Gitweb:
http://git.kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=f4d640c9be1979a603ed017e1e03a16ba3a4d7a1
Commit: f4d640c9be1979a603ed017e1e03a16ba3a4d7a1
Parent: db83b991bce1b4792125d4b23bb108e8cfd5d366
Author: Roy Huang <[EMAIL PROTECTED]>
AuthorDate: Thu Jul 12 16:43:46 2007 +0800
Committer: Bryan Wu <[EMAIL PROTECTED]>
CommitDate: Thu Jul 12 16:43:46 2007 +0800
Blackfin serial driver: supporting BF548-EZKIT serial port
Signed-off-by: Roy Huang <[EMAIL PROTECTED]>
Signed-off-by: Mike Frysinger <[EMAIL PROTECTED]>
Signed-off-by: Bryan Wu <[EMAIL PROTECTED]>
---
drivers/serial/Kconfig | 46 +++++++++++++++++++++++++--
drivers/serial/bfin_5xx.c | 77 +++++++++++++++++++++++++++++++++++++++++++--
2 files changed, 117 insertions(+), 6 deletions(-)
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 71a4ac5..2adbed4 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -599,7 +599,7 @@ config UART0_RTS_PIN
config SERIAL_BFIN_UART1
bool "Enable UART1"
- depends on SERIAL_BFIN && (BF534 || BF536 || BF537)
+ depends on SERIAL_BFIN && (BF534 || BF536 || BF537 || BF54x)
help
Enable UART1
@@ -612,18 +612,58 @@ config BFIN_UART1_CTSRTS
config UART1_CTS_PIN
int "UART1 CTS pin"
- depends on BFIN_UART1_CTSRTS
+ depends on BFIN_UART1_CTSRTS && (BF53x || BF561)
default -1
help
Refer to ./include/asm-blackfin/gpio.h to see the GPIO map.
config UART1_RTS_PIN
int "UART1 RTS pin"
- depends on BFIN_UART1_CTSRTS
+ depends on BFIN_UART1_CTSRTS && (BF53x || BF561)
default -1
help
Refer to ./include/asm-blackfin/gpio.h to see the GPIO map.
+config SERIAL_BFIN_UART2
+ bool "Enable UART2"
+ depends on SERIAL_BFIN && (BF54x)
+ help
+ Enable UART2
+
+config BFIN_UART2_CTSRTS
+ bool "Enable UART2 hardware flow control"
+ depends on SERIAL_BFIN_UART2
+ help
+ Enable hardware flow control in the driver. Using GPIO emulate the
CTS/RTS
+ signal.
+
+config UART2_CTS_PIN
+ int "UART2 CTS pin"
+ depends on BFIN_UART2_CTSRTS
+ default -1
+ help
+ Refer to ./include/asm-blackfin/gpio.h to see the GPIO map.
+
+config UART2_RTS_PIN
+ int "UART2 RTS pin"
+ depends on BFIN_UART2_CTSRTS
+ default -1
+ help
+ Refer to ./include/asm-blackfin/gpio.h to see the GPIO map.
+
+config SERIAL_BFIN_UART3
+ bool "Enable UART3"
+ depends on SERIAL_BFIN && (BF54x)
+ help
+ Enable UART3
+
+config BFIN_UART3_CTSRTS
+ bool "Enable UART3 hardware flow control"
+ depends on SERIAL_BFIN_UART3
+ help
+ Enable hardware flow control in the driver. Using GPIO emulate the
CTS/RTS
+ signal.
+
config SERIAL_IMX
bool "IMX serial port support"
depends on ARM && ARCH_IMX
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index f7926dc..66c92bc 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -86,15 +86,29 @@ static void bfin_serial_stop_tx(struct uart_port *port)
{
struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
+#ifdef CONFIG_BF54x
+ while (!(UART_GET_LSR(uart) & TEMT))
+ continue;
+#endif
+
#ifdef CONFIG_SERIAL_BFIN_DMA
disable_dma(uart->tx_dma_channel);
#else
+#ifdef CONFIG_BF54x
+ /* Waiting for Transmission Finished */
+ while (!(UART_GET_LSR(uart) & TFI))
+ continue;
+ /* Clear TFI bit */
+ UART_PUT_LSR(uart, TFI);
+ UART_CLEAR_IER(uart, ETBEI);
+#else
unsigned short ier;
ier = UART_GET_IER(uart);
ier &= ~ETBEI;
UART_PUT_IER(uart, ier);
#endif
+#endif
}
/*
@@ -107,12 +121,16 @@ static void bfin_serial_start_tx(struct uart_port *port)
#ifdef CONFIG_SERIAL_BFIN_DMA
bfin_serial_dma_tx_chars(uart);
#else
+#ifdef CONFIG_BF54x
+ UART_SET_IER(uart, ETBEI);
+#else
unsigned short ier;
ier = UART_GET_IER(uart);
ier |= ETBEI;
UART_PUT_IER(uart, ier);
bfin_serial_tx_chars(uart);
#endif
+#endif
}
/*
@@ -121,6 +139,9 @@ static void bfin_serial_start_tx(struct uart_port *port)
static void bfin_serial_stop_rx(struct uart_port *port)
{
struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
+#ifdef CONFIG_BF54x
+ UART_CLEAR_IER(uart, ERBFI);
+#else
unsigned short ier;
ier = UART_GET_IER(uart);
@@ -129,6 +150,7 @@ static void bfin_serial_stop_rx(struct uart_port *port)
#endif
ier &= ~ERBFI;
UART_PUT_IER(uart, ier);
+#endif
}
/*
@@ -325,10 +347,21 @@ static irqreturn_t bfin_serial_rx_int(int irq, void
*dev_id)
{
struct bfin_serial_port *uart = dev_id;
+#ifdef CONFIG_BF54x
+ unsigned short status;
+ spin_lock(&uart->port.lock);
+ status = UART_GET_LSR(uart);
+ while ((UART_GET_IER(uart) & ERBFI) && (status & DR)) {
+ bfin_serial_rx_chars(uart);
+ status = UART_GET_LSR(uart);
+ }
+ spin_unlock(&uart->port.lock);
+#else
spin_lock(&uart->port.lock);
while ((UART_GET_IIR(uart) & IIR_STATUS) == IIR_RX_READY)
bfin_serial_rx_chars(uart);
spin_unlock(&uart->port.lock);
+#endif
return IRQ_HANDLED;
}
@@ -336,10 +369,21 @@ static irqreturn_t bfin_serial_tx_int(int irq, void
*dev_id)
{
struct bfin_serial_port *uart = dev_id;
+#ifdef CONFIG_BF54x
+ unsigned short status;
+ spin_lock(&uart->port.lock);
+ status = UART_GET_LSR(uart);
+ while ((UART_GET_IER(uart) & ETBEI) && (status & THRE)) {
+ bfin_serial_tx_chars(uart);
+ status = UART_GET_LSR(uart);
+ }
+ spin_unlock(&uart->port.lock);
+#else
spin_lock(&uart->port.lock);
while ((UART_GET_IIR(uart) & IIR_STATUS) == IIR_TX_READY)
bfin_serial_tx_chars(uart);
spin_unlock(&uart->port.lock);
+#endif
return IRQ_HANDLED;
}
@@ -350,7 +394,6 @@ static void bfin_serial_do_work(struct work_struct *work)
bfin_serial_mctrl_check(uart);
}
-
#endif
#ifdef CONFIG_SERIAL_BFIN_DMA
@@ -399,9 +442,13 @@ static void bfin_serial_dma_tx_chars(struct
bfin_serial_port *uart)
set_dma_x_count(uart->tx_dma_channel, uart->tx_count);
set_dma_x_modify(uart->tx_dma_channel, 1);
enable_dma(uart->tx_dma_channel);
+#ifdef CONFIG_BF54x
+ UART_SET_IER(uart, ETBEI);
+#else
ier = UART_GET_IER(uart);
ier |= ETBEI;
UART_PUT_IER(uart, ier);
+#endif
spin_unlock_irqrestore(&uart->port.lock, flags);
}
@@ -481,9 +528,13 @@ static irqreturn_t bfin_serial_dma_tx_int(int irq, void
*dev_id)
if (!(get_dma_curr_irqstat(uart->tx_dma_channel)&DMA_RUN)) {
clear_dma_irqstat(uart->tx_dma_channel);
disable_dma(uart->tx_dma_channel);
+#ifdef CONFIG_BF54x
+ UART_CLEAR_IER(uart, ETBEI);
+#else
ier = UART_GET_IER(uart);
ier &= ~ETBEI;
UART_PUT_IER(uart, ier);
+#endif
xmit->tail = (xmit->tail+uart->tx_count) &(UART_XMIT_SIZE -1);
uart->port.icount.tx+=uart->tx_count;
@@ -665,7 +716,11 @@ static int bfin_serial_startup(struct uart_port *port)
return -EBUSY;
}
#endif
+#ifdef CONFIG_BF54x
+ UART_SET_IER(uart, ERBFI);
+#else
UART_PUT_IER(uart, UART_GET_IER(uart) | ERBFI);
+#endif
return 0;
}
@@ -756,29 +811,41 @@ bfin_serial_set_termios(struct uart_port *port, struct
ktermios *termios,
/* Disable UART */
ier = UART_GET_IER(uart);
+#ifdef CONFIG_BF54x
+ UART_CLEAR_IER(uart, 0xF);
+#else
UART_PUT_IER(uart, 0);
+#endif
+#ifndef CONFIG_BF54x
/* Set DLAB in LCR to Access DLL and DLH */
val = UART_GET_LCR(uart);
val |= DLAB;
UART_PUT_LCR(uart, val);
SSYNC();
+#endif
UART_PUT_DLL(uart, quot & 0xFF);
SSYNC();
UART_PUT_DLH(uart, (quot >> 8) & 0xFF);
SSYNC();
+#ifndef CONFIG_BF54x
/* Clear DLAB in LCR to Access THR RBR IER */
val = UART_GET_LCR(uart);
val &= ~DLAB;
UART_PUT_LCR(uart, val);
SSYNC();
+#endif
UART_PUT_LCR(uart, lcr);
/* Enable UART */
+#ifdef CONFIG_BF54x
+ UART_SET_IER(uart, ier);
+#else
UART_PUT_IER(uart, ier);
+#endif
val = UART_GET_GCTL(uart);
val |= UCEN;
@@ -890,15 +957,15 @@ static void __init bfin_serial_init_ports(void)
bfin_serial_resource[i].uart_rts_pin;
#endif
bfin_serial_hw_init(&bfin_serial_ports[i]);
-
}
+
}
#ifdef CONFIG_SERIAL_BFIN_CONSOLE
static void bfin_serial_console_putchar(struct uart_port *port, int ch)
{
struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
- while (!(UART_GET_LSR(uart)))
+ while (!(UART_GET_LSR(uart) & THRE))
barrier();
UART_PUT_CHAR(uart, ch);
SSYNC();
@@ -950,18 +1017,22 @@ bfin_serial_console_get_options(struct bfin_serial_port
*uart, int *baud,
case 2: *bits = 7; break;
case 3: *bits = 8; break;
}
+#ifndef CONFIG_BF54x
/* Set DLAB in LCR to Access DLL and DLH */
val = UART_GET_LCR(uart);
val |= DLAB;
UART_PUT_LCR(uart, val);
+#endif
dll = UART_GET_DLL(uart);
dlh = UART_GET_DLH(uart);
+#ifndef CONFIG_BF54x
/* Clear DLAB in LCR to Access THR RBR IER */
val = UART_GET_LCR(uart);
val &= ~DLAB;
UART_PUT_LCR(uart, val);
+#endif
*baud = get_sclk() / (16*(dll | dlh << 8));
}
-
To unsubscribe from this list: send the line "unsubscribe git-commits-head" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
