[Group.of.nepali.translators] [Bug 1753439] Re: Redpine: BLE scanning for nearby beacons per second is too low and result high loss rate.

2018-05-15 Thread Launchpad Bug Tracker 
This bug was fixed in the package linux-firmware - 1.157.18

---
linux-firmware (1.157.18) xenial; urgency=medium

  * Redpine: BLE scanning for nearby beacons per second is too low and result
high loss rate (LP: #1753439)
- UBUNTU: linux-firmware: update firmware images for Redpine 9113 chipset

  * Redpine: BLE radio lost issue (LP: #1757443)
- UBUNTU: linux-firmware: update firmware images for Redpine 9113 chipset

  * Update firmware for 18.04 hwe kernel (LP: #1763823)
- linux-firmware: liquidio: update firmware to v1.4.2
- linux-firmware: liquidio: update firmware to v1.5.1
- linux-firmware: liquidio: update firmware to v1.6.0
- firmware: tegra: Add VIC firmware
- linux-firmware: liquidio: update firmware to v1.6.1
- rtlwifi: rtl8822be: Add firmware for new driver/device
- linux-firmware/i915: Add Geminilake DMC version 1.04
- iwlwifi: add new firmware version 34 for 8000C and 8265
- linux-firmware: liquidio: update firmware to v1.7.0
- iwlwifi: add firmware version 34 for new 9000 series
- amdgpu: add new CP firmware for polaris chips
- Mellanox: Add new mlxsw_spectrum firmware 13.1530.152
- brcm: introduce firmware for bcm43430 revision 0
- amdgpu: add firmware for Raven
- brcm: add CYW4373 firmwares and Cypress license file
- amdgpu: update vcn firmware for raven
- Revert "UBUNTU: Remove obsolete bnx2 firmware"
- Revert "UBUNTU: Remove duplicate bnx2 firmware"
- Revert "UBUNTU: Remove obsolete bnx2 firmware"
- Revert "UBUNTU: Remove obsolete bnx2 firmware"
- UBUNTU: update nic-firmware.lst for 18.04 hwe kernel

  * Update Qualcomm QCA6174-HMC (DW1820) to comply with CE-RED (Radio
Emissions Directive) (LP: #1752044)
- ath10k: QCA6174 hw3.0: update firmware-6.bin to 
WLAN.RM.4.4.1-00079-QCARMSWPZ-1
- ath10k: QCA6174 hw3.0: update board-2.bin

 -- Seth Forshee   Tue, 24 Apr 2018 10:58:13
-0500

** Changed in: linux-firmware (Ubuntu Xenial)
   Status: Fix Committed => Fix Released

-- 
You received this bug notification because you are a member of नेपाली
भाषा समायोजकहरुको समूह, which is subscribed to Xenial.
Matching subscriptions: Ubuntu 16.04 Bugs
https://bugs.launchpad.net/bugs/1753439

Title:
  Redpine: BLE scanning for nearby beacons per second is too low and
  result high loss rate.

Status in linux package in Ubuntu:
  Confirmed
Status in linux-firmware package in Ubuntu:
  Invalid
Status in linux source package in Xenial:
  Fix Released
Status in linux-firmware source package in Xenial:
  Fix Released
Status in linux source package in Bionic:
  Confirmed
Status in linux-firmware source package in Bionic:
  Invalid

Bug description:
  SRU Justification

  Impact: BLE scanning for nearby beacons per second is too low and
  result high loss rate.

  Fix: Updated firmware.

  Test Case: Test on affected hardware using instructions below.

  Regression Potential: Limited to specific hardware.

  ---

  Steps to replicate the issue:

  1. Power on the BT device, then change the terminal by "Ctil+F1" or open 
another putty to ssh SUT.
  2.Use command below to discover BLE device.
  $ sudo stdbuf -i0-o0 -e0 /snap/bluez/current/usr/bin/hcitool lescan 
--duplicates --passive | perl -nle 'print scalar(localtime), " ",$_'
  3. log as attachment.

  This bug is for tracking purposes only, do not triage.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1753439/+subscriptions

___
Mailing list: https://launchpad.net/~group.of.nepali.translators
Post to : group.of.nepali.translators@lists.launchpad.net
Unsubscribe : https://launchpad.net/~group.of.nepali.translators
More help   : https://help.launchpad.net/ListHelp

[Group.of.nepali.translators] [Bug 1753439] Re: Redpine: BLE scanning for nearby beacons per second is too low and result high loss rate.

2018-04-04 Thread Launchpad Bug Tracker 
This bug was fixed in the package linux - 4.4.0-119.143

---
linux (4.4.0-119.143) xenial; urgency=medium

  * linux: 4.4.0-119.143 -proposed tracker (LP: #1760327)

  * Dell XPS 13 9360 bluetooth scan can not detect any device (LP: #1759821)
- Revert "Bluetooth: btusb: fix QCA Rome suspend/resume"

linux (4.4.0-118.142) xenial; urgency=medium

  * linux: 4.4.0-118.142 -proposed tracker (LP: #1759607)

  * Kernel panic with AWS 4.4.0-1053 / 4.4.0-1015 (Trusty) (LP: #1758869)
- x86/microcode/AMD: Do not load when running on a hypervisor

  * CVE-2018-8043
- net: phy: mdio-bcm-unimac: fix potential NULL dereference in
  unimac_mdio_probe()

linux (4.4.0-117.141) xenial; urgency=medium

  * linux: 4.4.0-117.141 -proposed tracker (LP: #1755208)

  * Xenial update to 4.4.114 stable release (LP: #1754592)
- x86/asm/32: Make sync_core() handle missing CPUID on all 32-bit kernels
- usbip: prevent vhci_hcd driver from leaking a socket pointer address
- usbip: Fix implicit fallthrough warning
- usbip: Fix potential format overflow in userspace tools
- x86/microcode/intel: Fix BDW late-loading revision check
- x86/retpoline: Fill RSB on context switch for affected CPUs
- sched/deadline: Use the revised wakeup rule for suspending constrained dl
  tasks
- can: af_can: can_rcv(): replace WARN_ONCE by pr_warn_once
- can: af_can: canfd_rcv(): replace WARN_ONCE by pr_warn_once
- PM / sleep: declare __tracedata symbols as char[] rather than char
- time: Avoid undefined behaviour in ktime_add_safe()
- timers: Plug locking race vs. timer migration
- Prevent timer value 0 for MWAITX
- drivers: base: cacheinfo: fix x86 with CONFIG_OF enabled
- drivers: base: cacheinfo: fix boot error message when acpi is enabled
- PCI: layerscape: Add "fsl,ls2085a-pcie" compatible ID
- PCI: layerscape: Fix MSG TLP drop setting
- mmc: sdhci-of-esdhc: add/remove some quirks according to vendor version
- fs/select: add vmalloc fallback for select(2)
- hwpoison, memcg: forcibly uncharge LRU pages
- cma: fix calculation of aligned offset
- mm, page_alloc: fix potential false positive in __zone_watermark_ok
- ipc: msg, make msgrcv work with LONG_MIN
- x86/ioapic: Fix incorrect pointers in ioapic_setup_resources()
- ACPI / processor: Avoid reserving IO regions too early
- ACPI / scan: Prefer devices without _HID/_CID for _ADR matching
- ACPICA: Namespace: fix operand cache leak
- netfilter: x_tables: speed up jump target validation
- netfilter: arp_tables: fix invoking 32bit "iptable -P INPUT ACCEPT" failed
  in 64bit kernel
- netfilter: nf_dup_ipv6: set again FLOWI_FLAG_KNOWN_NH at flowi6_flags
- netfilter: nf_ct_expect: remove the redundant slash when policy name is
  empty
- netfilter: nfnetlink_queue: reject verdict request from different portid
- netfilter: restart search if moved to other chain
- netfilter: nf_conntrack_sip: extend request line validation
- netfilter: use fwmark_reflect in nf_send_reset
- ext2: Don't clear SGID when inheriting ACLs
- reiserfs: fix race in prealloc discard
- reiserfs: don't preallocate blocks for extended attributes
- reiserfs: Don't clear SGID when inheriting ACLs
- fs/fcntl: f_setown, avoid undefined behaviour
- scsi: libiscsi: fix shifting of DID_REQUEUE host byte
- Input: trackpoint - force 3 buttons if 0 button is reported
- usb: usbip: Fix possible deadlocks reported by lockdep
- usbip: fix stub_rx: get_pipe() to validate endpoint number
- usbip: fix stub_rx: harden CMD_SUBMIT path to handle malicious input
- usbip: prevent leaking socket pointer address in messages
- um: link vmlinux with -no-pie
- vsyscall: Fix permissions for emulate mode with KAISER/PTI
- eventpoll.h: add missing epoll event masks
- x86/microcode/intel: Extend BDW late-loading further with LLC size check
- hrtimer: Reset hrtimer cpu base proper on CPU hotplug
- dccp: don't restart ccid2_hc_tx_rto_expire() if sk in closed state
- ipv6: Fix getsockopt() for sockets with default IPV6_AUTOFLOWLABEL
- ipv6: fix udpv6 sendmsg crash caused by too small MTU
- ipv6: ip6_make_skb() needs to clear cork.base.dst
- lan78xx: Fix failure in USB Full Speed
- net: igmp: fix source address check for IGMPv3 reports
- tcp: __tcp_hdrlen() helper
- net: qdisc_pkt_len_init() should be more robust
- pppoe: take ->needed_headroom of lower device into account on xmit
- r8169: fix memory corruption on retrieval of hardware statistics.
- sctp: do not allow the v4 socket to bind a v4mapped v6 address
- sctp: return error if the asoc has been peeled off in sctp_wait_for_sndbuf
- vmxnet3: repair memory leak
- net: Allow neigh contructor functions ability to modify the primary_key
- ipv4: Make neigh lookup keys for loopback/point-to-point devices be
  INADDR_ANY

[Group.of.nepali.translators] [Bug 1753439] Re: Redpine: BLE scanning for nearby beacons per second is too low and result high loss rate.

2018-03-19 Thread Seth Forshee 
** Also affects: linux (Ubuntu Bionic)
   Importance: Medium
   Status: Confirmed

** Also affects: linux-firmware (Ubuntu Bionic)
   Importance: Undecided
   Status: Invalid

-- 
You received this bug notification because you are a member of नेपाली
भाषा समायोजकहरुको समूह, which is subscribed to Xenial.
Matching subscriptions: Ubuntu 16.04 Bugs
https://bugs.launchpad.net/bugs/1753439

Title:
  Redpine: BLE scanning for nearby beacons per second is too low and
  result high loss rate.

Status in linux package in Ubuntu:
  Confirmed
Status in linux-firmware package in Ubuntu:
  Invalid
Status in linux source package in Xenial:
  Fix Committed
Status in linux-firmware source package in Xenial:
  Fix Committed
Status in linux source package in Bionic:
  Confirmed
Status in linux-firmware source package in Bionic:
  Invalid

Bug description:
  Steps to replicate the issue:

  1. Power on the BT device, then change the terminal by "Ctil+F1" or open 
another putty to ssh SUT.
  2.Use command below to discover BLE device.
  $ sudo stdbuf -i0-o0 -e0 /snap/bluez/current/usr/bin/hcitool lescan 
--duplicates --passive | perl -nle 'print scalar(localtime), " ",$_'
  3. log as attachment.

  This bug is for tracking purposes only, do not triage.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1753439/+subscriptions

___
Mailing list: https://launchpad.net/~group.of.nepali.translators
Post to : group.of.nepali.translators@lists.launchpad.net
Unsubscribe : https://launchpad.net/~group.of.nepali.translators
More help   : https://help.launchpad.net/ListHelp

[Group.of.nepali.translators] [Bug 1753439] Re: Redpine: BLE scanning for nearby beacons per second is too low and result high loss rate.

2018-03-15 Thread Seth Forshee 
** Also affects: linux-firmware (Ubuntu)
   Importance: Undecided
   Status: New

** Changed in: linux-firmware (Ubuntu)
   Status: New => Invalid

** Changed in: linux-firmware (Ubuntu Xenial)
   Status: New => Fix Committed

-- 
You received this bug notification because you are a member of नेपाली
भाषा समायोजकहरुको समूह, which is subscribed to Xenial.
Matching subscriptions: Ubuntu 16.04 Bugs
https://bugs.launchpad.net/bugs/1753439

Title:
  Redpine: BLE scanning for nearby beacons per second is too low and
  result high loss rate.

Status in linux package in Ubuntu:
  Confirmed
Status in linux-firmware package in Ubuntu:
  Invalid
Status in linux source package in Xenial:
  Fix Committed
Status in linux-firmware source package in Xenial:
  Fix Committed

Bug description:
  Steps to replicate the issue:

  1. Power on the BT device, then change the terminal by "Ctil+F1" or open 
another putty to ssh SUT.
  2.Use command below to discover BLE device.
  $ sudo stdbuf -i0-o0 -e0 /snap/bluez/current/usr/bin/hcitool lescan 
--duplicates --passive | perl -nle 'print scalar(localtime), " ",$_'
  3. log as attachment.

  This bug is for tracking purposes only, do not triage.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1753439/+subscriptions

___
Mailing list: https://launchpad.net/~group.of.nepali.translators
Post to : group.of.nepali.translators@lists.launchpad.net
Unsubscribe : https://launchpad.net/~group.of.nepali.translators
More help   : https://help.launchpad.net/ListHelp

[Group.of.nepali.translators] [Bug 1753439] Re: Redpine: BLE scanning for nearby beacons per second is too low and result high loss rate.

2018-03-08 Thread Stefan Bader 
** Also affects: linux (Ubuntu Xenial)
   Importance: Undecided
   Status: New

-- 
You received this bug notification because you are a member of नेपाली
भाषा समायोजकहरुको समूह, which is subscribed to Xenial.
Matching subscriptions: Ubuntu 16.04 Bugs
https://bugs.launchpad.net/bugs/1753439

Title:
  Redpine: BLE scanning for nearby beacons per second is too low and
  result high loss rate.

Status in linux package in Ubuntu:
  Confirmed
Status in linux source package in Xenial:
  New

Bug description:
  Steps to replicate the issue:

  1. Power on the BT device, then change the terminal by "Ctil+F1" or open 
another putty to ssh SUT.
  2.Use command below to discover BLE device.
  $ sudo stdbuf -i0-o0 -e0 /snap/bluez/current/usr/bin/hcitool lescan 
--duplicates --passive | perl -nle 'print scalar(localtime), " ",$_'
  3. log as attachment.

  This bug is for tracking purposes only, do not triage.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1753439/+subscriptions

___
Mailing list: https://launchpad.net/~group.of.nepali.translators
Post to : group.of.nepali.translators@lists.launchpad.net
Unsubscribe : https://launchpad.net/~group.of.nepali.translators
More help   : https://help.launchpad.net/ListHelp