Re: HSM Recall Failure
Hi Theo, Did you find the cause of the problem and what was done to fix it? Thanks. From: Buckton, T. (Theo) the...@nedbank.co.za To: IBM-MAIN@bama.ua.edu Sent: Friday, February 24, 2012 5:19:52 AM Subject: HSM Recall Failure Hi There, I'm trying to recall a data set migrated to ML2. The recall fails due to errors found in either the VVDS or VTOC. Is there somebody that would be able to point me in the right direction of investigation PAGE 0001 5695-DF175 DFSMSDSS V1R12.0 DATA SET SERVICES 2012.055 11:55 ADR035I (SCH)-PRIME(06), INSTALLATION EXIT ALTERED BYPASS FAC CLASS CHK DEFAULT TO YES RESTORE INDDNAME(SYS79943) CAT SPHERE - BYPASSACS(PNGG00.IT3PCK.CSDITB.D0.KS250 ) - MGMTCLAS(@959 ) - STORCLAS(B2B26 ) - DATASET(INCLUDE(PNGG00.IT3PCK.CSDITB.D0.KS250 )) ADR101I (R/I)-RI01 (01), TASKID 001 HAS BEEN ASSIGNED TO COMMAND 'RESTORE ' ADR109I (R/I)-RI01 (01), 2012.055 11:55:12 INITIAL SCAN OF USER CONTROL STATEME NTS COMPLETED ADR050I (001)-PRIME(01), DFSMSDSS INVOKED VIA APPLICATION INTERFACE ADR016I (001)-PRIME(01), RACF LOGGING OPTION IN EFFECT FOR THIS TASK ADR006I (001)-STEND(01), 2012.055 11:55:12 EXECUTION BEGINS ADR780I (001)-TDDS (01), THE INPUT DUMP DATA SET BEING PROCESSED IS IN LOGICAL DATA SET FORMAT AND WAS CREATED BY DFSMSDSS VERSION 1 RELEASE 12 MODIFICATION LEVEL 0 ON 2011.270 06:45:10 ADR711I (001)-NEWDS(01), DATA SET PNGG00.IT3PCK.CSDITB.D0.KS250 HAS BEEN ALLOCATED USING STORCLAS B2B26, DATACLAS @KS250, AND MGMTCLAS @959 ADR788I (001)-TDUNL(01), PROCESSING COMPLETED FOR CLUSTER PNGG00.IT3PCK.CSDITB. D0.KS250, 16552872 RECORD(S) PROCESSED ADR477E (001)-TDRF1(01), VVDS/VVR/CELL ERRORS ENCOUNTERED FOR CLUSTER PNGG00.IT 3PCK.CSDITB.D0.KS250 ADR417W (001)-TDRF1(05), COPY/RESTORE OF DATA SET PNGG00.IT3PCK.CSDITB.D0.KS250 IS INCOMPLETE, 05 ADR415W (001)-TDLOG(01), NO DATA SETS WERE COPIED, DUMPED, OR RESTORED FROM ANY VOLUME ADR480W (001)-TDLOG(01), THE FOLLOWING DATA SETS WERE NOT PROCESSED FROM THE LO GICALLY FORMATTED DUMP TAPE DUE TO ERRORS: PNGG00.IT3PCK.CSDITB.D0.KS250 ADR006I (001)-STEND(02), 2012.055 12:11:00 EXECUTION ENDS ADR013I (001)-CLTSK(01), 2012.055 12:11:00 TASK COMPLETED WITH RETURN CODE 0008 ADR012I (SCH)-DSSU (01), 2012.055 12:11:00 DFSMSDSS PROCESSING COMPLETE. HIGHES T RETURN CODE IS 0008 FROM: TASK 001 ARC1001I PNGG00.IT3PCK.CSDITB.D0.KS250 RECALL FAILED, RC=0069, REAS=0477 ARC1169I RECALL/RECOVER FAILED DUE TO AN ERROR IN DFDSS *** -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of Buckton, T. (Theo) Sent: 24 February 2012 11:33 AM To: IBM-MAIN@bama.ua.edu Subject: VVDS with no catalog pointers Hi There, Please explain why not all VVDSs catalog pointers. When doing a listcat, the return is as follows: IDC3012I ENTRY SYS1.VVDS.VAPBPC7 NOT FOUND+ IDC1566I ** SYS1.VVDS.VAPBPC7 NOT LISTED IDC0014I LASTCC=4 IDC3009I ** VSAM CATALOG RETURN CODE IS 8 - REASON CODE IS IGG0CLEG-42 *** Apparently this is normal. I want to see the logic here. BTW, these are sms-managed volumes. Nedbank Limited Reg No 1951/09/06. The following link displays the names of the Nedbank Board of Directors and Company Secretary. [ http://www.nedbank.co.za/terms/DirectorsNedbank.htm ] This email is confidential and is intended for the addressee only. The following link will take you to Nedbank's legal notice. [ http://www.nedbank.co.za/terms/EmailDisclaimer.htm ] -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: INFO
Re: HSM Recall Failure
Still sitting with this problem. It seems like this is neither a HSM or a VVDS size issue. The space in the SMS pool is also sufficient to this huge data set. It seems more like a ADRDSSU issue. A restore with a rename for a similar data set was attempted, and the results were the same: RESTORE INDD(TAPEIN) - DS(INCL( - PNGG00.CSPACK.CSDITB.**, - )) - RENAMEU ( - (PNGG00.CSPACK.CSDITB.**,QNGG00.WSPACK.CSDITB.**), - ) CATALOG SPHERE ADR101I (R/I)-RI01 (01), TASKID 001 HAS BEEN ASSIGNED TO COMMAND 'RESTORE ' ADR109I (R/I)-RI01 (01), 2012.069 14:38:00 INITIAL SCAN OF USER CONTROL STATEMENTS COMPLETED ADR016I (001)-PRIME(01), RACF LOGGING OPTION IN EFFECT FOR THIS TASK 0ADR006I (001)-STEND(01), 2012.069 14:38:00 EXECUTION BEGINS 0ADR780I (001)-TDDS (01), THE INPUT DUMP DATA SET BEING PROCESSED IS IN LOGICAL DATA SET FORMAT AND WAS CREATED BY DFSMSDSS VERSION 1 RELEASE 12 MODIFICATION LEVEL 0 ON 2012.061 14:10:03 0ADR711I (001)-NEWDS(01), DATA SET PNGG00.CSPACK.CSDITB.D0.KS250 HAS BEEN ALLOCATED WITH NEWNAME QNGG00.WSPACK.CSDITB.D0.KS250 USING STORCLAS B2B26, DATACLAS @KS250, AND MGMTCLAS @939R 0ADR788I (001)-TDUNL(01), PROCESSING COMPLETED FOR CLUSTER PNGG00.CSPACK.CSDITB.D0.KS250, 30109794 RECORD(S) PROCESSED 0ADR477E (001)-TDRF1(01), VVDS/VVR/CELL ERRORS ENCOUNTERED FOR CLUSTER PNGG00.CSPACK.CSDITB.D0.KS250 0ADR417W (001)-TDRF1(05), COPY/RESTORE OF DATA SET PNGG00.CSPACK.CSDITB.D0.KS250 IS INCOMPLETE, 05 0ADR415W (001)-TDLOG(01), NO DATA SETS WERE COPIED, DUMPED, OR RESTORED FROM ANY VOLUME 0ADR480W (001)-TDLOG(01), THE FOLLOWING DATA SETS WERE NOT PROCESSED FROM THE LOGICALLY FORMATTED DUMP TAPE DUE TO ERRORS: 0 PNGG00.CSPACK.CSDITB.D0.KS250 0ADR006I (001)-STEND(02), 2012.069 14:50:23 EXECUTION ENDS 0ADR013I (001)-CLTSK(01), 2012.069 14:50:23 TASK COMPLETED WITH RETURN CODE 0008 0ADR012I (SCH)-DSSU (01), 2012.069 14:50:23 DFSMSDSS PROCESSING COMPLETE. HIGHEST RETURN CODE IS 0008 FROM: TASK001 Any suggestions... :( -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of Lizette Koehler Sent: 24 February 2012 02:07 PM To: IBM-MAIN@bama.ua.edu Subject: Re: HSM Recall Failure Hi There, I'm trying to recall a data set migrated to ML2. The recall fails due to errors found in either the VVDS or VTOC. Is there somebody that would be able to point me in the right direction of investigation PAGE 0001 5695-DF175 DFSMSDSS V1R12.0 DATA SET SERVICES 2012.055 11:55 ADR035I (SCH)-PRIME(06), INSTALLATION EXIT ALTERED BYPASS FAC CLASS CHK DEFAULT TO YES RESTORE INDDNAME(SYS79943) CAT SPHERE - BYPASSACS(PNGG00.IT3PCK.CSDITB.D0.KS250 ) - MGMTCLAS(@959 ) - STORCLAS(B2B26 ) - DATASET(INCLUDE(PNGG00.IT3PCK.CSDITB.D0.KS250 )) ADR101I (R/I)-RI01 (01), TASKID 001 HAS BEEN ASSIGNED TO COMMAND 'RESTORE ' ADR109I (R/I)-RI01 (01), 2012.055 11:55:12 INITIAL SCAN OF USER CONTROL STATEME NTS COMPLETED ADR050I (001)-PRIME(01), DFSMSDSS INVOKED VIA APPLICATION INTERFACE ADR016I (001)-PRIME(01), RACF LOGGING OPTION IN EFFECT FOR THIS TASK ADR006I (001)-STEND(01), 2012.055 11:55:12 EXECUTION BEGINS ADR780I (001)-TDDS (01), THE INPUT DUMP DATA SET BEING PROCESSED IS IN LOGICAL DATA SET FORMAT AND WAS CREATED BY DFSMSDSS VERSION 1 RELEASE 12 MODIFICATION LEVEL 0 ON 2011.270 06:45:10 ADR711I (001)-NEWDS(01), DATA SET PNGG00.IT3PCK.CSDITB.D0.KS250 HAS BEEN ALLOCATED USING STORCLAS B2B26, DATACLAS @KS250, AND MGMTCLAS @959 ADR788I (001)-TDUNL(01), PROCESSING COMPLETED FOR CLUSTER PNGG00.IT3PCK.CSDITB. D0.KS250, 16552872 RECORD(S) PROCESSED ADR477E (001)-TDRF1(01), VVDS/VVR/CELL ERRORS ENCOUNTERED FOR CLUSTER PNGG00.IT 3PCK.CSDITB.D0.KS250 ADR417W (001)-TDRF1(05), COPY/RESTORE OF DATA SET PNGG00.IT3PCK.CSDITB.D0.KS250 IS INCOMPLETE, 05 ADR415W (001)-TDLOG(01), NO DATA SETS WERE COPIED, DUMPED, OR RESTORED FROM ANY VOLUME ADR480W (001)-TDLOG(01), THE FOLLOWING DATA SETS WERE NOT PROCESSED FROM THE LO GICALLY FORMATTED DUMP TAPE DUE TO ERRORS: PNGG00.IT3PCK.CSDITB.D0.KS250 ADR006I (001)-STEND(02), 2012.055 12:11:00 EXECUTION ENDS ADR013I (001)-CLTSK(01), 2012.055 12:11:00 TASK COMPLETED WITH RETURN CODE 0008 ADR012I (SCH)-DSSU (01), 2012.055 12:11:00 DFSMSDSS PROCESSING COMPLETE. HIGHES T RETURN CODE IS 0008 FROM: TASK001 ARC1001I PNGG00.IT3PCK.CSDITB.D0.KS250 RECALL FAILED, RC=0069, REAS=0477 ARC1169I RECALL/RECOVER FAILED DUE TO AN ERROR IN DFDSS *** Hi There, Please explain why not all VVDSs catalog pointers. When doing a listcat, the return is as follows: IDC3012I ENTRY SYS1.VVDS.VAPBPC7 NOT FOUND+ IDC1566I ** SYS1.VVDS.VAPBPC7 NOT LISTED
Re: HSM Recall Failure
Explanation for ADR477E says: An error was encountered processing a VVR: Run access method services DIAGNOSE against the appropriate VVDS to determine the nature of the error and take the recommended action. _ Dave Jousma Assistant Vice President, Mainframe Services david.jou...@53.com 1830 East Paris, Grand Rapids, MI 49546 MD RSCB2H p 616.653.8429 f 616.653.2717 -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of Buckton, T. (Theo) Sent: Friday, March 09, 2012 8:34 AM To: IBM-MAIN@bama.ua.edu Subject: Re: HSM Recall Failure Still sitting with this problem. It seems like this is neither a HSM or a VVDS size issue. The space in the SMS pool is also sufficient to this huge data set. It seems more like a ADRDSSU issue. A restore with a rename for a similar data set was attempted, and the results were the same: RESTORE INDD(TAPEIN) - DS(INCL( - PNGG00.CSPACK.CSDITB.**, - )) - RENAMEU ( - (PNGG00.CSPACK.CSDITB.**,QNGG00.WSPACK.CSDITB.**), - ) CATALOG SPHERE ADR101I (R/I)-RI01 (01), TASKID 001 HAS BEEN ASSIGNED TO COMMAND 'RESTORE ' ADR109I (R/I)-RI01 (01), 2012.069 14:38:00 INITIAL SCAN OF USER CONTROL STATEMENTS COMPLETED ADR016I (001)-PRIME(01), RACF LOGGING OPTION IN EFFECT FOR THIS TASK 0ADR006I (001)-STEND(01), 2012.069 14:38:00 EXECUTION BEGINS 0ADR780I (001)-TDDS (01), THE INPUT DUMP DATA SET BEING PROCESSED IS IN LOGICAL DATA SET FORMAT AND WAS CREATED BY DFSMSDSS VERSION 1 RELEASE 12 MODIFICATION LEVEL 0 ON 2012.061 14:10:03 0ADR711I (001)-NEWDS(01), DATA SET PNGG00.CSPACK.CSDITB.D0.KS250 HAS BEEN ALLOCATED WITH NEWNAME QNGG00.WSPACK.CSDITB.D0.KS250 USING STORCLAS B2B26, DATACLAS @KS250, AND MGMTCLAS @939R 0ADR788I (001)-TDUNL(01), PROCESSING COMPLETED FOR CLUSTER PNGG00.CSPACK.CSDITB.D0.KS250, 30109794 RECORD(S) PROCESSED 0ADR477E (001)-TDRF1(01), VVDS/VVR/CELL ERRORS ENCOUNTERED FOR CLUSTER PNGG00.CSPACK.CSDITB.D0.KS250 0ADR417W (001)-TDRF1(05), COPY/RESTORE OF DATA SET PNGG00.CSPACK.CSDITB.D0.KS250 IS INCOMPLETE, 05 0ADR415W (001)-TDLOG(01), NO DATA SETS WERE COPIED, DUMPED, OR RESTORED FROM ANY VOLUME 0ADR480W (001)-TDLOG(01), THE FOLLOWING DATA SETS WERE NOT PROCESSED FROM THE LOGICALLY FORMATTED DUMP TAPE DUE TO ERRORS: 0 PNGG00.CSPACK.CSDITB.D0.KS250 0ADR006I (001)-STEND(02), 2012.069 14:50:23 EXECUTION ENDS 0ADR013I (001)-CLTSK(01), 2012.069 14:50:23 TASK COMPLETED WITH RETURN CODE 0008 0ADR012I (SCH)-DSSU (01), 2012.069 14:50:23 DFSMSDSS PROCESSING COMPLETE. HIGHEST RETURN CODE IS 0008 FROM: TASK001 Any suggestions... :( -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of Lizette Koehler Sent: 24 February 2012 02:07 PM To: IBM-MAIN@bama.ua.edu Subject: Re: HSM Recall Failure Hi There, I'm trying to recall a data set migrated to ML2. The recall fails due to errors found in either the VVDS or VTOC. Is there somebody that would be able to point me in the right direction of investigation PAGE 0001 5695-DF175 DFSMSDSS V1R12.0 DATA SET SERVICES 2012.055 11:55 ADR035I (SCH)-PRIME(06), INSTALLATION EXIT ALTERED BYPASS FAC CLASS CHK DEFAULT TO YES RESTORE INDDNAME(SYS79943) CAT SPHERE - BYPASSACS(PNGG00.IT3PCK.CSDITB.D0.KS250 ) - MGMTCLAS(@959 ) - STORCLAS(B2B26 ) - DATASET(INCLUDE(PNGG00.IT3PCK.CSDITB.D0.KS250 )) ADR101I (R/I)-RI01 (01), TASKID 001 HAS BEEN ASSIGNED TO COMMAND 'RESTORE ' ADR109I (R/I)-RI01 (01), 2012.055 11:55:12 INITIAL SCAN OF USER CONTROL STATEME NTS COMPLETED ADR050I (001)-PRIME(01), DFSMSDSS INVOKED VIA APPLICATION INTERFACE ADR016I (001)-PRIME(01), RACF LOGGING OPTION IN EFFECT FOR THIS TASK ADR006I (001)-STEND(01), 2012.055 11:55:12 EXECUTION BEGINS ADR780I (001)-TDDS (01), THE INPUT DUMP DATA SET BEING PROCESSED IS IN LOGICAL DATA SET FORMAT AND WAS CREATED BY DFSMSDSS VERSION 1 RELEASE 12 MODIFICATION LEVEL 0 ON 2011.270 06:45:10 ADR711I (001)-NEWDS(01), DATA SET PNGG00.IT3PCK.CSDITB.D0.KS250 HAS BEEN ALLOCATED USING STORCLAS B2B26, DATACLAS @KS250, AND MGMTCLAS @959 ADR788I (001)-TDUNL(01), PROCESSING COMPLETED FOR CLUSTER PNGG00.IT3PCK.CSDITB. D0.KS250, 16552872 RECORD(S) PROCESSED ADR477E (001)-TDRF1(01), VVDS/VVR/CELL ERRORS ENCOUNTERED FOR CLUSTER PNGG00.IT 3PCK.CSDITB.D0.KS250 ADR417W (001)-TDRF1(05), COPY/RESTORE OF DATA SET PNGG00.IT3PCK.CSDITB.D0.KS250 IS INCOMPLETE, 05 ADR415W (001)-TDLOG(01), NO DATA SETS WERE COPIED, DUMPED, OR RESTORED FROM ANY VOLUME ADR480W (001)-TDLOG(01), THE FOLLOWING DATA
Re: HSM Recall Failure
Buckton, T. (Theo) wrote: Still sitting with this problem. Ouch... It seems like this is neither a HSM or a VVDS size issue. The space in the SMS pool is also sufficient to this huge data set. It seems more like a ADRDSSU issue. A restore with a rename for a similar data set was attempted, and the results were the same: 0ADR477E (001)-TDRF1(01), VVDS/VVR/CELL ERRORS ENCOUNTERED FOR CLUSTER PNGG00.CSPACK.CSDITB.D0.KS250 0ADR417W (001)-TDRF1(05), COPY/RESTORE OF DATA SET PNGG00.CSPACK.CSDITB.D0.KS250 IS INCOMPLETE, 05 Any suggestions... :( Seeing this is still hanging from last month, I'll jump in... 1. Try AMS DIAGNOSE your VVDS for errors. 2. Simply increase your job's REGION. Really, just try this. [1] 3. Did you see any other message(s) on SYSLOG? IDC3009I for example? 4. Being a RACF guy myself and based on 05 in ADR417W, verify you have accesses to all things involved: datasets profiles for new and old datasets, catalogs, vvds, volsers, ADRSSU functions, etc. 5. Based on 05 in ADR417W, try using AMASPZAP to reset the RACF indicator, and rerun the job. HTH! Groete / Greetings Elardus Engelbrecht [1] - Often, failed processes are the result of insufficient REGION size, resulting in weird results... I wonder if extra storage was needed to finalize that restore work and some (background) service could not complete its action? -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: INFO IBM-MAIN
Re: HSM Recall Failure
VVDS/VVR/CELL ERRORS ENCOUNTERED FOR CLUSTER PNGG00.CSPACK.CSDITB.D0.KS250 seems to be the root cause. At others have suggested run diagnose/examine on the affected vvds's. and catalogs. Correct any errors found and retry. It may be that the original backup was invalid. You might also check OA38052/OA37221/OA34295 depending on the size of the dataset. You could also try pre-allocating the target of the restore and use the replace keyword on the restore command. HTH, snip It seems like this is neither a HSM or a VVDS size issue. The space in the SMS pool is also sufficient to this huge data set. It seems more like a ADRDSSU issue. A restore with a rename for a similar data set was attempted, and the results were the same: RESTORE INDD(TAPEIN) - DS(INCL( - PNGG00.CSPACK.CSDITB.**, - )) - RENAMEU ( - (PNGG00.CSPACK.CSDITB.**,QNGG00.WSPACK.CSDITB.**), - ) CATALOG SPHERE ADR101I (R/I)-RI01 (01), TASKID 001 HAS BEEN ASSIGNED TO COMMAND 'RESTORE ' ADR109I (R/I)-RI01 (01), 2012.069 14:38:00 INITIAL SCAN OF USER CONTROL STATEMENTS COMPLETED ADR016I (001)-PRIME(01), RACF LOGGING OPTION IN EFFECT FOR THIS TASK 0ADR006I (001)-STEND(01), 2012.069 14:38:00 EXECUTION BEGINS 0ADR780I (001)-TDDS (01), THE INPUT DUMP DATA SET BEING PROCESSED IS IN LOGICAL DATA SET FORMAT AND WAS CREATED BY DFSMSDSS VERSION 1 RELEASE 12 MODIFICATION LEVEL 0 ON 2012.061 14:10:03 0ADR711I (001)-NEWDS(01), DATA SET PNGG00.CSPACK.CSDITB.D0.KS250 HAS BEEN ALLOCATED WITH NEWNAME QNGG00.WSPACK.CSDITB.D0.KS250 USING STORCLAS B2B26, DATACLAS @KS250, AND MGMTCLAS @939R 0ADR788I (001)-TDUNL(01), PROCESSING COMPLETED FOR CLUSTER PNGG00.CSPACK.CSDITB.D0.KS250, 30109794 RECORD(S) PROCESSED 0ADR477E (001)-TDRF1(01), VVDS/VVR/CELL ERRORS ENCOUNTERED FOR CLUSTER PNGG00.CSPACK.CSDITB.D0.KS250 0ADR417W (001)-TDRF1(05), COPY/RESTORE OF DATA SET PNGG00.CSPACK.CSDITB.D0.KS250 IS INCOMPLETE, 05 0ADR415W (001)-TDLOG(01), NO DATA SETS WERE COPIED, DUMPED, OR RESTORED FROM ANY VOLUME 0ADR480W (001)-TDLOG(01), THE FOLLOWING DATA SETS WERE NOT PROCESSED FROM THE LOGICALLY FORMATTED DUMP TAPE DUE TO ERRORS: 0 PNGG00.CSPACK.CSDITB.D0.KS250 0ADR006I (001)-STEND(02), 2012.069 14:50:23 EXECUTION ENDS 0ADR013I (001)-CLTSK(01), 2012.069 14:50:23 TASK COMPLETED WITH RETURN CODE 0008 0ADR012I (SCH)-DSSU (01), 2012.069 14:50:23 DFSMSDSS PROCESSING COMPLETE. HIGHEST RETURN CODE IS 0008 FROM: TASK001 Any suggestions... :( /snip -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of Lizette Koehler Sent: 24 February 2012 02:07 PM To: IBM-MAIN@bama.ua.edu Subject: Re: HSM Recall Failure Hi There, I'm trying to recall a data set migrated to ML2. The recall fails due to errors found in either the VVDS or VTOC. Is there somebody that would be able to point me in the right direction of investigation PAGE 0001 5695-DF175 DFSMSDSS V1R12.0 DATA SET SERVICES 2012.055 11:55 ADR035I (SCH)-PRIME(06), INSTALLATION EXIT ALTERED BYPASS FAC CLASS CHK DEFAULT TO YES RESTORE INDDNAME(SYS79943) CAT SPHERE - BYPASSACS(PNGG00.IT3PCK.CSDITB.D0.KS250 ) - MGMTCLAS(@959 ) - STORCLAS(B2B26 ) - DATASET(INCLUDE(PNGG00.IT3PCK.CSDITB.D0.KS250 )) ADR101I (R/I)-RI01 (01), TASKID 001 HAS BEEN ASSIGNED TO COMMAND 'RESTORE ' ADR109I (R/I)-RI01 (01), 2012.055 11:55:12 INITIAL SCAN OF USER CONTROL STATEME NTS COMPLETED ADR050I (001)-PRIME(01), DFSMSDSS INVOKED VIA APPLICATION INTERFACE ADR016I (001)-PRIME(01), RACF LOGGING OPTION IN EFFECT FOR THIS TASK ADR006I (001)-STEND(01), 2012.055 11:55:12 EXECUTION BEGINS ADR780I (001)-TDDS (01), THE INPUT DUMP DATA SET BEING PROCESSED IS IN LOGICAL DATA SET FORMAT AND WAS CREATED BY DFSMSDSS VERSION 1 RELEASE 12 MODIFICATION LEVEL 0 ON 2011.270 06:45:10 ADR711I (001)-NEWDS(01), DATA SET PNGG00.IT3PCK.CSDITB.D0.KS250 HAS BEEN ALLOCATED USING STORCLAS B2B26, DATACLAS @KS250, AND MGMTCLAS @959 ADR788I (001)-TDUNL(01), PROCESSING COMPLETED FOR CLUSTER PNGG00.IT3PCK.CSDITB. D0.KS250, 16552872 RECORD(S) PROCESSED ADR477E (001)-TDRF1(01), VVDS/VVR/CELL ERRORS ENCOUNTERED FOR CLUSTER PNGG00.IT 3PCK.CSDITB.D0.KS250 ADR417W (001)-TDRF1(05), COPY/RESTORE OF DATA SET PNGG00.IT3PCK.CSDITB.D0.KS250 IS INCOMPLETE, 05 ADR415W (001)-TDLOG(01), NO DATA SETS WERE COPIED, DUMPED, OR RESTORED FROM ANY VOLUME ADR480W (001)-TDLOG(01), THE FOLLOWING DATA SETS WERE NOT PROCESSED FROM THE LO GICALLY FORMATTED DUMP TAPE DUE TO ERRORS: PNGG00.IT3PCK.CSDITB.D0.KS250 ADR006I (001)-STEND(02), 2012.055 12:11:00 EXECUTION ENDS ADR013I (001)-CLTSK(01), 2012.055 12:11:00 TASK COMPLETED WITH RETURN CODE 0008 ADR012I (SCH)-DSSU (01), 2012.055 12:11:00 DFSMSDSS
Re: HSM Recall Failure
Q: Was this an EAV volume (more than 64K cylinders)? At the time of backup, if the database crossed a number of cylinder line where the x'' rolled over into the x'CCC' in x'CCChrr' (formerly c'CCHHR') value, then the ADRDSSU backup may be incomplete. At 128K, 196K (1st version), 256K, 320K, 384K, 448K, 512K, ..., 1024K (2nd version) number of cylinders. http://www14.software.ibm.com/support/customercare/sas/f/redAlerts/20120307.html Apply ++APAR for OA38942 On Fri, Mar 9, 2012 at 7:33 AM, Buckton, T. (Theo) the...@nedbank.co.za wrote: Still sitting with this problem. It seems like this is neither a HSM or a VVDS size issue. The space in the SMS pool is also sufficient to this huge data set. It seems more like a ADRDSSU issue. A restore with a rename for a similar data set was attempted, and the results were the same: RESTORE INDD(TAPEIN) - DS(INCL( - PNGG00.CSPACK.CSDITB.**, - )) - RENAMEU ( - (PNGG00.CSPACK.CSDITB.**,QNGG00.WSPACK.CSDITB.**), - ) CATALOG SPHERE ADR101I (R/I)-RI01 (01), TASKID 001 HAS BEEN ASSIGNED TO COMMAND 'RESTORE ' ADR109I (R/I)-RI01 (01), 2012.069 14:38:00 INITIAL SCAN OF USER CONTROL STATEMENTS COMPLETED ADR016I (001)-PRIME(01), RACF LOGGING OPTION IN EFFECT FOR THIS TASK 0ADR006I (001)-STEND(01), 2012.069 14:38:00 EXECUTION BEGINS 0ADR780I (001)-TDDS (01), THE INPUT DUMP DATA SET BEING PROCESSED IS IN LOGICAL DATA SET FORMAT AND WAS CREATED BY DFSMSDSS VERSION 1 RELEASE 12 MODIFICATION LEVEL 0 ON 2012.061 14:10:03 0ADR711I (001)-NEWDS(01), DATA SET PNGG00.CSPACK.CSDITB.D0.KS250 HAS BEEN ALLOCATED WITH NEWNAME QNGG00.WSPACK.CSDITB.D0.KS250 USING STORCLAS B2B26, DATACLAS @KS250, AND MGMTCLAS @939R 0ADR788I (001)-TDUNL(01), PROCESSING COMPLETED FOR CLUSTER PNGG00.CSPACK.CSDITB.D0.KS250, 30109794 RECORD(S) PROCESSED 0ADR477E (001)-TDRF1(01), VVDS/VVR/CELL ERRORS ENCOUNTERED FOR CLUSTER PNGG00.CSPACK.CSDITB.D0.KS250 0ADR417W (001)-TDRF1(05), COPY/RESTORE OF DATA SET PNGG00.CSPACK.CSDITB.D0.KS250 IS INCOMPLETE, 05 0ADR415W (001)-TDLOG(01), NO DATA SETS WERE COPIED, DUMPED, OR RESTORED FROM ANY VOLUME 0ADR480W (001)-TDLOG(01), THE FOLLOWING DATA SETS WERE NOT PROCESSED FROM THE LOGICALLY FORMATTED DUMP TAPE DUE TO ERRORS: 0 PNGG00.CSPACK.CSDITB.D0.KS250 0ADR006I (001)-STEND(02), 2012.069 14:50:23 EXECUTION ENDS 0ADR013I (001)-CLTSK(01), 2012.069 14:50:23 TASK COMPLETED WITH RETURN CODE 0008 0ADR012I (SCH)-DSSU (01), 2012.069 14:50:23 DFSMSDSS PROCESSING COMPLETE. HIGHEST RETURN CODE IS 0008 FROM: TASK 001 Any suggestions... :( -- Mike A Schwab, Springfield IL USA Where do Forest Rangers go to get away from it all? -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: INFO IBM-MAIN
HSM Recall Failure
Hi There, I'm trying to recall a data set migrated to ML2. The recall fails due to errors found in either the VVDS or VTOC. Is there somebody that would be able to point me in the right direction of investigation PAGE 0001 5695-DF175 DFSMSDSS V1R12.0 DATA SET SERVICES 2012.055 11:55 ADR035I (SCH)-PRIME(06), INSTALLATION EXIT ALTERED BYPASS FAC CLASS CHK DEFAULT TO YES RESTORE INDDNAME(SYS79943) CAT SPHERE - BYPASSACS(PNGG00.IT3PCK.CSDITB.D0.KS250 ) - MGMTCLAS(@959 ) - STORCLAS(B2B26 ) - DATASET(INCLUDE(PNGG00.IT3PCK.CSDITB.D0.KS250 )) ADR101I (R/I)-RI01 (01), TASKID 001 HAS BEEN ASSIGNED TO COMMAND 'RESTORE ' ADR109I (R/I)-RI01 (01), 2012.055 11:55:12 INITIAL SCAN OF USER CONTROL STATEME NTS COMPLETED ADR050I (001)-PRIME(01), DFSMSDSS INVOKED VIA APPLICATION INTERFACE ADR016I (001)-PRIME(01), RACF LOGGING OPTION IN EFFECT FOR THIS TASK ADR006I (001)-STEND(01), 2012.055 11:55:12 EXECUTION BEGINS ADR780I (001)-TDDS (01), THE INPUT DUMP DATA SET BEING PROCESSED IS IN LOGICAL DATA SET FORMAT AND WAS CREATED BY DFSMSDSS VERSION 1 RELEASE 12 MODIFICATION LEVEL 0 ON 2011.270 06:45:10 ADR711I (001)-NEWDS(01), DATA SET PNGG00.IT3PCK.CSDITB.D0.KS250 HAS BEEN ALLOCATED USING STORCLAS B2B26, DATACLAS @KS250, AND MGMTCLAS @959 ADR788I (001)-TDUNL(01), PROCESSING COMPLETED FOR CLUSTER PNGG00.IT3PCK.CSDITB. D0.KS250, 16552872 RECORD(S) PROCESSED ADR477E (001)-TDRF1(01), VVDS/VVR/CELL ERRORS ENCOUNTERED FOR CLUSTER PNGG00.IT 3PCK.CSDITB.D0.KS250 ADR417W (001)-TDRF1(05), COPY/RESTORE OF DATA SET PNGG00.IT3PCK.CSDITB.D0.KS250 IS INCOMPLETE, 05 ADR415W (001)-TDLOG(01), NO DATA SETS WERE COPIED, DUMPED, OR RESTORED FROM ANY VOLUME ADR480W (001)-TDLOG(01), THE FOLLOWING DATA SETS WERE NOT PROCESSED FROM THE LO GICALLY FORMATTED DUMP TAPE DUE TO ERRORS: PNGG00.IT3PCK.CSDITB.D0.KS250 ADR006I (001)-STEND(02), 2012.055 12:11:00 EXECUTION ENDS ADR013I (001)-CLTSK(01), 2012.055 12:11:00 TASK COMPLETED WITH RETURN CODE 0008 ADR012I (SCH)-DSSU (01), 2012.055 12:11:00 DFSMSDSS PROCESSING COMPLETE. HIGHES T RETURN CODE IS 0008 FROM: TASK001 ARC1001I PNGG00.IT3PCK.CSDITB.D0.KS250 RECALL FAILED, RC=0069, REAS=0477 ARC1169I RECALL/RECOVER FAILED DUE TO AN ERROR IN DFDSS *** -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of Buckton, T. (Theo) Sent: 24 February 2012 11:33 AM To: IBM-MAIN@bama.ua.edu Subject: VVDS with no catalog pointers Hi There, Please explain why not all VVDSs catalog pointers. When doing a listcat, the return is as follows: IDC3012I ENTRY SYS1.VVDS.VAPBPC7 NOT FOUND+ IDC1566I ** SYS1.VVDS.VAPBPC7 NOT LISTED IDC0014I LASTCC=4 IDC3009I ** VSAM CATALOG RETURN CODE IS 8 - REASON CODE IS IGG0CLEG-42 *** Apparently this is normal. I want to see the logic here. BTW, these are sms-managed volumes. Nedbank Limited Reg No 1951/09/06. The following link displays the names of the Nedbank Board of Directors and Company Secretary. [ http://www.nedbank.co.za/terms/DirectorsNedbank.htm ] This email is confidential and is intended for the addressee only. The following link will take you to Nedbank's legal notice. [ http://www.nedbank.co.za/terms/EmailDisclaimer.htm ] -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: INFO IBM-MAIN Nedbank Limited Reg No 1951/09/06. The following link displays the names of the Nedbank Board of Directors and Company Secretary. [ http://www.nedbank.co.za/terms/DirectorsNedbank.htm ] This email is confidential
Re: HSM Recall Failure
And why would the data set shows as online whilst the HSM recall is still in progress? -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of Buckton, T. (Theo) Sent: 24 February 2012 12:20 PM To: IBM-MAIN@bama.ua.edu Subject: HSM Recall Failure Hi There, I'm trying to recall a data set migrated to ML2. The recall fails due to errors found in either the VVDS or VTOC. Is there somebody that would be able to point me in the right direction of investigation PAGE 0001 5695-DF175 DFSMSDSS V1R12.0 DATA SET SERVICES 2012.055 11:55 ADR035I (SCH)-PRIME(06), INSTALLATION EXIT ALTERED BYPASS FAC CLASS CHK DEFAULT TO YES RESTORE INDDNAME(SYS79943) CAT SPHERE - BYPASSACS(PNGG00.IT3PCK.CSDITB.D0.KS250 ) - MGMTCLAS(@959 ) - STORCLAS(B2B26 ) - DATASET(INCLUDE(PNGG00.IT3PCK.CSDITB.D0.KS250 )) ADR101I (R/I)-RI01 (01), TASKID 001 HAS BEEN ASSIGNED TO COMMAND 'RESTORE ' ADR109I (R/I)-RI01 (01), 2012.055 11:55:12 INITIAL SCAN OF USER CONTROL STATEME NTS COMPLETED ADR050I (001)-PRIME(01), DFSMSDSS INVOKED VIA APPLICATION INTERFACE ADR016I (001)-PRIME(01), RACF LOGGING OPTION IN EFFECT FOR THIS TASK ADR006I (001)-STEND(01), 2012.055 11:55:12 EXECUTION BEGINS ADR780I (001)-TDDS (01), THE INPUT DUMP DATA SET BEING PROCESSED IS IN LOGICAL DATA SET FORMAT AND WAS CREATED BY DFSMSDSS VERSION 1 RELEASE 12 MODIFICATION LEVEL 0 ON 2011.270 06:45:10 ADR711I (001)-NEWDS(01), DATA SET PNGG00.IT3PCK.CSDITB.D0.KS250 HAS BEEN ALLOCATED USING STORCLAS B2B26, DATACLAS @KS250, AND MGMTCLAS @959 ADR788I (001)-TDUNL(01), PROCESSING COMPLETED FOR CLUSTER PNGG00.IT3PCK.CSDITB. D0.KS250, 16552872 RECORD(S) PROCESSED ADR477E (001)-TDRF1(01), VVDS/VVR/CELL ERRORS ENCOUNTERED FOR CLUSTER PNGG00.IT 3PCK.CSDITB.D0.KS250 ADR417W (001)-TDRF1(05), COPY/RESTORE OF DATA SET PNGG00.IT3PCK.CSDITB.D0.KS250 IS INCOMPLETE, 05 ADR415W (001)-TDLOG(01), NO DATA SETS WERE COPIED, DUMPED, OR RESTORED FROM ANY VOLUME ADR480W (001)-TDLOG(01), THE FOLLOWING DATA SETS WERE NOT PROCESSED FROM THE LO GICALLY FORMATTED DUMP TAPE DUE TO ERRORS: PNGG00.IT3PCK.CSDITB.D0.KS250 ADR006I (001)-STEND(02), 2012.055 12:11:00 EXECUTION ENDS ADR013I (001)-CLTSK(01), 2012.055 12:11:00 TASK COMPLETED WITH RETURN CODE 0008 ADR012I (SCH)-DSSU (01), 2012.055 12:11:00 DFSMSDSS PROCESSING COMPLETE. HIGHES T RETURN CODE IS 0008 FROM: TASK001 ARC1001I PNGG00.IT3PCK.CSDITB.D0.KS250 RECALL FAILED, RC=0069, REAS=0477 ARC1169I RECALL/RECOVER FAILED DUE TO AN ERROR IN DFDSS *** -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of Buckton, T. (Theo) Sent: 24 February 2012 11:33 AM To: IBM-MAIN@bama.ua.edu Subject: VVDS with no catalog pointers Hi There, Please explain why not all VVDSs catalog pointers. When doing a listcat, the return is as follows: IDC3012I ENTRY SYS1.VVDS.VAPBPC7 NOT FOUND+ IDC1566I ** SYS1.VVDS.VAPBPC7 NOT LISTED IDC0014I LASTCC=4 IDC3009I ** VSAM CATALOG RETURN CODE IS 8 - REASON CODE IS IGG0CLEG-42 *** Apparently this is normal. I want to see the logic here. BTW, these are sms-managed volumes. Nedbank Limited Reg No 1951/09/06. The following link displays the names of the Nedbank Board of Directors and Company Secretary. [ http://www.nedbank.co.za/terms/DirectorsNedbank.htm ] This email is confidential and is intended for the addressee only. The following link will take you to Nedbank's legal notice. [ http://www.nedbank.co.za/terms/EmailDisclaimer.htm ] -- For IBM-MAIN subscribe / signoff / archive access instructions, send
Re: HSM Recall Failure
Hi There, I'm trying to recall a data set migrated to ML2. The recall fails due to errors found in either the VVDS or VTOC. Is there somebody that would be able to point me in the right direction of investigation PAGE 0001 5695-DF175 DFSMSDSS V1R12.0 DATA SET SERVICES 2012.055 11:55 ADR035I (SCH)-PRIME(06), INSTALLATION EXIT ALTERED BYPASS FAC CLASS CHK DEFAULT TO YES RESTORE INDDNAME(SYS79943) CAT SPHERE - BYPASSACS(PNGG00.IT3PCK.CSDITB.D0.KS250 ) - MGMTCLAS(@959 ) - STORCLAS(B2B26 ) - DATASET(INCLUDE(PNGG00.IT3PCK.CSDITB.D0.KS250 )) ADR101I (R/I)-RI01 (01), TASKID 001 HAS BEEN ASSIGNED TO COMMAND 'RESTORE ' ADR109I (R/I)-RI01 (01), 2012.055 11:55:12 INITIAL SCAN OF USER CONTROL STATEME NTS COMPLETED ADR050I (001)-PRIME(01), DFSMSDSS INVOKED VIA APPLICATION INTERFACE ADR016I (001)-PRIME(01), RACF LOGGING OPTION IN EFFECT FOR THIS TASK ADR006I (001)-STEND(01), 2012.055 11:55:12 EXECUTION BEGINS ADR780I (001)-TDDS (01), THE INPUT DUMP DATA SET BEING PROCESSED IS IN LOGICAL DATA SET FORMAT AND WAS CREATED BY DFSMSDSS VERSION 1 RELEASE 12 MODIFICATION LEVEL 0 ON 2011.270 06:45:10 ADR711I (001)-NEWDS(01), DATA SET PNGG00.IT3PCK.CSDITB.D0.KS250 HAS BEEN ALLOCATED USING STORCLAS B2B26, DATACLAS @KS250, AND MGMTCLAS @959 ADR788I (001)-TDUNL(01), PROCESSING COMPLETED FOR CLUSTER PNGG00.IT3PCK.CSDITB. D0.KS250, 16552872 RECORD(S) PROCESSED ADR477E (001)-TDRF1(01), VVDS/VVR/CELL ERRORS ENCOUNTERED FOR CLUSTER PNGG00.IT 3PCK.CSDITB.D0.KS250 ADR417W (001)-TDRF1(05), COPY/RESTORE OF DATA SET PNGG00.IT3PCK.CSDITB.D0.KS250 IS INCOMPLETE, 05 ADR415W (001)-TDLOG(01), NO DATA SETS WERE COPIED, DUMPED, OR RESTORED FROM ANY VOLUME ADR480W (001)-TDLOG(01), THE FOLLOWING DATA SETS WERE NOT PROCESSED FROM THE LO GICALLY FORMATTED DUMP TAPE DUE TO ERRORS: PNGG00.IT3PCK.CSDITB.D0.KS250 ADR006I (001)-STEND(02), 2012.055 12:11:00 EXECUTION ENDS ADR013I (001)-CLTSK(01), 2012.055 12:11:00 TASK COMPLETED WITH RETURN CODE 0008 ADR012I (SCH)-DSSU (01), 2012.055 12:11:00 DFSMSDSS PROCESSING COMPLETE. HIGHES T RETURN CODE IS 0008 FROM: TASK001 ARC1001I PNGG00.IT3PCK.CSDITB.D0.KS250 RECALL FAILED, RC=0069, REAS=0477 ARC1169I RECALL/RECOVER FAILED DUE TO AN ERROR IN DFDSS *** Hi There, Please explain why not all VVDSs catalog pointers. When doing a listcat, the return is as follows: IDC3012I ENTRY SYS1.VVDS.VAPBPC7 NOT FOUND+ IDC1566I ** SYS1.VVDS.VAPBPC7 NOT LISTED IDC0014I LASTCC=4 IDC3009I ** VSAM CATALOG RETURN CODE IS 8 - REASON CODE IS IGG0CLEG-42 *** Apparently this is normal. I want to see the logic here. BTW, these are sms-managed volumes. First look at the ADR477E message. There are actually 3 reasons why it could happen. An error was encountered processing a VVR. If there was an I/O error, message ADR231E precede this message. An error was encountered on a catalog request. Message ADR497E precede this message. There be insufficient storage for internal processing. Messages ADR008E, ADR018I, or ADR376E precede this message. Looking at your DFDSS output I did not see any of the targeted messages. However, this seems to be a huge file ADR788I (001)-TDUNL(01), PROCESSING COMPLETED FOR CLUSTER PNGG00.IT3PCK.CSDITB.D0.KS250, 16552872 RECORD(S) PROCESSED So you need to 1) make sure there is sufficient space in the SMS Pool 2) make sure the VVDS and VTOC are large enough for the volumes in your pool I am curious as to why you focused on this one volume and the VVDS. I did not see any error messages targeting that volume or a vvds issue. IIRC - VVDS is done with a DEFINE command so should be cataloged. However, if there are a dasd moves or renames (volumes clipped), that might be some of the issue. Go to Option 3.4 in ISPF and just list the contents of the volume. Also do a VTOC list with 3.4. Or use ISMF to review the information about the volume and VTOC, VVDS and VTOCIX sizes. See if the volume APBPC7 has a large enough VVDS and that the VVDS exists on the volume. If so, you may need to recatalog or recover the VVDS After recovery, a BCS might not contain entries for all the VVDSs on volumes where the BCS has data sets. In this case, you might want to recatalog the VVDS so that the BCS contains entries for all connected VVDSs. If you want to recreate the BCS entry for a VVDS, use the access method services DEFINE CLUSTER command with the RECATALOG option. Specify the name, volume of the VVDS, and NONINDEXED. The BCS entry is rebuilt using information in the VVDS and the command. A VTOC entry for the VVDS must also exist. Before recovering a VVDS, decide if the VVDS is systematically damaged, or if only certain entries in the VVDS are damaged. If you cannot open the VVDS, for example, when you try to print it or access data sets
Re: HSM Recall Failure
As Lizette points out this is a fairly large file, do you have any msgs. in Jeslog such as B-37? What is the value of Volcount? SETSYS VOLCOUNT(ANY) will allow expansion to a secondary volume. ANY specifies for DFSMShsm to pass the VOLCOUNT(ANY) parameter to DFSMSdss during the ARECOVER of data dumped by DFSMSdss (L0 data sets). This parameter affects the way SMS-managed data set allocations are performed by DFSMSdss for the L0 data sets dumped from primary volumes. Refer to z/OS DFSMSdss Storage Administration for more specific information about the restrictions and limitations of the DFSMSdss VOLCOUNT parameter. The result is the allocation of the target data sets on as many volumes as required, to a maximum of 59. Thank You, Dave O'Brien NIH Contractor From: Lizette Koehler [stars...@mindspring.com] Sent: Friday, February 24, 2012 7:07 AM To: IBM-MAIN@bama.ua.edu Subject: Re: HSM Recall Failure Hi There, I'm trying to recall a data set migrated to ML2. The recall fails due to errors found in either the VVDS or VTOC. Is there somebody that would be able to point me in the right direction of investigation PAGE 0001 5695-DF175 DFSMSDSS V1R12.0 DATA SET SERVICES 2012.055 11:55 ADR035I (SCH)-PRIME(06), INSTALLATION EXIT ALTERED BYPASS FAC CLASS CHK DEFAULT TO YES RESTORE INDDNAME(SYS79943) CAT SPHERE - BYPASSACS(PNGG00.IT3PCK.CSDITB.D0.KS250 ) - MGMTCLAS(@959 ) - STORCLAS(B2B26 ) - DATASET(INCLUDE(PNGG00.IT3PCK.CSDITB.D0.KS250 )) ADR101I (R/I)-RI01 (01), TASKID 001 HAS BEEN ASSIGNED TO COMMAND 'RESTORE ' ADR109I (R/I)-RI01 (01), 2012.055 11:55:12 INITIAL SCAN OF USER CONTROL STATEME NTS COMPLETED ADR050I (001)-PRIME(01), DFSMSDSS INVOKED VIA APPLICATION INTERFACE ADR016I (001)-PRIME(01), RACF LOGGING OPTION IN EFFECT FOR THIS TASK ADR006I (001)-STEND(01), 2012.055 11:55:12 EXECUTION BEGINS ADR780I (001)-TDDS (01), THE INPUT DUMP DATA SET BEING PROCESSED IS IN LOGICAL DATA SET FORMAT AND WAS CREATED BY DFSMSDSS VERSION 1 RELEASE 12 MODIFICATION LEVEL 0 ON 2011.270 06:45:10 ADR711I (001)-NEWDS(01), DATA SET PNGG00.IT3PCK.CSDITB.D0.KS250 HAS BEEN ALLOCATED USING STORCLAS B2B26, DATACLAS @KS250, AND MGMTCLAS @959 ADR788I (001)-TDUNL(01), PROCESSING COMPLETED FOR CLUSTER PNGG00.IT3PCK.CSDITB. D0.KS250, 16552872 RECORD(S) PROCESSED ADR477E (001)-TDRF1(01), VVDS/VVR/CELL ERRORS ENCOUNTERED FOR CLUSTER PNGG00.IT 3PCK.CSDITB.D0.KS250 ADR417W (001)-TDRF1(05), COPY/RESTORE OF DATA SET PNGG00.IT3PCK.CSDITB.D0.KS250 IS INCOMPLETE, 05 ADR415W (001)-TDLOG(01), NO DATA SETS WERE COPIED, DUMPED, OR RESTORED FROM ANY VOLUME ADR480W (001)-TDLOG(01), THE FOLLOWING DATA SETS WERE NOT PROCESSED FROM THE LO GICALLY FORMATTED DUMP TAPE DUE TO ERRORS: PNGG00.IT3PCK.CSDITB.D0.KS250 ADR006I (001)-STEND(02), 2012.055 12:11:00 EXECUTION ENDS ADR013I (001)-CLTSK(01), 2012.055 12:11:00 TASK COMPLETED WITH RETURN CODE 0008 ADR012I (SCH)-DSSU (01), 2012.055 12:11:00 DFSMSDSS PROCESSING COMPLETE. HIGHES T RETURN CODE IS 0008 FROM: TASK001 ARC1001I PNGG00.IT3PCK.CSDITB.D0.KS250 RECALL FAILED, RC=0069, REAS=0477 ARC1169I RECALL/RECOVER FAILED DUE TO AN ERROR IN DFDSS *** Hi There, Please explain why not all VVDSs catalog pointers. When doing a listcat, the return is as follows: IDC3012I ENTRY SYS1.VVDS.VAPBPC7 NOT FOUND+ IDC1566I ** SYS1.VVDS.VAPBPC7 NOT LISTED IDC0014I LASTCC=4 IDC3009I ** VSAM CATALOG RETURN CODE IS 8 - REASON CODE IS IGG0CLEG-42 *** Apparently this is normal. I want to see the logic here. BTW, these are sms-managed volumes. First look at the ADR477E message. There are actually 3 reasons why it could happen. An error was encountered processing a VVR. If there was an I/O error, message ADR231E precede this message. An error was encountered on a catalog request. Message ADR497E precede this message. There be insufficient storage for internal processing. Messages ADR008E, ADR018I, or ADR376E precede this message. Looking at your DFDSS output I did not see any of the targeted messages. However, this seems to be a huge file ADR788I (001)-TDUNL(01), PROCESSING COMPLETED FOR CLUSTER PNGG00.IT3PCK.CSDITB.D0.KS250, 16552872 RECORD(S) PROCESSED So you need to 1) make sure there is sufficient space in the SMS Pool 2) make sure the VVDS and VTOC are large enough for the volumes in your pool I am curious as to why you focused on this one volume and the VVDS. I did not see any error messages targeting that volume or a vvds issue. IIRC - VVDS is done with a DEFINE command so should be cataloged. However, if there are a dasd moves or renames (volumes clipped), that might be some of the issue. Go to Option 3.4 in ISPF and just list
Re: HSM Recall Failure
Decode the following to find the explanation: ARC1001I PNGG00.IT3PCK.CSDITB.D0.KS250 RECALL FAILED, RC=0069, REAS=0477 HTH, snip I'm trying to recall a data set migrated to ML2. The recall fails due to errors found in either the VVDS or VTOC. Is there somebody that would be able to point me in the right direction of investigation PAGE 0001 5695-DF175 DFSMSDSS V1R12.0 DATA SET SERVICES 2012.055 11:55 ADR035I (SCH)-PRIME(06), INSTALLATION EXIT ALTERED BYPASS FAC CLASS CHK DEFAULT TO YES RESTORE INDDNAME(SYS79943) CAT SPHERE - BYPASSACS(PNGG00.IT3PCK.CSDITB.D0.KS250 ) - MGMTCLAS(@959 ) - STORCLAS(B2B26 ) - DATASET(INCLUDE(PNGG00.IT3PCK.CSDITB.D0.KS250 )) ADR101I (R/I)-RI01 (01), TASKID 001 HAS BEEN ASSIGNED TO COMMAND 'RESTORE ' ADR109I (R/I)-RI01 (01), 2012.055 11:55:12 INITIAL SCAN OF USER CONTROL STATEME NTS COMPLETED ADR050I (001)-PRIME(01), DFSMSDSS INVOKED VIA APPLICATION INTERFACE ADR016I (001)-PRIME(01), RACF LOGGING OPTION IN EFFECT FOR THIS TASK ADR006I (001)-STEND(01), 2012.055 11:55:12 EXECUTION BEGINS ADR780I (001)-TDDS (01), THE INPUT DUMP DATA SET BEING PROCESSED IS IN LOGICAL DATA SET FORMAT AND WAS CREATED BY DFSMSDSS VERSION 1 RELEASE 12 MODIFICATION LEVEL 0 ON 2011.270 06:45:10 ADR711I (001)-NEWDS(01), DATA SET PNGG00.IT3PCK.CSDITB.D0.KS250 HAS BEEN ALLOCATED USING STORCLAS B2B26, DATACLAS @KS250, AND MGMTCLAS @959 ADR788I (001)-TDUNL(01), PROCESSING COMPLETED FOR CLUSTER PNGG00.IT3PCK.CSDITB. D0.KS250, 16552872 RECORD(S) PROCESSED ADR477E (001)-TDRF1(01), VVDS/VVR/CELL ERRORS ENCOUNTERED FOR CLUSTER PNGG00.IT 3PCK.CSDITB.D0.KS250 ADR417W (001)-TDRF1(05), COPY/RESTORE OF DATA SET PNGG00.IT3PCK.CSDITB.D0.KS250 IS INCOMPLETE, 05 ADR415W (001)-TDLOG(01), NO DATA SETS WERE COPIED, DUMPED, OR RESTORED FROM ANY VOLUME ADR480W (001)-TDLOG(01), THE FOLLOWING DATA SETS WERE NOT PROCESSED FROM THE LO GICALLY FORMATTED DUMP TAPE DUE TO ERRORS: PNGG00.IT3PCK.CSDITB.D0.KS250 ADR006I (001)-STEND(02), 2012.055 12:11:00 EXECUTION ENDS ADR013I (001)-CLTSK(01), 2012.055 12:11:00 TASK COMPLETED WITH RETURN CODE 0008 ADR012I (SCH)-DSSU (01), 2012.055 12:11:00 DFSMSDSS PROCESSING COMPLETE. HIGHES T RETURN CODE IS 0008 FROM: TASK001 ARC1001I PNGG00.IT3PCK.CSDITB.D0.KS250 RECALL FAILED, RC=0069, REAS=0477 ARC1169I RECALL/RECOVER FAILED DUE TO AN ERROR IN DFDSS /snip -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: INFO IBM-MAIN
