Re: [GRASS-user] Another error with wxpython GUI in RC6 - repeatable
Hi Martin, Glynn everybody, To repeat the problem consistently: -there is an error if there is no directory called PERMANENT in a directory below the directory where grass63 -wxpython is run -creating a directory anything/PERMANENT prevents the problem i.e. run grass63 -wxpython in $HOME starts OK when directory $HOME/anything/PERMANENT exists Cheers, Peter geep999 wrote: Hi Martin, Glynn everybody, Problem solved (accidentally!) - not totally sure how. And found a new (to me!) dependency - NumPy. 1/ When I started grass63 -wxpython the first few times I was in my home directory. When I got the nasty error messages initially reported I did not have any GIS Data. Later I copied a GIS Data Directory from another PC into $HOME/MountDoom Then: cd $HOME/MountDoom grass63 -wxpython (whilst in $HOME/MountDoom) No more nasty error messages, instead I got this: [EMAIL PROTECTED]:~/MountDoom$ grass63 -wxpython Cleaning up temporary files. Starting GRASS ... GRASS GUI should be wxpython __ ___ _____ / / __ \/ | / ___/ ___/ / / _/ ___/ / / __/ /_/ / /| | \__ \\_ \ / / __ / / \__ \ / /_/ / _, _/ ___ |___/ /__/ / / /_/ // / ___/ / \/_/ |_/_/ |_/// \/___/// Welcome to GRASS 6.3.0svn (2008) GRASS homepage: http://grass.osgeo.org/ This version running thru: Bash Shell (/bin/bash) Help is available with the command: g.manual -i See the licence terms with: g.version -c If required, restart the GUI with: g.gui wxpython When ready to quit enter:exit GRASS 6.3.0svn (MountDoom):~/MountDoom profile.py: This module requires the NumPy module, which could not be imported. It probably is not installed (it's not part of the standard Python distribution). See the Numeric Python site (http://numpy.scipy.org) for information on downloading source or binaries. GRASS 6.3.0svn (MountDoom):~/MountDoom 2/ So, I installed this new dependency ;) NumPy. Lo and behold, without so much as a ./configure or make, I find that grass63 -wxpython is running with a shiny new interface. 3/ It seems that launching from within $HOME/MountDoom was somehow the trick that got me started, and stopped the nasty error messages. I note that -wxpython and -tcltk show different Project Locations when launched from my $HOME directory. -tcltk lists all directories in $HOME in the Project Location box -wxpython only lists directory MountDoom in the Project Location box Cheers, Peter Martin Landa-2 wrote: Hi, 1/ I tried compiling using --with-python=no --with-wxwidgets But with svn revision 30941 I get: Errors in: /home/dad/grass63_release_build/grass63_release/gui/wxpython/vdigit -- In case of errors please change into the directory with error and run 'make'. now should be fixed in trunk and releasebranch_63, see http://trac.osgeo.org/grass/changeset/30951 when you run svn up ./configure ... --with-python=no ... vdigit will be not compiled, i.e. it requires both --with-python and --with-wxwidgets. So it seems that to have the wxPython gui I need to have swig installed. No, swig is need only for compilation of vector digitizer, wxGUI (without digitizer) is installed regardless of any configuration switch. Martin -- Martin Landa landa.martin gmail.com * http://gama.fsv.cvut.cz/~landa * ___ grass-user mailing list grass-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/grass-user -- View this message in context: http://www.nabble.com/Another-error-with-wxpython-GUI-in-RC6-tp16627913p16656755.html Sent from the Grass - Users mailing list archive at Nabble.com. ___ grass-user mailing list grass-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/grass-user
Re: [GRASS-user] Another error with wxpython GUI in RC6 - repeatable
Hi, 2008/4/13, geep999 [EMAIL PROTECTED]: -there is an error if there is no directory called PERMANENT in a directory below the directory where grass63 -wxpython is run strange I cannot reproduce this error (python 2.4.5, wxpython 2.8.7.1) rm -r /home/martin/.grassrc6 ls [nothing] grass630 -wxpython [gui starts - list of locations/mapsets empty] The patch I sent you didn't help? BTW, can you install also grass_trunk and check if the same error appears? Martin geep999 wrote: Hi Martin, Glynn everybody, Problem solved (accidentally!) - not totally sure how. And found a new (to me!) dependency - NumPy. 1/ When I started grass63 -wxpython the first few times I was in my home directory. When I got the nasty error messages initially reported I did not have any GIS Data. Later I copied a GIS Data Directory from another PC into $HOME/MountDoom Then: cd $HOME/MountDoom grass63 -wxpython (whilst in $HOME/MountDoom) No more nasty error messages, instead I got this: [EMAIL PROTECTED]:~/MountDoom$ grass63 -wxpython Cleaning up temporary files. Starting GRASS ... GRASS GUI should be wxpython __ ___ _____ / / __ \/ | / ___/ ___/ / / _/ ___/ / / __/ /_/ / /| | \__ \\_ \ / / __ / / \__ \ / /_/ / _, _/ ___ |___/ /__/ / / /_/ // / ___/ / \/_/ |_/_/ |_/// \/___/// Welcome to GRASS 6.3.0svn (2008) GRASS homepage: http://grass.osgeo.org/ This version running thru: Bash Shell (/bin/bash) Help is available with the command: g.manual -i See the licence terms with: g.version -c If required, restart the GUI with: g.gui wxpython When ready to quit enter:exit GRASS 6.3.0svn (MountDoom):~/MountDoom profile.py: This module requires the NumPy module, which could not be imported. It probably is not installed (it's not part of the standard Python distribution). See the Numeric Python site (http://numpy.scipy.org) for information on downloading source or binaries. GRASS 6.3.0svn (MountDoom):~/MountDoom 2/ So, I installed this new dependency ;) NumPy. Lo and behold, without so much as a ./configure or make, I find that grass63 -wxpython is running with a shiny new interface. 3/ It seems that launching from within $HOME/MountDoom was somehow the trick that got me started, and stopped the nasty error messages. I note that -wxpython and -tcltk show different Project Locations when launched from my $HOME directory. -tcltk lists all directories in $HOME in the Project Location box -wxpython only lists directory MountDoom in the Project Location box Cheers, Peter Martin Landa-2 wrote: Hi, 1/ I tried compiling using --with-python=no --with-wxwidgets But with svn revision 30941 I get: Errors in: /home/dad/grass63_release_build/grass63_release/gui/wxpython/vdigit -- In case of errors please change into the directory with error and run 'make'. now should be fixed in trunk and releasebranch_63, see http://trac.osgeo.org/grass/changeset/30951 when you run svn up ./configure ... --with-python=no ... vdigit will be not compiled, i.e. it requires both --with-python and --with-wxwidgets. So it seems that to have the wxPython gui I need to have swig installed. No, swig is need only for compilation of vector digitizer, wxGUI (without digitizer) is installed regardless of any configuration switch. Martin -- Martin Landa landa.martin gmail.com * http://gama.fsv.cvut.cz/~landa * ___ grass-user mailing list grass-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/grass-user -- View this message in context: http://www.nabble.com/Another-error-with-wxpython-GUI-in-RC6-tp16627913p16656755.html Sent from the Grass - Users mailing list archive at Nabble.com. ___ grass-user mailing list grass-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/grass-user -- Martin Landa landa.martin gmail.com * http://gama.fsv.cvut.cz/~landa * ___ grass-user mailing list grass-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/grass-user
Re: [GRASS-user] Another error with wxpython GUI in RC6 - repeatable
Hi, I committed this patch to releasebranch_63 http://trac.osgeo.org/grass/changeset/30967 Are you getting the same error now? Martin 2008/4/13, Martin Landa [EMAIL PROTECTED]: Hi, 2008/4/13, geep999 [EMAIL PROTECTED]: -there is an error if there is no directory called PERMANENT in a directory below the directory where grass63 -wxpython is run strange I cannot reproduce this error (python 2.4.5, wxpython 2.8.7.1) rm -r /home/martin/.grassrc6 ls [nothing] grass630 -wxpython [gui starts - list of locations/mapsets empty] The patch I sent you didn't help? BTW, can you install also grass_trunk and check if the same error appears? Martin geep999 wrote: Hi Martin, Glynn everybody, Problem solved (accidentally!) - not totally sure how. And found a new (to me!) dependency - NumPy. 1/ When I started grass63 -wxpython the first few times I was in my home directory. When I got the nasty error messages initially reported I did not have any GIS Data. Later I copied a GIS Data Directory from another PC into $HOME/MountDoom Then: cd $HOME/MountDoom grass63 -wxpython (whilst in $HOME/MountDoom) No more nasty error messages, instead I got this: [EMAIL PROTECTED]:~/MountDoom$ grass63 -wxpython Cleaning up temporary files. Starting GRASS ... GRASS GUI should be wxpython __ ___ _____ / / __ \/ | / ___/ ___/ / / _/ ___/ / / __/ /_/ / /| | \__ \\_ \ / / __ / / \__ \ / /_/ / _, _/ ___ |___/ /__/ / / /_/ // / ___/ / \/_/ |_/_/ |_/// \/___/// Welcome to GRASS 6.3.0svn (2008) GRASS homepage: http://grass.osgeo.org/ This version running thru: Bash Shell (/bin/bash) Help is available with the command: g.manual -i See the licence terms with: g.version -c If required, restart the GUI with: g.gui wxpython When ready to quit enter:exit GRASS 6.3.0svn (MountDoom):~/MountDoom profile.py: This module requires the NumPy module, which could not be imported. It probably is not installed (it's not part of the standard Python distribution). See the Numeric Python site (http://numpy.scipy.org) for information on downloading source or binaries. GRASS 6.3.0svn (MountDoom):~/MountDoom 2/ So, I installed this new dependency ;) NumPy. Lo and behold, without so much as a ./configure or make, I find that grass63 -wxpython is running with a shiny new interface. 3/ It seems that launching from within $HOME/MountDoom was somehow the trick that got me started, and stopped the nasty error messages. I note that -wxpython and -tcltk show different Project Locations when launched from my $HOME directory. -tcltk lists all directories in $HOME in the Project Location box -wxpython only lists directory MountDoom in the Project Location box Cheers, Peter Martin Landa-2 wrote: Hi, 1/ I tried compiling using --with-python=no --with-wxwidgets But with svn revision 30941 I get: Errors in: /home/dad/grass63_release_build/grass63_release/gui/wxpython/vdigit -- In case of errors please change into the directory with error and run 'make'. now should be fixed in trunk and releasebranch_63, see http://trac.osgeo.org/grass/changeset/30951 when you run svn up ./configure ... --with-python=no ... vdigit will be not compiled, i.e. it requires both --with-python and --with-wxwidgets. So it seems that to have the wxPython gui I need to have swig installed. No, swig is need only for compilation of vector digitizer, wxGUI (without digitizer) is installed regardless of any configuration switch. Martin -- Martin Landa landa.martin gmail.com * http://gama.fsv.cvut.cz/~landa * ___ grass-user mailing list grass-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/grass-user -- View this message in context: http://www.nabble.com/Another-error-with-wxpython-GUI-in-RC6-tp16627913p16656755.html Sent from the Grass - Users mailing list archive at Nabble.com. ___ grass-user mailing list grass-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/grass-user -- Martin Landa landa.martin gmail.com * http://gama.fsv.cvut.cz/~landa * -- Martin Landa landa.martin gmail.com * http://gama.fsv.cvut.cz/~landa * ___
Re: [GRASS-user] Another error with wxpython GUI in RC6 - repeatable
Hi Martin, I tried the patch, applying it to revision 30961, - problem solved. I downloaded svn_trunk (revision 30966) - problem solved. Cheers, Peter Martin Landa [EMAIL PROTECTED] wrote: Hi, I committed this patch to releasebranch_63 http://trac.osgeo.org/grass/changeset/30967 Are you getting the same error now? Martin 2008/4/13, Martin Landa : Hi, 2008/4/13, geep999 : -there is an error if there is no directory called PERMANENT in a directory below the directory where grass63 -wxpython is run strange I cannot reproduce this error (python 2.4.5, wxpython 2.8.7.1) rm -r /home/martin/.grassrc6 ls [nothing] grass630 -wxpython [gui starts - list of locations/mapsets empty] The patch I sent you didn't help? BTW, can you install also grass_trunk and check if the same error appears? Martin geep999 wrote: Hi Martin, Glynn everybody, Problem solved (accidentally!) - not totally sure how. And found a new (to me!) dependency - NumPy. 1/ When I started grass63 -wxpython the first few times I was in my home directory. When I got the nasty error messages initially reported I did not have any GIS Data. Later I copied a GIS Data Directory from another PC into $HOME/MountDoom Then: cd $HOME/MountDoom grass63 -wxpython (whilst in $HOME/MountDoom) No more nasty error messages, instead I got this: [EMAIL PROTECTED]:~/MountDoom$ grass63 -wxpython Cleaning up temporary files. Starting GRASS ... GRASS GUI should be wxpython __ ___ _____ / / __ \/ | / ___/ ___/ / / _/ ___/ / / __/ /_/ / /| | \__ \\_ \ / / __ / / \__ \ / /_/ / _, _/ ___ |___/ /__/ / / /_/ // / ___/ / \/_/ |_/_/ |_/// \/___/// Welcome to GRASS 6.3.0svn (2008) GRASS homepage: http://grass.osgeo.org/ This version running thru: Bash Shell (/bin/bash) Help is available with the command: g.manual -i See the licence terms with: g.version -c If required, restart the GUI with: g.gui wxpython When ready to quit enter:exit GRASS 6.3.0svn (MountDoom):~/MountDoom profile.py: This module requires the NumPy module, which could not be imported. It probably is not installed (it's not part of the standard Python distribution). See the Numeric Python site (http://numpy.scipy.org) for information on downloading source or binaries. GRASS 6.3.0svn (MountDoom):~/MountDoom 2/ So, I installed this new dependency ;) NumPy. Lo and behold, without so much as a ./configure or make, I find that grass63 -wxpython is running with a shiny new interface. 3/ It seems that launching from within $HOME/MountDoom was somehow the trick that got me started, and stopped the nasty error messages. I note that -wxpython and -tcltk show different Project Locations when launched from my $HOME directory. -tcltk lists all directories in $HOME in the Project Location box -wxpython only lists directory MountDoom in the Project Location box Cheers, Peter Martin Landa-2 wrote: Hi, 1/ I tried compiling using --with-python=no --with-wxwidgets But with svn revision 30941 I get: Errors in: /home/dad/grass63_release_build/grass63_release/gui/wxpython/vdigit -- In case of errors please change into the directory with error and run 'make'. now should be fixed in trunk and releasebranch_63, see http://trac.osgeo.org/grass/changeset/30951 when you run svn up ./configure ... --with-python=no ... vdigit will be not compiled, i.e. it requires both --with-python and --with-wxwidgets. So it seems that to have the wxPython gui I need to have swig installed. No, swig is need only for compilation of vector digitizer, wxGUI (without digitizer) is installed regardless of any configuration switch. Martin -- Martin Landa * http://gama.fsv.cvut.cz/~landa * ___ grass-user mailing list grass-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/grass-user -- View this message in context: http://www.nabble.com/Another-error-with-wxpython-GUI-in-RC6-tp16627913p16656755.html Sent from the Grass - Users mailing list archive at Nabble.com. ___ grass-user mailing list grass-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/grass-user -- Martin Landa * http://gama.fsv.cvut.cz/~landa * -- Martin
Re: [GRASS-user] Another error with wxpython GUI in RC6 - repeatable
Hi, OK now with releasebranch_6_3 grass63_release 30968. Cheers, Peter Martin Landa [EMAIL PROTECTED] wrote: Hi, I committed this patch to releasebranch_63 http://trac.osgeo.org/grass/changeset/30967 Are you getting the same error now? Martin 2008/4/13, Martin Landa : Hi, 2008/4/13, geep999 : -there is an error if there is no directory called PERMANENT in a directory below the directory where grass63 -wxpython is run strange I cannot reproduce this error (python 2.4.5, wxpython 2.8.7.1) rm -r /home/martin/.grassrc6 ls [nothing] grass630 -wxpython [gui starts - list of locations/mapsets empty] The patch I sent you didn't help? BTW, can you install also grass_trunk and check if the same error appears? Martin geep999 wrote: Hi Martin, Glynn everybody, Problem solved (accidentally!) - not totally sure how. And found a new (to me!) dependency - NumPy. 1/ When I started grass63 -wxpython the first few times I was in my home directory. When I got the nasty error messages initially reported I did not have any GIS Data. Later I copied a GIS Data Directory from another PC into $HOME/MountDoom Then: cd $HOME/MountDoom grass63 -wxpython (whilst in $HOME/MountDoom) No more nasty error messages, instead I got this: [EMAIL PROTECTED]:~/MountDoom$ grass63 -wxpython Cleaning up temporary files. Starting GRASS ... GRASS GUI should be wxpython __ ___ _____ / / __ \/ | / ___/ ___/ / / _/ ___/ / / __/ /_/ / /| | \__ \\_ \ / / __ / / \__ \ / /_/ / _, _/ ___ |___/ /__/ / / /_/ // / ___/ / \/_/ |_/_/ |_/// \/___/// Welcome to GRASS 6.3.0svn (2008) GRASS homepage: http://grass.osgeo.org/ This version running thru: Bash Shell (/bin/bash) Help is available with the command: g.manual -i See the licence terms with: g.version -c If required, restart the GUI with: g.gui wxpython When ready to quit enter:exit GRASS 6.3.0svn (MountDoom):~/MountDoom profile.py: This module requires the NumPy module, which could not be imported. It probably is not installed (it's not part of the standard Python distribution). See the Numeric Python site (http://numpy.scipy.org) for information on downloading source or binaries. GRASS 6.3.0svn (MountDoom):~/MountDoom 2/ So, I installed this new dependency ;) NumPy. Lo and behold, without so much as a ./configure or make, I find that grass63 -wxpython is running with a shiny new interface. 3/ It seems that launching from within $HOME/MountDoom was somehow the trick that got me started, and stopped the nasty error messages. I note that -wxpython and -tcltk show different Project Locations when launched from my $HOME directory. -tcltk lists all directories in $HOME in the Project Location box -wxpython only lists directory MountDoom in the Project Location box Cheers, Peter Martin Landa-2 wrote: Hi, 1/ I tried compiling using --with-python=no --with-wxwidgets But with svn revision 30941 I get: Errors in: /home/dad/grass63_release_build/grass63_release/gui/wxpython/vdigit -- In case of errors please change into the directory with error and run 'make'. now should be fixed in trunk and releasebranch_63, see http://trac.osgeo.org/grass/changeset/30951 when you run svn up ./configure ... --with-python=no ... vdigit will be not compiled, i.e. it requires both --with-python and --with-wxwidgets. So it seems that to have the wxPython gui I need to have swig installed. No, swig is need only for compilation of vector digitizer, wxGUI (without digitizer) is installed regardless of any configuration switch. Martin -- Martin Landa * http://gama.fsv.cvut.cz/~landa * ___ grass-user mailing list grass-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/grass-user -- View this message in context: http://www.nabble.com/Another-error-with-wxpython-GUI-in-RC6-tp16627913p16656755.html Sent from the Grass - Users mailing list archive at Nabble.com. ___ grass-user mailing list grass-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/grass-user -- Martin Landa * http://gama.fsv.cvut.cz/~landa * -- Martin Landa * http://gama.fsv.cvut.cz/~landa *
