Re: [Hdf-forum] HDF5 1.8.11 release candidate is available for testing -- HighLevel library missing
Hi Pedro, Thank you for your feedback. I think you are on a Windows system but could you give more details like OS versions, platform specifics (32, 64 bits,... ), compilers, ... I will check with our Cmake person of your suggestions. A question about your suggestion 2. Wouldn't it be better to use folder names to specify different versions? E.g., ...\hdf5-1.8.11-pre1\HDF5.sln ...\hdf5-1.8.10\HDF5.sln On 4/18/13 9:47 PM, Pedro Vicente wrote: Hi Albert I tried the CMake build with T:\hdf5-1.8.11-pre1\buildcmake .. and unlike the previous hdf5-1.8.10 reported errors, no errors this time, However, the High-level library is not included in the build. The netCDF build requires the Dimension Scales library, so this is a must for netCDF users. 1) Would it be possible to have a CMake build for the High-level library ? 2) I have a suggestion, if you could name the CMake generated Visual Studio solution with the HDF5 release version name, like hdf5-1.8.11-pre1.sln instead of HDF5.sln This is helpful for anyone that uses several versions Thanks Pedro -- Pedro Vicente, Earth System Science University of California, Irvine http://www.ess.uci.edu/ - Original Message - From: Albert Cheng ach...@hdfgroup.org To: HDF Users Discussion List hdf-forum@hdfgroup.org Sent: Friday, April 12, 2013 1:59 PM Subject: [Hdf-forum] HDF5 1.8.11 release candidate is available for testing Hello everyone, A pre-release candidate version of HDF5 1.8.11 is available for testing and can be downloaded at the following link: http://www.hdfgroup.uiuc.edu/ftp/pub/outgoing/hdf5/hdf5-1.8.11/hdf5-1.8.11-pre1.tar.gz If you have some time to test this pre-release, we would greatly appreciate it. We try to test on a wide variety of platforms and environments but are unable to test everywhere so feedback from the user community is always welcome. Please note that while the release notes contained in the pre-release are reflective of the changes and additions present in this release, the 'platforms tested' and 'tested configurations' sections have yet to be updated for this version of HDF5. We plan to release HDF5 1.8.11 in mid-May barring the discovery of any critical issues. Thank you! The HDF Group ___ Hdf-forum is for HDF software users discussion. Hdf-forum@hdfgroup.org http://mail.hdfgroup.org/mailman/listinfo/hdf-forum_hdfgroup.org ___ Hdf-forum is for HDF software users discussion. Hdf-forum@hdfgroup.org http://mail.hdfgroup.org/mailman/listinfo/hdf-forum_hdfgroup.org ___ Hdf-forum is for HDF software users discussion. Hdf-forum@hdfgroup.org http://mail.hdfgroup.org/mailman/listinfo/hdf-forum_hdfgroup.org
Re: [Hdf-forum] HDF5 1.8.11 release candidate is available for testing -- HighLevel library missing
actually for #2 below the HDF5 devs _could_ do this but it might be fairly Tedious to do it. The first line of the very top level CMakeLists.txt file should have a line like: project(HDF5) It would have to be constantly updated to project(HDF5-1.8.10.pre.foo.1.whatever) and I am not sure what that really buys the developer? Typically I have several versions of HDF5 being compiled but I have them all in separate folders in my workspace. I guess from a Recent Files point of view from within Visual Studio all those show up as HDF5.sln which may not be big help. There are also other IDEs and environments that depend on having a stable project name. Imagine the following: I have using the latest Git version of HDF5. I checkout out the code and generate my solutions. Then HDF5 devs increment the version number for the project() command. If I am NOT recognizing that this is going on I am going to end up using an out of date solution file because the next time CMake runs it will generate a whole NEW solution file with the new version number but I'll still be using the older solution which would cause all sorts of problems. So it is best to just leave it the way it is. Thanks ___ Mike JacksonPrincipal Software Engineer BlueQuartz SoftwareDayton, Ohio mike.jack...@bluequartz.net www.bluequartz.net On Apr 19, 2013, at 2:59 PM, Albert Cheng wrote: Hi Pedro, Thank you for your feedback. I think you are on a Windows system but could you give more details like OS versions, platform specifics (32, 64 bits,... ), compilers, ... I will check with our Cmake person of your suggestions. A question about your suggestion 2. Wouldn't it be better to use folder names to specify different versions? E.g., ...\hdf5-1.8.11-pre1\HDF5.sln ...\hdf5-1.8.10\HDF5.sln On 4/18/13 9:47 PM, Pedro Vicente wrote: Hi Albert I tried the CMake build with T:\hdf5-1.8.11-pre1\buildcmake .. and unlike the previous hdf5-1.8.10 reported errors, no errors this time, However, the High-level library is not included in the build. The netCDF build requires the Dimension Scales library, so this is a must for netCDF users. 1) Would it be possible to have a CMake build for the High-level library ? 2) I have a suggestion, if you could name the CMake generated Visual Studio solution with the HDF5 release version name, like hdf5-1.8.11-pre1.sln instead of HDF5.sln This is helpful for anyone that uses several versions Thanks Pedro -- Pedro Vicente, Earth System Science University of California, Irvine http://www.ess.uci.edu/ - Original Message - From: Albert Cheng ach...@hdfgroup.org To: HDF Users Discussion List hdf-forum@hdfgroup.org Sent: Friday, April 12, 2013 1:59 PM Subject: [Hdf-forum] HDF5 1.8.11 release candidate is available for testing Hello everyone, A pre-release candidate version of HDF5 1.8.11 is available for testing and can be downloaded at the following link: http://www.hdfgroup.uiuc.edu/ftp/pub/outgoing/hdf5/hdf5-1.8.11/hdf5-1.8.11-pre1.tar.gz If you have some time to test this pre-release, we would greatly appreciate it. We try to test on a wide variety of platforms and environments but are unable to test everywhere so feedback from the user community is always welcome. Please note that while the release notes contained in the pre-release are reflective of the changes and additions present in this release, the 'platforms tested' and 'tested configurations' sections have yet to be updated for this version of HDF5. We plan to release HDF5 1.8.11 in mid-May barring the discovery of any critical issues. Thank you! The HDF Group ___ Hdf-forum is for HDF software users discussion. Hdf-forum@hdfgroup.org http://mail.hdfgroup.org/mailman/listinfo/hdf-forum_hdfgroup.org ___ Hdf-forum is for HDF software users discussion. Hdf-forum@hdfgroup.org http://mail.hdfgroup.org/mailman/listinfo/hdf-forum_hdfgroup.org ___ Hdf-forum is for HDF software users discussion. Hdf-forum@hdfgroup.org http://mail.hdfgroup.org/mailman/listinfo/hdf-forum_hdfgroup.org ___ Hdf-forum is for HDF software users discussion. Hdf-forum@hdfgroup.org http://mail.hdfgroup.org/mailman/listinfo/hdf-forum_hdfgroup.org
Re: [Hdf-forum] HDF5 1.8.11 release candidate is available for testing -- HighLevel library missing
Hi Albert I was able to fix that missing Fortran compiler error by editing the file in /config/cmake/cacheinit.cmake by changing ON to OFF here SET (HDF5_BUILD_FORTRAN ON CACHE BOOL Build FORTRAN support FORCE) I am not sure if this is possible to auto-detect by Cmake, if the user has the Fortran compiler ? I yes, it should be auto-detected, if not the documention should say a way to avoid the error. This command here did the job then cmake -C ../config/cmake/cacheinit.cmake -DZLIB_INCLUDE_DIR:PATH=T:\zlib-1.2.5 -DZLIB_LIBRARY:FILEPATH=T:\zlib-1.2.5\build\bin\Debug\libzlib_D.lib -DSZIP_INCLUDE_DIR:PATH=T:\szip-2.1\src -DSZIP_LIBRARY:FILEPATH=T:\szip-2.1\build\bin\Debug\libszip_D.lib .. It build everything, looks good Thanks -- Pedro Vicente, Earth System Science University of California, Irvine http://www.ess.uci.edu/ - Original Message - From: Albert Cheng ach...@hdfgroup.org To: HDF Users Discussion List hdf-forum@hdfgroup.org Sent: Friday, April 19, 2013 11:59 AM Subject: Re: [Hdf-forum] HDF5 1.8.11 release candidate is available for testing -- HighLevel library missing Hi Pedro, Thank you for your feedback. I think you are on a Windows system but could you give more details like OS versions, platform specifics (32, 64 bits,... ), compilers, ... I will check with our Cmake person of your suggestions. A question about your suggestion 2. Wouldn't it be better to use folder names to specify different versions? E.g., ...\hdf5-1.8.11-pre1\HDF5.sln ...\hdf5-1.8.10\HDF5.sln On 4/18/13 9:47 PM, Pedro Vicente wrote: Hi Albert I tried the CMake build with T:\hdf5-1.8.11-pre1\buildcmake .. and unlike the previous hdf5-1.8.10 reported errors, no errors this time, However, the High-level library is not included in the build. The netCDF build requires the Dimension Scales library, so this is a must for netCDF users. 1) Would it be possible to have a CMake build for the High-level library ? 2) I have a suggestion, if you could name the CMake generated Visual Studio solution with the HDF5 release version name, like hdf5-1.8.11-pre1.sln instead of HDF5.sln This is helpful for anyone that uses several versions Thanks Pedro -- Pedro Vicente, Earth System Science University of California, Irvine http://www.ess.uci.edu/ - Original Message - From: Albert Cheng ach...@hdfgroup.org To: HDF Users Discussion List hdf-forum@hdfgroup.org Sent: Friday, April 12, 2013 1:59 PM Subject: [Hdf-forum] HDF5 1.8.11 release candidate is available for testing Hello everyone, A pre-release candidate version of HDF5 1.8.11 is available for testing and can be downloaded at the following link: http://www.hdfgroup.uiuc.edu/ftp/pub/outgoing/hdf5/hdf5-1.8.11/hdf5-1.8.11-pre1.tar.gz If you have some time to test this pre-release, we would greatly appreciate it. We try to test on a wide variety of platforms and environments but are unable to test everywhere so feedback from the user community is always welcome. Please note that while the release notes contained in the pre-release are reflective of the changes and additions present in this release, the 'platforms tested' and 'tested configurations' sections have yet to be updated for this version of HDF5. We plan to release HDF5 1.8.11 in mid-May barring the discovery of any critical issues. Thank you! The HDF Group ___ Hdf-forum is for HDF software users discussion. Hdf-forum@hdfgroup.org http://mail.hdfgroup.org/mailman/listinfo/hdf-forum_hdfgroup.org ___ Hdf-forum is for HDF software users discussion. Hdf-forum@hdfgroup.org http://mail.hdfgroup.org/mailman/listinfo/hdf-forum_hdfgroup.org ___ Hdf-forum is for HDF software users discussion. Hdf-forum@hdfgroup.org http://mail.hdfgroup.org/mailman/listinfo/hdf-forum_hdfgroup.org ___ Hdf-forum is for HDF software users discussion. Hdf-forum@hdfgroup.org http://mail.hdfgroup.org/mailman/listinfo/hdf-forum_hdfgroup.org
Re: [Hdf-forum] HDF5 1.8.11 release candidate is available for testing -- HighLevel library missing
Hi Albert I tried the CMake build with T:\hdf5-1.8.11-pre1\buildcmake .. and unlike the previous hdf5-1.8.10 reported errors, no errors this time, However, the High-level library is not included in the build. The netCDF build requires the Dimension Scales library, so this is a must for netCDF users. 1) Would it be possible to have a CMake build for the High-level library ? 2) I have a suggestion, if you could name the CMake generated Visual Studio solution with the HDF5 release version name, like hdf5-1.8.11-pre1.sln instead of HDF5.sln This is helpful for anyone that uses several versions Thanks Pedro -- Pedro Vicente, Earth System Science University of California, Irvine http://www.ess.uci.edu/ - Original Message - From: Albert Cheng ach...@hdfgroup.org To: HDF Users Discussion List hdf-forum@hdfgroup.org Sent: Friday, April 12, 2013 1:59 PM Subject: [Hdf-forum] HDF5 1.8.11 release candidate is available for testing Hello everyone, A pre-release candidate version of HDF5 1.8.11 is available for testing and can be downloaded at the following link: http://www.hdfgroup.uiuc.edu/ftp/pub/outgoing/hdf5/hdf5-1.8.11/hdf5-1.8.11-pre1.tar.gz If you have some time to test this pre-release, we would greatly appreciate it. We try to test on a wide variety of platforms and environments but are unable to test everywhere so feedback from the user community is always welcome. Please note that while the release notes contained in the pre-release are reflective of the changes and additions present in this release, the 'platforms tested' and 'tested configurations' sections have yet to be updated for this version of HDF5. We plan to release HDF5 1.8.11 in mid-May barring the discovery of any critical issues. Thank you! The HDF Group ___ Hdf-forum is for HDF software users discussion. Hdf-forum@hdfgroup.org http://mail.hdfgroup.org/mailman/listinfo/hdf-forum_hdfgroup.org ___ Hdf-forum is for HDF software users discussion. Hdf-forum@hdfgroup.org http://mail.hdfgroup.org/mailman/listinfo/hdf-forum_hdfgroup.org