Re: [hlcoders] New Makefile problems.
Ok fixed it, you have to run dos2unix on all the makefiles before you use them thanks go to Ronny Schedel for finding this out. On Sat, Jun 14, 2008 at 3:09 PM, John [EMAIL PROTECTED] wrote: I've been trying to use the makefiles with the new orange box stuff, it appears all the line spacing is broken I've tried to correct most of it but only got so far. Other people from the IRC channel #hlcoders have had the same problem as me. Could someone from Valve upload the makefiles (not taken from steam)? ___ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlcoders
Re: [hlcoders] New Makefile problems.
Do it twice on each makefile to get rid of all DOS line breaks. Ok fixed it, you have to run dos2unix on all the makefiles before you use them thanks go to Ronny Schedel for finding this out. On Sat, Jun 14, 2008 at 3:09 PM, John [EMAIL PROTECTED] wrote: I've been trying to use the makefiles with the new orange box stuff, it appears all the line spacing is broken I've tried to correct most of it but only got so far. Other people from the IRC channel #hlcoders have had the same problem as me. Could someone from Valve upload the makefiles (not taken from steam)? ___ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlcoders ___ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlcoders
Re: [hlcoders] New Makefile problems.
Are you guys finding this necessary on the makefiles that were included in last week's beta? I did all of the editing/saving of those on my Linux box so I'm surprised that this is a problem. -Mike -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of John Sent: Monday, June 16, 2008 7:46 AM To: hlcoders@list.valvesoftware.com Subject: Re: [hlcoders] New Makefile problems. Ok fixed it, you have to run dos2unix on all the makefiles before you use them thanks go to Ronny Schedel for finding this out. On Sat, Jun 14, 2008 at 3:09 PM, John [EMAIL PROTECTED] wrote: I've been trying to use the makefiles with the new orange box stuff, it appears all the line spacing is broken I've tried to correct most of it but only got so far. Other people from the IRC channel #hlcoders have had the same problem as me. Could someone from Valve upload the makefiles (not taken from steam)? ___ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlcoders ___ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlcoders
Re: [hlcoders] New Makefile problems.
The current makefiles have double DOS endline characters in it (0x10, 0x13, 0x10, 0x13). On Debian it leads to non working makefiles. I don't remember the correct error message, but it was completly different from the real problem. If you have only one DOS endline (0x10, 0x13) then there is no problem. Are you guys finding this necessary on the makefiles that were included in last week's beta? I did all of the editing/saving of those on my Linux box so I'm surprised that this is a problem. -Mike -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of John Sent: Monday, June 16, 2008 7:46 AM To: hlcoders@list.valvesoftware.com Subject: Re: [hlcoders] New Makefile problems. Ok fixed it, you have to run dos2unix on all the makefiles before you use them thanks go to Ronny Schedel for finding this out. On Sat, Jun 14, 2008 at 3:09 PM, John [EMAIL PROTECTED] wrote: I've been trying to use the makefiles with the new orange box stuff, it appears all the line spacing is broken I've tried to correct most of it but only got so far. Other people from the IRC channel #hlcoders have had the same problem as me. Could someone from Valve upload the makefiles (not taken from steam)? ___ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlcoders ___ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlcoders ___ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlcoders
Re: [hlcoders] New Makefile problems.
how are you guys copying your makefiles over to your linux machine? if you're using ftp for example, the formatting can get messed up that way. On Mon, Jun 16, 2008 at 1:09 PM, Mike Durand [EMAIL PROTECTED] wrote: Are you guys finding this necessary on the makefiles that were included in last week's beta? I did all of the editing/saving of those on my Linux box so I'm surprised that this is a problem. -Mike -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of John Sent: Monday, June 16, 2008 7:46 AM To: hlcoders@list.valvesoftware.com Subject: Re: [hlcoders] New Makefile problems. Ok fixed it, you have to run dos2unix on all the makefiles before you use them thanks go to Ronny Schedel for finding this out. On Sat, Jun 14, 2008 at 3:09 PM, John [EMAIL PROTECTED] wrote: I've been trying to use the makefiles with the new orange box stuff, it appears all the line spacing is broken I've tried to correct most of it but only got so far. Other people from the IRC channel #hlcoders have had the same problem as me. Could someone from Valve upload the makefiles (not taken from steam)? ___ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlcoders ___ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlcoders -- -Tony ___ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlcoders
Re: [hlcoders] New Makefile problems.
Mike Durand wrote: Are you guys finding this necessary on the makefiles that were included in last week's beta? I did all of the editing/saving of those on my Linux box so I'm surprised that this is a problem. If files were FTPed from a Windoze box to a Linux box, the FTP app would introduce CR/LF in place of newlines (unless FTP was set up properly to know that the client/server we using different text file formats). -- Jeffrey botman Broome ___ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlcoders
Re: [hlcoders] New Makefile problems.
Mike I think because most of the people are downloading the SDK on windows then uploading it on their linux box via SVN of FTP so the makefile get corrupted. I think adding a remark try to dos2unix the makefiles before using it would be worth it. On 6/16/08, Ronny Schedel [EMAIL PROTECTED] wrote: The current makefiles have double DOS endline characters in it (0x10, 0x13, 0x10, 0x13). On Debian it leads to non working makefiles. I don't remember the correct error message, but it was completly different from the real problem. If you have only one DOS endline (0x10, 0x13) then there is no problem. Are you guys finding this necessary on the makefiles that were included in last week's beta? I did all of the editing/saving of those on my Linux box so I'm surprised that this is a problem. -Mike -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of John Sent: Monday, June 16, 2008 7:46 AM To: hlcoders@list.valvesoftware.com Subject: Re: [hlcoders] New Makefile problems. Ok fixed it, you have to run dos2unix on all the makefiles before you use them thanks go to Ronny Schedel for finding this out. On Sat, Jun 14, 2008 at 3:09 PM, John [EMAIL PROTECTED] wrote: I've been trying to use the makefiles with the new orange box stuff, it appears all the line spacing is broken I've tried to correct most of it but only got so far. Other people from the IRC channel #hlcoders have had the same problem as me. Could someone from Valve upload the makefiles (not taken from steam)? ___ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlcoders ___ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlcoders ___ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlcoders ___ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlcoders
Re: [hlcoders] New Makefile problems.
The problem is not on our end, the files are corrupted in the gcf. I copied the files with samba, so no cr/lf problem on my side. Mike I think because most of the people are downloading the SDK on windows then uploading it on their linux box via SVN of FTP so the makefile get corrupted. I think adding a remark try to dos2unix the makefiles before using it would be worth it. On 6/16/08, Ronny Schedel [EMAIL PROTECTED] wrote: The current makefiles have double DOS endline characters in it (0x10, 0x13, 0x10, 0x13). On Debian it leads to non working makefiles. I don't remember the correct error message, but it was completly different from the real problem. If you have only one DOS endline (0x10, 0x13) then there is no problem. Are you guys finding this necessary on the makefiles that were included in last week's beta? I did all of the editing/saving of those on my Linux box so I'm surprised that this is a problem. -Mike -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of John Sent: Monday, June 16, 2008 7:46 AM To: hlcoders@list.valvesoftware.com Subject: Re: [hlcoders] New Makefile problems. Ok fixed it, you have to run dos2unix on all the makefiles before you use them thanks go to Ronny Schedel for finding this out. On Sat, Jun 14, 2008 at 3:09 PM, John [EMAIL PROTECTED] wrote: I've been trying to use the makefiles with the new orange box stuff, it appears all the line spacing is broken I've tried to correct most of it but only got so far. Other people from the IRC channel #hlcoders have had the same problem as me. Could someone from Valve upload the makefiles (not taken from steam)? ___ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlcoders ___ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlcoders ___ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlcoders ___ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlcoders ___ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlcoders
Re: [hlcoders] New Makefile problems.
I don't know whether this is relevant or not, but Notepad++ reports that the files are in /Mac/ format! Ronny Schedel wrote: The current makefiles have double DOS endline characters in it (0x10, 0x13, 0x10, 0x13). On Debian it leads to non working makefiles. I don't remember the correct error message, but it was completly different from the real problem. If you have only one DOS endline (0x10, 0x13) then there is no problem. Are you guys finding this necessary on the makefiles that were included in last week's beta? I did all of the editing/saving of those on my Linux box so I'm surprised that this is a problem. -Mike -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of John Sent: Monday, June 16, 2008 7:46 AM To: hlcoders@list.valvesoftware.com Subject: Re: [hlcoders] New Makefile problems. Ok fixed it, you have to run dos2unix on all the makefiles before you use them thanks go to Ronny Schedel for finding this out. On Sat, Jun 14, 2008 at 3:09 PM, John [EMAIL PROTECTED] wrote: I've been trying to use the makefiles with the new orange box stuff, it appears all the line spacing is broken I've tried to correct most of it but only got so far. Other people from the IRC channel #hlcoders have had the same problem as me. Could someone from Valve upload the makefiles (not taken from steam)? ___ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlcoders ___ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlcoders ___ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlcoders ___ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlcoders
Re: [hlcoders] New Makefile problems.
I was using samba On Mon, Jun 16, 2008 at 7:15 PM, Tom Edwards [EMAIL PROTECTED] wrote: I don't know whether this is relevant or not, but Notepad++ reports that the files are in /Mac/ format! Ronny Schedel wrote: The current makefiles have double DOS endline characters in it (0x10, 0x13, 0x10, 0x13). On Debian it leads to non working makefiles. I don't remember the correct error message, but it was completly different from the real problem. If you have only one DOS endline (0x10, 0x13) then there is no problem. Are you guys finding this necessary on the makefiles that were included in last week's beta? I did all of the editing/saving of those on my Linux box so I'm surprised that this is a problem. -Mike -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of John Sent: Monday, June 16, 2008 7:46 AM To: hlcoders@list.valvesoftware.com Subject: Re: [hlcoders] New Makefile problems. Ok fixed it, you have to run dos2unix on all the makefiles before you use them thanks go to Ronny Schedel for finding this out. On Sat, Jun 14, 2008 at 3:09 PM, John [EMAIL PROTECTED] wrote: I've been trying to use the makefiles with the new orange box stuff, it appears all the line spacing is broken I've tried to correct most of it but only got so far. Other people from the IRC channel #hlcoders have had the same problem as me. Could someone from Valve upload the makefiles (not taken from steam)? ___ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlcoders ___ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlcoders ___ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlcoders ___ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlcoders ___ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlcoders
Re: [hlcoders] New Makefile problems.
DOS Endings are 0x13 0x10 not 0x10 0x13 If the latter is what is in those files then thats probably what is screwing notepad++ up ;) Tom Edwards wrote: I don't know whether this is relevant or not, but Notepad++ reports that the files are in /Mac/ format! Ronny Schedel wrote: The current makefiles have double DOS endline characters in it (0x10, 0x13, 0x10, 0x13). On Debian it leads to non working makefiles. I don't remember the correct error message, but it was completly different from the real problem. If you have only one DOS endline (0x10, 0x13) then there is no problem. Are you guys finding this necessary on the makefiles that were included in last week's beta? I did all of the editing/saving of those on my Linux box so I'm surprised that this is a problem. -Mike -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of John Sent: Monday, June 16, 2008 7:46 AM To: hlcoders@list.valvesoftware.com Subject: Re: [hlcoders] New Makefile problems. Ok fixed it, you have to run dos2unix on all the makefiles before you use them thanks go to Ronny Schedel for finding this out. On Sat, Jun 14, 2008 at 3:09 PM, John [EMAIL PROTECTED] wrote: I've been trying to use the makefiles with the new orange box stuff, it appears all the line spacing is broken I've tried to correct most of it but only got so far. Other people from the IRC channel #hlcoders have had the same problem as me. Could someone from Valve upload the makefiles (not taken from steam)? ___ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlcoders ___ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlcoders ___ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlcoders ___ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlcoders ___ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlcoders
Re: [hlcoders] New Makefile problems.
Could be vice versa, I don't remember the exact order.. DOS Endings are 0x13 0x10 not 0x10 0x13 If the latter is what is in those files then thats probably what is screwing notepad++ up ;) Tom Edwards wrote: I don't know whether this is relevant or not, but Notepad++ reports that the files are in /Mac/ format! Ronny Schedel wrote: The current makefiles have double DOS endline characters in it (0x10, 0x13, 0x10, 0x13). On Debian it leads to non working makefiles. I don't remember the correct error message, but it was completly different from the real problem. If you have only one DOS endline (0x10, 0x13) then there is no problem. Are you guys finding this necessary on the makefiles that were included in last week's beta? I did all of the editing/saving of those on my Linux box so I'm surprised that this is a problem. -Mike -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of John Sent: Monday, June 16, 2008 7:46 AM To: hlcoders@list.valvesoftware.com Subject: Re: [hlcoders] New Makefile problems. Ok fixed it, you have to run dos2unix on all the makefiles before you use them thanks go to Ronny Schedel for finding this out. On Sat, Jun 14, 2008 at 3:09 PM, John [EMAIL PROTECTED] wrote: I've been trying to use the makefiles with the new orange box stuff, it appears all the line spacing is broken I've tried to correct most of it but only got so far. Other people from the IRC channel #hlcoders have had the same problem as me. Could someone from Valve upload the makefiles (not taken from steam)? ___ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlcoders ___ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlcoders ___ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlcoders ___ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlcoders ___ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlcoders ___ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlcoders
Re: [hlcoders] New Makefile problems.
Let me and my trusty hex editor (shameless plug: XVI32 -- I like it even though it's written in Pascal) shed some light on this issue. I extracted the Makefiles from sourcesdk.gcf using GCFScape, which I'm pretty sure doesn't transform line endings in the slightest. The hex dump of the files displayed a rather weird combination of newline characters: \r\r\n (0x0D 0x0D 0x0A, CRCRLF). Perhaps somebody assembling the depot FTP'd the Makefiles, which were in CRLF format on Mike's Linux box, using ASCII mode to his Windows machine, which converted the LFs to CRLFs, yielding CRCRLF. Running dos2unix on the Makefiles should convert every occurence of CRLF to LF, thereby turning every CRCRLF to a simple CRLF. I don't know if this necessitates a fresh code drop, but could it be at least queued for the next SDK update? Kthxbai, ~~ Ondra On 16.06.08 19:09 Uhr, Mike Durand wrote: Are you guys finding this necessary on the makefiles that were included in last week's beta? I did all of the editing/saving of those on my Linux box so I'm surprised that this is a problem. -Mike ___ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlcoders
Re: [hlcoders] New Makefile problems.
Both wrong. DOS endings are CRLF, i.e. 13, 10 or 0x0A 0x0D. 0x13 is Device Control 3 and 0x10 is Data Link Escape. But we're splitting hairs here... ~~ Ondra On 16.06.08 20:29 Uhr, Tom Leighton wrote: DOS Endings are 0x13 0x10 not 0x10 0x13 If the latter is what is in those files then thats probably what is screwing notepad++ up ;) Tom Edwards wrote: I don't know whether this is relevant or not, but Notepad++ reports that the files are in /Mac/ format! Ronny Schedel wrote: The current makefiles have double DOS endline characters in it (0x10, 0x13, 0x10, 0x13). On Debian it leads to non working makefiles. I don't remember the correct error message, but it was completly different from the real problem. If you have only one DOS endline (0x10, 0x13) then there is no problem. ___ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlcoders
Re: [hlcoders] New Makefile problems.
You know what we meant :P Ondřej Hošek wrote: Both wrong. DOS endings are CRLF, i.e. 13, 10 or 0x0A 0x0D. 0x13 is Device Control 3 and 0x10 is Data Link Escape. But we're splitting hairs here... ~~ Ondra On 16.06.08 20:29 Uhr, Tom Leighton wrote: DOS Endings are 0x13 0x10 not 0x10 0x13 If the latter is what is in those files then thats probably what is screwing notepad++ up ;) Tom Edwards wrote: I don't know whether this is relevant or not, but Notepad++ reports that the files are in /Mac/ format! Ronny Schedel wrote: The current makefiles have double DOS endline characters in it (0x10, 0x13, 0x10, 0x13). On Debian it leads to non working makefiles. I don't remember the correct error message, but it was completly different from the real problem. If you have only one DOS endline (0x10, 0x13) then there is no problem. ___ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlcoders ___ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlcoders
