gerrit-PatchSet: 10 Gerrit-Owner: lynxis lazus Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: laforge Gerrit-Reviewer: lynxis lazus Gerrit-Comment-Date: Mon, 10 Aug 2020 00:58:00 + Gerrit-HasComments: Yes Gerrit-Has-Labels: No Comment-In-Reply-To: lynxis lazus Comment-In-Reply-To: laforge Gerrit-MessageType: comment
Change in libosmocore[master]: socket: introduce osmo_sock_init3 & osmo_sock_init3_ofd
lynxis lazus has posted comments on this change. ( https://gerrit.osmocom.org/c/libosmocore/+/19143 ) Change subject: socket: introduce osmo_sock_init3 & osmo_sock_init3_ofd .. Patch Set 12: > Patch Set 11: > > > Patch Set 9: > > > > doest it make sense to keep a completely separate implementation for > > osmo_sock_init2_ofd, rather than "redirecting" the old code to the new? > > ping? I don't think it's possible. While osmo_sock_init2 can take AF_UNSPEC, init3 can't. Also osmo_sock_init2 does name resolution, what init3 doesn't. -- To view, visit https://gerrit.osmocom.org/c/libosmocore/+/19143 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: libosmocore Gerrit-Branch: master Gerrit-Change-Id: I1eece543e3241ef0e095eb63bb831f7c15a16794 Gerrit-Change-Number: 19143 Gerrit-PatchSet: 12 Gerrit-Owner: lynxis lazus Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: lynxis lazus Gerrit-Reviewer: pespin Gerrit-CC: laforge Gerrit-Comment-Date: Mon, 10 Aug 2020 00:57:34 + Gerrit-HasComments: No Gerrit-Has-Labels: No Gerrit-MessageType: comment
Change in libosmocore[master]: socket: add osmo_sockaddr_cmp()
Hello laforge, Jenkins Builder, I'd like you to reexamine a change. Please visit https://gerrit.osmocom.org/c/libosmocore/+/19415 to look at the new patch set (#10). Change subject: socket: add osmo_sockaddr_cmp() .. socket: add osmo_sockaddr_cmp() Compare two osmo_sockaddr. Change-Id: I2d12ebae2710ffd17cf071e6ada0804e73f87dd6 --- M include/osmocom/core/socket.h M src/socket.c 2 files changed, 34 insertions(+), 0 deletions(-) git pull ssh://gerrit.osmocom.org:29418/libosmocore refs/changes/15/19415/10 -- To view, visit https://gerrit.osmocom.org/c/libosmocore/+/19415 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: libosmocore Gerrit-Branch: master Gerrit-Change-Id: I2d12ebae2710ffd17cf071e6ada0804e73f87dd6 Gerrit-Change-Number: 19415 Gerrit-PatchSet: 10 Gerrit-Owner: lynxis lazus Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: laforge Gerrit-Reviewer: lynxis lazus Gerrit-MessageType: newpatchset
Change in libosmocore[master]: socket.h: introduce osmo_sockaddr to hold v4 and v6 endpoints
Hello laforge, Jenkins Builder, I'd like you to reexamine a change. Please visit https://gerrit.osmocom.org/c/libosmocore/+/19141 to look at the new patch set (#9). Change subject: socket.h: introduce osmo_sockaddr to hold v4 and v6 endpoints .. socket.h: introduce osmo_sockaddr to hold v4 and v6 endpoints When dealing with IPv4 and IPv6 address, the struct sockaddr allows to hold IPv4 and IPv6. However even when struct sockaddr is being used, a cast to the IPv4 or IPv6 family must happen. To work around this additional code, use a union for the most common types. Change-Id: If80172373735193401af872b18e1ff00c93880e7 --- M include/osmocom/core/socket.h 1 file changed, 11 insertions(+), 2 deletions(-) git pull ssh://gerrit.osmocom.org:29418/libosmocore refs/changes/41/19141/9 -- To view, visit https://gerrit.osmocom.org/c/libosmocore/+/19141 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: libosmocore Gerrit-Branch: master Gerrit-Change-Id: If80172373735193401af872b18e1ff00c93880e7 Gerrit-Change-Number: 19141 Gerrit-PatchSet: 9 Gerrit-Owner: lynxis lazus Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: laforge Gerrit-Reviewer: lynxis lazus Gerrit-CC: pespin Gerrit-MessageType: newpatchset
Change in libosmocore[master]: socket: add osmo_sockaddr_cmp()
lynxis lazus has posted comments on this change. ( https://gerrit.osmocom.org/c/libosmocore/+/19415 ) Change subject: socket: add osmo_sockaddr_cmp() .. Patch Set 9: (1 comment) https://gerrit.osmocom.org/c/libosmocore/+/19415/7/src/socket.c File src/socket.c: https://gerrit.osmocom.org/c/libosmocore/+/19415/7/src/socket.c@1589 PS7, Line 1589: /* fallback to memcmp for remaing AF */ : return memcmp(a, b, sizeof(struct osmo_sockaddr)); > might be worth moving this into a "default:" clause of the switch statement > to clearly see it's thre […] Ack -- To view, visit https://gerrit.osmocom.org/c/libosmocore/+/19415 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: libosmocore Gerrit-Branch: master Gerrit-Change-Id: I2d12ebae2710ffd17cf071e6ada0804e73f87dd6 Gerrit-Change-Number: 19415 Gerrit-PatchSet: 9 Gerrit-Owner: lynxis lazus Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: laforge Gerrit-Reviewer: lynxis lazus Gerrit-Comment-Date: Mon, 10 Aug 2020 00:03:00 + Gerrit-HasComments: Yes Gerrit-Has-Labels: No Comment-In-Reply-To: laforge Gerrit-MessageType: comment
Change in osmo-ttcn3-hacks[master]: f_vty_transceive: allow to ignore unknown vty commands
neels has uploaded this change for review. (
https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/19555 )
Change subject: f_vty_transceive: allow to ignore unknown vty commands
..
f_vty_transceive: allow to ignore unknown vty commands
When a new test uses a VTY configuration that may not yet be available in the
'latest' build, it can be useful to ignore the "Unknown VTY Command" error.
To be used by f_init() for multiple MSCs, setting a default 'allow-attach' flag
per MSC implicitly -- such vty config is not yet supported in the latest build.
Change-Id: I284c42e10c0cb282c8410db87959b471867edef6
---
M library/Osmocom_VTY_Functions.ttcn
1 file changed, 10 insertions(+), 6 deletions(-)
git pull ssh://gerrit.osmocom.org:29418/osmo-ttcn3-hacks
refs/changes/55/19555/1
diff --git a/library/Osmocom_VTY_Functions.ttcn
b/library/Osmocom_VTY_Functions.ttcn
index 823d79f..4cf37c4 100644
--- a/library/Osmocom_VTY_Functions.ttcn
+++ b/library/Osmocom_VTY_Functions.ttcn
@@ -56,7 +56,7 @@
}
/* wait for any of the permitted prompts; buffer + return all
intermediate output */
- function f_vty_wait_for_prompt(TELNETasp_PT pt) return charstring {
+ function f_vty_wait_for_prompt(TELNETasp_PT pt, boolean strict := true)
return charstring {
var charstring rx, buf := "";
var integer fd;
timer T := 2.0;
@@ -67,7 +67,11 @@
[] pt.receive(pattern "[\w-]+\# ") { };
[] pt.receive(pattern "[\w-]+\(*\)\# ") { };
[] pt.receive(t_vty_unknown) {
- testcase.stop(fail, "VTY: Unknown Command");
+ if (strict) {
+ testcase.stop(fail, "VTY: Unknown
Command");
+ } else {
+ log("VTY: Unknown Command (ignored)");
+ }
};
[] pt.receive(charstring:?) -> value rx { buf := buf &
rx; repeat };
[] pt.receive(integer:?) -> value fd {
@@ -88,14 +92,14 @@
}
/* send a VTY command and obtain response until prompt is received */
- function f_vty_transceive_ret(TELNETasp_PT pt, charstring tx) return
charstring {
+ function f_vty_transceive_ret(TELNETasp_PT pt, charstring tx, boolean
strict := true) return charstring {
pt.send(tx);
- return f_vty_wait_for_prompt(pt);
+ return f_vty_wait_for_prompt(pt, strict);
}
/* send a VTY command and obtain response until prompt is received */
- function f_vty_transceive(TELNETasp_PT pt, charstring tx) {
- var charstring unused := f_vty_transceive_ret(pt, tx);
+ function f_vty_transceive(TELNETasp_PT pt, charstring tx, boolean
strict := true) {
+ var charstring unused := f_vty_transceive_ret(pt, tx, strict);
}
type integer BtsNr (0..255);
--
To view, visit https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/19555
To unsubscribe, or for help writing mail filters, visit
https://gerrit.osmocom.org/settings
Gerrit-Project: osmo-ttcn3-hacks
Gerrit-Branch: master
Gerrit-Change-Id: I284c42e10c0cb282c8410db87959b471867edef6
Gerrit-Change-Number: 19555
Gerrit-PatchSet: 1
Gerrit-Owner: neels
Gerrit-MessageType: newchange
Change in osmo-ttcn3-hacks[master]: fix mscpool cleanup (fixes LCLS tests)
Hello Jenkins Builder, I'd like you to reexamine a change. Please visit https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/19554 to look at the new patch set (#2). Change subject: fix mscpool cleanup (fixes LCLS tests) .. fix mscpool cleanup (fixes LCLS tests) osmo-bsc takes a while to notice that a connected MSC is no longer connected. Once the mscpool tests have run, the additional msc 1 and msc 2 still linger around even though the BSSMAP link is no longer served by the bsc-tester. The easiest way to ensure that only expected MSCs are contacted is to set 'no allow-attach' for each MSC that should not be in use. So, the default setup is 'allow-attach' on msc 0, and 'no allow-attach' on mscs 1 and 2. In f_init(), allow attach on those MSCs indicated by the nr_msc amount. The entire vty transaction to configure attach/no attach for all three MSCs takes about 4 micro seconds in my test setup, so it is fine to do this during f_init() for each BSC test. After this, tests running after the MSC pooling tests (the LCLS tests) no longer round-robin their subscribers across disconnected MSCs. NOTE: it would be good to somehow detect more reliably in osmo-bsc that an MSC is gone and not use it anymore. That is however not so trivial. To get the LCLS tests back online, this is a workaround to avoid that complexity for now. Change-Id: I02ad58ed7d0d0aac61e393b415e09c6c5c8a70ca --- M bsc/BSC_Tests.ttcn 1 file changed, 28 insertions(+), 22 deletions(-) git pull ssh://gerrit.osmocom.org:29418/osmo-ttcn3-hacks refs/changes/54/19554/2 -- To view, visit https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/19554 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-ttcn3-hacks Gerrit-Branch: master Gerrit-Change-Id: I02ad58ed7d0d0aac61e393b415e09c6c5c8a70ca Gerrit-Change-Number: 19554 Gerrit-PatchSet: 2 Gerrit-Owner: neels Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: neels Gerrit-MessageType: newpatchset
Change in osmo-ttcn3-hacks[master]: fix mscpool cleanup (fixes LCLS tests)
neels has posted comments on this change. ( https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/19554 ) Change subject: fix mscpool cleanup (fixes LCLS tests) .. Patch Set 1: argh, latest build doesn't have the 'allow-attach' option yet... -- To view, visit https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/19554 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-ttcn3-hacks Gerrit-Branch: master Gerrit-Change-Id: I02ad58ed7d0d0aac61e393b415e09c6c5c8a70ca Gerrit-Change-Number: 19554 Gerrit-PatchSet: 1 Gerrit-Owner: neels Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: neels Gerrit-Comment-Date: Sun, 09 Aug 2020 21:38:33 + Gerrit-HasComments: No Gerrit-Has-Labels: No Gerrit-MessageType: comment
Change in osmo-ttcn3-hacks[master]: fix mscpool cleanup (fixes LCLS tests)
neels has uploaded this change for review. (
https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/19554 )
Change subject: fix mscpool cleanup (fixes LCLS tests)
..
fix mscpool cleanup (fixes LCLS tests)
osmo-bsc takes a while to notice that a connected MSC is no longer connected.
Once the mscpool tests have run, the additional msc 1 and msc 2 still linger
around even though the BSSMAP link is no longer served by the bsc-tester.
The easiest way to ensure that only expected MSCs are contacted is to set
'no allow-attach' for each MSC that should not be in use.
So, the default setup is 'allow-attach' on msc 0, and 'no allow-attach' on mscs
1 and 2. In f_init(), allow attach on those MSCs indicated by the nr_msc
amount. The entire vty transaction to configure attach/no attach for all three
MSCs takes about 4 micro seconds in my test setup, so it is fine to do this
during f_init() for each BSC test.
After this, tests running after the MSC pooling tests (the LCLS tests) no
longer round-robin their subscribers across disconnected MSCs.
NOTE: it would be good to somehow detect more reliably in osmo-bsc that an MSC
is gone and not use it anymore. That is however not so trivial. To get the LCLS
tests back online, this is a workaround to avoid that complexity for now.
Change-Id: I02ad58ed7d0d0aac61e393b415e09c6c5c8a70ca
---
M bsc/BSC_Tests.ttcn
1 file changed, 27 insertions(+), 22 deletions(-)
git pull ssh://gerrit.osmocom.org:29418/osmo-ttcn3-hacks
refs/changes/54/19554/1
diff --git a/bsc/BSC_Tests.ttcn b/bsc/BSC_Tests.ttcn
index 5bd0e4f..c35100e 100644
--- a/bsc/BSC_Tests.ttcn
+++ b/bsc/BSC_Tests.ttcn
@@ -832,6 +832,23 @@
}
}
+/* TODO: use BooleanList from COMMON/src/General_Types.ttcn */
+private type record of boolean my_BooleanList;
+
+private function f_vty_msc_allow_attach(TELNETasp_PT pt, my_BooleanList
allow_attach_list)
+{
+ for (var integer msc_nr := 0; msc_nr < sizeof(allow_attach_list);
msc_nr := msc_nr+1) {
+ f_vty_enter_cfg_msc(pt, msc_nr);
+ if (allow_attach_list[msc_nr]) {
+ f_vty_transceive(pt, "allow-attach");
+ } else {
+ f_vty_transceive(pt, "no allow-attach");
+ }
+ f_vty_transceive(pt, "exit");
+ f_vty_transceive(pt, "exit");
+ }
+}
+
/* global initialization function
* \param nr_bts Number of BTSs we should start/bring up
* \param handler_mode Start an RSL_Emulation_CT component (true) or not
(false).
@@ -854,7 +871,9 @@
f_vty_allow_osmux(allow_osmux);
}
+ var my_BooleanList allow_attach := { false, false, false };
for (bssap_idx := 0; bssap_idx < nr_msc; bssap_idx := bssap_idx+1) {
+ allow_attach[bssap_idx] := true;
/* Call a function of our 'parent component' RAN_Adapter_CT to
start the
* MSC-side BSSAP emulation */
if (handler_mode) {
@@ -871,6 +890,9 @@
}
}
+ /* start the test with exactly all enabled MSCs allowed to attach */
+ f_vty_msc_allow_attach(BSCVTY, allow_attach);
+
f_ipa_ctrl_start(mp_bsc_ip, mp_bsc_ctrl_port);
f_init_mgcp("VirtMSC");
@@ -5850,17 +5872,13 @@
f_init(nr_bts := 3, handler_mode := true, nr_msc := 3);
f_sleep(1.0);
+ /* Mark the second MSC as offloading, round-robin should skip this MSC
now. */
+ f_vty_msc_allow_attach(BSCVTY, {true, false, true});
/* Control which MSC gets chosen next by the round-robin, otherwise
* would be randomly affected by which other tests ran before this. */
f_vty_transceive(BSCVTY, "mscpool roundrobin next 0");
- /* Mark the second MSC as offloading, round-robin should skip this MSC
now. */
- f_vty_enter_cfg_msc(BSCVTY, 1);
- f_vty_transceive(BSCVTY, "no allow-attach");
- f_vty_transceive(BSCVTY, "exit");
- f_vty_transceive(BSCVTY, "exit");
-
f_ctrs_msc_init();
var MSC_ConnHdlr vc_conn1;
@@ -5886,11 +5904,6 @@
vc_conn3 := f_start_handler(refers(f_tc_mscpool_compl_l3), pars3);
vc_conn3.done;
f_ctrs_msc_expect(0, "mscpool:subscr:new");
-
- f_vty_enter_cfg_msc(BSCVTY, 1);
- f_vty_transceive(BSCVTY, "allow-attach");
- f_vty_transceive(BSCVTY, "exit");
- f_vty_transceive(BSCVTY, "exit");
}
/* An MSC that has 'no allow-attach' set should still serve subscribers that
are already attached according to their
@@ -5900,16 +5913,13 @@
f_init(nr_bts := 3, handler_mode := true, nr_msc := 3);
f_sleep(1.0);
+ /* Mark the second MSC as offloading, round-robin should skip this MSC
now. */
+ f_vty_msc_allow_attach(BSCVTY, {true, false, true});
+
/* Control which MSC gets chosen next by the round-robin, otherwise
* would be randomly affected by which other tests
Build failure of network:osmocom:latest/ulfius in Debian_Testing/x86_64
Visit
https://build.opensuse.org/package/live_build_log/network:osmocom:latest/ulfius/Debian_Testing/x86_64
Package network:osmocom:latest/ulfius failed to build in Debian_Testing/x86_64
Check out the package for editing:
osc checkout network:osmocom:latest ulfius
Last lines of build log:
[ 112s] /usr/src/packages/BUILD/src/ulfius.c:839:48: error: passing argument 5
of 'MHD_start_daemon' from incompatible pointer type
[-Werror=incompatible-pointer-types]
[ 112s] 839 | mhd_flags, u_instance->port, NULL, NULL,
_webservice_dispatcher, (void *)u_instance,
[ 112s] |
^
[ 112s] ||
[ 112s] |int (*)(void *,
struct MHD_Connection *, const char *, const char *, const char *, const char
*, size_t *, void **) {aka int (*)(void *, struct MHD_Connection *, const char
*, const char *, const char *, const char *, long unsigned int *, void **)}
[ 112s] In file included from /usr/src/packages/BUILD/include/ulfius.h:46,
[ 112s] from /usr/src/packages/BUILD/include/u_private.h:29,
[ 112s] from /usr/src/packages/BUILD/src/ulfius.c:29:
[ 112s] /usr/include/microhttpd.h:2425:1: note: expected
'MHD_AccessHandlerCallback' {aka 'enum MHD_Result (*)(void *, struct
MHD_Connection *, const char *, const char *, const char *, const char *, long
unsigned int *, void **)'} but argument is of type 'int (*)(void *, struct
MHD_Connection *, const char *, const char *, const char *, const char *,
size_t *, void **)' {aka 'int (*)(void *, struct MHD_Connection *, const char
*, const char *, const char *, const char *, long unsigned int *, void **)'}
[ 112s] 2425 | MHD_start_daemon (unsigned int flags,
[ 112s] | ^~~~
[ 112s] cc1: all warnings being treated as errors
[ 112s] make[3]: *** [CMakeFiles/ulfius.dir/build.make:144:
CMakeFiles/ulfius.dir/src/ulfius.c.o] Error 1
[ 112s] make[3]: *** Waiting for unfinished jobs
[ 112s] make[3]: Leaving directory '/usr/src/packages/BUILD/build'
[ 112s] make[2]: *** [CMakeFiles/Makefile2:87: CMakeFiles/ulfius.dir/all]
Error 2
[ 112s] make[2]: Leaving directory '/usr/src/packages/BUILD/build'
[ 112s] make[1]: *** [Makefile:166: all] Error 2
[ 112s] make[1]: Leaving directory '/usr/src/packages/BUILD/build'
[ 112s] dh_auto_build: error: cd build && make -j4 "INSTALL=install
--strip-program=true" returned exit code 2
[ 112s] make: *** [debian/rules:9: build] Error 25
[ 112s] dpkg-buildpackage: error: debian/rules build subprocess returned exit
status 2
[ 112s] ### VM INTERACTION START ###
[ 115s] [ 98.743170] sysrq: Power Off
[ 115s] [ 98.746849] reboot: Power down
[ 115s] ### VM INTERACTION END ###
[ 115s]
[ 115s] cloud122 failed "build ulfius_2.5.2-4.1.dsc" at Sun Aug 9 21:12:15
UTC 2020.
[ 115s]
--
Configure notifications at https://build.opensuse.org/my/subscriptions
openSUSE Build Service (https://build.opensuse.org/)
Build failure of network:osmocom:nightly/ulfius in Debian_Testing/x86_64
Visit
https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/ulfius/Debian_Testing/x86_64
Package network:osmocom:nightly/ulfius failed to build in Debian_Testing/x86_64
Check out the package for editing:
osc checkout network:osmocom:nightly ulfius
Last lines of build log:
[ 62s] /usr/src/packages/BUILD/src/ulfius.c: In function
'ulfius_run_mhd_daemon':
[ 62s] /usr/src/packages/BUILD/src/ulfius.c:839:48: error: passing argument 5
of 'MHD_start_daemon' from incompatible pointer type
[-Werror=incompatible-pointer-types]
[ 62s] 839 | mhd_flags, u_instance->port, NULL, NULL,
_webservice_dispatcher, (void *)u_instance,
[ 62s] |
^
[ 62s] ||
[ 62s] |int (*)(void *,
struct MHD_Connection *, const char *, const char *, const char *, const char
*, size_t *, void **) {aka int (*)(void *, struct MHD_Connection *, const char
*, const char *, const char *, const char *, long unsigned int *, void **)}
[ 62s] In file included from /usr/src/packages/BUILD/include/ulfius.h:46,
[ 62s] from /usr/src/packages/BUILD/include/u_private.h:29,
[ 62s] from /usr/src/packages/BUILD/src/ulfius.c:29:
[ 62s] /usr/include/microhttpd.h:2425:1: note: expected
'MHD_AccessHandlerCallback' {aka 'enum MHD_Result (*)(void *, struct
MHD_Connection *, const char *, const char *, const char *, const char *, long
unsigned int *, void **)'} but argument is of type 'int (*)(void *, struct
MHD_Connection *, const char *, const char *, const char *, const char *,
size_t *, void **)' {aka 'int (*)(void *, struct MHD_Connection *, const char
*, const char *, const char *, const char *, long unsigned int *, void **)'}
[ 62s] 2425 | MHD_start_daemon (unsigned int flags,
[ 62s] | ^~~~
[ 62s] cc1: all warnings being treated as errors
[ 62s] make[3]: *** [CMakeFiles/ulfius.dir/build.make:144:
CMakeFiles/ulfius.dir/src/ulfius.c.o] Error 1
[ 62s] make[3]: Leaving directory '/usr/src/packages/BUILD/build'
[ 62s] make[2]: *** [CMakeFiles/Makefile2:87: CMakeFiles/ulfius.dir/all]
Error 2
[ 62s] make[2]: Leaving directory '/usr/src/packages/BUILD/build'
[ 62s] make[1]: *** [Makefile:166: all] Error 2
[ 62s] make[1]: Leaving directory '/usr/src/packages/BUILD/build'
[ 62s] dh_auto_build: error: cd build && make -j3 "INSTALL=install
--strip-program=true" returned exit code 2
[ 62s] make: *** [debian/rules:9: build] Error 25
[ 62s] dpkg-buildpackage: error: debian/rules build subprocess returned exit
status 2
[ 62s] ### VM INTERACTION START ###
[ 65s] [ 59.498196] sysrq: Power Off
[ 65s] [ 59.499690] reboot: Power down
[ 65s] ### VM INTERACTION END ###
[ 65s]
[ 65s] build75 failed "build ulfius_2.5.2-4.1.dsc" at Sun Aug 9 21:11:23 UTC
2020.
[ 65s]
--
Configure notifications at https://build.opensuse.org/my/subscriptions
openSUSE Build Service (https://build.opensuse.org/)
Change in osmo-ttcn3-hacks[master]: library/PCUIF_Types: version 10: add frequency hopping parameters
fixeria has posted comments on this change. ( https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/19323 ) Change subject: library/PCUIF_Types: version 10: add frequency hopping parameters .. Patch Set 11: > Patch Set 10: > > what I'm trying to say this kind of information belongs into the commitlog. Done. We can merge this change set now without breaking anything. -- To view, visit https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/19323 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-ttcn3-hacks Gerrit-Branch: master Gerrit-Change-Id: Idf11bc4ba3ff0b00b32f2beab8fd020c67119d05 Gerrit-Change-Number: 19323 Gerrit-PatchSet: 11 Gerrit-Owner: fixeria Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: fixeria Gerrit-Reviewer: laforge Gerrit-Reviewer: lynxis lazus Gerrit-CC: pespin Gerrit-Comment-Date: Sun, 09 Aug 2020 13:06:26 + Gerrit-HasComments: No Gerrit-Has-Labels: No Gerrit-MessageType: comment
Change in osmo-ttcn3-hacks[master]: library/PCUIF_Types: add receive templates for PCUIF_InfoTrxTs
Hello laforge, Jenkins Builder, I'd like you to reexamine a change. Please visit https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/19516 to look at the new patch set (#4). Change subject: library/PCUIF_Types: add receive templates for PCUIF_InfoTrxTs .. library/PCUIF_Types: add receive templates for PCUIF_InfoTrxTs Change-Id: I062079de4440d2c9c0a079cc4cc4328ea0ea37dd --- M library/PCUIF_Types.ttcn 1 file changed, 16 insertions(+), 0 deletions(-) git pull ssh://gerrit.osmocom.org:29418/osmo-ttcn3-hacks refs/changes/16/19516/4 -- To view, visit https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/19516 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-ttcn3-hacks Gerrit-Branch: master Gerrit-Change-Id: I062079de4440d2c9c0a079cc4cc4328ea0ea37dd Gerrit-Change-Number: 19516 Gerrit-PatchSet: 4 Gerrit-Owner: fixeria Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: laforge Gerrit-MessageType: newpatchset
Change in osmo-ttcn3-hacks[master]: BTS_Tests: compose the MA bitmask in f_resolve_fh_params()
Hello pespin, laforge, Jenkins Builder, I'd like you to reexamine a change. Please visit https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/19517 to look at the new patch set (#5). Change subject: BTS_Tests: compose the MA bitmask in f_resolve_fh_params() .. BTS_Tests: compose the MA bitmask in f_resolve_fh_params() Change-Id: Ic0a07d9deb60712347a42d9aa7813c684eaccd01 Related: SYS#4868, OS#4546 --- M bts/BTS_Tests.ttcn 1 file changed, 10 insertions(+), 2 deletions(-) git pull ssh://gerrit.osmocom.org:29418/osmo-ttcn3-hacks refs/changes/17/19517/5 -- To view, visit https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/19517 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-ttcn3-hacks Gerrit-Branch: master Gerrit-Change-Id: Ic0a07d9deb60712347a42d9aa7813c684eaccd01 Gerrit-Change-Number: 19517 Gerrit-PatchSet: 5 Gerrit-Owner: fixeria Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: fixeria Gerrit-Reviewer: laforge Gerrit-Reviewer: pespin Gerrit-MessageType: newpatchset
Change in osmo-ttcn3-hacks[master]: library/PCUIF_Types: version 10: add frequency hopping parameters
Hello lynxis lazus, laforge, Jenkins Builder,
I'd like you to reexamine a change. Please visit
https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/19323
to look at the new patch set (#11).
Change subject: library/PCUIF_Types: version 10: add frequency hopping
parameters
..
library/PCUIF_Types: version 10: add frequency hopping parameters
This change introduces new version 10 specific extensions, in
particular: the frequency hopping parameters of each timeslot.
These parameters are used to compose Channel Description IE
in the packet resource assignment messages.
In order to maintain backwards compatibility with version 9 of
the PCUIF, and thus to still be able to run test cases against
the latest release of osmo-pcu, I kept the old parts of the
INFO.ind and gruoped them together with the new records
into union 'PCUIF_InfoTrxs'.
During decoding, the content of this union is resolved by the
TITAN's RAW codec itself, depending on value of the 'version'
field. During the encoding, it's the responsibility of the
API user to set a proper field of the union. I implemented
both f_PCUIF_ver_INFO_{Trxs,PDCHMask} helpers for that.
Version 9 is kept as default, so this change can be merged
independently of the actual implementation. We can bump
it and remove the compatibility glue once the new versions
of both osmo-bts and osmo-pcu are released.
Change-Id: Idf11bc4ba3ff0b00b32f2beab8fd020c67119d05
Related: SYS#4868, OS#4547
---
M bts/BTS_Tests.ttcn
M library/PCUIF_Types.ttcn
M pcu/PCU_Tests.ttcn
3 files changed, 107 insertions(+), 13 deletions(-)
git pull ssh://gerrit.osmocom.org:29418/osmo-ttcn3-hacks
refs/changes/23/19323/11
--
To view, visit https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/19323
To unsubscribe, or for help writing mail filters, visit
https://gerrit.osmocom.org/settings
Gerrit-Project: osmo-ttcn3-hacks
Gerrit-Branch: master
Gerrit-Change-Id: Idf11bc4ba3ff0b00b32f2beab8fd020c67119d05
Gerrit-Change-Number: 19323
Gerrit-PatchSet: 11
Gerrit-Owner: fixeria
Gerrit-Reviewer: Jenkins Builder
Gerrit-Reviewer: fixeria
Gerrit-Reviewer: laforge
Gerrit-Reviewer: lynxis lazus
Gerrit-CC: pespin
Gerrit-MessageType: newpatchset
Change in osmo-ttcn3-hacks[master]: BTS_Tests: verify hopping parameters in the INFO.ind message
Hello pespin, laforge, Jenkins Builder, I'd like you to reexamine a change. Please visit https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/19518 to look at the new patch set (#5). Change subject: BTS_Tests: verify hopping parameters in the INFO.ind message .. BTS_Tests: verify hopping parameters in the INFO.ind message Change-Id: I9bb164fd2c7c48b91e0d7bd1abaf3cfec155342c Related: I0478b499d0488269544910fbd4ed9929c05d Related: SYS#4868, OS#4546, OS#4547 --- M bts/BTS_Tests.ttcn 1 file changed, 45 insertions(+), 0 deletions(-) git pull ssh://gerrit.osmocom.org:29418/osmo-ttcn3-hacks refs/changes/18/19518/5 -- To view, visit https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/19518 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-ttcn3-hacks Gerrit-Branch: master Gerrit-Change-Id: I9bb164fd2c7c48b91e0d7bd1abaf3cfec155342c Gerrit-Change-Number: 19518 Gerrit-PatchSet: 5 Gerrit-Owner: fixeria Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: fixeria Gerrit-Reviewer: laforge Gerrit-Reviewer: pespin Gerrit-MessageType: newpatchset
Change in osmo-ttcn3-hacks[master]: PCU_Tests: verify handling of frequency hopping parameters
Hello pespin, laforge, Jenkins Builder, I'd like you to reexamine a change. Please visit https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/19324 to look at the new patch set (#11). Change subject: PCU_Tests: verify handling of frequency hopping parameters .. PCU_Tests: verify handling of frequency hopping parameters Change-Id: I1beda9224998848f9243237413e5ae3e0ddab8a5 Related: SYS#4868, OS#4547 --- M pcu/PCU_Tests.ttcn 1 file changed, 271 insertions(+), 0 deletions(-) git pull ssh://gerrit.osmocom.org:29418/osmo-ttcn3-hacks refs/changes/24/19324/11 -- To view, visit https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/19324 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-ttcn3-hacks Gerrit-Branch: master Gerrit-Change-Id: I1beda9224998848f9243237413e5ae3e0ddab8a5 Gerrit-Change-Number: 19324 Gerrit-PatchSet: 11 Gerrit-Owner: fixeria Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: fixeria Gerrit-Reviewer: laforge Gerrit-Reviewer: pespin Gerrit-MessageType: newpatchset
Change in osmo-bsc[master]: vty: allow enabling freq. hopping regardless of the feature vector
fixeria has uploaded this change for review. (
https://gerrit.osmocom.org/c/osmo-bsc/+/19553 )
Change subject: vty: allow enabling freq. hopping regardless of the feature
vector
..
vty: allow enabling freq. hopping regardless of the feature vector
The hard-coded per-BTS feature vector for osmo-bts currently lacks
BTS_FEAT_HOPPING, and this is unlikely to change, because only the
recent osmo-bts-trx does support freq. hopping, while the other
(DSP based) back-ends do not seem to be capable of doing it.
Let's allow enabling freq. hopping regardless of the feature vector,
so either it would work if it's supported, or the BTS would reject
Set Channel Attributes message by sending NACK on the A-bis/OML.
Change-Id: Iff23109cacb5d314f7bcbf34b25e89af9281ce40
Related: SYS#4868, OS#4546
---
M src/osmo-bsc/bsc_vty.c
1 file changed, 4 insertions(+), 3 deletions(-)
git pull ssh://gerrit.osmocom.org:29418/osmo-bsc refs/changes/53/19553/1
diff --git a/src/osmo-bsc/bsc_vty.c b/src/osmo-bsc/bsc_vty.c
index 16935d3..9bb650f 100644
--- a/src/osmo-bsc/bsc_vty.c
+++ b/src/osmo-bsc/bsc_vty.c
@@ -4588,9 +4588,10 @@
int enabled = atoi(argv[0]);
if (enabled && !osmo_bts_has_feature(>trx->bts->model->features,
BTS_FEAT_HOPPING)) {
- vty_out(vty, "%% BTS model does not support hopping%s",
- VTY_NEWLINE);
- return CMD_WARNING;
+ vty_out(vty, "%% BTS model does not seem to support freq.
hopping%s", VTY_NEWLINE);
+ /* Allow enabling frequency hopping anyway, because the BTS
might not have
+* connected yet (thus not sent the feature vector), so we
cannot know for
+* sure. Jet print a warning and let it go. */
}
ts->hopping.enabled = enabled;
--
To view, visit https://gerrit.osmocom.org/c/osmo-bsc/+/19553
To unsubscribe, or for help writing mail filters, visit
https://gerrit.osmocom.org/settings
Gerrit-Project: osmo-bsc
Gerrit-Branch: master
Gerrit-Change-Id: Iff23109cacb5d314f7bcbf34b25e89af9281ce40
Gerrit-Change-Number: 19553
Gerrit-PatchSet: 1
Gerrit-Owner: fixeria
Gerrit-MessageType: newchange
Change in osmo-bsc[master]: vty: introduce and use GPRS_CHECK_ENABLED() macro
fixeria has uploaded this change for review. (
https://gerrit.osmocom.org/c/osmo-bsc/+/19552 )
Change subject: vty: introduce and use GPRS_CHECK_ENABLED() macro
..
vty: introduce and use GPRS_CHECK_ENABLED() macro
Change-Id: I39907a569e80344fc73596bea32a1b474ec720e0
---
M src/osmo-bsc/bsc_vty.c
1 file changed, 21 insertions(+), 48 deletions(-)
git pull ssh://gerrit.osmocom.org:29418/osmo-bsc refs/changes/52/19552/1
diff --git a/src/osmo-bsc/bsc_vty.c b/src/osmo-bsc/bsc_vty.c
index fc4ebd6..16935d3 100644
--- a/src/osmo-bsc/bsc_vty.c
+++ b/src/osmo-bsc/bsc_vty.c
@@ -2916,6 +2916,15 @@
#define GPRS_TEXT "GPRS Packet Network\n"
+#define GPRS_CHECK_ENABLED(bts) \
+ do { \
+ if (bts->gprs.mode == BTS_GPRS_NONE) { \
+ vty_out(vty, "%% GPRS is not enabled on BTS %u%s", \
+ bts->nr, VTY_NEWLINE); \
+ return CMD_WARNING; \
+ } \
+ } while (0)
+
DEFUN(cfg_bts_prs_bvci, cfg_bts_gprs_bvci_cmd,
"gprs cell bvci <2-65535>",
GPRS_TEXT
@@ -2926,10 +2935,7 @@
/* ETSI TS 101 343: values 0 and 1 are reserved for signalling and PTM
*/
struct gsm_bts *bts = vty->index;
- if (bts->gprs.mode == BTS_GPRS_NONE) {
- vty_out(vty, "%% GPRS not enabled on BTS %u%s", bts->nr,
VTY_NEWLINE);
- return CMD_WARNING;
- }
+ GPRS_CHECK_ENABLED(bts);
bts->gprs.cell.bvci = atoi(argv[0]);
@@ -2944,10 +2950,7 @@
{
struct gsm_bts *bts = vty->index;
- if (bts->gprs.mode == BTS_GPRS_NONE) {
- vty_out(vty, "%% GPRS not enabled on BTS %u%s", bts->nr,
VTY_NEWLINE);
- return CMD_WARNING;
- }
+ GPRS_CHECK_ENABLED(bts);
bts->gprs.nse.nsei = atoi(argv[0]);
@@ -2966,10 +2969,7 @@
struct gsm_bts *bts = vty->index;
int idx = atoi(argv[0]);
- if (bts->gprs.mode == BTS_GPRS_NONE) {
- vty_out(vty, "%% GPRS not enabled on BTS %u%s", bts->nr,
VTY_NEWLINE);
- return CMD_WARNING;
- }
+ GPRS_CHECK_ENABLED(bts);
bts->gprs.nsvc[idx].nsvci = atoi(argv[1]);
@@ -2987,10 +2987,7 @@
struct gsm_bts *bts = vty->index;
int idx = atoi(argv[0]);
- if (bts->gprs.mode == BTS_GPRS_NONE) {
- vty_out(vty, "%% GPRS not enabled on BTS %u%s", bts->nr,
VTY_NEWLINE);
- return CMD_WARNING;
- }
+ GPRS_CHECK_ENABLED(bts);
bts->gprs.nsvc[idx].local_port = atoi(argv[1]);
@@ -3008,10 +3005,7 @@
struct gsm_bts *bts = vty->index;
int idx = atoi(argv[0]);
- if (bts->gprs.mode == BTS_GPRS_NONE) {
- vty_out(vty, "%% GPRS not enabled on BTS %u%s", bts->nr,
VTY_NEWLINE);
- return CMD_WARNING;
- }
+ GPRS_CHECK_ENABLED(bts);
bts->gprs.nsvc[idx].remote_port = atoi(argv[1]);
@@ -3029,10 +3023,7 @@
int idx = atoi(argv[0]);
struct in_addr ia;
- if (bts->gprs.mode == BTS_GPRS_NONE) {
- vty_out(vty, "%% GPRS not enabled on BTS %u%s", bts->nr,
VTY_NEWLINE);
- return CMD_WARNING;
- }
+ GPRS_CHECK_ENABLED(bts);
inet_aton(argv[1], );
bts->gprs.nsvc[idx].remote_ip = ntohl(ia.s_addr);
@@ -3062,10 +3053,7 @@
int idx = get_string_value(gprs_ns_timer_strs, argv[0]);
int val = atoi(argv[1]);
- if (bts->gprs.mode == BTS_GPRS_NONE) {
- vty_out(vty, "%% GPRS not enabled on BTS %u%s", bts->nr,
VTY_NEWLINE);
- return CMD_WARNING;
- }
+ GPRS_CHECK_ENABLED(bts);
if (idx < 0 || idx >= ARRAY_SIZE(bts->gprs.nse.timer))
return CMD_WARNING;
@@ -3099,10 +3087,7 @@
int idx = get_string_value(gprs_bssgp_cfg_strs, argv[0]);
int val = atoi(argv[1]);
- if (bts->gprs.mode == BTS_GPRS_NONE) {
- vty_out(vty, "%% GPRS not enabled on BTS %u%s", bts->nr,
VTY_NEWLINE);
- return CMD_WARNING;
- }
+ GPRS_CHECK_ENABLED(bts);
if (idx < 0 || idx >= ARRAY_SIZE(bts->gprs.cell.timer))
return CMD_WARNING;
@@ -3121,10 +3106,7 @@
{
struct gsm_bts *bts = vty->index;
- if (bts->gprs.mode == BTS_GPRS_NONE) {
- vty_out(vty, "%% GPRS not enabled on BTS %u%s", bts->nr,
VTY_NEWLINE);
- return CMD_WARNING;
- }
+ GPRS_CHECK_ENABLED(bts);
bts->gprs.rac = atoi(argv[0]);
@@ -3138,10 +3120,7 @@
{
struct gsm_bts *bts = vty->index;
- if (bts->gprs.mode == BTS_GPRS_NONE) {
- vty_out(vty, "%% GPRS not enabled on BTS %u%s", bts->nr,
VTY_NEWLINE);
- return CMD_WARNING;
- }
+ GPRS_CHECK_ENABLED(bts);
bts->gprs.ctrl_ack_type_use_block = false;
@@ -3155,10 +3134,7 @@
{
struct gsm_bts *bts = vty->index;
-
Change in osmo-bsc[master]: vty: ensure that all warning messages are prefixed with '%%'
fixeria has uploaded this change for review. (
https://gerrit.osmocom.org/c/osmo-bsc/+/19550 )
Change subject: vty: ensure that all warning messages are prefixed with '%%'
..
vty: ensure that all warning messages are prefixed with '%%'
Change-Id: I6f2348c481ed43904d05b42fd7d5ce04dedbf46b
---
M src/osmo-bsc/bsc_vty.c
1 file changed, 57 insertions(+), 55 deletions(-)
git pull ssh://gerrit.osmocom.org:29418/osmo-bsc refs/changes/50/19550/1
diff --git a/src/osmo-bsc/bsc_vty.c b/src/osmo-bsc/bsc_vty.c
index e4842f7..c1228be 100644
--- a/src/osmo-bsc/bsc_vty.c
+++ b/src/osmo-bsc/bsc_vty.c
@@ -1771,7 +1771,7 @@
}
if (!new_bts) {
- vty_out(vty, "Unable to trigger handover, specified bts
#%u does not exist %s",
+ vty_out(vty, "%% Unable to trigger handover, specified
bts #%u does not exist %s",
bts_nr_new, VTY_NEWLINE);
return CMD_WARNING;
}
@@ -1793,7 +1793,7 @@
}
}
- vty_out(vty, "Unable to trigger %s, specified connection
(bts=%u,trx=%u,ts=%u,ss=%u) does not exist%s",
+ vty_out(vty, "%% Unable to trigger %s, specified connection
(bts=%u,trx=%u,ts=%u,ss=%u) does not exist%s",
action, bts_nr, trx_nr, ts_nr, ss_nr, VTY_NEWLINE);
return CMD_WARNING;
@@ -1865,7 +1865,7 @@
random_idx %= count;
}
- vty_out(vty, "Cannot find any ongoing voice calls%s", VTY_NEWLINE);
+ vty_out(vty, "%% Cannot find any ongoing voice calls%s", VTY_NEWLINE);
return NULL;
}
@@ -1892,7 +1892,7 @@
return bts;
}
}
- vty_out(vty, "Cannot find any BTS (other than BTS %u) with free %s
lchan%s",
+ vty_out(vty, "%% Cannot find any BTS (other than BTS %u) with free %s
lchan%s",
not_this_bts? not_this_bts->nr : 255,
gsm_lchant_name(free_type), VTY_NEWLINE);
return NULL;
}
@@ -2036,7 +2036,7 @@
page_group = gsm0502_calc_paging_group(>si_common.chan_desc,
str_to_imsi(argv[1]));
- vty_out(vty, "%%Paging group for IMSI %" PRIu64 " on BTS #%d is %u%s",
+ vty_out(vty, "%% Paging group for IMSI %" PRIu64 " on BTS #%d is %u%s",
str_to_imsi(argv[1]), bts->nr,
page_group, VTY_NEWLINE);
return CMD_SUCCESS;
@@ -3197,7 +3197,7 @@
enum bts_gprs_mode mode = bts_gprs_mode_parse(argv[0], NULL);
if (!bts_gprs_mode_is_compat(bts, mode)) {
- vty_out(vty, "This BTS type does not support %s%s", argv[0],
+ vty_out(vty, "%% This BTS type does not support %s%s", argv[0],
VTY_NEWLINE);
return CMD_WARNING;
}
@@ -3305,7 +3305,7 @@
type = get_string_value(osmo_sitype_strs, argv[0]);
if (type < 0) {
- vty_out(vty, "Error SI Type%s", VTY_NEWLINE);
+ vty_out(vty, "%% Error SI Type%s", VTY_NEWLINE);
return CMD_WARNING;
}
@@ -3328,12 +3328,12 @@
type = get_string_value(osmo_sitype_strs, argv[0]);
if (type < 0) {
- vty_out(vty, "Error SI Type%s", VTY_NEWLINE);
+ vty_out(vty, "%% Error SI Type%s", VTY_NEWLINE);
return CMD_WARNING;
}
if (!(bts->si_mode_static & (1 << type))) {
- vty_out(vty, "SI Type %s is not configured in static mode%s",
+ vty_out(vty, "%% SI Type %s is not configured in static mode%s",
get_value_string(osmo_sitype_strs, type), VTY_NEWLINE);
return CMD_WARNING;
}
@@ -3344,7 +3344,7 @@
/* Parse the user-specified SI in hex format, [partially] overwriting
padding */
rc = osmo_hexparse(argv[1], GSM_BTS_SI(bts, type), GSM_MACBLOCK_LEN);
if (rc < 0 || rc > GSM_MACBLOCK_LEN) {
- vty_out(vty, "Error parsing HEXSTRING%s", VTY_NEWLINE);
+ vty_out(vty, "%% Error parsing HEXSTRING%s", VTY_NEWLINE);
return CMD_WARNING;
}
@@ -3376,7 +3376,7 @@
struct gsm_bts *bts = vty->index;
if (!is_ipaccess_bts(bts) || is_sysmobts_v2(bts)) {
- vty_out(vty, "This command is only intended for ipaccess
nanoBTS. See OS#3707.%s",
+ vty_out(vty, "%% This command is only intended for ipaccess
nanoBTS. See OS#3707.%s",
VTY_NEWLINE);
return CMD_WARNING;
}
@@ -3497,24 +3497,24 @@
switch (r) {
case 1:
- vty_out(vty, "Warning: multiple threshold-high are not
supported, overriding with %u%s",
+ vty_out(vty, "%% Warning: multiple threshold-high are not
supported, overriding with %u%s",
thresh_hi, VTY_NEWLINE);
Change in osmo-bsc[master]: vty: fix missing comma in a warning message
fixeria has uploaded this change for review. (
https://gerrit.osmocom.org/c/osmo-bsc/+/19551 )
Change subject: vty: fix missing comma in a warning message
..
vty: fix missing comma in a warning message
Change-Id: I4219bff4286ddff3339d5da40b11ee360c239358
---
M src/osmo-bsc/bsc_vty.c
1 file changed, 1 insertion(+), 1 deletion(-)
git pull ssh://gerrit.osmocom.org:29418/osmo-bsc refs/changes/51/19551/1
diff --git a/src/osmo-bsc/bsc_vty.c b/src/osmo-bsc/bsc_vty.c
index c1228be..fc4ebd6 100644
--- a/src/osmo-bsc/bsc_vty.c
+++ b/src/osmo-bsc/bsc_vty.c
@@ -4770,7 +4770,7 @@
ipaccess_drop_rsl(trx, "vty");
}
} else {
- vty_out(vty, "%% Argument must be 'oml# or 'rsl'.%s",
VTY_NEWLINE);
+ vty_out(vty, "%% Argument must be 'oml' or 'rsl'.%s",
VTY_NEWLINE);
return CMD_WARNING;
}
--
To view, visit https://gerrit.osmocom.org/c/osmo-bsc/+/19551
To unsubscribe, or for help writing mail filters, visit
https://gerrit.osmocom.org/settings
Gerrit-Project: osmo-bsc
Gerrit-Branch: master
Gerrit-Change-Id: I4219bff4286ddff3339d5da40b11ee360c239358
Gerrit-Change-Number: 19551
Gerrit-PatchSet: 1
Gerrit-Owner: fixeria
Gerrit-MessageType: newchange
Change in osmo-ci[master]: osmocom-latest-packages: Remove limesuite-debian10
laforge has submitted this change. ( https://gerrit.osmocom.org/c/osmo-ci/+/19549 ) Change subject: osmocom-latest-packages: Remove limesuite-debian10 .. osmocom-latest-packages: Remove limesuite-debian10 Since LimeSuite v20.07.x has been released, we don't need a debian10 specific package anymore. Change-Id: Ibc1337e2500fc37c47a283141fad58a2fb321f05 --- M scripts/osmocom-latest-packages.sh 1 file changed, 0 insertions(+), 2 deletions(-) Approvals: laforge: Looks good to me, approved; Verified diff --git a/scripts/osmocom-latest-packages.sh b/scripts/osmocom-latest-packages.sh index 212bb4c..308efbc 100755 --- a/scripts/osmocom-latest-packages.sh +++ b/scripts/osmocom-latest-packages.sh @@ -154,11 +154,9 @@ cd "$TOP" osmo_obs_checkout_copy debian8 osmo-gsm-manuals - osmo_obs_checkout_copy debian10 limesuite build osmocom-latest build limesuite --git-upstream-tree="$(get_last_tag limesuite)" - build limesuite-debian10 --git-upstream-tree="$(get_last_tag limesuite)" build osmo-gsm-manuals build osmo-gsm-manuals-debian8 build libosmocore -- To view, visit https://gerrit.osmocom.org/c/osmo-ci/+/19549 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-ci Gerrit-Branch: master Gerrit-Change-Id: Ibc1337e2500fc37c47a283141fad58a2fb321f05 Gerrit-Change-Number: 19549 Gerrit-PatchSet: 1 Gerrit-Owner: laforge Gerrit-Reviewer: laforge Gerrit-MessageType: merged
Change in osmo-ci[master]: osmocom-latest-packages: Remove limesuite-debian10
laforge has posted comments on this change. ( https://gerrit.osmocom.org/c/osmo-ci/+/19549 ) Change subject: osmocom-latest-packages: Remove limesuite-debian10 .. Patch Set 1: Verified+1 Code-Review+2 -- To view, visit https://gerrit.osmocom.org/c/osmo-ci/+/19549 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-ci Gerrit-Branch: master Gerrit-Change-Id: Ibc1337e2500fc37c47a283141fad58a2fb321f05 Gerrit-Change-Number: 19549 Gerrit-PatchSet: 1 Gerrit-Owner: laforge Gerrit-Reviewer: laforge Gerrit-Comment-Date: Sun, 09 Aug 2020 11:04:38 + Gerrit-HasComments: No Gerrit-Has-Labels: Yes Gerrit-MessageType: comment
Change in osmo-ci[master]: osmocom-latest-packages: Remove limesuite-debian10
laforge has uploaded this change for review. ( https://gerrit.osmocom.org/c/osmo-ci/+/19549 ) Change subject: osmocom-latest-packages: Remove limesuite-debian10 .. osmocom-latest-packages: Remove limesuite-debian10 Since LimeSuite v20.07.x has been released, we don't need a debian10 specific package anymore. Change-Id: Ibc1337e2500fc37c47a283141fad58a2fb321f05 --- M scripts/osmocom-latest-packages.sh 1 file changed, 0 insertions(+), 2 deletions(-) git pull ssh://gerrit.osmocom.org:29418/osmo-ci refs/changes/49/19549/1 diff --git a/scripts/osmocom-latest-packages.sh b/scripts/osmocom-latest-packages.sh index 212bb4c..308efbc 100755 --- a/scripts/osmocom-latest-packages.sh +++ b/scripts/osmocom-latest-packages.sh @@ -154,11 +154,9 @@ cd "$TOP" osmo_obs_checkout_copy debian8 osmo-gsm-manuals - osmo_obs_checkout_copy debian10 limesuite build osmocom-latest build limesuite --git-upstream-tree="$(get_last_tag limesuite)" - build limesuite-debian10 --git-upstream-tree="$(get_last_tag limesuite)" build osmo-gsm-manuals build osmo-gsm-manuals-debian8 build libosmocore -- To view, visit https://gerrit.osmocom.org/c/osmo-ci/+/19549 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-ci Gerrit-Branch: master Gerrit-Change-Id: Ibc1337e2500fc37c47a283141fad58a2fb321f05 Gerrit-Change-Number: 19549 Gerrit-PatchSet: 1 Gerrit-Owner: laforge Gerrit-MessageType: newchange
Build failure of network:osmocom:nightly/ulfius in Debian_Unstable/x86_64
Visit
https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/ulfius/Debian_Unstable/x86_64
Package network:osmocom:nightly/ulfius failed to build in Debian_Unstable/x86_64
Check out the package for editing:
osc checkout network:osmocom:nightly ulfius
Last lines of build log:
[ 115s] /usr/src/packages/BUILD/src/ulfius.c:839:48: error: passing argument 5
of 'MHD_start_daemon' from incompatible pointer type
[-Werror=incompatible-pointer-types]
[ 115s] 839 | mhd_flags, u_instance->port, NULL, NULL,
_webservice_dispatcher, (void *)u_instance,
[ 115s] |
^
[ 115s] ||
[ 115s] |int (*)(void *,
struct MHD_Connection *, const char *, const char *, const char *, const char
*, size_t *, void **) {aka int (*)(void *, struct MHD_Connection *, const char
*, const char *, const char *, const char *, long unsigned int *, void **)}
[ 115s] In file included from /usr/src/packages/BUILD/include/ulfius.h:46,
[ 115s] from /usr/src/packages/BUILD/include/u_private.h:29,
[ 115s] from /usr/src/packages/BUILD/src/ulfius.c:29:
[ 115s] /usr/include/microhttpd.h:2428:45: note: expected
'MHD_AccessHandlerCallback' {aka 'enum MHD_Result (*)(void *, struct
MHD_Connection *, const char *, const char *, const char *, const char *, long
unsigned int *, void **)'} but argument is of type 'int (*)(void *, struct
MHD_Connection *, const char *, const char *, const char *, const char *,
size_t *, void **)' {aka 'int (*)(void *, struct MHD_Connection *, const char
*, const char *, const char *, const char *, long unsigned int *, void **)'}
[ 115s] 2428 | MHD_AccessHandlerCallback dh, void *dh_cls,
[ 115s] | ~~^~
[ 116s] cc1: all warnings being treated as errors
[ 116s] make[3]: *** [CMakeFiles/ulfius.dir/build.make:144:
CMakeFiles/ulfius.dir/src/ulfius.c.o] Error 1
[ 116s] make[3]: *** Waiting for unfinished jobs
[ 116s] make[3]: Leaving directory '/usr/src/packages/BUILD/build'
[ 116s] make[2]: *** [CMakeFiles/Makefile2:87: CMakeFiles/ulfius.dir/all]
Error 2
[ 116s] make[2]: Leaving directory '/usr/src/packages/BUILD/build'
[ 116s] make[1]: *** [Makefile:166: all] Error 2
[ 116s] make[1]: Leaving directory '/usr/src/packages/BUILD/build'
[ 116s] dh_auto_build: error: cd build && make -j4 "INSTALL=install
--strip-program=true" returned exit code 2
[ 116s] make: *** [debian/rules:9: build] Error 25
[ 116s] dpkg-buildpackage: error: debian/rules build subprocess returned exit
status 2
[ 116s] ### VM INTERACTION START ###
[ 119s] [ 99.859707] sysrq: Power Off
[ 119s] [ 99.863845] reboot: Power down
[ 119s] ### VM INTERACTION END ###
[ 119s]
[ 119s] cloud108 failed "build ulfius_2.5.2-4.1.dsc" at Sun Aug 9 09:12:27
UTC 2020.
[ 119s]
--
Configure notifications at https://build.opensuse.org/my/subscriptions
openSUSE Build Service (https://build.opensuse.org/)
Build failure of network:osmocom:latest/ulfius in Debian_Unstable/x86_64
Visit
https://build.opensuse.org/package/live_build_log/network:osmocom:latest/ulfius/Debian_Unstable/x86_64
Package network:osmocom:latest/ulfius failed to build in Debian_Unstable/x86_64
Check out the package for editing:
osc checkout network:osmocom:latest ulfius
Last lines of build log:
[ 123s] /usr/src/packages/BUILD/src/ulfius.c:839:48: error: passing argument 5
of 'MHD_start_daemon' from incompatible pointer type
[-Werror=incompatible-pointer-types]
[ 123s] 839 | mhd_flags, u_instance->port, NULL, NULL,
_webservice_dispatcher, (void *)u_instance,
[ 123s] |
^
[ 123s] ||
[ 123s] |int (*)(void *,
struct MHD_Connection *, const char *, const char *, const char *, const char
*, size_t *, void **) {aka int (*)(void *, struct MHD_Connection *, const char
*, const char *, const char *, const char *, long unsigned int *, void **)}
[ 123s] In file included from /usr/src/packages/BUILD/include/ulfius.h:46,
[ 123s] from /usr/src/packages/BUILD/include/u_private.h:29,
[ 123s] from /usr/src/packages/BUILD/src/ulfius.c:29:
[ 123s] /usr/include/microhttpd.h:2428:45: note: expected
'MHD_AccessHandlerCallback' {aka 'enum MHD_Result (*)(void *, struct
MHD_Connection *, const char *, const char *, const char *, const char *, long
unsigned int *, void **)'} but argument is of type 'int (*)(void *, struct
MHD_Connection *, const char *, const char *, const char *, const char *,
size_t *, void **)' {aka 'int (*)(void *, struct MHD_Connection *, const char
*, const char *, const char *, const char *, long unsigned int *, void **)'}
[ 123s] 2428 | MHD_AccessHandlerCallback dh, void *dh_cls,
[ 123s] | ~~^~
[ 124s] cc1: all warnings being treated as errors
[ 124s] make[3]: *** [CMakeFiles/ulfius.dir/build.make:144:
CMakeFiles/ulfius.dir/src/ulfius.c.o] Error 1
[ 124s] make[3]: *** Waiting for unfinished jobs
[ 124s] make[3]: Leaving directory '/usr/src/packages/BUILD/build'
[ 124s] make[2]: *** [CMakeFiles/Makefile2:87: CMakeFiles/ulfius.dir/all]
Error 2
[ 124s] make[2]: Leaving directory '/usr/src/packages/BUILD/build'
[ 124s] make[1]: *** [Makefile:166: all] Error 2
[ 124s] make[1]: Leaving directory '/usr/src/packages/BUILD/build'
[ 124s] dh_auto_build: error: cd build && make -j8 "INSTALL=install
--strip-program=true" returned exit code 2
[ 124s] make: *** [debian/rules:9: build] Error 25
[ 124s] dpkg-buildpackage: error: debian/rules build subprocess returned exit
status 2
[ 124s] ### VM INTERACTION START ###
[ 127s] [ 116.194658] sysrq: Power Off
[ 127s] [ 116.200346] reboot: Power down
[ 127s] ### VM INTERACTION END ###
[ 127s]
[ 127s] lamb12 failed "build ulfius_2.5.2-4.1.dsc" at Sun Aug 9 09:12:51 UTC
2020.
[ 127s]
--
Configure notifications at https://build.opensuse.org/my/subscriptions
openSUSE Build Service (https://build.opensuse.org/)
Build failure of network:osmocom:nightly/simtrace2 in Debian_Unstable/x86_64
Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/simtrace2/Debian_Unstable/x86_64 Package network:osmocom:nightly/simtrace2 failed to build in Debian_Unstable/x86_64 Check out the package for editing: osc checkout network:osmocom:nightly simtrace2 Last lines of build log: [ 83s] [COMPILING apps/dfu/main.c] [ 83s] [COMPILING ./atmel_softpack_libraries/usb/device/dfu/dfu.c] [ 83s] [COMPILING ./atmel_softpack_libraries/usb/device/dfu/dfu_desc.c] [ 83s] [COMPILING ./atmel_softpack_libraries/usb/device/dfu/dfu_driver.c] [ 83s] Memory region Used Size Region Size %age Used [ 83s] rom: 16464 B16 KB100.49% [ 83s] ram: 11672 B48 KB 23.75/usr/lib/gcc/arm-none-eabi/8.3.1/../../../arm-none-eabi/bin/ld: warning: changing start of section .stack by 4 bytes [ 83s] /usr/lib/gcc/arm-none-eabi/8.3.1/../../../arm-none-eabi/bin/ld: warning: changing start of section .stack by 4 bytes [ 83s] /usr/lib/gcc/arm-none-eabi/8.3.1/../../../arm-none-eabi/bin/ld: bin/qmod-dfu-flash.elf section `.text' will not fit in region `rom' [ 83s] /usr/lib/gcc/arm-none-eabi/8.3.1/../../../arm-none-eabi/bin/ld: warning: changing start of section .stack by 4 bytes [ 83s] /usr/lib/gcc/arm-none-eabi/8.3.1/../../../arm-none-eabi/bin/ld: warning: changing start of section .stack by 4 bytes [ 83s] /usr/lib/gcc/arm-none-eabi/8.3.1/../../../arm-none-eabi/bin/ld: warning: changing start of section .stack by 4 bytes [ 83s] /usr/lib/gcc/arm-none-eabi/8.3.1/../../../arm-none-eabi/bin/ld: region `rom' overflowed by 80 bytes [ 83s] collect2: error: ld returned 1 exit status [ 83s] % [ 83s] make[2]: *** [Makefile:234: flash] Error 1 [ 83s] make[2]: Leaving directory '/usr/src/packages/BUILD/firmware' [ 83s] make[1]: *** [Makefile:13: fw-qmod-dfu] Error 2 [ 83s] make[1]: Leaving directory '/usr/src/packages/BUILD' [ 83s] dh_auto_build: error: make -j1 returned exit code 2 [ 83s] make: *** [debian/rules:16: build] Error 25 [ 83s] dpkg-buildpackage: error: debian/rules build subprocess returned exit status 2 [ 83s] ### VM INTERACTION START ### [ 86s] [ 78.719118] sysrq: Power Off [ 86s] [ 78.725344] reboot: Power down [ 86s] ### VM INTERACTION END ### [ 86s] [ 86s] goat17 failed "build simtrace2_0.7.0.61.1afb7.dsc" at Sun Aug 9 09:10:54 UTC 2020. [ 86s] -- Configure notifications at https://build.opensuse.org/my/subscriptions openSUSE Build Service (https://build.opensuse.org/)
Build failure of network:osmocom:nightly/simtrace2 in Raspbian_10/armv7l
Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/simtrace2/Raspbian_10/armv7l Package network:osmocom:nightly/simtrace2 failed to build in Raspbian_10/armv7l Check out the package for editing: osc checkout network:osmocom:nightly simtrace2 Last lines of build log: [ 234s] [COMPILING libboard/qmod/source/wwan_perst.c] [ 235s] [COMPILING libboard/qmod/source/card_pres.c] [ 235s] [COMPILING libboard/qmod/source/wwan_led.c] [ 235s] [COMPILING libboard/qmod/source/i2c.c] [ 235s] [COMPILING libboard/qmod/source/board_qmod.c] [ 236s] [COMPILING apps/dfu/main.c] [ 236s] [COMPILING ./atmel_softpack_libraries/usb/device/dfu/dfu.c] [ 236s] [COMPILING ./atmel_softpack_libraries/usb/device/dfu/dfu_desc.c] [ 236s] [COMPILING ./atmel_softpack_libraries/usb/device/dfu/dfu_driver.c] [ 237s] Memory region Used Size Region Size %age Used [ 237s] rom: 16504 B16 KB100.73% [ 237s] ram: 11672 B48 KB 23.75/usr/lib/gcc/arm-none-eabi/7.3.1/../../../arm-none-eabi/bin/ld: bin/qmod-dfu-flash.elf section `.text' will not fit in region `rom' [ 237s] /usr/lib/gcc/arm-none-eabi/7.3.1/../../../arm-none-eabi/bin/ld: region `rom' overflowed by 120 bytes [ 237s] collect2: error: ld returned 1 exit status [ 237s] % [ 237s] make[2]: *** [Makefile:234: flash] Error 1 [ 237s] make[2]: Leaving directory '/usr/src/packages/BUILD/firmware' [ 237s] make[1]: *** [Makefile:13: fw-qmod-dfu] Error 2 [ 237s] make[1]: Leaving directory '/usr/src/packages/BUILD' [ 237s] dh_auto_build: make -j1 returned exit code 2 [ 237s] make: *** [debian/rules:16: build] Error 2 [ 237s] dpkg-buildpackage: error: debian/rules build subprocess returned exit status 2 [ 237s] ### VM INTERACTION START ### [ 240s] [ 214.037370] sysrq: SysRq : Power Off [ 240s] [ 214.038886] reboot: Power down [ 240s] ### VM INTERACTION END ### [ 240s] [ 240s] armbuild02 failed "build simtrace2_0.7.0.61.1afb7.dsc" at Sun Aug 9 08:06:31 UTC 2020. [ 240s] -- Configure notifications at https://build.opensuse.org/my/subscriptions openSUSE Build Service (https://build.opensuse.org/)
Build failure of network:osmocom:nightly/simtrace2 in Debian_9.0/armv7l
Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/simtrace2/Debian_9.0/armv7l Package network:osmocom:nightly/simtrace2 failed to build in Debian_9.0/armv7l Check out the package for editing: osc checkout network:osmocom:nightly simtrace2 Last lines of build log: [ 189s] [COMPILING libboard/qmod/source/i2c.c] [ 189s] [COMPILING libboard/qmod/source/board_qmod.c] [ 189s] [COMPILING apps/dfu/main.c] [ 190s] [COMPILING ./atmel_softpack_libraries/usb/device/dfu/dfu.c] [ 190s] [COMPILING ./atmel_softpack_libraries/usb/device/dfu/dfu_desc.c] [ 190s] [COMPILING ./atmel_softpack_libraries/usb/device/dfu/dfu_driver.c] [ 191s] Memory region Used Size Region Size %age Used [ 191s] rom: 16584 B16 KB101.22% [ 191s] ram: 11672 B48 KB 23.75/usr/lib/gcc/arm-none-eabi/5.4.1/../../../arm-none-eabi/bin/ld: bin/qmod-dfu-flash.elf section `.text' will not fit in region `rom' [ 191s] /usr/lib/gcc/arm-none-eabi/5.4.1/../../../arm-none-eabi/bin/ld: region `rom' overflowed by 200 bytes [ 191s] collect2: error: ld returned 1 exit status [ 191s] % [ 191s] Makefile:234: recipe for target 'flash' failed [ 191s] make[2]: *** [flash] Error 1 [ 191s] make[2]: Leaving directory '/usr/src/packages/BUILD/firmware' [ 191s] Makefile:13: recipe for target 'fw-qmod-dfu' failed [ 191s] make[1]: *** [fw-qmod-dfu] Error 2 [ 191s] make[1]: Leaving directory '/usr/src/packages/BUILD' [ 191s] dh_auto_build: make -j1 returned exit code 2 [ 191s] debian/rules:16: recipe for target 'build' failed [ 191s] make: *** [build] Error 2 [ 191s] dpkg-buildpackage: error: debian/rules build gave error exit status 2 [ 191s] ### VM INTERACTION START ### [ 194s] [ 180.656450] sysrq: SysRq : Power Off [ 194s] [ 180.658196] reboot: Power down [ 194s] ### VM INTERACTION END ### [ 194s] [ 194s] armbuild21 failed "build simtrace2_0.7.0.61.1afb7.dsc" at Sun Aug 9 07:53:21 UTC 2020. [ 194s] -- Configure notifications at https://build.opensuse.org/my/subscriptions openSUSE Build Service (https://build.opensuse.org/)
Build failure of network:osmocom:nightly/simtrace2 in Debian_10/armv7l
Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/simtrace2/Debian_10/armv7l Package network:osmocom:nightly/simtrace2 failed to build in Debian_10/armv7l Check out the package for editing: osc checkout network:osmocom:nightly simtrace2 Last lines of build log: [ 595s] [COMPILING libboard/qmod/source/wwan_perst.c] [ 595s] [COMPILING libboard/qmod/source/card_pres.c] [ 596s] [COMPILING libboard/qmod/source/wwan_led.c] [ 596s] [COMPILING libboard/qmod/source/i2c.c] [ 596s] [COMPILING libboard/qmod/source/board_qmod.c] [ 597s] [COMPILING apps/dfu/main.c] [ 597s] [COMPILING ./atmel_softpack_libraries/usb/device/dfu/dfu.c] [ 598s] [COMPILING ./atmel_softpack_libraries/usb/device/dfu/dfu_desc.c] [ 598s] [COMPILING ./atmel_softpack_libraries/usb/device/dfu/dfu_driver.c] [ 599s] Memory region Used Size Region Size %age Used [ 599s] rom: 16504 B16 KB100.73% [ 599s] ram: 11672 B48 KB 23.75/usr/lib/gcc/arm-none-eabi/7.3.1/../../../arm-none-eabi/bin/ld: bin/qmod-dfu-flash.elf section `.text' will not fit in region `rom' [ 599s] /usr/lib/gcc/arm-none-eabi/7.3.1/../../../arm-none-eabi/bin/ld: region `rom' overflowed by 120 bytes [ 599s] collect2: error: ld returned 1 exit status [ 599s] % [ 599s] make[2]: *** [Makefile:234: flash] Error 1 [ 599s] make[2]: Leaving directory '/usr/src/packages/BUILD/firmware' [ 599s] make[1]: *** [Makefile:13: fw-qmod-dfu] Error 2 [ 599s] make[1]: Leaving directory '/usr/src/packages/BUILD' [ 599s] dh_auto_build: make -j1 returned exit code 2 [ 599s] make: *** [debian/rules:16: build] Error 2 [ 599s] dpkg-buildpackage: error: debian/rules build subprocess returned exit status 2 [ 599s] ### VM INTERACTION START ### [ 602s] [ 573.736120] sysrq: SysRq : Power Off [ 602s] [ 573.759652] reboot: Power down [ 603s] ### VM INTERACTION END ### [ 603s] [ 603s] obs-arm-5 failed "build simtrace2_0.7.0.61.1afb7.dsc" at Sun Aug 9 07:11:43 UTC 2020. [ 603s] -- Configure notifications at https://build.opensuse.org/my/subscriptions openSUSE Build Service (https://build.opensuse.org/)
