Re: [Gluster-devel] Gluster on RHEL 8
Thank you very much! Everything is working now. I've gathered several technical difficulties such as such that I've encountered during setup. Maybe in the future, once I have better understanding of Gluster. I could update documentation and help future users :) Cheers, Barak On Tue, Jul 23, 2019 at 3:55 PM Kaleb Keithley wrote: > You still have to install rpcgen before building. The build process isn't > going to do that for you. > > > On Tue, Jul 23, 2019 at 8:16 AM Barak Sason wrote: > >> Hello again Kaleb, >> >> Thank you for the clarification - at least now I know where the rpcgen is. >> Unfortunately, the problem still persists. >> >> I'm attaching the repo file and terminal output. >> Might you have any idea what I'm doing wrong? >> >> Thank you very much for your assistance, >> >> Barak >> >> On Tue, Jul 23, 2019 at 2:40 PM Kaleb Keithley >> wrote: >> >>> rpcgen is in the CRB (codeready-builder) repo. >>> >>> >>> >>> Package ArchVersionRepository >>> Size >>> >>> >>> Installing: >>> rpcgen x86_64 1.3.1-4.el8 >>> codeready-builder-for-rhel-8-x86_64-rpms 52 k >>> >>> Transaction Summary >>> >>> >>> >>> Make sure that the codeready-builder-for-rhel-8-x86_64-rpms repo is >>> enabled (enabled = 1) in /etc/yum.repos.d/redhat.repo or or run dnf with >>> `... --enable codeready-builder-for-rhel-8-x86_64-rpms ...` >>> >>> -- >>> >>> Kaleb >>> >>> >>> On Tue, Jul 23, 2019 at 7:31 AM Barak Sason wrote: >>> Greeting Kaleb, Thank you for the clarification. Though, I did try to install rpcgen package, but without success (libtirpc-devel package is installed). I'm attaching relevant terminal output. What am I missing? Barak On Tue, Jul 23, 2019 at 2:25 PM Kaleb Keithley wrote: > > you must not use --without-libtirpc on RHEL8. > > rpcgen is in the rpcgen package on RHEL8 and Fedora 29+ > > -- > > Kaleb > > > On Tue, Jul 23, 2019 at 7:11 AM Barak Sason > wrote: > >> Greeting all, >> >> I've made a fresh installation of RHEL 8 on a VM and have been trying >> to set up Gluster on that system. >> >> Running ./autogen.sh completes OK, but running ./config results in an >> error regarding missing 'rpcgen'. >> 'libtirpc-devel package is installed. >> Running ./configure --without-libtirp results in the same error. >> I'm attaching reverent terminal output. >> I'm currently out of ideas. >> >> I appreciate any help you may offer, >> >> Barak >> ___ >> >> Community Meeting Calendar: >> >> APAC Schedule - >> Every 2nd and 4th Tuesday at 11:30 AM IST >> Bridge: https://bluejeans.com/836554017 >> >> NA/EMEA Schedule - >> Every 1st and 3rd Tuesday at 01:00 PM EDT >> Bridge: https://bluejeans.com/486278655 >> >> Gluster-devel mailing list >> Gluster-devel@gluster.org >> https://lists.gluster.org/mailman/listinfo/gluster-devel >> >> ___ Community Meeting Calendar: APAC Schedule - Every 2nd and 4th Tuesday at 11:30 AM IST Bridge: https://bluejeans.com/836554017 NA/EMEA Schedule - Every 1st and 3rd Tuesday at 01:00 PM EDT Bridge: https://bluejeans.com/486278655 Gluster-devel mailing list Gluster-devel@gluster.org https://lists.gluster.org/mailman/listinfo/gluster-devel
Re: [Gluster-devel] Gluster on RHEL 8
You still have to install rpcgen before building. The build process isn't going to do that for you. On Tue, Jul 23, 2019 at 8:16 AM Barak Sason wrote: > Hello again Kaleb, > > Thank you for the clarification - at least now I know where the rpcgen is. > Unfortunately, the problem still persists. > > I'm attaching the repo file and terminal output. > Might you have any idea what I'm doing wrong? > > Thank you very much for your assistance, > > Barak > > On Tue, Jul 23, 2019 at 2:40 PM Kaleb Keithley > wrote: > >> rpcgen is in the CRB (codeready-builder) repo. >> >> >> >> Package ArchVersionRepository >> Size >> >> >> Installing: >> rpcgen x86_64 1.3.1-4.el8codeready-builder-for-rhel-8-x86_64-rpms >> 52 k >> >> Transaction Summary >> >> >> >> Make sure that the codeready-builder-for-rhel-8-x86_64-rpms repo is >> enabled (enabled = 1) in /etc/yum.repos.d/redhat.repo or or run dnf with >> `... --enable codeready-builder-for-rhel-8-x86_64-rpms ...` >> >> -- >> >> Kaleb >> >> >> On Tue, Jul 23, 2019 at 7:31 AM Barak Sason wrote: >> >>> Greeting Kaleb, >>> >>> Thank you for the clarification. >>> >>> Though, I did try to install rpcgen package, but without success >>> (libtirpc-devel >>> package is installed). >>> I'm attaching relevant terminal output. >>> >>> What am I missing? >>> >>> Barak >>> >>> On Tue, Jul 23, 2019 at 2:25 PM Kaleb Keithley >>> wrote: >>> you must not use --without-libtirpc on RHEL8. rpcgen is in the rpcgen package on RHEL8 and Fedora 29+ -- Kaleb On Tue, Jul 23, 2019 at 7:11 AM Barak Sason wrote: > Greeting all, > > I've made a fresh installation of RHEL 8 on a VM and have been trying > to set up Gluster on that system. > > Running ./autogen.sh completes OK, but running ./config results in an > error regarding missing 'rpcgen'. > 'libtirpc-devel package is installed. > Running ./configure --without-libtirp results in the same error. > I'm attaching reverent terminal output. > I'm currently out of ideas. > > I appreciate any help you may offer, > > Barak > ___ > > Community Meeting Calendar: > > APAC Schedule - > Every 2nd and 4th Tuesday at 11:30 AM IST > Bridge: https://bluejeans.com/836554017 > > NA/EMEA Schedule - > Every 1st and 3rd Tuesday at 01:00 PM EDT > Bridge: https://bluejeans.com/486278655 > > Gluster-devel mailing list > Gluster-devel@gluster.org > https://lists.gluster.org/mailman/listinfo/gluster-devel > > ___ Community Meeting Calendar: APAC Schedule - Every 2nd and 4th Tuesday at 11:30 AM IST Bridge: https://bluejeans.com/836554017 NA/EMEA Schedule - Every 1st and 3rd Tuesday at 01:00 PM EDT Bridge: https://bluejeans.com/486278655 Gluster-devel mailing list Gluster-devel@gluster.org https://lists.gluster.org/mailman/listinfo/gluster-devel
Re: [Gluster-devel] Gluster on RHEL 8
Hello again Kaleb, Thank you for the clarification - at least now I know where the rpcgen is. Unfortunately, the problem still persists. I'm attaching the repo file and terminal output. Might you have any idea what I'm doing wrong? Thank you very much for your assistance, Barak On Tue, Jul 23, 2019 at 2:40 PM Kaleb Keithley wrote: > rpcgen is in the CRB (codeready-builder) repo. > > > > Package ArchVersionRepository > Size > > > Installing: > rpcgen x86_64 1.3.1-4.el8codeready-builder-for-rhel-8-x86_64-rpms > 52 k > > Transaction Summary > > > > Make sure that the codeready-builder-for-rhel-8-x86_64-rpms repo is > enabled (enabled = 1) in /etc/yum.repos.d/redhat.repo or or run dnf with > `... --enable codeready-builder-for-rhel-8-x86_64-rpms ...` > > -- > > Kaleb > > > On Tue, Jul 23, 2019 at 7:31 AM Barak Sason wrote: > >> Greeting Kaleb, >> >> Thank you for the clarification. >> >> Though, I did try to install rpcgen package, but without success >> (libtirpc-devel >> package is installed). >> I'm attaching relevant terminal output. >> >> What am I missing? >> >> Barak >> >> On Tue, Jul 23, 2019 at 2:25 PM Kaleb Keithley >> wrote: >> >>> >>> you must not use --without-libtirpc on RHEL8. >>> >>> rpcgen is in the rpcgen package on RHEL8 and Fedora 29+ >>> >>> -- >>> >>> Kaleb >>> >>> >>> On Tue, Jul 23, 2019 at 7:11 AM Barak Sason wrote: >>> Greeting all, I've made a fresh installation of RHEL 8 on a VM and have been trying to set up Gluster on that system. Running ./autogen.sh completes OK, but running ./config results in an error regarding missing 'rpcgen'. 'libtirpc-devel package is installed. Running ./configure --without-libtirp results in the same error. I'm attaching reverent terminal output. I'm currently out of ideas. I appreciate any help you may offer, Barak ___ Community Meeting Calendar: APAC Schedule - Every 2nd and 4th Tuesday at 11:30 AM IST Bridge: https://bluejeans.com/836554017 NA/EMEA Schedule - Every 1st and 3rd Tuesday at 01:00 PM EDT Bridge: https://bluejeans.com/486278655 Gluster-devel mailing list Gluster-devel@gluster.org https://lists.gluster.org/mailman/listinfo/gluster-devel [root@localhost src]# subscription-manager repos --enable codeready-builder-for-rhel-8-x86_64-rpms Repository 'codeready-builder-for-rhel-8-x86_64-rpms' is enabled for this system. [root@localhost src]# dnf upgrade Updating Subscription Management repositories. Last metadata expiration check: 0:05:06 ago on Tue 23 Jul 2019 03:06:19 PM IDT. Dependencies resolved. Nothing to do. Complete! [root@localhost src]# ./configure checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /usr/bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking how to create a pax tar archive... gnutar checking whether make supports nested variables... (cached) yes checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking whether make supports the include directive... yes (GNU style) checking dependency style of gcc... gcc3 checking how to print strings... printf checking for a sed that does not truncate output... /usr/bin/sed checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for fgrep... /usr/bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r
Re: [Gluster-devel] Gluster on RHEL 8
rpcgen is in the CRB (codeready-builder) repo. Package ArchVersionRepository Size Installing: rpcgen x86_64 1.3.1-4.el8codeready-builder-for-rhel-8-x86_64-rpms 52 k Transaction Summary Make sure that the codeready-builder-for-rhel-8-x86_64-rpms repo is enabled (enabled = 1) in /etc/yum.repos.d/redhat.repo or or run dnf with `... --enable codeready-builder-for-rhel-8-x86_64-rpms ...` -- Kaleb On Tue, Jul 23, 2019 at 7:31 AM Barak Sason wrote: > Greeting Kaleb, > > Thank you for the clarification. > > Though, I did try to install rpcgen package, but without success > (libtirpc-devel > package is installed). > I'm attaching relevant terminal output. > > What am I missing? > > Barak > > On Tue, Jul 23, 2019 at 2:25 PM Kaleb Keithley > wrote: > >> >> you must not use --without-libtirpc on RHEL8. >> >> rpcgen is in the rpcgen package on RHEL8 and Fedora 29+ >> >> -- >> >> Kaleb >> >> >> On Tue, Jul 23, 2019 at 7:11 AM Barak Sason wrote: >> >>> Greeting all, >>> >>> I've made a fresh installation of RHEL 8 on a VM and have been trying to >>> set up Gluster on that system. >>> >>> Running ./autogen.sh completes OK, but running ./config results in an >>> error regarding missing 'rpcgen'. >>> 'libtirpc-devel package is installed. >>> Running ./configure --without-libtirp results in the same error. >>> I'm attaching reverent terminal output. >>> I'm currently out of ideas. >>> >>> I appreciate any help you may offer, >>> >>> Barak >>> ___ >>> >>> Community Meeting Calendar: >>> >>> APAC Schedule - >>> Every 2nd and 4th Tuesday at 11:30 AM IST >>> Bridge: https://bluejeans.com/836554017 >>> >>> NA/EMEA Schedule - >>> Every 1st and 3rd Tuesday at 01:00 PM EDT >>> Bridge: https://bluejeans.com/486278655 >>> >>> Gluster-devel mailing list >>> Gluster-devel@gluster.org >>> https://lists.gluster.org/mailman/listinfo/gluster-devel >>> >>> ___ Community Meeting Calendar: APAC Schedule - Every 2nd and 4th Tuesday at 11:30 AM IST Bridge: https://bluejeans.com/836554017 NA/EMEA Schedule - Every 1st and 3rd Tuesday at 01:00 PM EDT Bridge: https://bluejeans.com/486278655 Gluster-devel mailing list Gluster-devel@gluster.org https://lists.gluster.org/mailman/listinfo/gluster-devel
Re: [Gluster-devel] Gluster on RHEL 8
Greeting Kaleb, Thank you for the clarification. Though, I did try to install rpcgen package, but without success (libtirpc-devel package is installed). I'm attaching relevant terminal output. What am I missing? Barak On Tue, Jul 23, 2019 at 2:25 PM Kaleb Keithley wrote: > > you must not use --without-libtirpc on RHEL8. > > rpcgen is in the rpcgen package on RHEL8 and Fedora 29+ > > -- > > Kaleb > > > On Tue, Jul 23, 2019 at 7:11 AM Barak Sason wrote: > >> Greeting all, >> >> I've made a fresh installation of RHEL 8 on a VM and have been trying to >> set up Gluster on that system. >> >> Running ./autogen.sh completes OK, but running ./config results in an >> error regarding missing 'rpcgen'. >> 'libtirpc-devel package is installed. >> Running ./configure --without-libtirp results in the same error. >> I'm attaching reverent terminal output. >> I'm currently out of ideas. >> >> I appreciate any help you may offer, >> >> Barak >> ___ >> >> Community Meeting Calendar: >> >> APAC Schedule - >> Every 2nd and 4th Tuesday at 11:30 AM IST >> Bridge: https://bluejeans.com/836554017 >> >> NA/EMEA Schedule - >> Every 1st and 3rd Tuesday at 01:00 PM EDT >> Bridge: https://bluejeans.com/486278655 >> >> Gluster-devel mailing list >> Gluster-devel@gluster.org >> https://lists.gluster.org/mailman/listinfo/gluster-devel >> >> [root@localhost ~]# dnf install rpcgen Updating Subscription Management repositories. Last metadata expiration check: 1:50:52 ago on Mon 22 Jul 2019 04:21:58 PM IDT. No match for argument: rpcgen Error: Unable to find a match [root@localhost ~]# yum install rpcgen Updating Subscription Management repositories. Last metadata expiration check: 1:51:00 ago on Mon 22 Jul 2019 04:21:58 PM IDT. No match for argument: rpcgen Error: Unable to find a match [root@localhost ~]# ___ Community Meeting Calendar: APAC Schedule - Every 2nd and 4th Tuesday at 11:30 AM IST Bridge: https://bluejeans.com/836554017 NA/EMEA Schedule - Every 1st and 3rd Tuesday at 01:00 PM EDT Bridge: https://bluejeans.com/486278655 Gluster-devel mailing list Gluster-devel@gluster.org https://lists.gluster.org/mailman/listinfo/gluster-devel
Re: [Gluster-devel] Gluster on RHEL 8
you must not use --without-libtirpc on RHEL8. rpcgen is in the rpcgen package on RHEL8 and Fedora 29+ -- Kaleb On Tue, Jul 23, 2019 at 7:11 AM Barak Sason wrote: > Greeting all, > > I've made a fresh installation of RHEL 8 on a VM and have been trying to > set up Gluster on that system. > > Running ./autogen.sh completes OK, but running ./config results in an > error regarding missing 'rpcgen'. > 'libtirpc-devel package is installed. > Running ./configure --without-libtirp results in the same error. > I'm attaching reverent terminal output. > I'm currently out of ideas. > > I appreciate any help you may offer, > > Barak > ___ > > Community Meeting Calendar: > > APAC Schedule - > Every 2nd and 4th Tuesday at 11:30 AM IST > Bridge: https://bluejeans.com/836554017 > > NA/EMEA Schedule - > Every 1st and 3rd Tuesday at 01:00 PM EDT > Bridge: https://bluejeans.com/486278655 > > Gluster-devel mailing list > Gluster-devel@gluster.org > https://lists.gluster.org/mailman/listinfo/gluster-devel > > ___ Community Meeting Calendar: APAC Schedule - Every 2nd and 4th Tuesday at 11:30 AM IST Bridge: https://bluejeans.com/836554017 NA/EMEA Schedule - Every 1st and 3rd Tuesday at 01:00 PM EDT Bridge: https://bluejeans.com/486278655 Gluster-devel mailing list Gluster-devel@gluster.org https://lists.gluster.org/mailman/listinfo/gluster-devel
Re: [Gluster-devel] Gluster on RHEL 8
Hello Prasanna *,*Thank you for the quick response. I've made a mistake and attached the wring output file (I've noticed the spelling error as you've pointed out, and copied output to a new file, but attached the old by mistake). Attached now is the relevant file. I apologize for the inconvenience, Barak On Tue, Jul 23, 2019 at 2:14 PM Prasanna Kalever wrote: > On Tue, Jul 23, 2019 at 4:41 PM Barak Sason wrote: > > > > Greeting all, > > > > I've made a fresh installation of RHEL 8 on a VM and have been trying to > set up Gluster on that system. > > > > Running ./autogen.sh completes OK, but running ./config results in an > error regarding missing 'rpcgen'. > > 'libtirpc-devel package is installed. > > Running ./configure --without-libtirp results in the same error. > > I see: > [root@localhost src]# ./configure --without-libtirp > configure: WARNING: unrecognized options: --without-libtirp > > should it be '--without-libtirpc' instead of '--without-libtirp' ? > > BRs, > -- > Prasanna > > > > > > > I'm attaching reverent terminal output. > > I'm currently out of ideas. > > > > I appreciate any help you may offer, > > > > Barak > > ___ > > > > Community Meeting Calendar: > > > > APAC Schedule - > > Every 2nd and 4th Tuesday at 11:30 AM IST > > Bridge: https://bluejeans.com/836554017 > > > > NA/EMEA Schedule - > > Every 1st and 3rd Tuesday at 01:00 PM EDT > > Bridge: https://bluejeans.com/486278655 > > > > Gluster-devel mailing list > > Gluster-devel@gluster.org > > https://lists.gluster.org/mailman/listinfo/gluster-devel > > > [root@localhost src]# ./configure --without-libtirpc checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /usr/bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking how to create a pax tar archive... gnutar checking whether make supports nested variables... (cached) yes checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking whether make supports the include directive... yes (GNU style) checking dependency style of gcc... gcc3 checking how to print strings... printf checking for a sed that does not truncate output... /usr/bin/sed checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for fgrep... /usr/bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /usr/bin/dd checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... no checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking
Re: [Gluster-devel] Gluster on RHEL 8
On Tue, Jul 23, 2019 at 4:41 PM Barak Sason wrote: > > Greeting all, > > I've made a fresh installation of RHEL 8 on a VM and have been trying to set > up Gluster on that system. > > Running ./autogen.sh completes OK, but running ./config results in an error > regarding missing 'rpcgen'. > 'libtirpc-devel package is installed. > Running ./configure --without-libtirp results in the same error. I see: [root@localhost src]# ./configure --without-libtirp configure: WARNING: unrecognized options: --without-libtirp should it be '--without-libtirpc' instead of '--without-libtirp' ? BRs, -- Prasanna > I'm attaching reverent terminal output. > I'm currently out of ideas. > > I appreciate any help you may offer, > > Barak > ___ > > Community Meeting Calendar: > > APAC Schedule - > Every 2nd and 4th Tuesday at 11:30 AM IST > Bridge: https://bluejeans.com/836554017 > > NA/EMEA Schedule - > Every 1st and 3rd Tuesday at 01:00 PM EDT > Bridge: https://bluejeans.com/486278655 > > Gluster-devel mailing list > Gluster-devel@gluster.org > https://lists.gluster.org/mailman/listinfo/gluster-devel > ___ Community Meeting Calendar: APAC Schedule - Every 2nd and 4th Tuesday at 11:30 AM IST Bridge: https://bluejeans.com/836554017 NA/EMEA Schedule - Every 1st and 3rd Tuesday at 01:00 PM EDT Bridge: https://bluejeans.com/486278655 Gluster-devel mailing list Gluster-devel@gluster.org https://lists.gluster.org/mailman/listinfo/gluster-devel