Re: Channel Detected errors only 1 lpar, 1 job, 1 vsm
-- snip -- Alright this is a head scratcher at least for me... We have recently installed a VSM5 and also have some VSM4's in the mix. We have one job that runs that is continually getting channel detected errors every time it runs and the errors are only occurring on the VSM5. Below is a small example. It shows one tape mount that works fine, and then the other that gets the error... This is using FDR so perhaps Bruce Black has some insight... . . . IOS050I CHANNEL DETECTED ERROR ON 1891,17,01,**02,PCHID=0231 IOS050I CHANNEL DETECTED ERROR ON 1891,13,01,**02,PCHID=0140 -- snip -- If writing this data set to a VSM4 type works, and doesn't work on the VSM5, then you should open a problem with SUN. You may need to take VTCS and GTF trace data, but the SUN technical people will request what data they need. My customer has a couple of VSM5 systems installed and we do not have the problem you are describing (DFDSS user). John -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Channel Detected errors only 1 lpar, 1 job, 1 vsm
John, Go to the HMC and do problem analysis on the PCHID to see if you are getting sequence errors. Possibly a bad cable or connection. Doug - Original Message - From: John Ticic [EMAIL PROTECTED] Newsgroups: bit.listserv.ibm-main To: IBM-MAIN@BAMA.UA.EDU Sent: Monday, May 14, 2007 5:32 AM Subject: Re: Channel Detected errors only 1 lpar, 1 job, 1 vsm -- snip -- Alright this is a head scratcher at least for me... We have recently installed a VSM5 and also have some VSM4's in the mix. We have one job that runs that is continually getting channel detected errors every time it runs and the errors are only occurring on the VSM5. Below is a small example. It shows one tape mount that works fine, and then the other that gets the error... This is using FDR so perhaps Bruce Black has some insight... . . . IOS050I CHANNEL DETECTED ERROR ON 1891,17,01,**02,PCHID=0231 IOS050I CHANNEL DETECTED ERROR ON 1891,13,01,**02,PCHID=0140 -- snip -- If writing this data set to a VSM4 type works, and doesn't work on the VSM5, then you should open a problem with SUN. You may need to take VTCS and GTF trace data, but the SUN technical people will request what data they need. My customer has a couple of VSM5 systems installed and we do not have the problem you are describing (DFDSS user). John -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Channel Detected errors only 1 lpar, 1 job, 1 vsm
-- snip -- John, Go to the HMC and do problem analysis on the PCHID to see if you are getting sequence errors. Possibly a bad cable or connection. Doug - Original Message - IOS050I CHANNEL DETECTED ERROR ON 1891,17,01,**02,PCHID=0231 IOS050I CHANNEL DETECTED ERROR ON 1891,13,01,**02,PCHID=0140 -- snip -- Doug, the errors occur on two different channels (and PCHIDs). If the VSM5 box is connected to a director or a switch of some kind, then I suppose that the cable between switch and VSM5 could be causing the problems. The originator of this thread didn't say whether he'd tried all paths, or how the box is connected to his server (I was going to write CEC !!). John (not the originator) -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Channel Detected errors only 1 lpar, 1 job, 1 vsm
A problem was already opened with Sun. Now here is what they found. There is another shop with the exact same problem. It has only been seen when using FDR and a mix of VSM4's and VSM5's. If it creates one tape on a VSM4 then tries to create another on a VSM5 then it get's the error. So we've simply varied the VSM5 drives offline to this one system. John Benik United Health Technologies Mainframe Storage Management [EMAIL PROTECTED] 763-744-0683 This e-mail, including attachments, may include confidential and/or proprietary information, and may be used only by the person or entity to which it is addressed. If the reader of this e-mail is not the intended recipient or his or her authorized agent, the reader is hereby notified that any dissemination, distribution or copying of this e-mail is prohibited. If you have received this e-mail in error, please notify the sender by replying to this message and delete this e-mail immediately. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Channel Detected errors only 1 lpar, 1 job, 1 vsm
IOS050I CHANNEL DETECTED ERROR ON 1891,17,01,**02,PCHID=0231 IOS050I CHANNEL DETECTED ERROR ON 1891,13,01,**02,PCHID=0140 All I can say for sure is that the **02 (channel status) indicates interface control check. for real devices, this indicates some problem on the channel or the channel adaptor on the control unit. For VSM I have no clue, but perhaps they use this to report some condition in the VSM. -- Bruce A. Black Senior Software Developer for FDR Innovation Data Processing 973-890-7300 personal: [EMAIL PROTECTED] sales info: [EMAIL PROTECTED] tech support: [EMAIL PROTECTED] web: www.innovationdp.fdr.com -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Channel Detected errors only 1 lpar, 1 job, 1 vsm
Alright this is a head scratcher at least for me... We have recently installed a VSM5 and also have some VSM4's in the mix. We have one job that runs that is continually getting channel detected errors every time it runs and the errors are only occurring on the VSM5. Below is a small example. It shows one tape mount that works fine, and then the other that gets the error... This is using FDR so perhaps Bruce Black has some insight... IEC705I TAPE ON 19BE,G50143,SL,COMP,$FDR#02D,BACKUP,PNB100$O. IEC205I TAPE2,$FDR#02D,BACKUP,FILESEQ=1, COMPLETE VOLUME DSN=PNB100$O.BK.$FDR#02D.GMOD02.G0394V00,VOLS=G50138,G50143, TOTALBLOCKS=96481 IEC501A M 1891,PRIVAT,SL,COMP,$FDR#02D,BACKUP,PNB100$O.BK.$FD TMS001 IEC501A M 1891,PRIVAT,SL,COMP,$FDR#02D,BACKUP,PNB100$ IECTMS9 1891,G50144,$FDR#02D,TAPE3 ,CATALOG ,0001,D.GMOD0 IEC705I TAPE ON 1891,G50144,SL,COMP,$FDR#02D,BACKUP,PNB100$O. IOS050I CHANNEL DETECTED ERROR ON 1891,17,01,**02,PCHID=0231 IOS050I CHANNEL DETECTED ERROR ON 1891,13,01,**02,PCHID=0140 -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html